ESXi 5.5 build 2456374 is unable to reconnect to the vcenter after reboot

Similar Questions

• WLS-9163 is unable to reconnect in wireless mode after reboot in a WLAN with broadcasting SSID

  Initial configuration is defined by MAX using cable.  Wireless configuration is DHCP, with Infrastructure, WPA - PSK.  I save the settings and unplug the wired connection.  Then I delete the original instrument from the list of devices OR DAQmx of MAX.  Then I do a 'find network DAQmx Devices'.  The wireless device is discovered and works (self-test passes).  WLS link on the device indicator is green.

  Then, if I cycle power on the 9163, the WLS link never comes.

  This seems to be because my thread is not broadcasting an SSID.  If I go to a nearby access point and turn on the SSID broadcast, the WLS Link LED lights and MAX can review system.

  Is there a way to make the 9163 connect to a WLAN that don't broadcast a SSID?

  Burned - salvation

  First of all, thank you for the detailed notes. This helps a lot. You have the right version of DAQmx; now, we just need to upgrade the firmware. Here's how:

  After you have added the device in MAX (preferably on an Ethernet connection), click the button "Update Firmware":

  

  You will get a window that looks like this, where you can see what version of firmware you have. Click the folder to find the new firmware. It takes by default in a directory on your hard drive that contains the file 'ni9163fwROM.cfg' (if that's not listed for some reason, you can find it here: C:\Program Files\National Instruments\NI-DAQ\fpgafiles\mionetwork\ni9163)

  

  After the start of the update, you will look at a window of the scrollbar for a minute or two. Then, the device will be auotmatically reboot. You may need to reconfigure your settings after the update.

  Regarding the deletion/time that you did. You should not. After you have configured the wireless, you should see an IP address in MAX on the wireless tab. If she is not there, click "Refresh" now you can pull the Ethernet cable and continue to use the device. (If you want to convince yourself, click on the "Refresh" button again and you will see that the "Link Status" for the "Wired" connection is "down".)

  I hope this helps. Let us know what happens. Thank you

• 'Unable to connect to the server' after updating to iOS 9.3

  After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!

  It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Unable to connect to the internet after the removal of important processes in the task bar

  I am not very tech-savvy then let me explain.

  I have a laptop Lenovo I recently bought in August 2014.  A friend suggested that I have download the free application "Open Office" in line, so I could open a school power point.  Open Office gave me a handful of viruses, which I managed to delete, then having served the system well, panic I accidentally opened the Task Manager and deleted a bunch of processes that are running.

  Now, I find that, although I am connected to WiFi, I can't open Internet.  I click on Firefox, but it shows that I am unable to connect to the Internet.

  I have Windows 8; an easy way I can solve this problem?

  Thank you.

  Original title: I accidentally turned off the program that allows my computer to connect to the Internet

  Hi Tunasushiroll,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  The problem can occur for various reasons, including incorrect TCP/IP settings configured, firewalls third of anti-virus programs blocking the connection, or due to bad the advanced sharing settings. So, I would suggest trying the following methods and check if you system is able to detect the wireless network.

  Method 1:

  Run the troubleshooter network first, and then test your Internet connection.

  Open the Network Troubleshooter by hitting on any fly in the Dashboard screen, quilting Search(or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), entering the network troubleshooterin the search box, type, or by clicking settingsand then by typing or clicking on identify and fix network problems.

  If the problem persists, try the following method.

  Method 2:

  Second of all, please check if the WLAN service is started and set to automatic. If it is stopped, then I suggest you to start the service and set it to automatic.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Select the Autoconfiguration WLAN service in the list and double-click it.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click apply and then click OK.
  5. Restart the computer and verify if the network is detected. If this is not the case, go to method 3.

  Method 3:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X, click prompt (Admin).
  2. Please enter the following commands and press ENTER after each one.

     netsh int ip reset resetlog.txt
     netsh winsock reset
     ipconfig/registerdns
     ipconfig/flushdns
     ipconfig/release

  3. Restart the computer to check the issue.

  Check if the system is able to detect the network. If this is not the case, go to method 4.

