Unable to load up on my side of the administrator of the computer to load in safe mode but will not when windows loads any suggestions message cannot load profile

Similar Questions

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program

  My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program. How can I fix it so the SLL laucher works.

  Sorry, it's a product of the gainful. I can't test it. Go to http://support.vocalocity.com/ for support.

• Unable to upgrade to Windows 8.1, Windows store does not and will not install Windows Update.

  Original title: hard to upgrade to 8.1 - My App store Windows will not open, Windows updates Pc settings does not.

  Everything on my laptop is saying that it is "not responding" - opening of the photos, for example. My apps are no longer compatible - for example my e-mail address is not updated. I think it's all related to not updated to 8.1 - having a knock on effect to all the other bits on the laptop.

  The problem is won't let me upgrade. I understand that it is a slow process, but it won't let me even go up to the store to upgrade. What can I do?

  Really sad about that I just bought my laptop 3 months ago a result already loads of problems with it. (ACER LAPTOP WINDOWS 8)

  I had the same problem and finally came up with this fix. I hope it works for everyone who suffered from this annoying problem. Go to control panel, system, and security, the Action Center. In the center of the Action, open the settings Windows Smartscreen. Do not do anything (turn off Smartscreen Windows) check.

• Photoshop does not open all the files on my Imac it will open work and recent files very well but will not save. I have the latest version. What is "cleanmymac3" that prevents the loading of files?

  Photoshop does not open all the files on my Imac it will open work and recent files very well but will not save. I have the latest version. What is "cleanmymac3" that prevents the loading of files?

  I must add that when I try and open a file, it freezes and I have to force photoshop completely.

  Try resetting your Photoshop preferences.

• Using a Vista laptop, connects to the internet, but will not load page. DNS problem.

  Hello.

  I use a Toshiba laptop with Windows Vista Home Premium 64-bit.

  I just have a modem and use a router. I have a network cable (cat 5) connected to my laptop and the modem. I have log-on internet and it connects. But when I open Google Chrome, IE9 or Firefox I can not load a web page. Google mentions something about the DNS cannot be found and DNS_Probe_Finished_No Internet.Frefox says server not found.

  I click on the Menu start - Connect To - I am logged in. I already typed my password in the command prompt and appropriate the pppoe connection/address (I use ADSL).

  I talked to my ISP and we tried to do certain things. But nothing works. On their end, it shows that I am connected. But I can't browse the internet. We tried to have the DNS and IP address for ipv4 set to obtain automatically and I put 2 numbers of DNS in manually once the settings have been changed to the favorite servers and DNS auxiliary, or worked.

  Using command prompt, the DNS has been emptied. It did not help. The modem has been reset the ISP location. I also recreated and set up a new network connection.

  My office is using the same pppoe information. I can freely browse the internet and I use Windows Vista Home Premium 32-bit. I was also shown to be connected simultaneously with both machines, but that the Office can go.

  I do not have Windows Update the laptop since on April 2016. It has not been used and the battery was empty. I tried to turn off the laptop several times, but nothing works.

  Y at - it suggestions to solve this problem? At that time perhaps a re - install will work.

  System Restore worked. I will run the updates and see what happens.

  I think it was a program that I uninstalled in programs and features.

  It's also useful information for this post: https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/unable-to-connect-internet-dns-error-windows-7/72040e27-7a87-4f6f-88d6-9d158da38de8

  1.

  Note

  • You must open a command with elevated privileges prompt to complete the following steps. For more information, see command prompt: frequently asked questions

  1. Click the Start button.

  2. In the search box, type command prompt.

  3. In the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. At the command prompt, type ipconfig/flushdns.

  2.

  Start - Search programs and files
  Type "Command Prompt".

  Right-click in the program file that appears above the run as administrator.

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

• Once I refreshed, when I go to pull down to a previous visit, it loads the address bar, but will not go on the site.

  Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP

  You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.

  • Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0

  Make sure that you are not Firefox running in compatibility mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• iPhone 5 s watch the load but will not load

  My iPhone 3 months 5 s done this time in ten days. When the charger is plugged in, it shows the loading sign. But the percentage has not increased and finally the battery gets drained. After that, it shows the screen below. I tried to charge the phone after that continuously for more than one day and not luck. Instead forge the phone for a day or two and plug the charger - it comes up with the apple logo. And behaves a good boy a week before the issue resurfaced surface again. Tried all the settings I found on the internet and no luck. It does not start in safe mode as well.

  

  I took it to the istore. They tried to Flash, check the battery performance. Everything was perfect reported. After a day with them, he would be back to normal and they return saying that the problem is solved. They seemed helpless. However, I managed to show them the question to live when he did not, and showed support. It has been three times I gave the phone to the istore and had back in the same State.

  I'm the only person who is faced with the question of all the lucky iphone owners?

  Should I ask for a replacement? I am facing this problem since the first week, I started to use the phone. The inconsistent behavior irritates more that guys istore says they will not be able to request a replacement. Ask a serious help in this. I don't think I can live with that.

  I think that this forum is noticed by the technicicians\officials of Apple. Any help on this would be much appreciated!

  Thank you!

  See you soon!

  Amandine

  Hello

  Back iPhone to store ask for a replacement.

  Your iPhone has had an intermittent fault

  See you soon

  Brian

• FF4, Win7 - is possible to pin history on the left side of the page, rather than having it open as a whole "nother window? (Where it was!)

  FF4, Win7x64 - is there a way to pin history on the left side of the FF page - as it was - rather than having to click on bookmarks and a new window opens and then must click history etc etc etc -

  Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

  Then you go to the view menu: view > sidebar

• Envy 15-j051: my HP Envy 15-j051 does not load when the computer is on, but will charge when turned off

  whenever I'm on and trendy get plugges but do not load, but when I stopped and keep power connected it charges the battery. I checkd the battery and it says primary school-OK (1) tell systems check all past

  @lagrit1023 ,

  Hello and thanks for the display on the HP support forums.  What you have going on here, it's a problem with the regulation of power on the motherboard or a problem with not enough amps from the power supply.

  Can you try feeding on a laptop or have a place that you can take to check?

  The only other way to check if you have already made the checks of the battery and so on is getting the system sent repair.  To do this, you will need to contact the HP support by phone.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• OfficeJet Pro 8610: Scanning both sides of the computer does not not on officejet pro 8610

  Hello

  Help, please!

  Set up: Officejet Pro 8610 connected wireless for HP laptop Windows 10.

  Mission: I have 10 A4 sheets with stuff on both sides. I want to scan every 20 faces and save them on my laptop in the right order.

  I would like to do this automatically thought IE the automatic document feeder.

  I use scan options HP Scan and Capture software in document settings

  I select the source to be "heavy feeder" and duplex scan (if available) option I select '2 Facer.

  Although this force the 8610 take the original since the ADF doc it's only one side.

  That's the problem!

  Also if I use the HP Officejet Pro HP printer Assistant, if I select the radio button for the front and back, once its done scanning side 1 of the document it asks me to take the originals and put them in the feeder to make the other side. The scans are then coming out in the wrong order!

  I bought this printer so I could do it, but can't make it work. I want to cry. Help, please.

  Thank you

  Hello

  The HP Officejet Pro 8610 does not support scanning duplex automatic, that the more advanced of this series models supports a such (8620 & 8630 models)

  You can find the printer specifications listed below:

  Breeze through multipage documents with automatic two-sided scanning and the 50-page auto document feeder (for 8620/8630 only).
  

  http://www.HP.com/hpinfo/newsroom/press_kits/2014/OJPro/OfficejetPro8610_8620_8630.PDF

  You can only perform this manually with your printer model, I suggest to use the HP scanning software.

  If the analysis is delivered in the wrong order, try to install and use the HP extended Scan application and check differences:

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Hope that helps,

  Shlomi

• My 'side' of the computer has suddenly lost all my settings.

  In the last days, when I opened my "side" of our computer, my original settings have disappeared. I had to search to find my documents (always there, but required a research); the office is not my own wallpaper; the "Start" menu has been restored; and, apparently, I have to reconfigure my settings. "" My wife is very well. The first time it happened, I rebooted. The computer showed me a blue screen and started a scan of the hard drive. He apparently removed a number of files automatically - do not know what they were. I use Norton 360 and look for the updates and quick analyses, every day. Any help would be appreciated.

  It sounds as if your user profile is damaged and that Windows has created a new profile based on the default template (which, naturally, does not all custom data from your original profile).

  The best way to deal with such a situation is to create a new profile and then remove all the profiles used more copy the information from the damaged one.

  You will need to use a profile with "computer administrator" privileges to follow the instructions below.  If your woman profile has privileges, then you can use it.  Otherwise, you can log in to the built-in "Administrator" account (default password is empty, that is, no password).  The account 'Administrator' are accessible from the homescreen mode without failure or (for XP Pro only) in the home screen with no one else connected by pressing twice CTRL + ALT + DELETE).

  The directions are here: http://support.microsoft.com/kb/811151

• Fix - It says no problem, updates the load but will not be installed. Error 'WindowsUpdate_0000057A' "Windows update_dt000".

  Fix there work and corrected updates, but updates the load upwards and will not be installed. Error 'WindowsUpdate0000057A' 'Windows update_dt000' on control spent installs almost all office 2003, Excel, Word etc failed sine 5/12 2012.

  See if this helps: http://support.microsoft.com/kb/906602

• Monitor leaving them a 2-inch screen on the right side of the computer laptop hp Compaq cq40

  Original title: full screen

  After that I installed Windows 7 in my hp Compaq cq40 laptop monitor leave a 2-inch screen on the right side of the screen. I have set the screen resolution, reinstalled the latest driver. but still the screen is not displayed in full screen. If I install Windows Xp, then the display is in full screen mode. How can I get a display full screen with windows 7?

  Hello

  I suggest you to check if the steps help.

  In Windows 7, click on the F11 key at the top of your keyboard. This will make Windows return a mode full-screen.

  To cancel the mode full-screen and window restoration to normal display, press the Esc (Escape) key at the top of your keyboard.

  Check your graphics card catalyst Center and change the settings from there.

  I also suggest you go through the help article and check that it helps.

  Use and adjustment of your monitor

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c01641922&LC=en&product=3752104#N1377