Unable to launch SSD Q300 HDTS748EZSTA firmware update

Similar Questions

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• Unable to launch iDRAC after Java Update for 7u51

  Good afternoon

  After getting three new PowerEdge R620s installation and connected initially to iDRAC and successful launch of the console, I have updated Java to 7u51 and now I am unable to launch the console. This behavior is confirmed for Firefox and Internet Explorer.

  Error message: missing required permissions manifest attribute in the main container: https://1.1.1.1:443/software/avctKVM.jar

  Hardware Version: 0.01

  Firmware version: 1.50.50 (Build 34)

  IPMI Version: 2.0

  This was communicated to developers Sept 2013

  Oracle has some info on that.

  https://blogs.Oracle.com/Java-platform-group/entry/new_security_requirements_for_rias

  You could add the DRAC in the list of site exceptions Java

  List of exceptional sites:

  The list of Site exceptions feature allows end-users to run Java applets and Java Web Start applications that do not meet not to the latest safety requirements. Rich Internet Applications hosted on a site in the list of site exceptions are allowed to run with the applicable security prompts.

  List of manual exceptional sites:

  https://blogs.Oracle.com/Java-platform-group/entry/upcoming_exception_site_list_in

  http://docs.Oracle.com/javase/7/docs/TechNotes/guides/jweb/exception_site_list.html

• Portege Z30A - firmware update available for PM851 SSD?

  Someone (else) have a SSD PM851 in their Toshiba Z30A? (Windows 'Device Manager' will show only).

  It has come to my attention that these drives have a serious flaw in their firmware that affect performance.
  Google search for 'firmware 840 EVO performance' to find the patches for the commercial version of the Samsung.

  Y at - it for the PM851 SSD firmware update?

  My Toshiba Z30A delivered with such an SSD.

  I've updated my machine with 840 EVO and I ve installed S... Software Wizard so I was informed about the latest firmware update and I ve installed.
  I ve checked manufacturer s page to support SSDS but I didn t find anything for PM851 SSD so I think that the firmware update is currently not available.

• Application of NEWBIE - SSD firmware update help

  Hello

  New Member looking for advice on where to start with maintenance of Sandisk ssd firmware update.

  I use an SSD on an acer AOD270 netbook. So, small screen, no CD drive etc. I couldn't not, fo are the life of me, get my Win7 starter HDD cloned on the SSD and start with reliability.

  I made the big jump, installed the SSD, installed Linux Mint with all faults, made a few adjustments and controls for noatime and trim and I am very satisfied with what I have.

  I would now like to update SSD firmware. I searched these forums and a couple other places, but I'm still a little lost. Y at - it a kind soul who can tell me the right place to start or a thread where this issue has already been resolved?

  I would be very grateful. Thanks in advance.

  The SanDisk SSD dashboard notifies you when FW updates are available, but it is for Windows only. Since you are on Linux, you can keep a watch on this forum. If a FW update is released it will be posted and stickied at the top of this map. They will post a link to the ISO standard for the FW. You can burn it on a CD or create a USB bootable out of it. Below, a message from FW update for the Extreme Pro SSD for an example. There is currently no FW for the Ultra II SSD update.

  http://forums.SanDisk.com/T5/SanDisk-Extreme-Pro-SSD/firmware-update-X21200RL-released-for-SanDisk-E...

• Dell XPS 15 SSD NVMe slow after updating the firmware July 2016 and papillonné CPU (Core i7)

  Edit: 9/2: title change intended to reflect issues of CPU throttling and discussion (second half of the thread)

  I noticed a huge performance drag after updating the firmware and drivers of my XPS 15 9550. The update took place August 4, 2016.

  Performance of my usual applications (Chrome, development tools and IDE, etc.) is dramatically lower. In general, I would say that things take about 3 times as long to arrive. I checked the CPU (normal), but also memory consumption (as normal) to discover that the problem is with the SSD drive.

  On this laptop: 500 GB NVMe thnsn5512gpu7 NV (toshiba). Attached are the results of a benchmark with AS SSD. All write speeds are appalling, to say the least... that explains a lot, but I have no idea how to solve this problem, and whether or not it really relates to the latest firmware + update drivers provided by Dell.

