Unable to play media, source and program windows empty

Similar Questions

• First Pro CC 20141 - end of media indicators different source and program monitors?

  Here are two dumpsters of screen showing the straight edges of the source and program monitors in 20141 PPCC. No one knows why the end of the indicators of the media are so different? Left is source monitor, the right is the program monitor.

  

  Those who are in fact different indicators. The left one is the end of the indicator of media, which lets you know that there are no more frames in the source element. The right is known as the end of the indicator of the sequence, which can also get to in the Source monitor if you play a clip at the end and then click the right arrow.

  The two indicators are controlled by the same option in the dialog box settings Overlay: indicators of the end of the Media/sequence.

• CD/DVD player will not play media error no program associated with this file.

  OT: cds play do not
  Hi guys, my cd/dvd drive on board won't play media, says no program associated with this file. I checked the driver is up to date, have run windows test and player is fine, don't, then reinstalled my Media Player program, have cd player connected to them, any suggestions please accepted with gratitude. Cheers. shadow

  Hello

  1. the problem occurs with any particular media or all media?
  2. don't you make changes to the computer before the show?
  3. What is the accurate and complete error message you get?

  I suggest you try the steps from the following link:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• No visible video in the source or program windows - first Pro CC 2014 8.2.0

  I've just updated for first Pro CC 2014 version 8.2.0, and now no matter what I try, no video is visible in the source or program window.  I used 8.0.0 with no problems (at least not this one), but was forced to update to open the calendar of a customer.  I was having exactly the same problem with the update 8.1 a few months ago and has been forced to downgrade to 8.0.0 to see my video.

  It doesn't matter what is the codec, or if it is an image file, bars and tone or a title rendered in first.  Nothing.  If I play or rub I hear audio, video, not at all.

  It really blows that a project saved to 8.2 will not be open to 8.0.  They are the two Premiere Pro CC 2014.

  Looks like it has something to do with my video card, because when I resize the Windows I'm presented with a bunch of flight of the vertical blue lines.

  I'm on a 2012 bicoeur Mac Pro with OS 10.9.5, ATI Radeon HD 5870 video card stock.

  I looked first preferences to see if there is some kind of active Accelerator GPU or something, but I don't see anything like that.  Anywhere else that I can look at?

  It is a big problem.  I pay $50 / month for this?

  Shawn Marshall

  Marshall Arts Motion Graphics

  Okay, I found the problem.  My project settings had failed in the Mercury Playback Engine acceleration GPU (Open CL).  I guess that ATI Radeon HD 5870 1024 MB card is not compatible with this, so go to the option of read only software resolved the problem.

  Phew.

  Shawn Marshall

• Composite video is not showing is not on the Source and program monitors

  Update Premiere Pro CC 2014 to v8.1 on my Mac Pro running OS X 10.9.5

  When the conversion and loading of a project that worked very well in the last version of first Pro CC 2014, the source and program monitors refuse to display video.  Why? It's terribly frustrating!

  Information on Mac:

  Mac Pro - 2 x 2.4 Quad-Core

  24 GB RAM

  2 x ATI Radeon HD 5770

  Mark thank you for answering my question.

  I ended up having to create a new project, select the the CPU processing, the old CPU project and Recheck in my preferences to import.  Unfortunately this update cost me 2 hours of time to fix as well for me and my client. Not impressed.

• Windows Media Player unable to play media files

  License migration

  I recently got a virus in my system, I had to have my computer cleaned up so I could get back to using my computer. In any case, in my library of music 11 windows media I get 'You need a license to play this content' and blah, blah, blah. And then they start talking about license migration, and they tell me that I have to download a new license, but when I try to get this 'NEW' license it is some type of "screw up / error" and I can not play my content without going through rubbish even every time without any result of corrective.
  Help!

  I recently got a virus in my system, I had to have my computer cleaned up so I could get back to using my computer. In any case, in my library of music 11 windows media I get 'You need a license to play this content' and blah, blah, blah. And then they start talking about license migration, and they tell me that I have to download a new license, but when I try to get this 'NEW' license it is some type of "screw up / error" and I can not play my content without going through rubbish even every time without any result of corrective.
  Help!

  ===============================
  What is the error message?

  The following items may be worth a visit:

  (925705) when you try to use Windows Media Player 11

  play a digital rights management (DRM) - protected

  Multimedia, media cannot play

  http://support.Microsoft.com/default.aspx/KB/925705

  (this article specifies that the issue you're dealing with)
  can be caused by reinstalling Windows)

  Windows Vista-

  Privacy statement for Windows Media Player 11
  http://www.Microsoft.com/windows/windowsmedia/player/windowsvista/privacy.aspx

  Good luck...

  John Inzer - MS - MVP - digital media experience

• Source and program monitors crashing in the first

  Hey all.

  So, unfortunately I seem to have problems of stability with Adobe Premiere CC 2015 (to date).

  The source files are H.264 in a .mov container.

  I am running Windows 10 but have experienced the same problem yesterday in Windows 7.

  I use the EMT.

  So here's the deal. I was running really slow and repeated performance crashing (just the program monitor and source and also of the whole program). I was pulling my hair out with frustration and decided to pull the trigger on a new computer. (Yes, I know... the upgrade to solve problems of crash was probably not the best idea, especially without the problem of the first widely).

  My old computer:

  Windows 7

  AMD Athlon II X 4 630 @ 2.8 ghz

  12 GB OF RAM

  NVIDIA GTX 460 768 GB

  New computer:

  Windows 10

  Intel i7 4790 @ 3.6 ghz

  24 GB RAM

  NVIDIA GT 720 1 GB (the OEM mobo dislikes my GTX 460 [known issue] and I plan to get a GTX 960 or GTX 970 tomorrow)

  I've been editing, completely blown away by how smooth first and After Effects were running; a pleasure to scrub through the timeline in PP and time real AE RAM previews. Then, just before you go home at night, the program and the source monitor crashed.

  On my old computer, it meant that they became black. On the new computer they're going grey (sometimes the source monitor panel displays "media forward"). On both computers, the playhead moves and audio isn't yet.

  I do not regret my upgrade, I know that it was overdue. However, it is a bit disheartening that I expected the upgrade of instability to do a thing of the past (I do not claim that it was smart thinking lol).

  Any input would be greatly appreciated.

  PS. After the program monitor and the source of watching the crash, the program does not freeze. I tried switching back and forth between Composite and Mulitcam (in the program monitor) or Composite and Audio Waveform (in the Source monitor Panel) to try to jog it in work and that does not work. On the old computer, when I was finally closed PP to relaunch a dialogue accident would seem, but not up to what I chose to close the program to reboot (little strange, right?). On the new computer, the only time where he arrived so far (less than 90 minutes to play in the first), it didn't pop up with a dialog to crash, it just closed as usual. I don't remember if the dialog crash on the old computer had an error code.

  Change the name of mov to mpeg extension and see if it will help.

  I'm not upgrading to W10 and have no problem with the nikon files and cc15. I'm a little skeptical W10.

• New user problem: Source and program monitors not identical

  Hello

  After several years of inactivity edition I want to make a new start – now with a new version of Adobe. Seems I have to do a large part of the new curve... ;-)

  Implementation of a simple test/learning project, I immediately met a strange problem:

  My Source monitor and program monitor have another 'form': the Source monitor is a block (4:3?), the program monitor is a big screen.

  I'm not aware of having modified or arranged these parameters, and I can't do them even.

  How to do this?

  The questions and related issues:

  • I looked up the initial project settings that allow me the selection of options PAL (and not NTSC), but also big screen by default (and not a different screen format). I can't find. How to do this?
  • Commenting on these parameters of the project, I'm not sure 100% what to choose if I still have the choice: I think that older movies (to change) have my trip so the most recent or 4:3 screen 16:9 wide. And after a crash of my Canon camcorder is on the way which also records (I think) on the big screen. So: Select a specific screen/project format? And WHAT should I choose?
  • The different shape of the Source and the program monitor seems to affect the use of the Titler window: also has a form 'bulk '. Thus the titles in the Titler different completely in the program monitor, especially in what concerns eligible margins. This also gives the creation of models of Titler very confusing and difficult.

  Thanks for the help!

  WimYogya

  Hi Wim,

  The Source monitor and program have qualities of different reading. For example.

  Source monitor will play the original clip. So, if you have a 4:3 video, it will play as it is.

  The program monitor will play within the parameters of the sequence you have chosen. Thus, in the case of sequence > sequence he settled on square pixel 1.0 and the clip is 4:3 it will play in a square pixel.

  Visit this link for more information: Web video wrong size / enlarged

  Vinay

• My Source and program monitor stopped working: Premiere Pro 2014

  Here's how it all started.

  I got an error that says I didn't have the correct video modules, then came the ugly face of BSOD. I rebooted, tried again, same result. I did a system restore with Windows, reinstalled Windows 8.1, reinstalled all my plugins and programs Adobe CC, and when I opened my project has been completely blurred. Uninstalled all Adobe software, ran CC Cleaner, reinstalled. This audio in my videos work, but now there is only a white screen on my my Source monitor and program when I try to play my calendar. I did a restore of the system under Windows, went on my site of manufacturers of laptop and updated computer to update my bios, the graphics driver and processor. Also reinstalled windows updates and my Adobe software, I tried CC Cleaner before each installation, tried to return to the previous version of first and still nothing in my source or program monitor.

  MSI GE70

  Processor Intel Core i7 4700MQ

  NVidia GeForce GTX 765M / 2GB GDDE5

  12 GB memory

  for help. Images of a Canon C100 MTS

  Premiere Pro 2014.2

  Things I've tried other threads:

  -J' read it could be a problem with the. So I also tried to start a new project with the MTS files. MOV files and h.264 and still nothing.

  -J' tried to go to the project settings and choose "make with the software", still nothing.

  -J' tried to clear the cache of the multimedia files under C: / / users / my user/app data/roaming/Adobe/common...you guessed, NOTHING.

  -J' tried to use my daughters 'Frozen' magic wand, we bought for Christmas solve the freezing problem with magic as Elsa has done in the film... surprisingly, still nothing.

  Any other ideas out there?

  Hello

  You have two graphics cards? You can check that in Device Manager > display adapters.

  If so, disable Intel Graphics and see if it helps.

  Have you tried to trash the preferences?

  Rename the 8.0 for trash folder preferences: \Users\\AppData\Roaming\Adobe\Adobe Premiere Pro\

  Thank you

  Regalo

• Difference in size between wall Source and program?

  I'm new at first and started using it because I love how sturdy it is great. When I drag a clip in a Source (Group?) monitor, the video preview is a different size if I slide the same clip in the program monitor. When I try export the clip, it exports to the same size as the program preview screen which has a large black borders even if the original for this clip has no borders. I would like the project to export more closely to the size of the preview of the Source monitor. When I'm in the area of export settings, click the option use the same parameters as the source file, but it still has black borders.

  I assume this has something to do with reports l / h? But then I don't know why something would have black borders if I choose to use the settings from the original source. I'm not really difficult to get rations of exact great aspect at the moment, I'm just curious to know what the difference is between dragging a clip in the source monitor and program monitor. This is the same exact clip that I am dragging in both. Because now I understand how the slightly larger clip in the program monitor by allowing eligible and right margins by expanding the video preview, that she grows in the exporting region and does not cause any reduction in video quality. Only complaint is that I have to play with the eligible margins on all the separate clips that come with different files to make them fit into one video.

  All this makes sense? Is there a setting somewhere that will import a file to have the same dimensions, when I try and then export it?

  In short:

  Import a file. When I drag him in the Panel of the sequence, the previews show with black borders when the original video clip did not. How can I have that happen?

  Many thanks (assuming that I have provided information to evacuate to produce a clear answer)

  When you create a new project you are presented

  with a setting of the sequence to the choice menu.

  You can skip this step by pressing "Cancel", then import your media

  and create the type of sequence that best adapts to your images.

  Try this:

  

  And to better understand what is happening, look at this:

  How to choose the right sequence settings?

• Document from Windows Media Player AND MS Windows open on the same screen

  Hello.

  I'm doing a very long media (recorded voice) transcript of court recorded on Windows Media Player in a document typed on MS Word (using Windows XP).

  I would like to know if it is possible to have Windows Media Player and my document strikes MS Word open on the SAME screen.  I am currently switch between two programs using my bottom toolbar.  It is extremely time consuming and not very well.  Ideally, I would like to open my Windows Media Player, in a small screen on the right upper side of my MS Word document.  This would allow me to work out of the same screen without having to click will result in my bottom toolbar to switch between these programs.  I'm sure that I explained properly :-).  ANY help, suggestions and advice will be highly appreciated.

  Kind regards

  AJS

  You should be able to do it by opening the two programs, then right click on the taskbar and selecting "Tile Windows vertically".  Just make sure that they are only two open programs.

  This screenshot shows WMP and WordPad, because I do not have Word installed, but it should work exactly the same thing:

  

• Source and output windows display the content horizontally cut - that makes it much too

  Hi everyone - I use both the CC2014 and the old versions CC of the Media Encoder to convert WMVs for use in Captivate 5.5. The software has been installed on a new machine, so initially when I did drag an item in the queue (in two versions), Windows Source and output would show only black and would make black only.

  Later, I discovered that Quicktime must be installed I did (for Windows 7).

  Now the two encoders show the cut content to half way down in the Source and the release of windows. content reproduced and when it is encoded (as a flv in CC for example), it displays remove off as well.

  The basic video settings are set to Match Source is not a question of culture. I have two monitors and have seen oddities when questions arise on different monitors - the graphics card is a NVidia Quadro K2100M.

  Any Format choose to exit, the result is the same. The software knows the correct proportions of the source video, only half superior is cut off - that is black.

  Is this something experienced by someone else?

  Thank you

  Frank

  Yes confirmed the answer given by marisela2013 in the link more than half of the video is missing (black screen) - Help! regarding the removal of said KB Microsoft update fixes the problem.

  It solves the problem under a new laptop of Dell Win 7 with CC2014 and CC installed with this update removed.

  Thank you

  Frank

• Source and program monitor blank

  After you have installed the trial version of Premiere Pro I tried to do a quick video test using a MP4 file on my computer. I was able to successfully import this file in first but I can't see this video in the Source monitor and program monitor (after adding a sequence). I tried to re - encode files to AVI and WMV formats but neither of those two is worked. I also tried to put right in JPG and PNG images and have be in vain in the these views as well. However, I was able to export a still image using the monitors. So far, after about 3 hours of Googling the only possible answer to this question, that I could find is that first requires 2 separate drives at work; However this seems inaccurate that the program has made no attempt to warn me, or even check to see if the computer on which I use 2 disks hard during install and launch, or remember you saw in the minimum standards on the Adobe Web site. Does anyone have an idea what can really cause the problem? I'm more than happy to preview quality lower, as long as I can see what I'm doing before in a higher quality rendering.

  Need someone to help... more information please click below and provide the requested information

  -Organization of information FAQ http://forums.adobe.com/message/4200840

  What is your exact make and model graphics card (ATI or nVidia or?)

  What is your exact graphic adapter driver version?

  Did you go to the vendor's web site to search for a newer driver?

  For Windows, do NOT rely on Windows Update to have information about the current drivers

  -You must go directly to the vendor's web site and check the updates by yourself

  Autodetect Driver ATI http://support.amd.com/en-us/download/auto-detect-tool

  nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

• Unable to play some Facebook games on Windows RT.

  Original title: facebook games

  I play Facebook games that require Flash Player - it won't charge and says that it is integrated with the Surface RT.  How can I solve this problem

  See this:

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_rt/unable-to-play-Facebook-games/73ab6602-b3f4-44f7-9403-f5b61edc500f?msgId=d0365787-5a6b-4396-9e05-bc9905aa1f05

• Infected by a virus and programs are empty

  I think we've got a virus. Of course, I can get on the internet, but in a weird way. My office is empty and "all programs" says "empty."  I need to try the system restore, but cannot access it. I've tried everything. I don't know that much about computers, but I'm trying to avoid taking it to be fixed.

  Try to run the restore of the system at the command prompt:

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  It looks like your icons are hidden.  Change your settings to show hidden files:
  Panel-> folder-> View (tab) Options
  Check the box "show the hidden files and folders".
  Uncheck "Hide protected operating system files"
  OK your way out.

  If you find that your files are hidden, and then right click on them-> properties-> uncheck "hidden". -> OK

  HTH,
  JW