Unable to share the drive C on the same machine Win7 (can on others)... OS refuses to accept the option "share the folder.

Similar Questions

• SyncToy 2.1 has stopped working, with the message "unable to create the folder pair. Unable to create the provider. Can I get help to fix it please

  After the last automatic update, I tried to back up my files (did this every week for at least one year). Message "unable to create the folder pair. Unable to create the provider"came. I tried again, same. The pair and tried to reset upward. Same message... anyone have an idea how to fix?

  Hi Steve,.

  The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Hope this information helps.

• Unable to synchronize the folder "sent" on the new installation of IMAP (resolved)

  Installed Thunderbird, configure an IMAP account. Only Inbox and trash have been posted in the narrow pane on the left.

  I searched the community and assistance, I have not found a solution.

  I solved the problem by sending a message to another one of my email accounts.
  The "sent" folder appeared as if by magic, with all messages sent from the server.

  Just thought this might help someone else.

  Number of files, sending sending junk Inbox etc. do not appear until they are used

• Unable to create the folder inside the Windows libraries?

  I use Windows 7 Home Premium operating system and I have problems of organization of the files with their library system.

  If you need a good laugh, read the help files. For example, any question about this Windows Help topic will take you to "libraries: frequently asked questions.

  It would be great, but each sub-heading usually gives you a single sentence that directs you to an another subtopic instead to provide a clear answer to your simple question. He sends you actually in a circle without never specifically respond to your request.  At first, I tried to create a library in a new folder to store a group of related files. After several failed attempts, I then tried to create a new folder in the document library for storing 2014 tax forms and related information.   However, now my system not even allow me to create a new folder. Reference material provided that clearly sets out the procedures to accomplish this simple task will be appreciated. Thank you in advance.

  Hello

  Please see:

  http://www.howtogeek.com/HOWTO/10283/understanding-the-libraries-feature-in-Windows-7/

  http://www.SevenForums.com/tutorials/583-new-library-create.html

  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  See you soon,.

  J

• Firefox cannot load site on the same machine, but can be downloaded on the same version again

  I have Firefox 3.6.13 on two Windows XP computers. I have a monitor of TED 5000 that has an internal Web site, you can get by (http://geracjgosolar.dyndns.org:1095) and it displays well on one machine but I get a white gray Panel (default background) on the other machine. IE can display fine on both.

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

• How can I control what "drive and the folder" what creative cloud of loading

  MY boot of the SDS drive is analyzed very tight, I need to load the creative cloud and the MANY applications of my plan to load in and work from my F: drive.

  Thank you. I can't locate any advanced or just load options.

  Alan

  The Solution was in the CC settings > preference > applications tab > files tab

  The cloud control creative program location

  CC App - file locations

  > Open creative cloud App (Image below)

  

  > Right click on it (gear, drop-down) (Image below)

  

  > Select and click on 'Preferences' (Image below)

  Applications TAB >-install Locatotion (F:\Programs)

  The files tab >-location of the folder (F:\)

  

  There you GO! (Image below)

  

  Useful links of video

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html#download and install applications

  Download, installation, setting up

  How to properly set up the SSD as boot drive and the HARD disk as disk storage - YouTube

• Cannot open the folder of IMAGES on SONY NWZ - E383 Walkman using Windows Explorer.

  I loaded several songs, videos and photos on the Walkman NWZ-E383.

  The PICTURES folder has become inaccessible to Windows Explorer (cannot open to add or remove photos).

  Any ideas?

  Joffrey:

  I tried your suggestion, but I am still unable to access the folder IMAGES using Windows Explorer.

  The progress bar green in Windows Explorer at the top never quite reaches the right side.

  MUSIC and VIDEO files work fine.

  I even tried pressing the RESET button at the back of the Walkman, without success.

  What other ideas can you suggest?

  Thank you.

  Clay

• How to restore the permissions for the folder

  I work with Windows 7 and Internet Explorer 10.

  Initially I tried see my Cookies folder and eventually he finds in C:\Users\(my user name).  I wanted to look at the files and potentially manually remove some, but I was not allowed access to the folder.  I am the sole owner and the user of that PC.  I figured it would give me full permission for files and folders.

  I tried to change the permissions on the folder, and even if the properties show that I have all permissions except "Special permissions" I was unable to open the folder.

  A second possibility, I changed the permissions 'All' allow all these same permissions - I clicked on full control.  A warning window appears saying that there are permissions that were more in agreement and it is potentially unstable.  I then decided to cancel this change all the permissions back, but am currently not able to restore the original permissions.  I am really unable to change all permissions to this folder now.

  I would like to restore the permissions on this folder Cookies in their original condition / by default.  Can someone help me?

  ALSO: since my original post, I noticed that in the icon beside my C:\username\ subdirectory when you view it in Solution Explorer, there is a lock.  I don't know if it was there before.  Is this a normal representation / by default to the directory?