  Method 4:
  Temporarily disable the security software (if any), and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• VirtualCenter (2.5-4 ESXi): Could not connect to host "unable to communicate with the specified host.

  Reading this article (http://communities.vmware.com/thread/173890), I'm having a similar problem with VCentre 2.5 connection to ESXi 4 guests, but this article uses commands that don't work with my version of ESX (e.g. rpm - qa | grep vpxa, produced "not found RPM). In addition, article following (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003714) does not the commands I should use. Any ideas what command can I use it please?

  Baseliner - you must upgrade VC first and foremost, when you run the upgrade to ESX 4.

  vSphere will support older ESX host, but 2.5 does not support ESX 4.0.

  Take a look at the upgrade guide:

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_upgrade_guide.PDF

  Good luck.

• Unable to connect to the internet after installing the xp of origin on a new hard drive.

  I get the message not connected area. I know that the connection is ok because I ask this question on another computer using the same ethernet cable.

  Hello

  Hold down the Windows (between Ctrl and Alt) key and press the Pause break key. What is stated in the "system:"section (specifically looking for anything that tells you what is your level of service current pack, which will be either 1, 1, 2, 3 or nothing shown)? "

  Second, please do the following...

  • Click Start
  • Click on run
  • Type devmgmt.msc and press ENTER, this will open Device Manager window
  • Enlarge (click on +) on the section network cards - what is listed?
  • Similarly, what is listed under other devices?

  In addition, indicate the mark, the serial number and model of your PC, or if it is a custom build, of the brand and model of your motherboard.

  I suspect that you have missing drivers after re-installing. These will be available on the PC or motherboard manufacturer's Web site. You may have received a driver CD with the PC that would also contain the drivers.

  Tricky

• Unable to connect to the internet after the removal of system tool virus

  A computer running Windows XP Media Center Edition Version 2002, Service Pack 3 has got a virus System Tool which I believe I deleted using the key of activation and then run Malwarebytes' Anti-Malware.  On reboot, the system tool icon was still in the system tray, so I ran Norton 360 to remove unwanted registry files.  He got rid of the icon in the system tray.  I also then removed the Malwarebytes software.  Please note that, while I was removing the virus, I was able to connect to AOL so that in mode safe mode with networking.  Finally, who has stopped working.  The Malwarebytes software has been downloaded on the infected computer with a flash drive from a computer with working internet.

  I cannot now connect to the internet with Internet Explorer 8 or AOL (under standard or secure modes).  When you are trying to connect with IE8, the message reads 'Internet Explorer cannot display the web page' and when I run the diagnostic tests, it indicates there is a problem with the modem and/or router.  These devices are, however, both the work that there are other computers connected to them and they work.

  I tried Microsoft solutions are answers to a similar question.  Unfortunately, none of them worked in my situation.  They have been in accordance with the following:

  No doubt...

  What happens when you try to connect to the Internet?

  What is your version of XP, the version of Service Pack and IE?

  What method did you relieve your system of affection 'Antivir Solution Pro' (how confident you are that you got rid of him)?

  Generally, any part of this procedure is necessary after removing Antivir Solution Pro (a well documented removal procedure would have included the steps to cancel Internet connectivity issues).  I would get my infected system and try the procedure you used to see how it works.

  If, when you try to connect with Internet Explorer, you see something like:

  Internet Explorer cannot display this webpage
    
  The most likely causes:
  You are not connected to the Internet.
  The Web site encounters problems.
  There could be a typing error in the address.

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your Internet disabled in certain situations.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to start the network settings of Internet control panel applet properties, connections.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically

  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Also, I typed cmd in the start run box and the command-line entered ipconfig enough and ipconfig/renew.  This is also not rectify the situation.

