Unable to save my Satellite L300 - repeat me date has passed

Similar Questions

• New Satellite L300-IBV - Windows installation has not been completed.

  Computer Satellite L300-IBV brand new.
  When it is lit (for the first time) the screen informed me that there were a little closed and the windows installation was not completed.

  It asks me to click ok, and then restart the installation.
  When I click ok, the screen darkens and then reappear with the same message.

  Help, please!

  Hello

  try to start your laptop with F8 and choose the first option. To fix my computer. When Vista system recovery options are shown, please choose the last option in recovery Toshiba. Run it and follow the menu on the screen.

  I hope that you will be able to install Vista using the Toshiba recovery image.

  Please post the result.

• Unable to save my Satellite L650 - 1 Q 3

  Hello

  could you please help me, I can't save my laptop. If I try to do, he says its too late to register and he also told to fax my proof of purchase but I can't fax, I can't e-mail a scan?

  Hey,.

  Simply contact the Toshiba hotline in your country and explain your problem. I m sure they can help you to save your laptop and can give you an e-mail address.

• Satellite L300 - ODD has exclamation mark in Device Manager

  Please could someone help me with my Satellite L300 laptop?
  It has a pre-installed Pioneer DVD - RW drive, but in Device Manager it has exclamation mark and not show as a CD player and DVD player.

  I tried for days to find the right drivers but no success, it displays as: PIONEER DVD - RW DVRKD08A ATA Device in Device Manager, I am unable to watch DVD s, thank you.

  Remove the device from the list and restart your laptop.
  The problem again?

  What operating system do you use?
  You use your laptop to factory settings?

• Satellite L300-01:00 - need the drivers Windows XP 64-bit

  Hi all!

  I recently bought the Toshiba Satellite L300-01:00 which has 4 GB of memory RAM. The thing is, 32-bit Windows cannot allocate more than 3 GB of RAM and there is no drivers for Windows 64 bit on this site.

  Can I use these drivers XP, downloaded from the site, as well on XP64 and XP32? If this is not the case, what am I, what to do?
  Thank you very much!

  Are you bother just did 3.2 GB can be used or you think really with 4 GB, you'll have more powerful laptop?

  There is no sense to think about installing 64-bit if the phone is not supported for 64 - bit. Maybe you can find some drivers on the internet, but you will have all the other stuff specific to Toshiba.

• Satellite L300-1BV - how to connect to the TV?

  Hello
  Should what cable I plug the Satellite L300-1BV to my TV?

  Thanks for the answers in advance

  Hello

  What video ports you have on your Satellite L300 of output?

  I have the Satellite L300 too but he has only normal VGA output. This means that I m using a cable RCA VGA adapter to connect it to my TV. After that I connected the cable that I turn on the TV and then the laptop. On the laptop, you can switch between monitors now with FN + F5.

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• Satellite L300 - how to save on the E: drive?

  Hello

  My sister seems to have problems with his hard drive, he said that it is almost full (vista drive (c :))) a message keeps coming up)
  I was wondering just how she can start using the E: drive. Is it possible to change the settings on the computer so that everything is saved on disk E
  I don't know much about computers but would really help

  It is Toshiba Satellite L300 and Windows Vista 32 bit

  Thanks maz

  Hey Buddy,

  You can use drive E all the time... ;-)

  The point is that most programs will be installed on the C drive, so you should choose drive E, if you want to install.

  In my opinion the best option is if you save all important files and private on second drive E. I mean these files like photos, videos, music, documents, etc. He just copy and post it on the E drive, everything that s! :)

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• Unable to connect to the Internet my Satellite L300-1 to 6

  Hello

  I have a problem with my Satellite L300-1 to 6. When I try to connect to the internet I plugged taking LAN my slot for LAN card and when the identification process of the network in "Network and sharing Center" to the State of the connection write "Unindeficated Network" and I cannot access the internet...
  And this is happen when I use automatic receives the IP parameters... ?

  When I try to solve this problem with the manual configuration TCP/IP settings in the status bar indicates that I have an internet connection but when I try to open the WEB site I see the error message «...» CAN NOT COMMUNICATE WITH THE SYSTEM (DNS).

  Please explain to me how to fix this...?

  P. S. The network on my other PC works normally... ? On my L300, I use Windows Vista Home Premium SP2 and on my other PC, I use Windows XP Pro... ? !