  (Note: I checked the BIOS, it seems that the SSD is currently configured in RAID mode.) Never touched this option before.)

  Any idea? Other affected users in a similar way. Thanks in advance.

  

  I managed to get the performance back by going to the properties of the disc and turn off windows write cache flushing heat. The two boxes should be checked. Write speed then went to about 1400 MB/s.

• firmware update

  I tried updating my two cinema Display on my iMac (27 inch, end 2013) iMac Intel Core i7 3.5 GHz 32 GB 1600 MHz DDR3 NVIDIA GeForce GTX 775 M 2048 MB tons of time, using all possibilities, but unfortunately not worked.

  What is happening with this firmware?

  Hello RUBENSCOSTA,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your Cinema Display works again is for you!

  If I understand correctly, you are unable to update the firmware on the LED Cinema Display. I would like to try the following steps to get these working again:

  1 make sure that your iMac has all available firmware updates installed as well:

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor

  2. try to follow the process in this article on the updating of the LED Cinema Display Monitor:

  On the 27-inch LED Cinema Display Software Update 1.0

  3. If you're still having problems, you can see the general troubleshooting guide:

  Get help with your Apple Cinema Display Monitor

  See you soon!

• Firmware update recent Airport 7.6.7 causing problems with VoIP

  Hi all

  Firmware update of recent Airport 7.6.7 causing problems with VoIP.

  Unable to connect voip since update...

  Any help appreciated.

  Thank you

  It might be useful to know what VoIP that you use and what type of problem the update affects your VoIP.

  My MagicJack & NetTalk lines properly.

  Jim

• New Firmware Update - where is the change log?

  I see that a firmware update was sent to my phone. However I can't find a change log. Where is it?

  Hello!

  HP and Microsoft has released an update (online) of the OTA for the X 3 elite on October 25, 2016. The update installs Windows Mobile 10 for the following versions:

  Firmware revision: 0002.0000.0014.0100

  Build of the OS: 10.0.14393.321

  Bootloader Version: 520101

  New features:

  Area	Description
  Display	High brightness Mode is activated when the brightness adjustment is suggested by default.
  Security	Reset functionality is enabled. However, the existing user must reflash phone with this software with Windows Device Recovery Tool (WDRT).

  The issues addressed (Items with * are fixed by OS updates):

  Area	Description
  Apps	App Instagram, have green lines during use is fixed.
  	Launch of view inconsistent HP on docking tools is fixed.
  Audio	Detection of the helmet is not reliable is fixed.
  Camera	Auto focus performance and stability in low light conditions are improved.
  	Model tapes preview screen is fixed.
  	Video recording after that tap put in pause/resume many times received message 'something went wrong' is fixed.
  Security	Blue BitLocker Recovery screen on reboot with active device encryption is fixed.
  User interface	Tap to wake up the wrong feature turn off screen is fixed.
  Hello Windows	IRIS is unblock, followed by sweeping to unlock quickly led to the prompt error is fixed.
  	Fingerprints and Iris being setup one after the other, one of them will not functional, is fixed. **

  Known issues:

  Area	Description
  Apps	Skype for business app can be run from external display of Continuum.
  Connectivity	Dock desktop LAN port of HP has no configuration of the user interface.
  User interface	Missing tiles with update settings. The user can go to the list of applications, press the settings icon and select PIN to start restoring the tile.
  	Tile 2 Messaging becomes white with update. Touch on the tile once it restores.
  Security	Too many failed unlock attempts, the device will be blocked for security reasons. User can unlock the unit to https://account.microsoft.com/devices.

  Thank you

• Portege R400 - Firmware update fails for 3G card

  During the Firmwareupgrade of the G 3 embedded (expedite EU870D) in my protégé R400 card, I have a power fail. The next time you start, I can't countinue with the upgrade. The card no longer works.

  The Modem and the COM Ports, I don't see in Device Manager. Is there a solution for this error? Thanks for the help!

  Pumbkin

  Why do the update of the firmware?
  You should do this only if the Vodafone SIM card does not work properly!

  I found this info that pop ups before performing a firmware update!

  + Atten-tion of the FW update: +.