  For your assistance, the following is a copy of a part of the file that I thought that may be applicable after that I typed in miscinfo32 in start, run box:

  Summary of the system:

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  System FIELD name
  System manufacturer Dell Inc.
  Dimension of the model 8400 system
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz
  A04 BIOS Version/Date Dell Inc., 10/01/2005
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  CHAMP\steve user name
  Eastern Daylight Time zone
  Total physical memory 1 024,00 MB
  Available physical memory 534,65 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Swap file space 2.40 GB
  Paging file C:\pagefile.sys

  Network card:

  Name [00000001] Broadcom NetXtreme 57xx Gigabit Controller
  Adapter Type Ethernet 802.3
  Product Type Broadcom NetXtreme 57xx Gigabit Controller
  Installed Yes
  ID of device PNP PCI\VEN_14E4 & DEV_1677 & SUBSYS_01771028 & REV_01\4 & 1D7EFF9E & 0 & 00E0
  Last reset 23/03/2011 14:51
  Index 1
  B57w2k service name
  IP 192.168.1.102
  IP 255.255.255.0 subnet
  Gateway IP 192.168.1.1
  Active Yes DHCP
  192.168.1.1 DHCP server
  DHCP lease expires on 2011-03-24 15:22
  DHCP lease obtained 23/03/2011-15:22
  MAC address 00:11:11:CB:96:8 D
  0xDCFF0000-0xDCFFFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\b57xp32.sys (7.73.0.0 built by: WinDDK, 181,75 KB (186 112 bytes), 1980-01-01 01:00)
   
  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 23/03/2011 14:51
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
   
  Name [00000003] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 3
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:11:11:CB:96:8 D
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
   
  Name [00000004] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 4
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 10/08/2004-07:00)
   
  Name [00000005] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 5
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 10/08/2004-07:00)
   
  Name [00000006] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 6
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 10/08/2004-07:00)
   
  Name [00000007] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 23/03/2011 14:51
  Index 7
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 10/08/2004-07:00)
   
  Name [00000008] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  8 index
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 10/08/2004-07:00)
   
  Name [00000009] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 23/03/2011 14:51
  Index 9
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  16:4 MAC address: 20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
   
  Network adapter 1394 name [00000010]
  Adapter Type Ethernet 802.3
  Product Type 1394 network adapter
  Installed Yes
  V1394\NIC1394\9103858423C01 PNP device ID
  Last reset 23/03/2011 14:51
  Index 10
  Service name NIC1394
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 52:df:35:27:59:E5
  Pilot c:\windows\system32\drivers\nic1394.sys (5.1.2600.5512 (xpsp.080413 - 0852), 60,38 KB (61 824 bytes), 10/08/2004-07:00)
   
  Name [00000011] Miniport Wan WAN (ATW)
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (ATW)
  Installed Yes
  ROOT\NET\0000 PNP device ID
  Last reset 23/03/2011 14:51
  11 index
  WANATW service name
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00:03: 8A: 00:00:15 of MAC address
  Driver c:\windows\system32\drivers\wanatw4.sys (8.3.0.0, 32,80 KB (33 588 bytes), 2005-02-23 22:12)
   
  Name [00000012] Symantec Network Security Miniport
  Adapter Type Ethernet 802.3
  Type of product Symantec Network Security Miniport
  Installed Yes
  ROOT\SYMC_SYMIMMP\0000 PNP device ID
  Last reset 23/03/2011 14:51
  12 index
  Service name SymIMMP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:11:11:CB:96:8 D
  Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)
   
  Name [00000013] Symantec Network Security Miniport
  Adapter Type Ethernet 802.3
  Type of product Symantec Network Security Miniport
  Installed Yes
  ROOT\SYMC_SYMIMMP\0001 PNP device ID
  Last reset 23/03/2011 14:51
  13 index
  Service name SymIMMP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  16:4 MAC address: 20:52:41:53
  Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)

  Network Protocol:

