Unable to log-in in the database
Hi gurus,I installed oracle 10.2.0.4 on my laptop.
but not able to log in inside.
now I get ora-01017
I tried loging in using System/Manager...
so should what username I use?
Thank you
Jack
When you created your database, this password did fill up?
"manager"?
In addition, you can change the password of the system...
Set ORACLE_SID = DB
sqlplus / as sysdba
SQL > alter the system of the user identified by the Manager.
Enjoy & good luck
Tags: Database
Similar Questions
-
Unable to log on to the device - Mac OSX 10.9.3 scanning - M1217nfw
Hello
I'm running into some problems of scanning wireless to our HP LaserJet M1217nfw MFP of any Mac running 10.9.3. I tried "Reset Printing System" and re-add the printer without success. Whenever I open a preview/Printers & Scanners/Image Capture, I get the following error message: "Unable to log on to the device." When I add the printer, I do it by clicking on the icon "+" and selecting "add printer or Scanner...". ", select the printer in the list via Hello and 'Select software' but my printer model is not listed. The closest printer listed is HP LaserJet Professional M1210nf MPF Series, but it does not work. Any ideas here?
Welcome to the Forums of HP jpuebla,
I see by your post that you are having problems of analysis, you can't find the drivers to add the printer.
I can help you with this problem.Maverick pilots are the Apple update drivers.
V10.9 OS X Mavericks: installing and using the printer on a Mac.
Fix permissions of the drive on the Mac: -
Original title: problem: Guest account does not work even after activation due to profile problems.
After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:
- Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.
DETAIL - access is denied.
- Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
- Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.
DETAIL - access is denied.
- Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.
RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.
The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.
I'm running Windows 7 Ultimate x 64 edition.
Christopher S. Charabaruk
Well guys,.
The simplest solution is to read what the error.
"Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"
I tried a lot of suggestion, but delete the file crazy and that's all working again.
Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.
Hope this has been helpful.
Commander Paul
- Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.
-
Application server cannot log on to the database user PS
Hello
First of all, my setup is:
Microsoft Windows Server 2003
Database Oracle 10 g rel 2.
PeopleTools 8.49
HRMS 9.0
I'm trying to start the application server, but the operation fails with the error message:
PSAPPSRV.5796 (0) [08/27/09 10:29:41] (1) GenMessageBox (0, 0, M): Signon database: invalid user or password database signon ID. (id = PS)
I am able to sign the database with sqlplus and PS user
Here's my configuration settings as indicated on the screen of psadmin:
Characteristic parameters
========== ==========
The servers of pub/Sub 1): n ° 15) DBNAME: [hrdmo]
(Server 2) Quick: No. 16) DBTYPE: [ORACLE]
(Query servers 3): No. 17) user name: [PS]
((4) shock: Yes 18) UserPswd: [PS]
((5) Jolt relay: No. 19) Networkid: [TESTSERV]
((6) WSL: Yes 20) AddToPATH: [C:\oracle\product\10.2.0\database\bin]
(PC 7 debugger): No. 21) ConnectID: [people]
(Event notification 8): Yes 22) ConnectPswd: [peop1e]
(9 servers) MCF: No. 23) server name: [appserver]
(10 assembler) Perf: No. 24) Port of WSL: [7000]
((11) Analytics servers: Yes 25) JSL Port: [9000]
(Bridge 12) areas: No. 26) Port of JRAD: [9100]
Here's the appsrv.log:
PSADMIN.2336 (0) [08/27/09 10:29:29] (0) attempt to Begin priming on domain hrdmo
PSWATCHSRV.5480 (0) [08/27/09 10:29:38] checking process status every 120 seconds
PSWATCHSRV.5480 (0) [08/27/09 10:29:38] Server started
PSAPPSRV.5796 (0) [08/27/09 10:29:40] (0) release of PeopleTools 8.49 (WinX86) from
PSAPPSRV.5796 (0) [08/27/09 10:29:40] (0) used Cache Directory: C:\oracle\product\PT8.49\appserv\hrdmo\CACHE\PSAPPS
RV_2\
PSAPPSRV.5796 (0) [08/27/09 10:29:41] (1) GenMessageBox (0, 0, M): database Signon: ID invalid user or password for parts
to signon. (id = PS)
PSAPPSRV.5796 (0) [10: 29:41] (0) 27/08/09 server could not start
PSWATCHSRV.5480 (0) [08/27/09 10:29:42] closing
PSADMIN.2336 (0) [08/27/09 10:29:48] (0) attempt to end on the hrdmo field boot
As I have said, despite the error message, I can't connect to the database with sqlplus with PS PS user password
Could someone help me please with this problem? Thank you.user10862790 wrote:
It is not an OPRID = "PS" in PSOPRDEFN.If you create a database of HRMS9, you should have this by default. Are you sure that you build a database of DEMO HRMS9? What option did you choose the DMS database setting during the creation of the BDD?
