Unable to connect to Wi - Fi in the guest account

Similar Questions

• Windows 8 mail, Gmail error unable to connect. Make sure that the information you entered is correct

  I tried to set up a Gmail on windows mail 8 for some time. It worked before but then I had to re - install the app and I can't seem to log in now. The only difference between now and when it worked is that I had turned on google + once I had it working the first time, but now I have that turned off.

  I always get this error: unable to connect. Make sure that the information you entered is correct.
  If I have the chance and he fails to add account, then synchronization takes a long time and emails take 5-10 minutes to arrive on the application it does to get to my account in a web browser and on my phone.
  Many users complain about this, we really need a strong response here.

  Hi Martyr844_Coffe,

  Make sure that your google account manager has granted approval of this log - in...

  From there... https://myaccount.google.com/.

  And change the account setting Gmail on Mail app account like the following picture setting...

  (To find out the specific parameters of the account )
  

• Cannot configure gmail with messaging metro app error unable to connect. Make sure that the information you entered is correct

  I was able to add an account Gmail for Windows 8 Mail App on my first install and everything worked well. Then bought an SSD and completely installed a new OS of Windows 8 it. Connected with the Live account that I used with the first installation of windows 8. All synchronized. The Mail app has Live accounts and Gmail put in place without having to re-enter the information myself. However, I noticed that Gmail sync never even when I choose sync. Removed from the account to add it again, but have failed so far. Keep gives me the error "unable to connect. Make sure that the information you entered is correct. "Tried to install it on my phone Windows 8 (Nokia 920) and he keeps asking me to re-enter the password. I'm 100% sure that I have no 2-step check set up I checked several times. Never allowed them in the first place.

  At this point, I don't know if it's Google problem or the problem of the Mail application. Any suggestion?

  I also had the same problem. I had no problem for the other three Windows 8 install / computers that I used and the last she has imported all the fine adjustments. However, I had a portable Windows 8 different today and worked alone of my three accounts to Gmail. How I fixed it:

  Of the Mail app: charms > settings > accounts > add account > other account (NOT GMAIL!)
  Click IMAP for account type, then enter your credentials as usual. It connected and synchronized immediately for me.
  Hope this helps!

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane

• I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

  I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

  Please see:

  1. Creative cloud activation and login troubleshooting
  2. Adobe Download Manager cannot happen on the Adobe servers
  3. Cloud cannot create arrived on Adobe servers.

  You can try to remove creative cloud app and reinstall it.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• No sound in my account of personal connection but its in the guest account

  I am getting no sound when I am logged into my staff/admin account, but works when I connect to the guest account

  Hi cjayet,

  · What is the number and the model of the computer?

  · Do you get any error message when you try to play any sound?

  There seems to be problem with the settings of the user account.

  Method 1:

  Make sure that you have configured the audio device by default.

  Follow these steps:

  a. Click Start, click Control Panel and then click sounds, speech, and Audio devices.

  b. click on sounds and Audio devices, and then click the Audio tab.

  c. in the reading section of the sounds, under default device, make sure the audio device is the correct default audio device.

  d. If this isn't the correct default audio device, click the drop-down list next to the device name, click the audio device you want, and then click OK.

  e. change the audio device may require that restart you your computer.

  Method 2:

  You can also run the troubleshooter from the link below:http://support.microsoft.com/mats/no_sound/en-us

  You can also check out the link below: no sound in Windows:http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Second laptop connect only with the guest account

  I have an E1500 which replaced a broken WRT54GS. I have a desktop office computer using the ethernet cable to the Internet via a DSL Modem and I have two other laptops, one is a Macbook Pro running Lion and the other is a Toshiba running WinXP SP3 using two Wi - Fi connection. Before installing the E1500 all three computers were able to connect to the internet via my secure connection, but now with the E1500, I can get the Mac to connect using my secure WPA2 Personal connection and the Toshiba will connect through the guest account. I lived the configuration wireless for the Toshiba providing several times I put in good properties wireless and network key, but it does not connect. The process of connecting Macbook was a blink of an eye without any problem. I also get Windows XP wireless connection properties back to default (WEP), because it will not hold personal WPA2 settings, but even if it contains personal WPA2 security settings it does not connect. I was also able to connect the Toshiba with the ethernet cable, without going through the wireless network.