  Name MSAFD Tcpip [TCP/IP]
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 16 bytes
  Message size maximum 0 bytes
  Message Oriented No.
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports shipped data Yes
  Supports graceful closing Yes
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  Name MSAFD Tcpip [UDP/IP]
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 16 bytes
  63,93 Message size maximum KB (65 467 bytes)
  Message Oriented Yes
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast Yes
   
  Name RSVP UDP Service provider
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 16 bytes
  63,93 Message size maximum KB (65 467 bytes)
  Message Oriented Yes
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption Yes
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast Yes
   
  Name RSVP TCP Service provider
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 16 bytes
  Message size maximum 0 bytes
  Message Oriented No.
  Minimum address size 16 bytes
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption Yes
  Supports shipped data Yes
  Supports graceful closing Yes
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] SEQPACKET NetBIOS name 3
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] DATAGRAM 3 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2}] SEQPACKET NetBIOS name 0
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2]} 0 DATAGRAM NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] SEQPACKET NetBIOS name 1
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] DATAGRAM 1 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2}] SEQPACKET NetBIOS name 2
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2]} 2 DATAGRAM NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] SEQPACKET NetBIOS name 4
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] DATAGRAM 4 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] SEQPACKET NetBIOS name 5
  Service numbers without connection
  Guarantees delivery Yes
  Yes guarantees sequencing
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Supports broadcasting no.
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.
   
  MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] DATAGRAM 5 NetBIOS name
  Connectionless service Yes
  Guaranteed delivery no.
  Guarantees sequencing No.
  Maximum address size 20 bytes
  Maximum Message size 62.50 KB (64 000 bytes)
  Message Oriented Yes
  Bytes of address size 20 minimums
  Pseudo stream oriented No.
  Media broadcasting Yes
  Supports Connect Data No.
  Supports disconnect Data No.
  Supports encryption no.
  Supports data dispatched No.
  Supports graceful closing No.
  Supports guaranteed bandwidth Yes
  Supports multicast No.

  WinSock network:

  File c:\windows\system32\winsock.dll
  Size of 2.80 KB (2 864 bytes)
  Version 3.10
   
  File c:\windows\system32\wsock32.dll
  Size 22,00 KB (22 528 bytes)
  Version 5.1.2600.5512 (xpsp.080413 - 0852)

  Summary of Internet Explorer:

  Version 8.0.6001.18702
  Build 86001
  Ask the path C:\Program may Explorer
  English (United States)
  Active printer Dell AIO Printer A920, winspool, Ne04:
   
  Level of 128-bit encryption
  Disabled Access Manager
  IEAK install not

  Internet Explorer Versions of files:

