Unable to find lost speakers listed anywere
Have recently put Skype on my computer equipped with a Creative720 web cam, but I was not able to hear any conversion through my computer speakers, so I adapted a Logiteck head phone that works well but when I dissconect both a cannot find speakers to reinstall
Hello
1. which version of the Windows operating system is installed on your computer?
2. speakers recognized in the Device Manager?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the fixit from Microsoft Fixit article and if that helps.
Diagnose and automatically repair audio playback problems:
http://support.Microsoft.com/mats/AudioPlayback/
Method 2:
Try to set the speaker as a default and check if it helps.
Follow the steps to set the speaker as default:
a. click Start, type sound in the search and open sound in Control Panel.
b. click the read tab.
c. Select " speaker " icon.
d. click set as default.
e. click apply and Ok.
Method 3:
Try the steps in the following Microsoft article and check if it helps.
No sound in Windows : http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Hope the information is useful.
Tags: Windows
Similar Questions
-
Unable to find my contacts list
For a long time, everything was fine. Now, I downloaded an update and cannot find how to start. My contact list is missing and there seems to be no way to get started. I am registered OK and I credit. What should I do?
Have you actually installed Skype program on your computer?
http://www.Skype.com/go/getskype-full
You may not see your contacts or make calls from your account page on Skype.com. You need start the program Skype installed on your computer, and connect to this program.
-
Lost icon of report of trusteer, unable to find an answer on the Web site here.
I've just updated to Version 6 of Firefox, I lost the Trusteer report icon located on the tool bar, the same thing happened when I downloaded Version 5, I was hoping that my information was still available in my messages Inbox when I logged in Mozilla, but unfortunately he went, I searched the Web Trusteer site and I am unable to find anything.
Trusteer Support technical report - https://support.mozilla.com/en-US/questions/862201
We are pleased to inform you that a version of the report that supports Firefox 6 has been released and is now available for download in the following link:
If the report indicates that the version of the report that you are trying to install is older than the version already installed, please follow these instructions:
- (1) choose uninstall report
- (2) when you are prompted, select 'delete all user settings '. Please, assisted by the following image - http://consumers.trusteer.com/files/images/uninstall.jpg
- (3) reinstall report from the link above
Check and tell if its working.
-
I lost my audio icon - it has just disappeared.
After having read and followed the steps suggested by other members, I am still unable to find the tab notification area. Are there any other suggestions?Thank you!Hello
(1) you still hear sound from the computer even if the icon is missing from the notification area?
Follow the links below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-the-notification-area-system-tray
System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
-
When I did an update on the Dell computer I lost my list of favorites on the homepage
When I did an update on my Dell computer I lost my list of favorites on the homepage
CrystalBall © SEZ...
Where are my favorites in IE9? What are the toolbars?
http://answers.Microsoft.com/thread/313b8179-0aa6-422F-9ece-81e6f60f6736You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie
-
BlackBerry Z10 unable to find contacts in the Contact application
Hello
I have been using BlackBerry Z10 for a year. I was very satisfied with the performance of the device. I am indeed! but do not know what happening sudenly I'm unable to find any contact which is already available in the contacts app (NOTE: I do not use 3rd party app to store my contacts)
Software version: version of the OS installed is BB 10 OS 10.3.1.1779
This is the setting I made on my device:
Automatically merge Contcts - WE
Sort contacts by name
View the contact as -firstly, the last
Show the accounts in the list of contacts:
BBM contacts
BBM contacts video
LinkedIn
Facebook
Twitter
Outlook.com
Contacts from the SIM card
BBLink
Search using cloud is UNCHECKED.
Please do the needful.
Thank you
Nishant
Wait... you mean you installed an update of the OS? And after that, this behavior started? If Yes, then the most common thing to do after an update which translates questions is to perform a reload of the OS. Sometimes the update process have errors and others... with a reload often cure the problems.
Official methods, which will be controlled as to what exact OS versions are available:
Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:
- http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
- http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/
Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.
Good luck!
-
BlackBerry Smartphones unable to find addresses
I am unable to find the addresses I sync to my blackberry from outlook. I click on my address book and there is no listed address. When I check the properties it tells me I have 121 entries. I try to use the find command and does not pull up all the names.