  Why can I connect via the guest account and not via my connection on the Toshiba? Help someone?

  Thanks for the detailed explanation.

  I had actually just this solved tonight with about 2 hours of chat with Linksys. It turns out the Windows SP3 XP Toshiba doesn't have a true WPA2 - Personal encryption, only the WPA - PSK (pre-shared Key), while the Macbook Pro has WPA2 Personal. The whole system runs on a hexadecimal code 63. I got the router located on only WPA2 Personal. When I changed (manual) WPA/WPA2/joint, then I had two computers on the network. But then came another problem, when I connected with the Macbook, Toshiba has lost its connection with an error message - "IP address conflict with another system on the network. That proved to be the setting of the channel on the network. The channel was not sync from the old Linksys router configuration. Changed to channel 11 on the router to synchronize with the Macbook Pro and that has been resolved. There is no option for channels on the Toshiba that I can find.

• Unable to print from the guest account

  I have 5 PC's set up, the HP versions all the same.  All are running Win 7 Home Premium.  One of them, I can't print from the guest account.  I can print fine to the account Admin

  The printer is a network HP 1505N printer.

  I checked the Security tab & permissions - everyone is put to PRINT.  The printer appears in the list, but you cannot print to it (the "print" button is grayed out).

  I tried to remove and reinstall.

  If I'm going to troubleshoot the printer, I get "year error occurred while troubleshooting."

  The only AV/Firewall program running is Microsoft Security Essentials.

  Still, this is only a single 1 PC 5.  Help, please!

  Screenshots:
  http://imgur.com/yq9uY.PNG
  http://imgur.com/3r0z7.PNG

  Hi docsmody,

  Please see the following link for a post with a similar problem and the possible difficulty:

  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/8e7c5cec-697d-4c12-a7cf-ad8920edf67a

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Linksys e2000 - no popup comments on Wi - Fi access to the guest account password

  Hello

  I followed all the steps guide me on comments: comments connect password wireless

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=3b75609b0a90465db6229e7b2fb3942b_21449.XML&PID=96&...

  I have the password, it is set up and enabled but my main PC by using the Cisco Connect - parameters of access as a guest.

  The problem is on the laptop of comments I do not see the pop - maximum defined in

  Step 3: "once the guest access window appears, enter your guest password and click LOGIN."

  So I can't enter the password because I have nowhere to go.

  Step 3 goes on to say: "If the Guest access password window does not immediately invite, try opening a web browser and go to any website.  This will raise the window password guest access to appear."

  Tried also.  all I get is the IE error unable to connect.

  My network settings show a connection to the Linksys and bytes are fluid.

  But I do not see the password enter window.

  BTW: I plugged on the wire first and got on well.

  It won't work wireless.

  The use of Cisco Connect hell the guest account and power cycle the router.  Now go back and set up the account invited again and check.

• I cannot acess my main profile and you must use the guest account

  I cannot acess my main profile and you must use the guest account

  Hello

  There may be several error messages and/or other conditions however these methods
  should help you regain access.

  If you suspect any malware, a system restore is an option:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------------------------------------------------------------------

  Other methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• My computer doesn't let me log on my main account, only the guest account.

  I can't log on to my computer using my main account, only the guest account. It happened once before and I was able to restore to an earlier date, this time, I am unable to do this. Help, please!

  The message indicates that the service user profile does not logon that failed to load the user profile

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Installed NEWSid, restarted, now I am obliged in the guest account and can't make admin account or change the guest account.

  I had to run NEWSid due to software, I bought and installed (Stardock Objectdock) and required me to restart. Upon reboot, I had the guest account and couldn't change little matter what I tried. Here are things I tried.

  (1) goes UAC and by creating an account admin, but when I put a name in the name field, it tells me I have the invalid text when I do.

  2) restart in safe mode to create the Admin account or change the parameters of control of the accounts in this way and the same thing happens as a #1.

  Reinstall Windows Vista Home Basic 64-Bit 3) compared to the original, which does nothing to help.

  After research, I learned that using NEWSid with Vista causes this problem a lot, but the only solution I found is to use a recovery system disk (the only disc that came with my purchase of the computer has been the Cyberpower restore disc that contains only Windows Vista Home Basic 64-Bit.