  Actxprxy.dll 6.0.2900.5512 96 KB 2008-04-13 20:11:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Advpack.dll 8.0.6001.18702 126KO 08/03/2009 04:32:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Asctrls.ocx 6.0.2900.5512 112KO 2008-04-13 20:08:58 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  browselc.dll 6.0.2900.5512 62KO 2008-04-13 13:03:24 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Browseui.dll 6.0.2900.5512 KB 1 001 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  cdfview.dll 6.0.2900.5512 148 KB 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Comctl32.dll 5.82.2900.6028 603 KB 2010-08-23 12:12:04 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Dxtrans.dll 8.0.6001.18702 211KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Dxtmsft.dll 8.0.6001.18702 340KO 08/03/2009 04:31:44 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  iecont.dll not available not available not available not available
  iecontlc.dll not available not available not available not available
  Iedkcs32.dll 18.0.6001.18968 379 KB 10/09/2010 01:58:03 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Iepeers.dll 8.0.6001.18968 180KO 09-10-2010 01:58:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Iesetup.dll 8.0.6001.18702 70 KB 08/03/2009 04:32:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  ieuinit.inf not available 56 KB 2009-06-29 04:40:16 unavailable C:\WINDOWS\SYSTEM32
  Iexplore.exe 8.0.6001.18702 624KO 08/03/2009 14:09:26 C:\Program may Explorer Microsoft Corporation
  imgutil.dll 8.0.6001.18702 34KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inetcpl.cpl 8.0.6001.18968 1 435 KB 10/09/2010 01:58:06 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inetcplc.dll 6.0.2600.0 108KO 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Inseng.dll 8.0.6001.18702 93KO 08/03/2009 04:32:46 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  MLang.dll 6.0.2900.5512 573 KB 2008-04-13 20:11:57 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  MSENCODE.dll 2000.7.25.0 KB 92 10/08/2004 07:00 not available C:\WINDOWS\SYSTEM32
  Mshta.exe 8.0.6001.18702 45KO 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtml.dll 8.0.6001.18975 5 818 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtml.tlb 8.0.6001.18702 1 601 KB 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Mshtmled.dll 8.0.6001.18972 65KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  mshtmler.dll 8.0.6001.18702 47KO 08/03/2009 04:31:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Msident.dll 6.0.2900.5512 51KO 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Msidntld.dll 6.0.2600.0 15 KB 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  msieftp.dll 6.0.2900.5512 243 KB 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  msrating.dll 8.0.6001.18702 189KO 08/03/2009 04:34:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  mstime.dll 8.0.6001.18968 598KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Occache.dll 8.0.6001.18968 202KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  proctexe.ocx 6.3.2900.5512 80 KB 2008-04-13 20:10:35 C:\WINDOWS\SYSTEM32 Intel Corporation
  sendmail.dll 6.0.2900.5512 54 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shdoclc.dll 6.0.2900.5512 537KO 2008-04-13 13:03:19 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shdocvw.dll 6.0.2900.5512 1 464 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shfolder.dll 6.0.2900.5512 25KO 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Shlwapi.dll 6.0.2900.5912 463ko 08/12/2009 05:23:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  TDC.ocx 8.0.6001.18702 65KO 08/03/2009 04:30:56 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  URL.dll 8.0.6001.18702 104KO 08/03/2009 04:34:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Urlmon.dll 8.0.6001.18968 1 183 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  Webcheck.dll 8.0.6001.18702 231KO 08/03/2009 04:34:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
  WinInet.dll 8.0.6001.18968 895 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation

  Internet Explorer connectivity:

  Dial connection preference never
   
  LAN settings
   
  AutoConfigProxy wininet.dll
  AutoProxyDetectMode disabled
  AutoConfigURL
  Proxy disabled
  ProxyServer
  ProxyOverride
   
  America Online
   
  AutoProxyDetectMode disabled
  AutoConfigURL
  Proxy disabled
  ProxyServer
  ProxyOverride
  Internet programs to use connection not available
   
  Maximum attempts 10
  Waiting between retries 5 sec
  Disconnect idle 20 min time
  Autodisconnect disabled
   
  Modem Intel(r) 537EP V9x DF PCI Modem
  Remote access PPP server
   
  Connect to the network
  Enable Software Compression Yes
  Would require no encrypted password
  Require no data encryption
   
  TCP/IP network protocols
   
  Use server assigned IP address Yes
  The 0.0.0.0 IP address
  Use server assigned NameServer Yes
  Primary addresses DNS name server: 0.0.0.0
  Secondary DNS: 0.0.0.0
  Primary WINS: 0.0.0.0
  Secondary WINS: 0.0.0.0
   
  Use the Compression header IP Yes
  Use the default gateway Yes
   
  Name of the script file

  You have any ideas that could help me find an internet connection?  Thanks for any help.

  The removal of the virus seems to have taken some required system files.  See if the System File Checker helps.  Click Start > run and enter in the field open.

  sfc/scannow

  Press ENTER.  The System File Checker must detect the missing necessary files and put back them.  If this does not work, use a system restore point from before you were infected.  If this does not work, get out of your XP installation diskettes.

