Unable to ssh to the host after 4.1 update

Since we improved our guests to 4.1 the local user that had been created with the permissions "To grant access to the shell" if we do not have

to enable ssh root access stopped working.

Anyone know what could cause this?

Take a look at this thread:

http://communities.VMware.com/thread/275973

André

Tags: VMware

Similar Questions

  • Unable to connect to the internet after getting an update from Microsoft, Windows Vista Help

    After getting an update Microsoft my computer will connect is the internet. All services are disabled. I didn't get the updates and restarted my computer. How can I get services running again. When I did an IPCONFIG command output and renew it says RPC server is unavailable.

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Understanding Windows Update and Extras in Windows Vista at the link above.

     

    Remove the Vista updates; two ways to do this:

    1. a System Restore to before the updates:

    Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

    If you use Norton, disable it before using the system restore.

    If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

    Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

    System restore steps according to the info above.

    Also:

    2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

    > then click the one that you don't want > uninstall will appear at the top > uninstall it.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

    > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

    When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

    > or if you do not need an individual > right-click on > UAC prompt > hide it

    See you soon.

    Mick Murphy - Microsoft partner

  • Unable to connect to the internet after each recent updates critical 3

    After each of the recent 3 updates critical which download automatically on my laptop, I can't connect to the internet then... I had to do a system restore to before this update every day and every time this has happened... What can be done about this problem?

    Split of an independent thread on Windows Live Mail on Windows 7 Starter 

    Have you, after restoring the system, manually installed one of the versions of the three updates and rebooted the computer - verified that everything works and...

    If so, did the same with the next update (installation, restart, check) and so on until all are installed...

    If not uninstalled the update you just installed, rebooted and installed the other updates and restarted, one of the versions checked if things worked, and if so, did the same with the next update (installation, restart, check) and so on until that all are installed other than one that caused problems?

    What are the KB # s of each of three updates in question?

  • ' Could not connect: unable to connect to the host localhost: connection refused "on variuos orders

    On ESX 4.0.0 Update 1.

    When I run a command like "vim-cmd/hostsvc/hostsummary | "grep inMaintenanceMode" or vimsh - n - e/hostsvc/maintenance_mode_enter ' / 'vimsh - n - e
    "/ hostsvc/maintenance_mode_exit" all returned the same error message ' could not connect: unable to connect to the host localhost: connection refused.

    I checked the checked the file /etc/resolv.conf Bed & Breakfast.

    I am able to ssh on the server as well as the use of WinSCP without any problem.

    I can connect with the VI Client also without problem.

    Any ideas?

    The problem has been resolved.

    The fix:

    =====

    # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

    Using the libcrypto, version 90809F

    inMaintenanceMode = false,

    # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

    inMaintenanceMode = false,

    Rationality for the problem is these commands (vim - FCM or vimsh) were unable to communicate due to lack of xinetd process.

    # ps - ef | grep-i xinet

    root 11527 25978 0 04:30 pts/0 00:00:00 grep-i xinet

    # service xinetd restart

    #

    # Service xinetd status

    #

    # service xinetd start

    # Service xinetd status

    # /etc/init.d/xinetd ls

    /etc/init.d/xinetd

    / * But NETWORK seems to be normal on the server * /.

    # cat /etc/resolv.conf

    nameserver 172.26.6.21

    nameserver 172.25.6.51

    # ifconfig

    Lo encap:Local Loopback link

    INET addr:127.0.0.1 mask: 255.0.0.0

    RACE of LOOPING 16436 Metric: 1

    Dropped packets: 6053620 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 6053620 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:0

    RX bytes: 2021352939 (1.8 GiB) TX bytes: 2021352939 (1.8 GiB)

    ppp0 link encap:Point - to-Point Protocol

    INET-addr:164.152.87.72 P - t - P:164.152.87.64 mask: 255.255.255.255

    Up POINTOPOINT RUNNING NOARP MULTICAST metric MTU:1500: 1

    Fall of RX packets: 208 errors: 2:0 overruns: 0 frame: 0

    Dropped packets TX: 205 errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:3

    RX bytes: 18165 (17.7 KiB) TX bytes: 22314 (21.7 KiB)

    vmnic100200 Link encap HWaddr 00: 1B: 21:6 A: C9:C4

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 1383869 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 1382815 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 90351869 (86.1 MiB) TX bytes: 92106912 (87.8 MiB)

    Interruption: 97

    vmnic100201 Link encap HWaddr 00: 1B: 21:6 A: C9:C5

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 24239456 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 23905751 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 2078777971 (1.9 GiB) TX bytes: 2226266024 (2.0 GiB)

    Interruption: 113

    vmnic100600 Link encap HWaddr 00:25:5 C: 2: 75:30

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 13076343 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 5226061 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 1292112365 (1.2 GiB) TX bytes: 1224021381 (1.1 GiB)

    Interruption: 129

    vmnic100601 Link encap HWaddr 00:25:5 C: 2: 75:31

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 819469 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 770101 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 56287946 (53.6 MiB) TX bytes: 52499576 (50.0 MiB)

    Interruption: 137

    vmnic110200 Link encap HWaddr 00: 1B: 21:6 A: CA:44

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 1774795 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 1681079 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 142435399 (135.8 MiB) TX bytes: 135079293 (128.8 MiB)

    Interruption: 145

    vmnic110201 Link encap HWaddr 00: 1B: 21:6 A: CA:45

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 21079616 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 20688606 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 1859632344 (1.7 GiB) TX bytes: 1852761835 (1.7 GiB)

    Interruption: 161

    vmnic110600 Link encap HWaddr 00:25:5 C: 2: 75:32

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 39205375 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 21339531 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 32420064542 (30.1 GiB) TX bytes: 3709579479 (3.4 GiB)

    Interruption: 177

    vmnic110601 Link encap HWaddr 00:25:5 C: 2: 75:33

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 2922150 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 2110634 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 398811808 (380.3 MiB) TX bytes: 245899848 (234.5 MiB)

    Interruption: 185

    vswif0 Link encap HWaddr 00:50:56:41:76:EB

    INET addr:172.26.6.13 Bcast:172.26.6.255 mask: 255.255.255.0

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Dropped packets: 109779 RX errors: 0:0 overruns: 0 frame: 0

    Dropped packets: 23715 TX errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 10137604 (9,6 MiB) TX bytes: 21716347 (20.7 MiB)

    vswif1 Link encap HWaddr 00:50:56:40:30:F7

    INET addr:172.26.7.11 Bcast:172.26.7.255 mask: 255.255.255.0

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Fall of RX packets: 36515 errors: 0:0 overruns: 0 frame: 0

    Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 3702390 (3,5 Mio) TX bytes: 168 (168,0 b)

    vswif2 Link encap HWaddr 00:50:56:4 A: DF:1 B

    INET addr:172.26.8.11 Bcast:172.26.8.255 mask: 255.255.255.0

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Fall of RX packets: 20525 errors: 0:0 overruns: 0 frame: 0

    Dropped packets TX: 6 errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 2742990 (2.6 MiB) TX bytes: 252 (252.0 b)

    vswif3 Link encap HWaddr 00:50:56:4E:1E:24

    INET addr:172.26.9.12 Bcast:172.26.9.255 mask: 255.255.255.0

    RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

    Fall of RX packets: 26408 errors: 0:0 overruns: 0 frame: 0

    Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

    collisions: 0 txqueuelen:1000

    RX bytes: 3095970 (2.9 MiB) TX bytes: 168 (168,0 b)

    # / opt/ft/bin/ftsmaint lsVnd

    Virtual network device (VND) groups

    ===================================

    Status of group name

    --------------------------

    vSwitch0 ONLINE

    vSwitch1 ONLINE

    vSwitch2 ONLINE

    vSwitch3 ONLINE

    Members of the Group of VND

    =================

    Link Group Name status Interface link state speed

    --------------------------------------------------------------------------

    vmnic100200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

    vmnic100201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

    vmnic100600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

    vmnic100601 vSwitch1 DUPLEX UP LINK 1000 Mb/s-FD

    vmnic110200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

    vmnic110201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

    vmnic110600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

    vmnic110601 vSwitch1 DUPLEX UP LINK

    1000 mb/s-FD

    / * Further consideration on the problem of starting XINETD * /.

    Further examination shows that the xinetd is unable to start because he believed NETWORK unavailable.

    Starting xinetd uses the contents of the sysconfig file where there was an entry incorrect "NETWORKINcesv = yes". We have corrected this entry and restarted xinetd process.

    After this correction, xinetd is restarted, the system seems to be normal.

    # cat sysconfig

    NETWORKINcesv = yes

    HOSTNAME = Server.test .net

    GATEWAY = 172.26.6.1

    IPV6_AUTOCONF = no

    NETWORKING_IPV6 = no

    #

    # cat sysconfig

    Networking = yes

    HOSTNAME = Server.test .net

    GATEWAY = 172.26.6.1

    IPV6_AUTOCONF = no

    NETWORKING_IPV6 = no

    # ps - ef | grep-i xinet

    root 27977 25978 0 04:41 pts/0 00:00:00 grep-i xinet

    # service xinetd start

    [From xinetd: OK]

    # ps - ef | grep-i xinet

    root 28119 1 0 04:41?        00:00:00 xinetd - stayalive - pidfile /var/run/xinetd.pid

    root 28239 25978 0 04:42 pts/0 00:00:00 grep-i xinet

    #

    # service xinetd restart

    [Judgment of xinetd: OK]

    [From xinetd: OK]

    # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

    inMaintenanceMode = false,

    # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

    Using the libcrypto, version 90809F

    inMaintenanceMode = false,

    #

  • vCenter Server displays the error message: unable to connect to the host

    vCenter Server displays the error message: unable to connect to the host

    Symptoms

    • vCenter Server cannot connect to a host when you perform operations such as:

    •

    o Storage vMotion

    o cold migration

    o cloning a virtual machine

    o the model deployment

    • Newspapers vpxd that contains an entry similar to:

    [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

    • You see errors similar to:

    Unable to connect to the host o

    o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

    • vCenter Server shows the VMS as being disconnected then connected.

    Hello

    Resolution

    Cause

    This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

    Check the cause

    To check the cause of the problem:

    1. Log in as root to the ESX host using a SSH client.
    1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:


      10.21.48.121

      Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

    Troubleshooting

    If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

    1. Disconnect and then reconnect the host:
    1. Right click on the ESX host in vCenter Server and click Disconnect.
    1. Reconnect the ESX host in vCenter Server.
    1. Restart the VirtualCenter agent on the ESX host:
    1. Stop the service of vpxa with the command:

      # service vmware-vpxa stop

    1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
    1. Start the service of vpxa with the command:

      # service vmware-vpxa start

      Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

    1. Rebuild the VirtualCenter agent on the ESX host configuration file:

      Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

    1. Right click on the ESX host in vCenter Server and click Disconnect.
    1. Remove the ESX host disconnected from vCenter Server.
    1. Backup the file vpxa.cfg with the command:

      # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

    1. Add the ESX host disconnected to the server vCenter inventory.
    1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

      # cat /etc/opt/vmware/vpxa/vpxa.cfg

  • Error created another Console service, unable to connect to the host by vSphere vCenter

    After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?

    Thank you.

    George

    This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.

    http://KB.VMware.com/kb/1000266

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

    Twitter: http://twitter.com/mittim12

  • migrate storage fails with 'unable to connect to the host.

    I'm trying to migrate storage of a virtual machine to a different data store. (on the same san)

    When I start work, I see the task:

    Moving the virtual machine / status 'in process '.

    After 10 minutes, I get 2 pop-up windows:

    -

    Error

    -

    Unable to connect to the host.

    -

    Ok

    -

    I tried to move the storage of another virtual machine, but I got the same error.

    Also tried a different vmhost (but same cluster), but also the same error.

    When you try to a host in a different cluster, it works without problem (same san/store data used in the cluster where I got the errors)

    There is no difference in the profile of security on the host computers.

    Any tips?

    Logfile attached (vpxd - 353.log) when I was running the migrate storage.

    Part of the error:

    2009-11-03 16:49:07.035 02464 info "App" (1257263347020035) VMotion began

    2009-11-03 16:58:35.903 02464 error "App" (1257263347020035) VMotion failed: vim.fault.HostConnectFault

    When it works ok:

    2009-11-03 17:29:49.470 02456 info "App" (1257265789470153) VMotion began

    Hello.

    See KB 1010837.

    Good luck!

  • Unable to connect to the host server: a connection attempt failed because

    Hi all

    I install my host ESX server in vmware workstation.  It works fine except when I am creating virtual machines.

    I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.

    Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no

    to answer.  Do you want to retry?

    My ESX server hosts have static IP addresses.

    I've seen a few similar posts on this issue, but their solutions have not worked for me.

    Best regards

    Nathan

    I think we confuse you.  ESX server is running like a machine virtual within the workstation, correct?  If Yes, then you must edit the vmx esx server with these entries monitor configuration file *.  They can go anywhere in the file.  Once those have been added, you should be able to run 32-bit virtual machines within the esx server.

    -KjB

    VMware vExpert

  • "Unable to connect to the MKS: unable to connect to the host [servernamehere] failed on vSphere 4.0 and client.

    Anyone have this problem?  I loaded vSphere 4.0 host ESX 3.5 and everything seems to work very well yesterday, after sleep more testings and this error arose:

    "Unable to connect to the MKS: unable to connect to the host failed on vSphere 4.0 and client.

    After a google search, I could it is resolved by placing the DNS entries on the client machine c:\windows\system32\drivers\etc\hosts file point to my ESX host name and domain name FULL name runs and it worked fine.  I'm curious to know why this went well?

    What is MKS mean in this case?  Server key from Microsoft or the key management server?

    If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

    Kind regards

    Stefan Nguyen

    VMware vExpert 2009

    iGeek Systems Inc.

    VMware, Citrix, Microsoft Consultant

    When you click on the console of a virtual machine, the server that hosts the vm responds back with its host name for your client to connect to.  Thus, the MKS console could not be connected to, and you could not see the virtual machine console, until you updated name resolution.  Given that the ESX host is back with a name, the customer could not resolve the name, if your client could not connect to the virtual computer mouse, keyboard, screen.  Hope that makes more sense.

    -KjB

    VMware vExpert

  • Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

    I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

    msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.
     
     

  • Unable to connect to the host.   Error: The specified version is not found

    vmrun-t esx h https://192.168.1.123/SDK u root Pei password list

    Unable to connect to the host.

    Error: The specified version is not found

    Any ideas why it does not work?  It is run on a Windows XP workstation.  The target server is on the local network and running ESXi 4.1.  The vmRun version is 7.1.2 and is installed with Workstation 7.1.2.

    I also tried Ubuntu 10.04 with vmRun from a Workstation 7.1.2 installation.  There, he also fails with the same error.

    Note that ESXi 4.1 is used to test installation is not allowed and is running in demo mode.  Management of the vSphere client works without any problem the same Windows XP workstation.

    Any help would be appreciated.  Thank you.

    You must install the full package of VIX by http://communities.vmware.com/community/developer/downloads. It contains only components to manage the workstation. Please note that I had to install in the VIX 1.10.1 order then Workstation 7.1.2 to get both to work on my Windows 7 computer.

  • Time required for reconnection to the host after vc upgraded

    Hello, vSphere Upgrade Guide says (page 43) on vc migration-related service interruptions

    VMware believes that the upgrade requires vCenter Server out of production for 10 minutes, more

    15 to 20 minutes for the upgrade of the database schema, depending on the size of the database. This estimate

    does not host reconnection after the update.

    Anyone know the time required by the reconnection of the host after Virtual Center upgraded (by experience, even with migartion to vc 2.x)?

    2-5 minutes if vCenter service started

    ---

    MCSA, MCTS, VCP, VMware vExpert 2009

    http://blog.vadmin.ru

  • ESXi 5.5 build 2456374 is unable to reconnect to the vcenter after reboot

    Hello

    Have been hitting my head against it for the past few weeks. A host that has worked very well to a previous 5.5 build fails to reconnect to the vcenter after reboot once upgraded to build the 2456374. This also happens to the newly built guest. When a reconnection is started manually, it produces up to 80% (data of the host processing), then dies with a "general system error: internal error. I tried to remove the vpxa account, resetting the config network via the console, Cup NIC of the vswitch, removal of additional interfaces vkernel. The network via the console configuration reset allows me to reconfigure the net and tie vcenter and complete the host host configuration. However, as soon as I restart the host, is no longer, it reconnects to vcenter and I'm back where I started.