  Hello

  Usually, the WLan router supports a range of IP addresses and everything should be set to automatic.

  In my opinion, you should first check the settings of the WLan router.
  Take the router manufacturer news and read the manual of the router how to set up the router.

  After the router has been configured correctly, you should go to connections-> LAN (local network connection) and need to access the properties of the TCP/IP protocol.

  Here, you must make sure that the IP address and DNS are set to obtain an address automatically

  That's the whole secret.

• Re: Satellite L300-19 - unable to use power management

  Hello everyone.
  I installed win 7 (Version 6.1.7600) 32 Bit and everything works fine on my Satellite L300 19 f.
  Used to work as flash cards. But after I went to the control panel > power options > require a password on wake up and modified to do not require a password I couln t change more power management. When I press FN + F2 I see only the map but it shows no power management.

  I installed the final version on the toshiba site 2.00.18: http://support1.toshiba-tro.de/tedd-files2/0/fcsu-20091110131357.zip
  Here\s a link to a screenshot (imageshack):
  http://yfrog.com/5ftesthjip

  I'm intrigued, because he used to work after installation.
  Any ideeas?
  Thank you

  Hello

  Have you tried to reinstall Toshiba Value added Package?

  Normally, it should be possible to change the power plan if you have installed the Toshiba tools properly.
  Check it!

• Re: Satellite L300-1AS - unable to connect via a WLAN

  Anyone, please help.

  My L300-1AS connects not wireless.

  The switch on the front is on and to the left, the F8 function key turns on the light and offshore, but even with it on, when I try to connect to a network it tells me that it cannot find. The diagnosis tells me to make sure that the wireless feature that it is. I'm sitting on top of the router and using another PC for this type so that the signal is there.

  I looked in Device Manager and in adapters network and when I do properties on the Intel(r) wireless WiFi link 5100 he says its working properly. The 'Update Driver' button tells me his up-to-date.

  It's as much as I think I'm able to check.

  Any help please.

  Hello

  I have a Satellite L300 too but it s a L300-10 q, but it should be very similar to yours
  In any case, the hardware switch on the front of the laptop must be on the right side. On my laptop on the right side is marked with and the left side with judgment.
  Check again!
  If you are not sure, take a look in the user manual.

  In addition you can enable/disable WLAN with FN + F8.

  If it doesn't work you should try to update the WLAN driver on your laptop. See the Toshiba WLAN portal for a newer version:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Re: Satellite L300-1DN - unable to connect to the internet

  Hello guys! I recently bought a Toshiba laptop - Satellite L300-1DN and I can't connect to the internet wirelessly or by cable.

  I tried to turn on the wireless button and my laptop recognized my network without wire from my house, but he just not able to connect. Then I tried to connect the cable, but my laptop itself connected to an 'unidentified network' and the internet still does not not :(

  The internet works perfectly fine for my old laptop and my other roommates. So I guess that is not a problem with my router itself.

  I don't know computers very well, so I'd really appreciate your professional opinion!

  Thank you very much!
  Scarfy

  > One last thing, I tried to connect to an unsecured wireless network and it worked!

  It looks like a problem with your router. Check this box and look on the site of the factory for an updated firmware.

  Make sure the laptop and the router using the same standard WiFi (for example 802.11 g).
  Disable all the functions of economy of the WLAN card in Device Manager.

  Last but not least follow Luke posted.

• Satellite L300 - 22L: Power saver issue code: 0x7E runnig Win XP

  Guys, I will aprecciate if someone can help me here.

  When I start the computer, this message appears "unable to locate component tpsmain.exe. This application has failed to start because cpuperf.dll is not found. Reinstaling the application may fix this problem. »

  Then I tried to uninstall Toshiba power saver, but it won't uninstall. Error coming out "a fatal error has occurred. This program may be terminated code: 0x7E.

  I'll need help to uninstall and then reinstall energy saver.
  The operating system is Windows XP Professional 2002.

  Thank you very much in advance

  Hi mate

  Just a question;
  Common Modules installed?
  You should do this!

  But before install you common Modules and energy savings you must first uninstall the energy saver!
  If this is not possible in the control panel-> software, then install a CCLeaner and this tool would be to clean the registry and operating system.

  Welcome them