• Unable to connect to the internet after the system restore and Windows Installer (Vista)

  Hello

  I have recently restored the whole system on the HP to my sister a virus that I was unable to remove it manually.
  The system restore went well until it has reached the point where he was going to reinstall Windows. The computer just turned itself off and the software installation was not complete. I am able to reinstall again. I must therefore hold the CTRL + alt + delete, go to Task Manager, click on audit.exe and complete the process to turn on the computer. But I can't do anything with it in safe mode. The main problem is: I can't connect to the internet! Even if the network discovery is on it will not find my wireless network. What can I do on the internet? And is it possible to install Windows again without the CD?
  Thanks in advance!

  Hello

  ·        You are able to boot to the desktop in normal mode? If this isn't the case, then you get any code or message?

  ·        How did you did system restore?

  ·        Are you referring to the system recovery using the recovery partition or the drive?

  I suggest that you start in safe mode with network and check if you can access the internet?

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: select SafeMode with networking among the startup options.

  Respond with the required information so that we can help you further.

• Unable to connect to the site after changing the hard drive

  The old hard drive on my Macbook Pro late 2011 crashed and had to be replaced.  I did a complete transfer of Time Machine and reinstalled the original system, OS Lion 10.7.5.  The only program that does not work is Dreamweaver (CS5.5).  When I try to download a page I get an error message long starting, "FTP error - cannot connect to the host.  Dreamweaver can connect to the host "xxxx.com".  This may be due to--the network cable is unplugged. "What went wrong, and what can I do?  My Dreamweaver is already installed on two machines, and it occurs to me that maybe I need to disable it somehow on the old hard drive, but this drive is dead like a stiff so I am unable to judge.  I'm not a Dreamweaver expert or professional site, but use the amateur program to update two Web sites without the help of an another webmaster.  Thank you very much.

  Details of setting up the site in Dreamweaver CS5.5 on Mac are stored in Macintosh HD / Library/Application Support/Adobe/Common/11.5/Sites/Site Pref. It is possible that the file has been corrupted or it has not been copied with backup.

  The first thing to try is to open the Site Setup dialog box by going to the Site > Manage Sites, chose the site and clicking on the pencil icon to edit the details. Select the servers and see if the server information is correct. If this isn't the case, fix them.

• VM client unable to connect to the network after the migration.

  Hello experts,

  I just migrated a VM from ESX4.0 to ESXi5.5 host, and then upgrade the VM tools already.

  But after that this virtual machine cannot connect to LAN oura.

  Although the network is also configured and fine configuration on the switch.

  Is these any configuration of network related problem on the new host ESXi?

  Thanks in advance.

  Kind regards

  You have several VLANs on your network? If so, you have all shared the VLAN on new esxi host physical?

  You have created virtual machine required with the id portgroup vlan?

  Make sure that the virtual machine network adapter is in a connected state.

  Thank you

  Hentzien

• Unable to connect to the desktop after the Vmware tools update

  Hey guys,.

  I have problems with a Samsung PCoIP device if it refuses to connect to the virtual machine windows 7 since vmware tools has been updated

  I know very little about vmware view, when he tries to connect it connects to the server vmware view, swimming pool and looks like it is going to connect, but all I get is a black screen, then turned to the login prompt

  The PCoIP device can ping the virtual machine

  I can connect to the computer via RDP virtual

  VMware View version 4.6.0 build-366101

  Any help would be great

  The VMware tools install probably brought to light the specific video driver for VMware view. Try reinstalling VMware View Agent and be careful on the VMware Tools updates.

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• Unable to connect to the internet after updating Firefox

  I've upgraded to Firefox 39 earlier and I can not EVEN access the internet. I put it through my phone. NEED of QUICK HELP please. Thank you.

  Try to remove all the rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

  You can also try to contact Norton support.

  • https://community.Norton.com/en/forums

• Unable to connect to the network after upgrade to 9.3.1

  I upgraded my iPod Touch 5th gen 9.3.1 and he "lost" the network password.  After many attempts to re - enter, I said the iPod 'forget' the network and tried again and again... Same result: "Incorrect password" - which it is not, as I checked directly with the modem.  Any suggestions?

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings