Unable to get the touchpad disabled on my Asus laptop

Similar Questions

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

  Hello.

  I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

  I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

  I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

  In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

  I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

  I've updated to the last stack of Toshiba on this website, but this did not help at all.

  Here, any help would be appreciated.

  Concerning

  Matt

  Post edited by: Toxyturvy - wrong spelling

  Hello Matt

  Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

  You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
  Might find something there.

  Good luck!

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update

  I reinstalled Windows XP service pack 2-64 bit and now I am unable to get the Windows Update. Updates are more automatic since the installation and now I get the following message if I try to update manually. Help!

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  SP3 is only for 32-bit versions of Windows XP. OP has the 64-bit version of XP Pro...

• Unable to get the Windows updates. Activation of Windows icon "this copy of Windows is not activated." Cannot be enabled. Please notify.

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark to * address email is removed from the privacy *

  I was using Windows XP Professional for over 3 years with no problems. I get Windows updates automatically recently, I am unable to get the Windows updates. Activation of Windows icon is now displayed "this copy of Windows is not activated. What is going on?  Tried to reactivate without success.

  I tried with the key of product without success. Please notify. Thank you, Mark at * address email is removed from the privacy *.

  Click HERE. Follow the instructions. I recommend to use Guided Help.

• Unable to get the windows updates, it returns an error (often 0x8007043c and other similar)

  Original title: can't get windows updates

  I was unable to get the updates of windows - via the feature of automatic update, or through the manual method to access microsoft.com.  When I go to the microsoft update Web site, and it starts to scan my PC, it returns an error (often 0x8007043c and similar).  I tried to run Microsoft FixIt.  It tells me that windows up-to-date devices require to be repaired, but when I run the repair (problem-solving), he continues to run for hours and hours and doesn't do a thing.  How can I remove the software from the Windows Update Agent from my PC and reinstall a new version?

  Hi JosephGPhD,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

   

  Method 2: If the method above does not help then you can see the article mentioned below and check.

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

  Original title: Fix it center fails.

  Difficulty Center fails with the error:
  Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
  I can't find the url of re - download.
  It doesn't seem to be at the Download Center.
  Thank you
  Frank C

  Vista Ultimate 64 bit sp2

  

  CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d

• Unable to get the upgrade to Windows 7 purchased to start

  I bought an upgrade to a provider. I have acquired a product key. I invoke Windows Anytime Upgrade according to the directions and the only option is to upgrade to Vista. Then I went to the Microsoft page to buy the product. I have Vista 64-bit with all updates installed on my Toshibe Satellite computer. I ran the Upgrade Advisor and everything was satisfactory.

  Unable to get the upgrade to Windows 7 purchased to start

  I call Windows Anytime Upgrade according to the guidelines

  I have Vista 64-bit

  Windows 7 anytime upgrade: you have Vista or XP currently installed?

  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

  You can buy Windows 7 here:

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

• Error: Unable to get the 'platform' of undefined reference property or null

  I am updating a Web site on a computer that had Dreamweaver Cs4 installed as a transfer file from another computer. I get an error (unable to get the 'platform' of undefined reference property or null). The current computer has Windows7. How to upgrade to the operation of the platform within the program? What is the problem?

  What are you trying to do exactly?

  Files created in DW are not specific platform (they are just .html, .css, .js, etc.), but the program itself is when it's one of the older versions of perpetual license / disc.

  Adobe does not swap the platform for something else that current versions, however the current version (PCOC 2014) is not really specific platform more since you can have it installed on two machines, regardless of the platform. So, basically, ranking/cross-platform interchange is not permitted more.

  Product order | Platform, language Exchange

• How to get the brands of ink of my laptop screen?

  Hello

  Can someone tell me how to get the brands of ink of my laptop screen I tried everything that's happening we have you had twins boys lol

  Hello

  Sorry, can you explain your problem?
  I'm not sure what you mean exactly.

  Best regards

• having the iPad several years; I forgot the password. Tried to restore; Unable to get the new software on my Macbook to charge; always disabled iPad

  have older Ipads; I forgot the password; now disabled. Tried restore several times. My Macbook won't download new software. Several error messages.  iPad now could not be restored and open

  Hey domerdrnd74,

  Is not not be able to access you iPad because it is disabled does not for a good hour.

  If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled through the steps you need to do to get the iPad upward and running. I did these steps a few times before and they work every time. You may need to put your device in recovery mode, more than once if your internet speed is slower by downloading the restore software.

  See you soon

• Impossible to disable the touchpad on my dell inspon laptop windows 7

  No matter how I try, keyboard gets up in the middle of the text, I type.  have not been able to turn off on my computer dell laptop, windows 7

  Hello Joan.

  You must have an application on your portable computer that governs your Touchpad control. To find it, go to control panel, click Properties of the mouse, find the Touchpad tab along the top row of tabs. Click on that and you should be able to find several parameters that allow you to disable the buttons, the buttons on pointing stick and Touchpad itself. In addition, it has a checkbox to disable the Touchpad when an external mouse is detected.

  If you do not have this application, you must download it from the Dell site. To do that I need the model laptop, you have (all letters and numbers) or your number Service number (at the bottom of the laptop), as well as the version and color depth of Windows 7 you are using (Tip: go into Control Panel, click on system, the info is in the first box of information).

  After back here with your results. Let me know if you have any questions.

  Kind regards

  BearPup

• How can the touchpad disabled when my logitech mouse is plugged in via usb. When I used Control Panel to disable tp, it says that it is disabled.

  touchpad and mouse are active, even if the touchpad is disabled

  In some extreme cases, I helped people a piece of lightweight cardboard of stripes on their touchpad... Unless you have two panels of control parameters of competitors, it should really be disabled systemwide with a notch.