  Thank you.

  Hi Susan,.

  Please follow the steps suggested by Amrita in http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-to-reset-all-user-permissions-to-default/9da312d2-c99b-4283-a275-e74d93dcc366

  Note: The steps mentioned in the link above involve changes to the registry. So it would be nice if you could take a backup of the registry before you start the troubleshooting step.

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  If the problem persists, try the steps suggested by Brent in http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/restore-default-permission-settings-in-vista/7eacb966-cbbd-41ac-b08d-7c7f881943be

  Note: The steps in the above links works for Windows 7 and Windows Vista.

  For more information about the symbol of lock on certain issues, please go through the response of Steven S't-want-any-locks/f82a3e5e-5164-4dc2-9ec5-3e97ce7606d9 http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-have-lock-symbol-don

  Hope this information helps. If you have any questions, please let us know.

• 2 versions of JDeveloper Diff on the same machine

  Hello
  
  I have 11.1.2.3.0 on my machine. I need to also install the lower version 11.1.1.6.0 on the same machine. Can do us? Or will there be any conflict in the system folder?
  
  Thank you
  Kiran

  911681 wrote:
  Hello

  I have 11.1.2.3.0 on my machine. I need to also install the lower version 11.1.1.6.0 on the same machine. Can do us? Or will there be any conflict in the system folder?

  Thank you
  Kiran

  I have 2 jdev on my machine.
  It creates two files of system.x.x.x - that's it - no conflict.

• Satellite 1800-354 is unable to load the driver when it is turned off during the night

  Hi could sombodu help me to solve this problem.

  My laptop wives is unable to load the driver when its been delivered overnight. It's normal runs when the drivers installed and when it was turned off for about a half hour.
  The laptop has windows xp sp2, the card is a belkin f5d7010 802.11 g and I downloaded the latest drivers for it. Thank you louis.

  Hello

  This driver is the problem for the PCMCIA port or wireless network card?

  Good bye

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• Error: unable to contact IP driver, code 2 error unable to connect to the internet.

  Original title: failed to contact the driver of the intellectual property, the error code 2.

  Using XP Pro SP3 with MSE, I got, perhaps, AV Protection 2011 virus. After cleaning, I couldn't connect to internet... Internet access icon showed I was connected, but I was unable to connect to any site. On startup, I got the error that spampal is unable to use port 110 and this that I solved it by uninstalling Spampal. As a result, I now get 'unable to contact driver ip, code 2 error '. Device Manager will not display any errors.

  I did reset winsock.

  IPCONFIG/all reports ~ an internal error: the request is not supported.
  Contact the Services de Support technique Microsoft for assistance.
  Additional information: host name of request impossible.

  Are there instructions to resolve intellectual property issues or should I do a system recovery?

  I thought that MicroSoft offers no support virus of cost recovery. Which would include management of this problem?

  Follow-up... I found some good suggestions that I'll try to Jack MVP and Molly Mae found at the related link ~ thank you

  Loss of the internet wireless connection, do not seem to have an ip address now, need help!

  Error code 2 is BACK to talk about 'file not found '.

  If you see this:

  Windows IP configuration

  An internal error has occurred: the request is not supported.
   
  Contact the Services de Support technique Microsoft for assistance.

  Additional information: host name of request impossible.

  Take a look in the folder c:\windows\system32\drivers for this file (assuming that XP is installed on your C drive):

  Tcpip.sys

  If the file is missing, you must replace it.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Look there for a backup copy of the file tcpip.sys and paste in the c:\windows\system32\drivers folder where it belongs.

  If you do not see a copy in the dllcache folder, search for a copy here:

  c:\windows\ServicePackFiles\i386

  If you do not see here, you can download it from my SkyDrive and network disks exceeds the system afflicted on a USB or floppy drive.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called tcpip when the name of the file should really be called tcpip.sys (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• I'm unable to download the video driver for an Aspire 7540 - download is infected

  I'm unable to download the video driver for an Aspire 7540, because the download is infected. Who can be contacted to alert their site Acer seems to have infected files? I checked for a link to the webmaster but could not find one.

  Hi Simon,.

  The ATI for the Aspire 7540 driver was released over 6 years ago and has been downloaded tens of thousands of times. I downloaded and tested the file on our network of company without problem. I think that you can experience a false positive if your anti-virus is indicating that he has a problem.

  Cory

• Viva Piñata was unable to locate the DVD - ROM drive

  Hello!

  I installed the game Viva Pinata on Windows XP Pro in English when I try turn on the game there is a message like: unable to locate the DVD - ROM drive.

  On the other computer (Windows 7) it works very well!

  What does not help?

  -Instalation of safedisc.exe.

  Help me please!

  Hi MarcinKowal,

  ·         Did you do changes on the computer before the show?

  ·         The installation of the game Viva Piñata was successful?

  You can read the following article and check if the problem still persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Let us know if that helps.

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.