  + Please do not forget to read carefully before place the FW. +

  + 1. FW update is not necessary when the Vodafone SIM card works fine in the customer environment s. run the FW update only when the Vodafone SIM card is not detected. Please note that the FW is more reversible to the previous state once updated. +

  + 2. This upgrade tool will apply to the following models with built-in 3G module: +.

  + Portege R400 +.
  + Portege R500 +.
  + Tecra M9 +.

  + 3. Please leave 3G communication and close the connection utility before running the FW update. +

  + 4. Close all applications before you run the FW update. Please DO NOT launch any application during the upgrade process. +

  + 5. Please ensure that you use an AC adapter to power the computer during the process of FW update. Power failure during the upgrade process can lead to failures of 3 G modem. +

  + 6. Please DO NOT sleep/standby extended/Shut Down the computer during the process of FW update. This can lead in mode 3G +.

  So please first these points before you is trying to update the firmware!

• HP zBook Studio G3: zBook Studio G3 - DEATH BY INTEL ME FIRMWARE UPDATE

  WARNING!

  DO NOT INSTALL THE UPDATE OF THE COMPONENT OF THE (COMPANY) INTEL MANAGEMENT ENGINE FIRMWARE!

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8934841 & swItemId = ob_159465_1 & swEnvOid = 419...

  Component Firmware Intel management engine (ME) (American International)

  11.0.0.1194 Rev.A
  December 1, 2015

  We bought 5 of these laptops for our Engineering Department and I was against a tight schedule to get them deployed (the next day). I started working on obtaining a set of installation with the necessary software and then I just want to clone one for the other 5.

  I did a clean install of Windows 10 and installed all the drivers from the HP site. Then I ran Windows updates until everything is up-to-date. I disabled Windows Defender. Now all that remained was update the firmware BIOS, Intel ME and Thunderbolt using the downloaded utilities since the page drivers. The BIOS installed fine, but it's a really weird update process. Due to the beeps and lights blink during his work. There is no progress bar to let you know if she is doing anything. At some point, as the beeping stop but it's still really work. Then he starts and updates another part of the system and so on. Anyway, that everything worked fine. No problem with the update and Windows 10.

  So I ran the update of the Firmware of Thunderbolt and open up a command window saying that it couldn't find the controller. It looks like not there nothing after that point and just closed.

  Finally, I ran the Intel Management Engine firmware update utility. He opens a command window and says that it is loading the file and check and so on. Then he wrote the Flash file and takes a minute or two, doing so. Once it's done, the firm order window and back to business as usual... until you restart. Once you do this, the system is toast. It does not start. Black screen, fans run at high speed and the CapsLock and NumLock bulbs only 5 slow flashes indicating that there is something wrong with the motherboard. I'm starting a supported by HP chat session.

  I am told to disconnect the battery. To access the battery, you need a bit T - 8 Torx and you unscrew 11 screws to remove the grill cover and low fan (pedestal). I did that and disconnected from the battery. Reconnect after a few minutes and tried to start. Nothing, same thing. The support agent told me that a technician on site should be sent to replace the motherboard.

  While the lower lid has been opened, I noticed that there are two small LED lights near the SSD. There are supposed to be the diagnostic lights and I found an article in the service manual indicates if one of the LEDs is lit, the motherboard should be replaced. This lights a few seconds after the connection of the power supply for the laptop or by pressing the power button.

  I asked the support agent if they knew why it happened, but they did not know.

  So, I got 4 portable more to work with. I took off the dead laptop SSD and put a charge in a brand new out of the box. Started by and on the desktop Windows 10. This laptop had BIOS v1.03 on this subject so I ran the BIOS updated and rebooted. All right. At this stage I myself asked to perform other upgrades of the firmware or not. I thought that I had a 50/50 chance and I'm the kind of person that simply be whether it was a fluke or if there really was something seriously wrong with the update of the Intel ME firmware. He ran while first instead of love at first sight to date. Update Intel did ME the same thing before, opened a window to order, checked and then flashed... and after a reboot I got another laptop dead.

  At this point, I shook my head and frowned, looking at the HP logo.

  I tried calling support, but their laptop zbook/computer service has been closed from 10 is no support by phone or chat support. I have to wait until the morning to make a call in warranty for this second laptop dead.

