Unable to expand the outline in the Essbase console

Similar Questions

• Unable to expand the application group in the SSP in 11.1.2.2

  Hi all

  We have installed Essbase Version 11.1.2.2 in our AIX servers successfully however when I login in shared services and under the Application Group when I select any group, I get the below error

  "error occurred beside Server during the processing of your application because of HSS or DB down"

  I checked my database of HSS that is in place and works perfectly well. Is attached to the screenshot for the same thing in my blog http://hyperion-consulting.blogspot.com

  Kindly help me in this regard.

  Kind regards

  AS

  Hi all

  Thank you very much for all your answers... I solved this problem. He comes to the end of the database. When we increased the temporary Table space... the question was solved...

• Unable to expand the virtual disk?

  When you try to extend a hard disk with vmkfstools, I get this meesage:

  Impossible to extend the drive: device or resource busy (1048585

  If I use the customer VI to extend the hard disk (only occurs with this particular drive), there are completed successfully, but no change? I'm going down this same result with vm

  I have esx3.5 VC2.5 U2 and should be able to do it while its still works.

  AY ideas would be most appreciated.

  There is overhead when you extend and you don't have enough. Not for snapshots. I would like to get busy working on a movement since you have not much room for anything whatsoever on that LUN.

• Portege M200 - unable to access the recovery console

  Hello

  Yesterday my software anti-virus let me know that a virus was trying to access my computer, had quarantined it and claimed a reboot of my Portege M200 to remove it completely. Restart, the laptop is not actually restart and just hung. It gets past the Toshiba window and crashes. I tried to start in safe mode but nothing helped. It starts to load files and crashes to a particular system file that is obviously now corrupt. I tried to enter my recovery console using Windows XP Recovery discs, but was unable to do so. The discussions on this forum have been useful, however I still have not solved the problem.

  I have my product recovery DVD-ROM, but I'm afraid to use it as the next warning with her said that reformatting will lose all my work and I do not know if it will automatically reformat my hard drive (which I have no back ups of my work) or I will give a choice? Also, I see BONES of your forums, that it will correct not actually of corrupted files. I've also seen queues to make an image ghost on a floppy drive but I don't have a floppy drive on my Portege M200.

  Can someone please provide me with the steps to solve this problem, as I am of 11 hours trying to solve this problem, but nothing helps!
  Thank you

  You are right about image recovery. Recovery image is designed to clean BONES only and there is no option for the repair of the BONE. What you can try is to get the disc of Microsoft WXP installation and Startup Repair option.

  I hope this will help you and you will be able to boot OS preinstalled. If it will work on the first back up all your important data.

• Unable to access the Virtual Console 2.0 storage

  I installed the virtual storage Console 2.0 on our server Vcenter for ESXi 5.1.0.  I now have the NetApp tab on my vSphere Client, but I get a this program cannot display the webpage error on this tab.  I'm not sure where to look to fix this problem.

  

  Of

  https://communities.NetApp.com/thread/2918?start=180&TSTART=0

  "The"cannot display page"- error can be caused by a proxy configured in the Internet Explorer settings; check if there is a configured proxy and disable it. »

• Cannot add the Essbase server in the EAS of my system

  Hello
  I have the admin rights, but I'm not able to add the Essbase server in my EAS.
  I have connection EA using the Internet link and after that I have added the Essbase server, but even after adding and the updating of the Essbase server list, I am unable to see the Essbase Server
  When I do the similar steps in another system, it works.
  
  Can is it you guys please let me know what is the solution for this.

  You probably use JRE 1.6 instead of 1.5. I had the same problem and this fixed it.

  There was a post yesterday about it:

  Failed to save the Local PC outline

• Not able to extend the Essbase in EAS Console Server - 11.1.2.3.500

  HiAll,

  We have improved Hyperion 11.1.2.2 to 11.1.2.3 and then applied the Patch.500.

  We get an error (your session is not connected to the Essbase server/agent) when we expand the Essbase server through the Regional service console. Here are the mistakes of HyS9eas - sysout.log. We are able to connect to servers via Maxl and Add-in essbase however.