  I am at a loss what to do, what I'm in the guest account and can't get out. System Restore did nothing as well until I reinstalled Vista. When I tried to run the system restore, it told me the Volume Shadow service was not working, but as part of the services, it has been set to automatic.

  Hi Rizzano,

   

  Welcome to Microsoft Answers Forums.

  If you are unable to connect to the administrator account, you will be unable to make changes on the computer by using the guest account.

  I think you did an in place upgrade which means it replaces the file system and makes no changes to the user account.

  You try to activate the construction in the administrator account and check if it works.

  If you are able to connect on windows first try to create a new administrator account.

  To activate the built-in Administrator account, follow these steps:

  
  1. click Startand type cmd in the Search boxof start.
  2. in the list of search results, right-click Guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
  5. type net user administrator , , and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.
  6. type exitand press ENTER.
  7 log off the current user account.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

   

  If the steps above does not resolve the question suggest that you try to restore the system from the mode or using the disk safe.

  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:

  1.	Insert the installation disc into the disc drive, and then start the computer.
  2.	Press a key when you are prompted.
  3.	Select a language, time and currency and keyboard or input method, and then click on Next.
  4.	Click on your computer repair.
  5.	In the System Recovery Options dialog box, click the operating system you want to repair, and then click on Next.

  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created before the problem occurred.

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Extreme problem of airport with the guest account

  It drives me crazy! I had the extreme AC router from the airport for a couple of years now. It works perfectly if the guest account is disabled. Whenever I try to enable the guest account access, I have a time very very difficult to connect to this account. The main and guest account are both set to wpa2. When I connect, I get proverbial bells and whistles go telling me airport utility system is set to be implemented via cable wan which decreases the Security (in my own home that is not a problem) and it tells me to put it in bridge not NAT and DHCP mode. If the clipping the guest account value absolutely not allow internet connection. What I am doing wrong?

  The macbook, I am trying to connect is running LION

  What is the brand and model of the modem Internet you have your AirPort Extreme, directly connected by Ethernet?

  If this device is actually a combination modem & router, then your extreme must be configured as a bridge. Guest network does NOT work in Bridge mode.

• If the pc is password protected and the guest account is turned off, a foreign body will have access to the machine or your pc? Help, please

  I want to protect my children from my pc because I don't want to access the net. So I would like to ask if my pc is protected from pw and the guest account is disabled is there another way that my child will be able to access my pc without my supervision?

  Hello

  Here is a very good explanation by Malkeleah and others in the linked Thread that explains that it is virtually impossible to stop a person access to your computer, if they really want.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/need-to-know-how-to-block-Ophcrack-from-running-my/2fe39573-7683-4a1a-A9D2-96764fce1335

  "(N'importe quel ordinateur exécutant un système d'exploitation est accessible par une personne avec 1) access physical;" (2) time; (3) jurisdiction; (4) tools. There are a few things you can do to make it a little more difficult but:

  1. define a password in the BIOS that must be entered before starting the operating system. Also to set the supervisor password in the BIOS so the BIOS configuration cannot be entered without it.

  2. starting at the BIOS, change the order of boot to hard drive first.

  3. set strong passwords on all accounts, including the built-in XP administrator account (it is disabled by default in Vista).

  4. If you leave your own account connected, use Windows key + L to lock the computer (or set the screen/power economy saver) when you step away from the computer and require a password to use.

  5. do the other accounts of users limited in XP Home, regular user accounts in XP Pro. All users must be on a Standard account in Vista with an administrator account used only for purposes of elevation.

  Please understand that these are technical answers to what is essentially a technical problem and there are ways around these precautions. It is a problem of family / interpersonal which cannot be solved by technical means.

  MS - MVP - Elephant Boy computers - don't panic! "

  And read other responses it mention password "Cracking" programs (which it's comments) which are available on Internet and other suggestions.

  See you soon.

• How can I make photoshop usable for users of the guest account?

  How can I make photoshop usable for users of the guest account?

  Hi vinturs,

  · Was there a prompt during the installation of Photoshop in what concerns users?

  · You are unable to use Photoshop in the guest account?

  Any program installed on the computer must also be available to be used by the guest account, unless as otherwise modified during the installation.