You can copy one another or insert a new row in this table, the PS has obtained special rights.
I would be suspicious of your creation of db and I see how you have done and perhaps restart from scratch, after carefully reading the doc.Nicolas.
-
Unable to log-in to the industrial federal cash account.
Original title:
Industrial Federal Credit Union
Why can't connect me to my account
Hello
Welcome to the Microsoft community!
Thanks for posting your question here.
From the description of your post, I see that you can not connect to your account industrial Federal Fund.
- What happens when you try to log-in to the account of the 'federal credit union industrial? What is the error message?
- You are able to connect using another browser?
If the question is limited to "industrial federal credit union" then you can contact for assistance:
https://www.IFCU.com/contact%20Us.html
I hope that helps!
For any assistance on Windows please keep us informed.
We are here to help.
-
After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.
This happens in safe mode for.
The PC is a Sony Vaio laptop.
Any suggestions,.
John
Hello Orwell,
Thanks for posting your query in Microsoft Community.
You have a Windows 7 installation disc?
As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.
Startup Repair: frequently asked questions
If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
I created an account called a few years ago, but recently when my guest tried to log on it does indicate any found user profile
try to disable the account, by restarting the computer and then re-activation of the account.
-
I'm unable to log on to the account of Windows 7.
Original title: I lost my pass my point of accoyn an i have access on this salvation tell my some on alles it with my accoyn watt I do toy bring her back
I lost my pass my point of accoyn an i have access on this salvation tell my some on alles it with my accoyn watt I do toy bring her back
I lost my pass my point of accoyn an i have access on this salvation tell my some on alles it with my accoyn watt I do toy bring her back
There are a lot of options built into Windows to help you out of this situation:- Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
- Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
- Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
- Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
- Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
- Check your paper files (works only if you threw down the password somewhere)
-
The main administrator password Chang...
"Microsoft's strategy concerning lost or forgotten passwords"
<>http://support.Microsoft.com/kb/189126 >HTH,
JW -
Unable to log on to the Windows Vista-based computer
Original title: bull of password!
I just bought another laptop to a pawn shop! Its an old HP, with Vista.My delimma is the owner of the store for 2 years changed the user to logon pword to "19mainst".Although here, I'm tempted every combo, type of thinking he's playing with me, probably hes just dense! UIs the thing to do yto pull the cmos battery or what? The battery is visible on the right with the RRam! Thank you, Francis HeHaw!
Hi francis,.
You can see the article mentioned on the Microsoft Policy below we lost or forgotten the password.
Microsoft's strategy concerning lost or forgotten passwords
Reference: Keep passwords secure strategy of Microsoft on move passwords
Hope the helps of information.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Server 2008 R2 giving BSOD and I am unable to log into the server
I have Server HCL, that worked great for the past 2 years, all of a sudden it's a started giving some noise so I checked in a RAID and found a missing display the DB, I just google and then I went to the RAID Configuration, then reinsert that disc HARD once more in the same slot, then it started to show me also misconfigured so I fix it configured by the RAID BIOS WEB utility and then they replace missing PD and then make the drive HARD in line now, when I started the server I'm unable to log on to the server, its sends a BSOD and if if I'm not connect its absolutely perfect work... Please help its file server.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
OfficeJet J3680, cannot log on to the appliance
OfficeJet J3680, connected by USB to Mac Mini with OSX 10.9.5.
It worked very well for a long time, but now scanning is broken. Print still works fine. All features (printing and scanning) works fine if I connect the USB cable to my MacBook Pro with the same operating system.
Specifically, I get the error message "unable to log on to the device. This happens for all types of access attempt (preview, Capture of Image, system preferences > printers and Scanners > Scanner > Scanner open...)
I tried different solutions, up to and including a complete uninstall and reinstall, with restarting the computer and the printer.
Update Software Apple (in the App Store) indicates that I have successfully installed HP Printer Software Update Version 3.0.
Printing SYSTEM has been reset several times.
Clues? It's super frustrating that it works on my laptop, but not the desktop computer (where there is meant to be fixed.)
Hi James!
Thanks for getting back to me, and Yes you are right and forgive dominant that the printer works with other devices.
Here are a few suggestions more:
- Remove the first printer driver by following these steps: Sunshyn2005: FRUSTRATED! HP 6700 scanning feature does not not with my MAC
- Complete a manual uninstall then: Sunshyn2005: Re: definition of Scan
- Reinstall the driver v3.0: v3.0 of HP for OS X printer drivers
- If it still does not work, try to create another user account
Hope you enjoy your Monday
-
Unable to connect to the database because the log file is deleted
Greetings,
Recently I cleaned a bit unnecessary files on my PC and did not know that an oracle log file has been deleted. That's why when I try to connect to the database I get the following error:
ORA-01033: ORACLE initialization or shutting
Plu SQL, I try closing and start up the database I know what type of file that has been deleted. So, how can I solve the problem?
Kind regards
Valerie
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 18 11:46:46 2009 Copyright (c) 1982, 2005, Oracle. All rights reserved. SQL> startup ORA-01031: insufficient privileges SQL> connect firefly Enter password: ERROR: ORA-01033: ORACLE initialization or shutdown in progress SQL> connect sys/manager as sysdba Connected. SQL> shutdown immediate; ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup ORACLE instance started. Total System Global Area 146800640 bytes Fixed Size 1286220 bytes Variable Size 92278708 bytes Database Buffers 50331648 bytes Redo Buffers 2904064 bytes Database mounted. ORA-00313: open failed for members of log group 2 of thread 1 ORA-00312: online log 2 thread 1: 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_57J0VR00_.LOG' ORA-27041: unable to open file OSD-04002: unable to open file O/S-Error: (OS 2) The system cannot find the file specified. SQL>
You must enable ARCHIVELOG mode and use the backup provided to make (or calendar) Script backups of a database of the XE.
http://download.Oracle.com/docs/CD/B25329_01/doc/admin.102/b25107/backrest.htm#i1004902
As you have not a
Directory 'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE', you can check to see if the backup was created here!Hemant K Collette
Published by: Hemant K grapple on September 18, 2009 19:00
-
Here's my question after tons of research and test without have the right solutions.
Target:
(1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".
(2) I created physical standby database "stbydb" on the server "node2".
(3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.
(4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)
(5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)
(6) I do RMAN backup (database and archivelog) on the site of relief only.
(7) I want to use this backup for full restore of the database on the primary database.
He is a DR test to simulate the scenario that has lost every primary & Eve total servers.
Here is how to save, on the database pending:
(1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files
(2) RMAN > backup database;
(3) RMAN > backup archivelog all;
I got elements of backup and copied to primary db Server something like:
/Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)
/Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)
/Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)
So here's how to restore, on the main site:
I clean all the files (data files, controlfiles oder all gone).
(1) restore spfile from pfile
RMAN > startup nomount
RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
(2) modify pfile to convert to db primary content. pFile shows below
*.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '
* .audit_trail = "db".
* full = '12.1.0.2.0'
*.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'
* .db_block_size = 8192
* .db_domain = "
*.db_file_name_convert='/testdb/','/testdb /'
* .db_name = "testdb".
* .db_recovery_file_dest ='/ orafra'
* .db_recovery_file_dest_size = 10737418240
* .db_unique_name = "testdb".
*.diagnostic_dest='/opt/Oracle/DB '
* .fal_server = "stbydb".
* .log_archive_config = 'dg_config = (testdb, stbydb)'
* .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"
* .log_archive_dest_state_2 = 'ENABLE '.
*.log_file_name_convert='/testdb/','/testdb /'
* .memory_target = 1800 m
* .open_cursors = 300
* runoff = 300
* .remote_login_passwordfile = "EXCLUSIVE."
* .standby_file_management = "AUTO".
* .undo_tablespace = "UNDOTBS1.
(3) restart db with updated file pfile
SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'
SQLPLUS > the judgment
SQLPLUS > startup nomount
(4) restore controlfile
RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';
RMAN > change the editing of the database
(5) all elements of backup catalog
RMAN > catalog starts by ' / home/oracle/backupset / '.
(6) restore and recover the database
RMAN > restore database;
RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)
(7) open resetlogs
RMAN > alter database open resetlogs;
Everything seems perfect, except one of the file log roll forward pending is not generated
SQL > select * from v$ standby_log;
ERROR:
ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
Additional information: 3
no selected line
I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.
So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.
And I got the same missing log file.
The problem is:
(1) complete alert.log filled with this error, not the concern here
(2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."
(3) I can't delete and re-create this log file
Then I tried several and found:
The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.
For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 19 ACTIVE 133632
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
So until I take the backup, I tried on the primary database:
SQL > alter system set log_archive_dest_state_2 = delay;
This was the Group of standby_log side Eve #4 was released:
SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;
GROUP # SEQUENCE # USED STATUS
---------- ---------- ---------- ----------
4 0 0 UNASSIGNED
5 0 0 UNASSIGNED
6 0 0 not ASSIGNED
7 0 0 UNASSIGNED
Then, the backup has been restored correctly without missing standby logfile.
However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.
Finally, my real questions come:
(1) what I do may not do on parameter change?
(2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?
I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...
And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.
I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.
Your idea is very much appreciated.
Thank you!
Hello
1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.
2nd--> when we opened the ORL database should be deleted and created
3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.
DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;
THREAD # SEQUENCE # GROUP # STATUS
---------- ---------- ---------- ----------
1 233 4 ACTIVE
1 238 5 ACTIVE
DR sys@cdb01 SQL > select * from v$ logfile;
GROUP # STATUS TYPE MEMBER IS_ CON_ID
---------- ------- ------- ------------------------------ --- ----------
3 /u03/cdb01/cdb01/redo03.log no. 0 online
/U03/cdb01/cdb01/redo02.log no. 0 2 online
1 /u03/cdb01/cdb01/redo01.log no. 0 online
4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0
/U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0
DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log
method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory
DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log
-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log
DR sys@cdb01 SQL > alter database force claire logfile 4;
change the database group claire logfile 4
*
ERROR on line 1:
ORA-01156: recovery or current flashback may need access to files
DR sys@cdb01 SQL > alter database recover managed standby database cancel;
Database altered.
DR sys@cdb01 SQL > change the database group claire logfile 4;
Database altered.
DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log
-rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log
DR sys@cdb01 SQL >
If you do, you can recreate the controlfile without waiting for redo log entry...
If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".
Thank you
-
RC-40201: unable to connect to the database
Hi Experts,
While running 'perl adcfgclone.pl appsTier' I get below error.