  Hys9eas - sysout.log

  < 21 July 2014 1:24:44 CEST > < opinion > < Diagnostics > < BEA-320068 > < Watch "UncheckedException" with severity "Notice" on the server "EssbaseAdminServices0" released in July 21, 2014 1:24:44 AM EDT. Details of the notification:

  WatchRuleType: Journal

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))

  [WatchData: DATE = July 21, 2014 1:24:44 CEST SERVER = EssbaseAdminServices0 MESSAGE = [path of the module: easconsole ServletContext@811389807[app:EAS: / easconsole spec-version: 2.5 version: 11.1.2.0]] Servlet failed with Exception

  java.lang.IllegalStateException: response already committed

  at weblogic.servlet.internal.ServletResponseImpl.objectIfCommitted(ServletResponseImpl.java:1629)

  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:637)

  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:602)

  at jnlp.sample.servlet.JnlpDownloadServlet.handleRequest(JnlpDownloadServlet.java:191)

  at jnlp.sample.servlet.JnlpDownloadServlet.doGet(JnlpDownloadServlet.java:113)

  at com.essbase.eas.server.WebStartDownloadServelet.doGet (unknown Source)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Subsystem = HTTP USERID < WLS Kernel > = SEVERITY = error THREAD = ExecuteThread [ASSET]: '30' for queue: MSGID 'weblogic.kernel.Default (self-adjusting)' = BEA - 101020 MACHINE = AMIWSD05 TXID = the CONTEXTID = 0000KTNO5XY2vHYzLo2VOA1JmvwL0000Fj TIMESTAMP = 1405920284373

  WatchAlarmType: AutomaticReset

  WatchAlarmResetPeriod: 30000

  >

  OracleKeyStoreSpi.secretStoreSetSecret (): alias=CSF_EAS_MAP@#3#@EPM_EAS_USER exists. Update entry.

  At the CCF.500 also been applied on the server of the EAS, if it does not then it will have to be applied.

  If you connect to the same version of Essbase of EAS - 11.1.2.3.500 > 11.1.2.3.500

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cannot use the client console discovers vGpu 6.1

  Hi all

  I'm unable to use the client console after deploying machine put in common, I see a black screen.

  Master image work of the console very well and when I connect via the customer direct access overview and breath all work very well.

  I have a virtualized environment based on vsphere esx 6.0, view Server 6.1 and Nvidiia vib file NVIDIA-vgx - VMware_ESXi_6.0_Host_Driver_346.42 - 1OEM.600.0.0.2159203.vib (for cards NVIDIA K1).

  Best regards

  Once the NVIDIA driver is installed and enabled, it disables the display of the console, so this is of design and a sign of properly working config.  Direct connection is the right way to proceed, not RDP as this will bypass our driver.

  -Luke

• Unable to connect to the management console essbase server,

  Hi all..

  After having managed completely the installation and configuration of essbase 11.1.2.3 iam unable to connect to the management console essbase server,

  and also, when connecting to the oracle database, he says 'not found oracle. "

  Essbase 11.1.2.3 is installed in windows server 2008 R1.

  kindly help us.

  OK so Essbase is now running, so you should be able to test a connection through Maxl, run c:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat

  e.g. login password admin on ServerName.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Unable to see the filters in the Shared Services for Application Essbase

  Hi all
  
  I use Hyperion version 11.1.2. I created a filter in Essbase for a single Application. I gave you access to the server for the Essbase server in Shared Services. When I click on access control assign on Essbase server and after selecting the user, it does not display the filter I created in Essbase. Pls advice

  Hi, you must also assign the user access to the application of Essbase, e.g. of filters. When you assign an access control, right-click on the application, not the essbase server.
  If you have several database, then you select the database that you created the filter.

• px12-350r unable to join the domain - what now?

  Hi all!

  I hope you can give me some advice because at the moment I'm in a really silly situation, being probably locked out of my Iomega px12-350r.

  Here is what happened:

  * The device was successfully linked to my domain name Microsoft AD and worked with this config at least a year.

  * I expanded the storage matrix, 2 days adding 2 drives. Everything went well and the end of the expansion, the new total disk space is displayed correctly in the web administration interface.

  * After this, I restarted the device. After the reboot, I couldn't connect to the device more using my domain account. This account had administrative rights on the NAS and I connected on the NAS using this account before.

  * I don't alter the domain infrastructure.

  * I know that the device cannot join the domain more because I enabled e-mail notifications and he continues to send me "unable to join the domain".

  I have already tried:

  * Connection using the usual accounts: doesn't seem to work once the device is connected to a domain.

  * Connection via SSH. Does not work, probably for the same reason as above.

  I wasn't yet:

  * The user manual mentions reset the admin password by pressing the reset on the back button. But this will only reset config (I'd be okay with it), or it will erase the data on the drives as well?

  I'm from the Germany. Despite having purchased a service plan 24 x 7 hotline support German will only redirect me to the hotline American which claim to do only office, no SIN px12. I'm kinda in the middle of nowhere now. ;-)

  Thanks for your help!

  Best regards

  Florian

  Hi André,.

  I fixed it without reboot - by chance.

  In a desperate attempt, I tried to connect using the domain administrator account - and it worked! I don't remember giving any px12 admin permissions to this user and I certainly don't connect to the device using this user before. But the account has permissions to create computer accounts in the ad, and in the moment when I logged in the computer account of the AD px12 updated password.