Greg... Open your address book > press the Menu key (to the left of the trackball) > click on filters > uncheck all filters and save them.
Watcha see?
-
I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).
After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »
The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.
- Of course, I tried to restart.
- I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
- I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
- I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
- I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
- I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.
Everything I try seems to have no effect on the resolution of this problem.
Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?
Kind regards
Alex.
... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...
-Tried but not given to impact.
... "Step 2: System File Checker tool"...
-Tried but not given to impact.
... "I would have you check the same DVD on another computer and check if it works. '...
-The only other machine that I use Ubuntu. My other half uses only his Mac.
I managed to work around this problem by using the following workaround solution:
I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).
The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.
-
IKE initiator unable to find the policy; Outside INTF, CBC: error
I have a Cisco ASA 5505 having a tunnel at a remote office. I just put in place another identical to another tunnel and when I followed the VPN in ASDM I see that the VPN is active. But I can't ping through it. When I check the logs I see "IKE initiator unable to find the policy; Outside INTF, CBC:... "Nobody knows what might be the cause? Here is a copy of the configuration. Thank you.
See the config of bdavpn1 #.
: Saved
: Written by admin in 17:54:11.823 HAA Monday, June 7, 2010
!
ASA Version 8.2 (2)
!
hostname bdavpn1
domain.com domain name
activate the encrypted password of OSaXLnYQKkAcBhYA
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
192.168.2.100 IP address 255.255.255.0 ensures 192.168.2.101
!
interface Vlan2
nameif outside
security-level 0
IP 101.17.205.116 255.255.255.1018 Eve 101.17.205.117
!
interface Vlan3
nameif dmz
security-level 50
IP 172.20.0.1 address 255.255.255.0 watch 172.20.0.3
!
interface Vlan4
Failover LAN Interface Description
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 91
!
interface Ethernet0/3
switchport access vlan 3
!
interface Ethernet0/4
switchport access vlan 3
!
interface Ethernet0/5
switchport access vlan 4
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone AST - 4
clock to summer time recurring ADT
DNS domain-lookup dmz
DNS server-group DefaultDNS
Server name 172.20.0.99
domain.com domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network Chicago-nets
object-network 10.150.1.0 255.255.255.0
object-network 10.150.55.0 255.255.255.0
object-network 10.150.56.0 255.255.255.0
object-network 10.150.57.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 192.168.26.0 255.255.255.0
object-network 10.150.111.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.4.0 255.255.255.0
object Group Chicago-nets
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.4.0 255.255.255.0
object Group Chicago-nets
the DM_INLINE_NETWORK_3 object-group network
object-NET 172.20.0.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
the DM_INLINE_NETWORK_4 object-group network
object-NET 172.20.0.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
outside_cryptomap to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_1 object-group
inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_2 object-group
inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 172.20.0.0 255.255.255.0
inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_3 192.168.4.0 255.255.255.0
inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
Note to access list outside_to_dmz allow access to the citrix Server
outside_to_dmz list extended access permit tcp any newspaper HTTPS host 101.17.205.123 eq
dmz_to_inside allowed extended access list host 172.20.0.2 ip 192.168.2.0 255.255.255.0 connect
Note to outside_access_in entering of Citrix access list
outside_access_in list extended access permit tcp any host 101.17.205.123 eq https
outside_2_cryptomap list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
pager lines 101
Enable logging
timestamp of the record
logging paused
logging buffered information
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP verify reverse path to the outside interface
failover
primary failover lan unit
failover failover lan interface Vlan4
failover interface ip failover 172.16.30.1 255.255.255.252 watch 172.16.30.2
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 625.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
Global interface (dmz) 2
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