[applmgr@tfnvlskp01 bin] $ perl adcfgclone.pl appsTier
Enter the password [APPS] APPS:
....
....
Enter the number of the port pool [0-99]:
70
Audit of the pool of port 70
fact: Port pool 70 is free
Information available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst complete port
Checking the connection to the base...
RC-40201: unable to connect to the TEST database.
Enter the listener of the port database [1531]: 1526
RC-40201: unable to connect to the TEST database.
Could not establish connection to database on Port 1526.
Please verify that the database is running.
Make sure that the Port DB corresponds to that used on the dbTier.
ERROR: creation of context not completed successfully.
Please check for errors in the /tmp/adcfgclone_28867.err file
But when I check the listener and the DB to db node status, everything is running.
STATUS of the LISTENER
------------------------
Alias TEST
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start date October 14, 2013 06:33:49
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /app/orabin/testdb/11.2.0/network/admin/TEST_tfnslskp01/listener.ora file
The listener log file /app/orabin/testdb/11.2.0/log/diag/tnslsnr/tfnslskp01/test/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROCTEST)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=tfnslskp01.d1.peapod.com) (PORT = 1526)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service 'TEST' has 1 instance (s).
Instance of 'TEST', status UNKNOWN, has 1 operation for this service...
The command completed successfully
SQL > select instance_name, status from v$ instance;
STATUS INSTANCE_NAME
---------------- ------------
OPEN TEST
Outputs information complete port available at /app/oracle/testappl/admin/out/TEST_tfnvlskp01/portpool.lst
List of allocated ports based on port 70 pool *.
Web listening port: 8070
Database port: 1591
RPC port: 1696
Reports port: 7070
OPROC Manager of Port: 8170
Web PLSQL Port: 8270
Port of servlet: 8870
Listening port of forms: 9070
Data port for the server Metrics: 9170
Req server settings. Port: 9270
JTF Fulfillment Server Port: 9370
Map Viewer Servlet Port: 9870
Utility Web OEM port: 10070
VisiBroker OrbServer Agent Port: 10170
ACEM Server Port: 10620-10625
ACEM Telnet Port: 10620,10622,10624
ACEM Port Dispatcher: 10580-10583
Range of ports OACORE Servlet: 16700-16709
Port range of discoverer Servlet: 17700-17709
Port range of forms Servlet: 18700-18709
Port TCF: 15070
Range of ports XMLSVCS Servlet: 19700-19709
Port of Java object Cache: 12415
iMeeting Collaboration Server Port: 9570
iMeeting the registration Server Port: 9670
iMeeting iMon port Monitor Port: 9770
Please let me know if the value portpool.lst to the Port of database should be 1526
Or
Miss me a few concepts here and I have to choose another port instead of the 70 pool value.
OS - RHEL 5.4 version (64-bit)
Version of DB - 11.2.0.3
Version of the EBS - 11.5.10.2
-Thank you
Hello
This is what has been done on my previous post on the basin of the port and the listening port you are trying to connect, as above, that you use 70 portpool was offset... This is what did not create a connection on port 1526 (which means chicken port 5)
anyway nice to hear that the problem is now resolved
Please mark the thread as answered and close it.
Thank you &
Best regards
Maybe you are looking for
-
Adware: Win32/opencandy
Microsoft's analysis said: I find RHIs malware and it also know, it is partially removed. What can I do to remove it entirely? Thank you to
-
In case I forgot my admin password I can break it by logging in via the hidden administrator account. If as if I put the password for both my account admin and admin account hidden and then I forget them both, how can I break hidden admin account or
-
What pop3/smtp use in outlook express 6 with an msn e-mail account?
I went to tools in oe6 and cannot send/receive as path names, I put in that are not valid. I was not able to locate the correct paths
-
I canoe play my 3d on my screensaver. It does not compadible
-
could someone help me... Please! the documents do not print. I cleaned up; harmonized and ink cartridges with ink. Impressions of black color in the doc does not print.