  I tell myself that the px12 has used the account admin for re - joining the domain. From the web interface, I could now do a sync AD and after that, all users of domain reworked.

  So, if anyone has the same problem, try connecting the device with any account that has administrative rights on the whole of the field, even if you have not used the account on the device before. It can work for you, too.

  Local accounts still do not work. I think that if the device is connected to a domain and the domain link is broken permanently, so it's only the reset button.

  Andrew Merci for your support!

  Best regards

  Florian

• cannot expand the c partition in unallocated space

  I have a HP Pavilion dv5224nr laptop running Windows XP.  I've been low on disk space, so I came on this forum to find out how to remove the recovery partition, since I have the recovery CD from HP.  Now that I deleted the partition through disk management, it only allows me to expand the C partition in unallocated space left by removing the partition D.  "Extend partition" is not an option in the menu when I right click.  I also tried going through the "diskpart" command prompt, select the volume and him asking to "extend".  I received a message that it was unable to extend the volume.  How can I recover the 12 GB of space on my C drive?  Thank you.

  I downloaded a free utility called Easeus Partition Master and it worked very well for resizing my partition C.  I also used explores the function to watch the 1 gig unknown partition and it wasn't empty, so I left it alone.  Thanks for your help!

• Cannot format DVD error "unable to complete the format."

  Original title: Impossible to format error DVDs

  Can anyone help. I have Windows Vista Home Premium 32-bit with service pack 2. I'm unable to format a DVD RW it comes back with an error message saying unable to complete the format. I have tried different brands of DVD, I saw it was a mistake before service pack 2 and there was a fix. I have SP2 and it will not apply the hotfix that is a quite old. Any ideas?

  Hello

  It seems that you are unable to format DVD, you get an error that it is unable to complete the format.

  You format the drive by using the "active file system?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Run the following fix - it.
  

  Your CD or DVD drive cannot read or write media.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Method 2: Remove and reinstall the drivers for the CD or DVD drive

  To do this, follow these steps:

  a. Click Start and then click Control Panel. Click system and security, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK. Restart the computer.

  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Refer to this link.
  Format a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/format-a-CD-or-DVD

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Unable to connect the WD external hard drive

  Original title: external drive wd drive 1 TB.

  I have a problem getting my computer to accept my drive external wd on d ' training. I have a basic dell computer vista laptop.

  They have been connected for more than a year. No problems with the previous backups. The last time I used my computer for offline family history, he was running slow and not answered, then it crashed. Can only access the files already on the c drive. During an attempt to access previous back ups, model said unidentified ports connection. All I can think to try... Tried to connect to another computer in the library. Not showing no sign that it is connected. How can I get the previous files and back ups, or has permanently hard-drive?

  I hope that I haven't lost 4 years of work?

  I am not connected to the internet at home and only go on the net to my library

  Hi John,

  Thanks for the post. I understand that you are unable to connect the WD external drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3 have you tried to connect the external hard drive on another USB port?

  Please follow the methods and mark the question below:

  Method 1:

  I suggest you to run the Microsoft Fix It from the link below.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Uninstall and reinstall the USB drivers.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  Note: Connect USB devices to the computer once the drivers of conflict are uninstalled, and once the computer is restarted.

  If you are still having the same problem then you can check the device USB drivers updated using windows update.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  WD external drive is not recognized or detected in Windows XP after installation and use

  http://wdc.custhelp.com/app/answers/detail/A_ID/1695/p/228/session/L3RpbWUvMTM1MDQzMTYwNy9zaWQvQ0NTdVFVOGw%3D

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Impossible to deploy feedback and dynamic calc (property data store) to the cube of the essbase EPMA (BSO).

  Hi all

  We use the Hyperion 11.1.2.3.500 version. We have EPMA Essbase, Planning.

  Currently, we are facing 2 problems with application essbase (BSO) EPMA.

  1. the comments which are available in EPMA are not able to deploy to Essbase. Once we click on deploy option is giving in the success and also to give that error

  "Error affecting comment (account-12345) Member Accountxxx (3375).

  
  

  Tried to put comments in the essbase outline and not to deal with all the questions. So question is make observations of EPMA to Essbase.
  

  
  

  2. we have some account in which are dynamic calc in EPMA. After deployment, the members come to Essbase as store.

  
  

  Attempted to assign ownership of the data storage from the dynamic store Calc in Essbase outline, then checked and recorded. No problems were detected. It is by deploying of EPMA to Essbase.

  
  

  Thank you

  
  

  
  

  I ran into a similar issue.  You have first accounts second period?  Then try in first period and account.  It cleared my problem.