Unable to create a windows password journal

Similar Questions

• Unable to create a Windows 7 system repair disc

  Hi, I see a lot of posts on this topic on the internet, and sometimes, people seem to be able to find a solution by uninstalling specific software, etc., but there seems to be a generic instability. I have a new installation of windows 7 64-bit, fully updated, but am unable to create a repair disk through the normal channels (maintenance, backup & restore, or directly in the command prompt). They seem to everyone to start the same program, that is not instantly with the message "ERD of Microsoft Windows has stopped working" - a shaded box indicates the dialog to select a drive, is nothing to do with the output device, but immediately an error. I guess I can create a disc by various ways of downloading, but Microsoft is not possible to debug the issue? -It is very unacceptable to have no indication as to what went wrong. I see other people have provided extensive debugging information, but as far as I can see no expert never responded with an analysis of these data, except to the list of ordinary forms of the program to failure!

  When you select the option to create an ERD, the first window should allow you to select the destination dvd player. Are saying you that you do not get it right? Its actually under control panel > system and security > backup & restore

  Also, I guess you want to tell your restore disk of PC makers, from the hidden restore partition to create. If this is the case how do you create the recovery disk depends on the manufacturer of the PC, this isn't an option of victory

• Unable to create a windows 7 64 bit repair disc

  I have a Toshiba Satellite L745 S4210 with Windows 7 Home Premium. I am trying to create a system repair disc so I can undo a dual boot. However, when I followed the tutorial for the creation of the ERD, the program is not yet run for a second, then it crashes. I did research further and discovered far from the to do for Toshiba computers, but I can't do that either. Attached is image o the error messages I receive. Any help would be appreciated.

  I could find another computer with windows 7 64 and which allows to create a repair disk.

• create a windows password

  I used to have my password of windows that was removed by a person. When I went to put a password again once, it displays an option to enter a new password without the precedent (as a matter of course) but when I entered again it showed a message that the entered password is incorrect.

  kindly tell what I need to do.

  Thanx

  Looks like someone didn't delete your password, they probably just decided to bypass it entirely (autologin).

  Another possibility is that you just has not typed a new correctly both times (it allows to confirm).

  If there is another account on the PC that has administrator rights, you can use this account to force - reset the password without knowing the old.  Just open Control Panel connection of another administrator, go to your account and choose "Reset password".

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• Windows password recovery disk

  I just created my windows password recovery disk in a usb flash drive. A file was generated "userkey.psw". What happens if I save the file somewhere safe and remove the file in the flash player. Later, it will work if I have forgotten my windows password?

  Help, please...

  Yes, you can do what you want.  The important thing to remember is that you must place the userkey.psw back in the folder root of any external hard drive in order to to use.  You can move back in position using another computer if necessary.  Where keep you so far is entirely to you.

  Consider writing the password in a safe place instead.  A disc of rest password does not reach anything other than writing that can get the password down.

• I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

  I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

  I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

  Hello

  I suggest you to see link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

  Hope this information is useful.

• "Unable to create a folder of installation" when installing Windows 7 prof

  An error code appears when attempting to start the installation of Windows 7 prof. The code indicates "windows could not create an installation folder / code 0 x 8007005.» I read the community advise for this code and the answer does not cover my request. Is that what anyone has experienced the code explanation that I listed? If so, how can I fix this error code?

  My software is genuine and a complete version; (not an upgrade).

  Thank you

  Hello

  The error 0x80070005 occurs if the user has no permissions to write in a certain folder.

  Perform the steps suggested by Andre Da Costa from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-was-unable-to-create-a-required/99e62e80-230D-4c79-bdb0-7978096c6646?msgId=fc2835a3-e992-4A3D-aaef-ea9aca99889b

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Good day!

  Answer please if you face issues.

• Trying to upgrade Windows 7 Professional edition, but make error "the application cannot find one of its required files, possible because he was unable to create it in the folder".

  I'm trying to update Windows Professional and the following error message keeps appearing in the "application cannot find one of its files required, possible because he was unable to create it in the folder.  Please make sure that the folder in which this application was downloaded is accessible and not readonly.  Can someone tell me what to do?

  Hi Bill,

  Please take a look at the thread similar here, thanks to a possible correction.

  I hope this helps!

• How can I create two Windows XP ins journal for the same profile account

  How to create two window XP account but after I'm in the same document and connection setting? can anyone help? I am urgently use...

  for example

  I create UserB, wear and two user account
  the nest of access profile is userA
  what I need is UserA, connect you will see UserA profile, including all the settings such as the office and the document.
  When UserB connect it will also see the same thing as UserA is the profile of UserA. Can I know how to do? I know it's something on the registry.
  Here's a link, but I really understand now
  http://support.Microsoft.com/kb/314045
  Thanks in advance

  You cannot use them with the same profile, but you can copy the user profile to B.

  See here for more help: to copy a user profile

  You must be logged in as an administrator to do and you can't copy to or from the account to which you are connected.  If you want to copy the profile to the profile B, you need to be connected on that C and C must be a member of the Administrators group, you will have to create this account C if it is not already available (or use the built-in Administrator account).

  John

• I'm unable to open .bkf files in Windows 7 that were created in Windows XP. I downloaded the WGAplugin and I'm still not able to open the files.

  How to open .bkf files in Windows 7 that were created in Windows XP?

  See http://www.winhelponline.com/blog/restore-bkf-file-ntbackup-windows-7-vista/

  Microsoft has promised a utility, but it has not yet arrived.

• How can I change the Windows 7 password journal?

  How can I change my user login password.  My daughter figured it out!

  Hello

  This should help you:

  How to change your password in Windows 7:

  http://pcsupport.about.com/od/Windows7/HT/change-password-Windows-7.htm

  A simpler method:

  "Change your Windows password"

  http://Windows.Microsoft.com/en-us/Windows/change-Windows-password#change-Windows-password=Windows-7

  1. Press Ctrl + Alt + Delete and then click on change password.

  2. Type your old password, type your new password, type your new new password to confirm and then press enter

  3. See you soon.

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Forgotten Windows password account!

  Well, I recently changed my password to the account 'administrator '! So, technically, I lost control of my computer! I don't remember anything about my new password and never wrote the password or created a 'password reset disk'! I can't install new programs, change user settings, change files, etc because I am using the "Guest" account Please help me!

  Hello

  If you remember the old password for this account, see if this information from Microsoft helps you on how remedy:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then click Next.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.

  After you connect, you must follow additional steps, depending on the scenario you encounter.

  Other that that, we cannot help you for the reasons already given by Hetti Arachchige V Aravinda.

  See you soon.

• Unable to set the Admin password

  I am running Win 7 Home premium x 64, and both accounts were set up. A named Jamie had administrator privileges, the other named Guest had few privileges and a regular user account. I need to swop the privileges. Jamie is now the regular and guest user account has administrator privileges.

  I can set and change a password for the user account of Jamie, but it is NOT YET "ONE OPTION" change the password for the guest account (admin). I read that I could try to create a new account with administrator privileges and then uncomment or set a password on Saint Martin of into the new account. But I am unable to create a new account, as I can not enter a valid user name. I get the message, I can't use! "£$ %^&*()_+{} characters, but I'm only in alpha numeric characters. Even a letter throws the error message.

  I read that a solution would be to enter the following in a terminal back
  NET USER GUEST / PASSWORDCHG:YES
  I also tried
  NET USER GUEST password chg:YES

  but I have the following:
  THE SYNTAX OF THIS COMMAND IS

  NET USER
  [Username [password | *] [options]] [/ DOMAIN]
  Username {password | *} / add [options] [/ domain]
  USERNAME [/ DELETE] [/ DOMAIN]
  Username [/ TIME: {both |}] ALL}]

  What follows
  NET USER GUEST /PASSWORDCHG:YES
  gives me system error 5 has occurred.
  access is denied

  What is the syntax? Am I missing a space or do I need? What is a solution?

  I re-read the answers and realized that he referred to in Vista, Win 7 could not be applicable.

  I would like some suggestions.

  Hi JamesQE

  You must stop using the guest user account as soon as possible. The guest account is designed to be used by a person who wants the owner of the computer to allow the use of the computer temporarily.

  The guest account is disabled by default and should only be enabled for temporary use and then invalid later. Like most other types of user accounts in Windows this account is associated with a unique SID (security identifier) that limit the account to certain areas of the operating system.

  If there is no other administrator account on the system, I would recommend using the backup you mentioned to reinstall Windows 7.

  Let us know if you have any other questions.

  Concerning