static (dmz, external) 101.17.205.123 172.20.0.2 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Access-group dmz_to_inside in dmz interface
Route outside 0.0.0.0 0.0.0.0 101.17.205.115 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
LOCAL AAA authorization command
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
redirect http outside 80
SNMP-server host inside 10.150.1.177 community survey * version 2 c
SNMP-server host inside 10.150.2.38 community survey * version 2 c
location of Server SNMP Hamilton, Bermuda
SNMP Server contact René Bouchard
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
inside
redirect http outside 80
SNMP-server host inside 10.150.1.177 community survey * version 2 c
SNMP-server host inside 10.150.2.38 community survey * version 2 c
location of Server SNMP Hamilton, Bermuda
SNMP Server contact René Bouchard
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map3 1 match address outside_cryptomap
outside_map3 card crypto 1jeu peer 101.88.182.189
outside_map3 card crypto 1jeu transform-set ESP-3DES-SHA
card crypto game 2 outside_map3 address outside_2_cryptomap
outside_map3 crypto map peer set 2 101.1.95.253
card crypto outside_map3 2 the value transform-set ESP-3DES-SHA
Crypto map outside_map3 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
outside_map3 interface card crypto outside
Crypto ca trustpoint bdavpn1
Terminal registration
domain name full bdavpn1.domain.bm
name of the object CN = bdavpn1.domain.bm, OR = Ltd, O is domain, C = US, St is of_confusion, L is Hamilton,[email protected] / * /
Configure CRL
Crypto ca certificate card domainincCertificateMap 10
name of the object attr cn eq sslvpn.domain.com
Crypto ca certificate chain bdavpn1
certificate ca 00
30820267 308201d 0 a0030201 02020100 300 d 0609 2a 864886 f70d0101 04050030
32310b 30 09060355 04061302 5553310 300 b 0603 d. 55040 has 13 41 53311430 04414c
12060355 0403130b 63612e61 6c61732e 636f6d30 35303130 31303630 1e170d39
3335 30313031 30363031 31395 has 30 32310 b 30 170d 3131395a 09060355 04061302
300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
06092a 86 4886f70d 01010105 0003818d 00308189 819f300d 636f6d30 6c61732e
c19012ed 02818100 4cf67378 c9347162 2bcf6519 a3ab748f 1c9cae07 5c232c93
8a 625638 68416412 and 55808768 412675bc 5906ba4a 3ffd1d101 303d0ea7 d559ccf8
0d425ffc edf1cee8 337ca5c7 5f718f2d 081551f8 fc742b78 8866de9b c82310b0
89975e30 7ea7f047 bf518ac3 aa2dfd7e f93b1016 7d5261ea 34f18fa7 748d52c8
7595ecb3 02030100 01a3818c 30818930 1 d 060355 1d0e0416 0414c1ab b8651761
fc3f12d1 b132322e be36ff6a cecb305a 0603551d 23045330 518014c 1 abb86517
61fc3f12 d1b13232 2ebe36ff 6acecba1 36 has 43430 32310b 30 09060355 04061302
300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
6c61732e 636f6d82 0100300c 0603551d 13040530 030101ff 300 d 0609 2a 864886
f70d0101 818100ad 04050003 1d558eab 05d50f7b b656e2c4 213a9ac3 1cecee73
0251f931 0b47e84f f3c0847e b2168562 d27330b3 72c8023f b83aeb4a 2db8fbf7
f4575c8e c56300aa 6d5b0fd3 092e7747 76 76286 26e81b3e 4ca35b71 792380b 9
ca480932 c58a8ee6 2fa62a73 aa1d209d 68662c 59 0b8a71f1 c2db0cbb 5aefc8c5
bedcbda7 caf46f0c b01def
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
crypto ISAKMP ipsec-over-tcp port 10000
Telnet 0.0.0.0 0.0.0.0 inside
Telnet 0.0.0.0 0.0.0.0 outdoors
Telnet timeout 120
SSH enable ibou
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 60
Console timeout 0
management-access insidea basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
prefer NTP server 192.168.2.116 source inside
NTP server 192.168.2.117 source inside
bdavpn1 point of trust SSL outdoors
WebVPN
allow outside
enable SVC
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
LtdAdmin XRlF3jA1k3JEhNgr encrypted privilege 15 password username
domainadmin encrypted E1zLpTPUtBADN9og privilege 15 password username
tunnel-group sslvpn.domain.com type ipsec-l2l
sslvpn.domain.com group of tunnel ipsec-attributes
validation by the peer-id cert
trust-point bdavpn1
tunnel-group 101.88.182.189 type ipsec-l2l
IPSec-attributes tunnel-group 101.88.182.189
pre-shared-key *.
tunnel-group 101.1.95.253 type ipsec-l2l
IPSec-attributes tunnel-group 101.1.95.253
pre-shared-key *.
tunnel-Group-map enable rules
Tunnel-Group-map domainincCertificateMap 10 sslvpn.domain.com
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 10101
ID-randomization
ID-incompatibility action log
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
inspect the icmp error
inspect the amp-ipsec
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:a23ada0366576d96bd5c343645521107Scott,
When you check the status of the two tunnels of the CLI, check the following:
HS cry isa--> of his watch as active or QM_IDLE
HS cry ips his--> shows the packages encrypted/decrypted
The second tunnel does not properly come upwards, should ensure that policies correspond to the two ends of the tunnel.
If this second tunnel is started but does not traffic, we might have a problem NAT or routing.
Federico.
-
I am unable to find all the programs and features in win7 as I want to uninstall yahoo messenger
I am unable to find all the programs and features in win7 as I want to uninstall yahoo messenger
That's what Yahoo have to say - http://help.yahoo.com/kb/index?y=PROD_ACCT&page=content&id=SLN408&actp=lorax&locale=en_US
If the control panel is set to display the categories - programs - programs and features
If the control panel is set to display the icon - programs and features.
Yahoo Messenger should be in this list.
If you say programs and features isn't in the Panel or Yahoo Messenger is installed, but not in the list, then something else is wrong.
Try
in "search programs and files" type "programs and features" (without the quotes). In the results list, you should see "programs and features" near or at the top of the list, click it. If Yahoo messenger is installed and will not uninstall, see the above link to the bottom of his page.
-
Unable to find IBM DB2 400 KMs in the new installation of 12 ODI...
Hello ODI Experts.
I was unable to find Knowledge IBM DB2 400 Modules in my new installation of 12 ODI. I missed something? I can see clearly that oracle has listed these knowledge modules in their documentation.
http://docs.Oracle.com/middleware/1212/ODI/ODIKM/DB2.htm.
Thank you
Hello
It IS that your version of 12 c ODI is 12.1.2.0.0, if yes, you must apply a Patch 17836908 on top of ODI 12.1.2.0.0 12 c and it will add the missed KM related to DB2/400 technology and more during the ODI version 12 c will increase from 12.1.2.0.0 to 12.1.2.0.1
Hope this can help you
Kind regards
Phanikanth
-
user session is having hanged... unable to find the reason
user session is having hanged... unable to find the reason
EVENT TOTAL_WAITS TIME_WAITED
------------------------------ ----------- -----------
write complete waits 2 99
wait for event Cap I have 3 4
ncreased
wait for recording to cancel 10 23
Streams AQ: Coordinator qmn wa 195 85015
iting to slave start
1277 33139 local writing queue
Streams AQ: waiting time 1814 387775623 m
falls or cleaning tasks
wait for the latch of the 3871 4707 free list
class slaves wait 12076 2682
cursor: hand S waiting on X 86248 83973
buffer busy waits 237704 62219
LGWR wait for redo copy 275440 28454
Streams AQ: qmn slowed slave 279543 767645277 wai
t
Streams AQ: qmn 580685 758502859 Coordinator id
wait for the
jobq slave wait 2676460 777336504
slave IO wait 17968952 19694460
SQL_TEXT
----------------------------------------------------------------------------------------------------
SELECT THE ROWID, RATTYP, RATVAL, FRMCURCOD, TOOCURCOD, FRMDAT, TOODAT, USRCOD, UPDDAT FROM GENCURDTL WHERE (RAT
TYP =: 1) and (FRMCURCOD =: 2), and (TOOCURCOD =: 3) order FrmDat desc, FrmCurCod, TooCurCod
SELECT ROWID, MODCOD, GRPCOD, RDOIND FROM GENGRPMOD WHERE grpcod =: 1 order by seqnum
SELECT A.DOCNUM, A.ISSDAT, B.CHGWGT, A.CURCOD, (NVL (A.WGTCHGAMT, 0) + NVL (A.VALCHGAMT, 0))
) FRTCHG, NVL (A.DSCAMT, 0) DISCOUNT, NVL (A.COMAMT, 0), A.ORGSTN | '-' || A.DSNSTN O
RGDSN, (NVL (A.WGTCHGAMT, 0) + NVL (A.VALCHGAMT, 0)-NVL (A.DSCAMT, 0)-NVL (A.COMAMT)
(0)) NET, RCC2018. GET_YLDAMT (A.CURCOD, NVL (A.WGTCHGAMT, 0), NVL (A.VALCHGAMT, 0), N)
VL(A.DSCAMT,_0), NVL (A.COMAMT, 0), A.TOTCHGWGT) YLDAMT, STAIND, A.CARNUMCOD A.RATAUDIND
, A.MOPFRTCHG, A.MOPOTHCHG, DECODE (NVL (A.AGDSLPREF, 0), 0, DECODE (NVL (B.SPLRATIDR, 0), 0))
DECODE (NVL (B.PUBRATIDR, 0), 0, 'Manual', 'TACT'), 'Spécial'), 'Spot') RATTYP, A.MLT
