network 1316.A error error occurred trying to read the file: C:\windows\Installer\KAVKIS.msi

Similar Questions

• A network error occurred trying to read the file c: WINDOWS\Installer\iTunes.msi

  I'm not able to go to iTunes or watch videos on my program Corel due to an error in Quick Time. It keeps telling me that I need to improve my Quick time and when I tried it wouldn't let me so I tried to remove it and couldn't because of an error and then I came here to get the Windows Cleanup utility and who eventually removed the program out of my control panel and I thought that would fix it but it didn't and now it gives me this message. What should I do now?

  Ok!
  This problem occurs in all applications in all environments such as Windows XP, Amiga and Windows 7. I have only my current computer with Windows 7 64 bit related to the problem. After following suggestions to cure the problem without success, I read the error message that displayed the MSI being read in C:\Windows\Installer. There is no such MSI placed in this directory. SO to solve the problem, you must put some Apple msi installation which gives the error message in the C:\Windows\Installer directory. Just drag it directly into the directory. Do not use any subdirectory. If your don't have a copy of the MSI, you can extract it from the EXE installer with a program like WinRar. My problem was with iTunes to bleed the system looked like this C:\Windows\Installer\iTunes64.msi. Run the MSI file or the original from Apple download. It worked for me as expected if you give it a try.

• "Error 1316. A network error occurred trying to read the file C:\WINDOWS\Installer\kis.en.msi"

  Working for days trying to set up my latest software - appears to download from the site OK and runs through the entire installation to the right at the end, then shows code error above.

  I don't have any idea how to solve this problem - many attempts to find a solution/updated via Windows update site fail too miserably.

  Any suggestions gratefully received!

  Has taken a lot of time and a lot of past backward and forward over problem.  Finally I had to remove all the previous editions of the software and perform a clean installation of the new version.

  Now faced with W7 questions!  It will never end...

• Error message "network error occurred trying to read the file" xnafx30_redist.msi

  I was download microsoft touch pack for windows 7 when I received the following message: "network error has occurred trying to read from the file c:/programdata\applicationcache\xnafx_30redist.msi" and the download stopped.  I have a hp touchsmart computer, running windows 7, sp1.  is there a conflict?  What can suggest you or will they still co-exist?  Thanks for any help for the beginner!

  Hello

  1. don't you make changes to the computer before the show?
  2. which web browser is installed on the computer?

  Method 1
  I would say you can do clean start and then try to install XNA Framework. When you perform the clean boot, make sure that you disable all antivirus programs.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you to uninstall XNA Framework completely, and then download and install XNA framework from the following link. Once you install XNA Framework then Touchpack.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20914

• BlackBerry smartphones "an error occurred trying to read the media.» (Videos/YouTube) (WiFi)

  Hello

  I have a Storm 2, YouTube and videos work fine and dandy, and then yesterday suddenly YouTube stopped working. I would like to click on a video, he strives to buffer for 30 seconds, then said "an error occurred trying to read the media.» I tried to do the thing optimization YouTube, check again. I thought that maybe it wasn't the internet bad connection, since we were our friends, but he came home today, same thing happens.

  Also today I tried to record a video, and when I finished recording and tried to play, same error. I have connected my BB to my PC and played, played very well. The video is in 3GP format.

  The storm 2 is from Verizon, but it is unlocked and I am with Bell. I have not given or the internet with bell is throughout the WiFi.

  Halp meh please.

  Still, first, reboot the device...

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, try again your video playback.

• Hard drive erased, now receive the error occurred trying to read the boot configuration

  I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read the boot configuration, I tried to use the windows vista download recovery disc but when I turned on my computer nothing the same thing appeard. HELP PLEASE!

  * original title - I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read start configuration.*

  Here's how to use the Vista startup repair disk. is NOT a Vista reinstall disk.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Error1316.A network error occurred trying to read from the Visual Studio 2010 Tools for Office Runtime (x 86) fileMicrosoft \vstor40_x86.msi

  while trying to uninstall Microsoft visual studio 2010 Tools for office Runtime(x86) of the Control Panel, it is showing an error as [Error1316.A network error occurred trying to read the file "C:\Program Files\Common Files\Microsoft Shared\VSTO\10.0\Microsoft Visual Studio 2010 Tools for Office Runtime(x86) \vstor40_x86.msi"] but the physical location of the file exists.

  Hi Haran,

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://msdn.Microsoft.com/en-in/vstudio/aa718325.aspx

• LabVIEW 2013: An error occurred trying to load the assembly

  Hey all,.

  I'm trying to load a dll .NET 4.5 in LabVIEW 2013.

  When I place one of the screws .NET and try to select the one I am after it says "an error occurred trying to load the assembly" and will not let me load it.

  I also tried to import the dll, but who also gave errors.

  It's defintely a 4.5 as the reflector .NET .NET dll gives me

  [assembly: ComVisible (false)] [assembly: TargetFramework(".)] NETFramework, Version = v4.5 ", FrameworkDisplayName =".NET Framework 4.5 ")] [Assembly: SecurityRules (SecurityRuleSet.Level1)] [assembly: SecurityPermission (SecurityAction.RequestMinimum, SkipVerification = true)] '"

  To try to work around the issue of the import, I added the following to my LabVIEW.exe.config file

  
  
   
     
   
  

  but it made no difference.

  Any suggestions? All the things I've read so far are for 2010.

  SOLVED!

  I installed a 64-bit version of LabVIEW and it works. HUZZAH!