    Unfortunately, this is not a 100% event. If I rebuild a host enough times, one of the new buildings will finally works correctly.

    any ideas on how to solve this problem would be appreciated.

    Elmārs

    QUESTION REOLVED!

    Ok. so that was the easy part. Open a folder with vmware to identify the cause for this. After much digging, friction, pull hair, we found a clue in the hostd.log on the ESXi host.

    2015-04 - T 02, 04: 49:05.481Z [23381 B 70 error 'Hostsvc.NetworkProvider' user opID=HB-host-185064@917-1d029f4d-d2 = vpxuser] an error occurred during extraction of stack instance configuration: incompatible value of ccalgo for the Netstack instance: defaultTcpipStack.

    In my network performance test I did recently, I have significantly improved network iSCSI performance from the cubes NewReno network congestion control algorithm. For each of these hosts, as part of the installation procedure I now set the control algorithm of congestion on cube through the web interface. Finally, it is a little bug with that VMware believed fixed. Is not.

    To confirm doubling you encounter this problem, connect to the host (ssh or remote cli) and run the following command:

    list of esxcli ip network netstack

    You should get a message saying that there is an inconsistency in the netstack configuration.

    To fix, run the following command:

    esxcli network ip put netstack defaultTcpipStack cubic n - c

    the netstack from above list command should now display detailed information and will now be able to connect to vcenter.

    If I understand correctly, an article will be published on this in the near future.

  • Unable to put the bookmark bar on the page after your last update

    MONITORING INDICATES TO BOOKMARK BAR BUT IT WON'T SHOW WENT TO CUSTOMIZE BAR BOOKMARK CHECKED AND CLICK ON CUSTOMIZE AGAIN WHICH SHOULD PLACE IT UNDER THE SEARCH BAR BUT DOES NOTHING. THIS HAS HAPPENED AFTER YOUR LAST UPDATE.
    ANY IDEA?
    Thank you

    Hello

    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    If this does not work, maybe it's time to try refresh (called "Reset" in older versions of Firefox) which can resolve many issues by restoring Firefox as his default from factory and save your bookmarks, history, passwords, cookies, and other essential information.

    Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

    Refresh for Firefox:

    1. Open the troubleshooting information page using one of the following methods:

      • Click the menu button

        click Help

        and select troubleshooting information. Should open a new tab containing your troubleshooting information.

      • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
    2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
    3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
    4. Click Finish and reopen Firefox.

    This corrects the problem? Please report to us!

    Thank you.

  • 'Unable to connect to the server' after updating to iOS 9.3

    After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!

    It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.

Maybe you are looking for

  • Unable to connect to 127.0.0.1 LAN network problems

    Hello everyone I have a few problems on my LAN to my mac pro book. I try to connect to the LAN servers on various different pieces of software running on different machines, but my mac does not collect and connect to external servers on 127.0.0.1. I

  • Tecra 9100: Media Test failure - check cable then turns off

    Hello I have a Tecra 9100 and I got it at low cost and hoping to make it work for my son to do his homework on but its got a problem. First he came without a hard drive (on order) then when I turn it on I get + media test check the cable failure then

  • .905 update on the way!

    http://support.verizonwireless.com/PDF/system_update/droid_bionic_instructions.PDF

  • No sound on Dell Latitude D520

    Dell Latitude D520 was in a good condition, a few weeks ago, regarding the sound and programming settings, functioned at that time here. Someone handed the laptop down to me and from that point is when I started having problems who never were a probl

  • Ultiboard - unable to get a connector SCSI 68

    New to Ultiboard, so I could use some help! We were able to create a fingerprint for line 4, staggered 68 pins SCSI Connector (Honda PCS-E68LMD). The netlist identifies all serving pine when the part is imported from Ultiboard 10.1, but Ultiboard wil