RATIND, RCC2018. CHECK_SPOT_RATE (A.DOCNUM, A.CARNUMCOD) SPTRATIND, A.ACCSTA, DECODE (SIGN (TOTCHG
WGT - 3 * TOTGRSWGT), 1, 'Y', ' don't) WGTEXP, RCC2018. GET_MRL_IND (A.DOCNUM, A.CARNUMCOD)
MRLIND, LOCNAM, OCDCAR, B.RATCLSCOD, C.FRCRATAUDAWB, A.DSCDUEIND, A.OTHCHGCMPIND, A.AWBTYPCO
SELECT THE ROWID, FLTNUM, FLTDAT, FRMARPCOD, TOOARPCOD, BATSEQ, ACFRGNNUM, TOTMAIBAG, TOTWGT, USRCOD, UPDDAT, REMOTE CONTROL
A, RMK, CREDAT, BATSTA, RDITRNSEQ FROM MAIBATHDR WHERE (FLTNUM =: 1) and (FLTDAT =: 2).
SELECT THE ROWID, AV7SEQ, MAIBAGNUM, MAITYPCOD, NUMPCS, GRSWGT, GRPNUM FROM MAIAV7DTL WHERE (AV7SEQ = 1).
Select sql_text from v$ sqlarea where users_executing > 0NATHALIE wrote:
user session is having hanged... unable to find the reasonHi NATHALIE,.
You need to know that the session is now. You can do it manually (try to start from v$ session_wait, v$ session_evenement to the session using CODE tags) or by using tools such as snapper.
It would be useful to see the execution plan of the query. -
Error message - unable to find the proxy server - how can I solve this problem
When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.
Set not to use any proxy.
Firefox> Preferences > Advanced > network > setting > don't score no proxy
-
Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.Help, please
Thank you
Vishal.your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .
-
Where can I find a complete list of css to userChrome.css options?
Can the title says it all really, where I find a complete list of css to userChrome.css options?
The list of mozillaZine seems massively out of date.
http://KB.mozillazine.org/Chrome_element_names_and_IDs
It is impossible to create and maintain such a list.
ID and class names can change at any time between the versions especially version beta and Aurora and night-time compilations.
You need to familiarize yourself with the help of the DOM Inspector, or ask a specific question if you need to know a selector.- https://developer.Mozilla.org/en/DOM_Inspector
- https://developer.Mozilla.org/en/Introduction_to_DOM_Inspector
You can also check some CSS files via their chrome protocol binding.
- chrome://browser/content/browser.CSS
- chrome://browser/skin/browser.CSS
Maybe you are looking for
-
REGZA WL66: HDMI input has stopped working
Hello the HDMI to my Regza WL abruptly arrested two weeks after having worked well for several years of work. Previously, the different types of devices have been recognized without any problem: DVD player, receiver, laptop, Media Player. Now, no dev
-
Black screen on Satellite A300D when the lid is closed
When I close my Satellite A300D the monitor turns off, of course. But when I open it again the screen remains black. I can hear everything is working normally (Windows Vista 32 bit). Can someone help me? Johannes
-
Possible reasons: Scripture cannot be performed because the number of data channels does not match number of channels in the task. When writing, provide data for all channels in the task. You can also change the task so that it contains the same numb
-
Impossible to download Word Document
I'm unable to open a document in microsoft word to my e-mail address. When I click on the file to open it, nothing changes except the button doesn't to what looks like the pressed state.
-
Value to automatically fill in the details on app_id block base
Hi allI have 2 control data block in my forms, is a common first name in the block and the other a name is common_detail.In my common block, there is a column called app_id and value when the same user enter this value, the remaining elements for com