• an error occurred trying to rename a file in the destination directory code 5

  When I try the installed software on this time its error getting
  ; an error occurred trying to rename a file in the destination directory code 5

  Hi Sissi,

  1. What is the full error message do you get?

  2. This only happens when you try to install a particular program?

  3. using the administrator account?

  Step 1:

  You can try to take ownership of the file or the folder and check.

  How to capture a file or a folder in Windows

  Step 2:

  I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

• an error occurred trying to access the service

  I wonder why I bought a year subscription to Adobe Reader to convert PDF files to Doc files, when it WORKS and no one seems to be able to help me! I'm on a Mac Book Pro with Yosemite (do not upgrade it slows down your Mac evil) and whenever I try to convert a pdf file to a doc I get "an error has occurred while trying to access the service", can someone help me please?

  Hi Cedric,

  The customer service number is 800833687

  Is the direct link to chat: http://adobe.ly/19llvMN

  You must click on 'Still need help' to start the chat session.

  You get this error: "year error occurred trying to access the service", all trying to access the service by the reader.

  Try to use the link: https://cloud.acrobat.com/exportpdf log in with your Adobe ID and try to convert a pdf file to doc and check if it works for you.

  Agress,

  Rave

• An error occurred applying attributes to the file. Access is denied?

  Hello

  I use Windows 7. I reinstall my Windows 7 and since then, most of my file become encrypted (Green shows in Explorer).

  I came across a strange behavior where I am not able to use or to decrypt files. I dint knew the encryption.

  I am the administrator on my computer running Windows 7. I get the following error
  --------
  An error occurred applying attributes to the file.
  
  Access is denied.
  --------

  I have no key encryption nor do I created everything.

  I tried the following:
  When I right click on the file > properties > go to advance > uncheck the encryption > apply changes > continue (user account control) > I get this...

  "An error occurred applying attributes to the file:

  C:\Program Files\Windows Collaboration

  Access is denied.

  Ignore. Ignore everything. Try again. Cancel. »

  It is a small very annoying problem that I need to have go further, any help would be appreciated!

  Points to note:

  Safe MODE does not help.
  I am logged on as administrator, what makes it more frustrating.

  I do not know of the all other folders that Act up like this.

  Please let me know what happens! THESE FILES ARE VERY IMPORTANT

  Hello

  1. what security software is installed on the computer?

  2. what version of windows 7 is installed on the computer?

  3. of what exact file you try to remove the encryption?

  4. have you installed windows on the C partition or another partition?

  Method 1.

  To resolve this issue, give the system security principal of full control on the System Volume Information folder.

  NOTE: The System Volume Information folder is a hidden operating system folder. To display the folder in Windows Explorer, follow these steps:

  1. in the Tools menu, click Folder Options.

  2. on the view tab, clear the Hide protected operating system files check box.

  Follow the steps in this article and give full control permission to the folder. Appropriating a file or a folder: http://technet.microsoft.com/en-us/library/cc753659.aspx

  Method 2.

  I would like to create a new user account and check if the problem still persists.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  For more information: the file must be decrypted by the user who encrypted the file. The files are encrypted using the Encrypting File System (EFS) are accessible only to the person who encrypted the file, regardless of the other permissions on the file.

  I suggest you to visit these links for more information:

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  http://Windows.Microsoft.com/en-us/Windows7/use-a-smart-card-for-file-encryption

  http://Windows.Microsoft.com/en-us/Windows7/what-is-encrypting-file-system-EFS

  I hope this helps.

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• an error occurred trying to access the battery

  When I do a check of the battery, it shows that the battery is chrgead a 100% but I get the message "an error has been encountered tryinng to access the battery" brahma101

  Also when I do an análisis of the health, the update of the internet does not work although I am online!

  Hi Brahma

  You can create a detailed report on the State of the battery to double check the battery status.

  1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.

  2 in the command prompt window, copy / paste the following command.

  powercfg-energy-output %userprofile%\desktop\energy-report.html

  Press ENTER.

  This create a file named energy - report.html and place it on your desktop.

  3 go to your desktop and double-click the file to open.

  Scroll to the bottom for the battery: battery information section.

  You will see:

  Rated xxxxx

  Xxxxx full last Charge

  (Where xxxxx is a number)

  Copy this article and paste in an answer here, for analysis.

  Concerning

• an error occurred applying attributes to the file

  When I try to open some pictures, the system denies me access, I tried their decryption but get an error message and it says access denied. This has happened since the reinstallation of Vista, e efiles are stored on an external drive.

  In Windows Explorer on the root of the drive, right click and click Properties.  Go to the Security tab.  Add your name to the list of authorized users and give you all the rights and don't forget to check the box to apply it to all the files and subdirectories as well.  Then click Advanced and do essentially the same thing in the special permissions section.  Make sure that the special permissions section does not deny access to all user - if so, change it to allow access (at least read only, but no matter what type of access will make - if rejected, this entry overrides everything else).  While in the Advanced section, click the property tab and you make the owner of the car (and new check box to apply to all files and subdirectories as well).  This should solve the problem.  If you are unable to perform the tasks (you're stuck on a file or folder), try to change the folder or file directly and once done restart the whole process.  If you can't, move it temporarily to the reader until you have done the rest and then go back and try again to change - especially if it's the folder or file you are talking about.  If you still have problems with this file/folder and the following articles didn't help, after return by explaining exactly what happens or does not happen when you try to change it and I'll see if I can identify a reason and help fix you.

  Here is some additional information about the permissions and ownership in the case where you have problems or you want more details about procedures:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.