  The Intel ME firmware update released on download of HP ZBook Studio G3 section was not compatible with these laptops and caused the laptop no longer starts. Only an exchange of motherboard could solve the problem. HP since then changed the link to the Intel ME firmware update for the appropriate softpaq.
  
  Those who had run the update of the bad firmware and their laptop brick had to call the HP technical support to schedule a replacement motherboard on the spot.

• DVRW firmware update killed

  I have acquired a used model m7790y Pavilion Media PC with some problems.

  The original owner had not created the recovery disks. I was initially unable to succeed in their creation, so I ran to the recovery of the recovery partition, using the start option. That's happened. I could eventually create the recovery (on 2 discs DVD + R) media. If the drive worked there at that time.

  After that, I have treated all updates Vista SP1 til. Then, I have treated several updates HP found in the x 32 area of Vista software and driver download for the system, including an updated firmware for the optical drive from TSST. Then, I treated all other Vista updates thru SP2 and beyond. I thought that everything was fine but then I tried to open the optical drive and it did not. Then I noticed that a light shone from the reader. Windows does not currently show a DVD player device, but because of BIOS. It shows in the BIOS as the 3rd drive: TSSTcorpCD/DVD. The update of the firmware, I treated is sp35094.exe and has been marked as TSST TS-H653L DVD-R/RW Drive Firmware Update Version 0714.

  I have redownloaded update and tried to re - run. It fails, saying that the system does not have the minimum requirements for the update. As the drive is not listed in the Device Manager, maybe it's to be expected. I don't think that it produced an error the first time. Both times I ran from within Windows Explorer.

  Is it possible to fix this drive or is it now a brick?

  The device is seven years old. It's a brick.

  Replace the DVD burner with a new DVD of SATA burner. They are pretty cheap these days and about $20.00.

• Vista x 64 - Windows Media Center - error: invalid Application. Unable to launch «»

  After a new installation, with two Service Packs included and all other updates and software, clicking on Netflix in Windows displays the following error message, "invalid Application. Unable to launch ' ' '.

  Silverlight is installed.

  Netflix works on IE and Mozilla.

  I had tried all the solutions listed here and came away empty-handed. For some reason, the update is applied to Windows Media Center via the Update window fails to properly install the Netflix plugin. I even contacted Microsoft Support who told me that I would have to pay $99 that the solution could take over an hour to solve.

  I solved it in 5 minutes.

  http://download.Microsoft.com/download/D/D/8/DD8BD495-9A5A-46DB-B95E-A846AF35915E/NetflixInWindowsMediaCenter.exe

  My friends this is the link for the download of the plugin directly from Microsoft. After you install everything worked dandy.

• DSC-hx200v for remote usb firmware update?

  The DSC-HX200v is a nice camera, but it has some annoying features.

  Top of my list is unable to disable filtering of noise - it can be set to high or low, but even 'low' causes really ugly image artifacts.  For detail work, it would be preferable to disable filtering altogether in the device and use image processing software to clean the sensor noise.

  Second on my list is the lack of a remote - camera trigger must have at least one command trigger USB, or a more complete control APIs, to allow a laptop computer collect the series Time lapse.

  My third wish list is trivial - adds an average speed (4 to 5 fps) burst mode.  I had many opportunities when 10 FPS is too fast and 2 images per second is far too slow - intermediate dieting (or the ability to set the value of fps as you can the shutter speed and ISO) would be just the ticket.

  So my question is if Sony ever plans to publish an update of firmware for this device, and if so, what changes are planned?

  Hi Tad,

  These are good options. Firmware updates are released frequently to provide enhancements to existing features. Our engineers regularly focus on these positions. I don't know that they're going to try to incorporate these options in future models.

• Unable to launch application - EAS

  Hello
  
  I can fire up EAS on the server (by using the console), but when I use explore other customers.
  
  I get "unable to launch the application" application error EAS name,.
  
  When I click Details-> unsigned resource (http://servername:10080/easconsole/easclientplugin.jar) entry found error
  
  I applied planning patch 9.3 . 1.1.16 (that I also updated easclientplugin.jar)
  
  
  Help, please

  You patch EAS with the right files to the patch of planning?

  See you soon

  John
  http://John-Goodwin.blogspot.com/