Unable to start the service of IDC content

Similar Questions

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start the service to install under Windows 7, get the error 5 access is denied

  THIS PROBLEM IS RESOLVED (PLEASE READ):
  There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

  Here's what I did to fix (this applies to all versions on Windows):

  (1) right click on C:\ (or E:\ whatever one holds your stuff)

  2) go to properties

  (3) under Security, click SYSTEM

  (4) ensure that the SYSTEM has all the permissions on ALL

  NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

  And I'll put the first response as response so that when people search he said answered

  =========================================================

  I went to Serives.MSC and noticed that my Windows Installer service is not started. When I pressed 'Start' (manual, automatic and automatic (delayed start) to start the service, it said 'error 5 access is denied' I'm an administrator, but it did nothing.)

  I tried many things

  I tried 'net user administrator /active' then go to the administrator (the account) and did the same thing, but he did nothing.

  I tried to make another administrator account, and then did nothing.
  When I type "net start MSIServer" in command prompt (ran as administrator), but it says "error 5 access is denied."

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot start the Windows Installer service and get error Error 5 access is denied.

   

  Have you tried to install or uninstall any program?

  The problem may occur may be corrupted Windows Installer engine.

   

  I suggest you follow the steps mentioned below

   

  Method 1: Re-save the installation service

   

  a. click Start, type MSIEXEC /Unregister. in the search box and press enter

  b. Click Start, type MSIEXEC / REGSERVER in the search box and press on enter.

   

  Method 2: File system (CFS) Scan Checker

   

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• I'm unable to start the service for the name of the account to Network Service on Windows Server 2008.

  Original title: name of the account network Service can be resolved correctly on windows French

  I have a service, I want to run under the network service on windows French account. Computer is not in the field, but in the working group.

  Service is installed via install and uses the WinAPI functions to get the name of a valid account of localized, which is the AUTHORITY NT\SERVICE NETWORK.

  The problem is that service fails with errors in the following event viewer:

  (1) service depends on the Net Logon service which failed to start because of the following error:
  The operation was successful.

  (2) this computer is configured as a member of a workgroup, and not as a member of a domain. It is not necessary to perform the service access network in this configuration.

  However, if I go to the properties of this Service, Log On tab and button Browse... to address the NETWORK SERVICE account, it sticks "Network Service" value in field and function successfully starts. Note that it may not resolve the display name 'AUTHORITY NT\SERVICE NETWORK'.

  Another thing is that when I put the computer in the domain that manages all the service suddenly starting with 'AUTHORITY NT\SERVICE NETWORK' account but the system does not transform it in "Network Service" on English windows.

  So is this a bug on a French OS? Is there a solution? How can I get programmatically "converted" version of the account name ('AUTHORITY NT\SERVICE NETWORK'-> 'Network Service')?

  System: Windows 2008 R2 SP1 with the latest updates to the 01/10/2013

  Hi Vadim,

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your question would be more out there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• Unable to start the Service for the Protection of software

  I am running Windows RT on a Lenovo ZTE K3011W-F (aka Lynx). This device has been used by two people before, and so was a previous configuration. I did a factory reset on the device, except Windows now refuses to turn on, so I can't update/customize/upgrade, etc.. It is not immediately ban, but eventually it can be seen as harmful to the security of the system.

  I traced the symptoms to what seems to be a reasonable explanation, that is, the Service for the Protection of software is not running, and when he was invited to run, it returns an error indicating: error 5: access is denied.

  When I go to activate Windows Sidebar "Change PC settings", I saw a button that says active, but it displays a message that says: "not found Activation Error Description.

  Hello

  We will analyze and identify the cause of the problem. The steps described here.

  You may need to correct the time settings and the language.

  a. drag from the right edge of the screen and tap or click settings.

  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)

  b. press or click change PC settingsand then tap or click the time and language.

  c. tap or click to change the set duration automatically off.
  d. under change date and time, press or click change, type or select the correct date and time for your current time zone and then press on change.
  e. tap or click to turn on the time is automatically set back to.

  f. install the latest updates by Windows updates.

  If the problem persists, you can consult this article for more information. You may need to activate the phone using the steps described in the article.

  Get help with activation errors

  http://Windows.Microsoft.com/en-AU/Windows-8/activation-errors

  Hope this information helps. Response with status so that we can help you.

• Windows cannot start the service windows firewall

  My windows Security Center indicates that "the windows firewall is disabled.  When I try to turn it on I get the message "windows is unable to start the service windows firewall."  Any suggestions?

  Hello

  The answer depends on what you have anti-virus security.

  If you have, for example, Norton Internet Security protects your computer, it is using Firewall from Norton.

  If you have 2 firewall of exploitation, which can cause system hangs, slow, etc.

  What Antivirus do you use for computer security?

  If you don't have a Suite of Internet security, protect your computer, scan for Malware:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Could not start the Services "Apple Moble device" in windows (Window 7) from my laptop

  I am unable to start the Services of "Apple Moble device" in windows (using windows 7) to my laptop in order to use iTunes software to work with my iPad.

  Every time when I tried to work with my iPad with the installed iTunes, which prompted because of the Services 'Apple Moble Device"not started, so cannot use the iPad with iTunes. I tried several times to launch the "device Moble Apple' Services manually in the Control Panel, but everytimefailed.

  No matter, I reboot the machine, or remove the iTune and installed it again, it has always failed.

  However, my iPad works fine with other computers, so it should not be the problem of the iPad. What will be the problem with my Windows 7 on my desktop? Will there be other software or services in my laptop had to start or stop me from starting Services "Apple Mobile Device"?

  Hello

  Method 1:  Check that the Apple Mobile Device Service is installed and works using the software component Services MMC snap-in of components:

  (a) on the start menu, click search.

  (b) type services.msc, and then click OK. You will see a list of services.

  (c) view the list alphabetically and make sure "Apple Mobile Device Service" status is "started".

  (d) if the State does not indicate that the service is started, right-click Apple Mobile Device Service and choose Start from the context menu.

  (e) if the service is installed and started, right-click the service and select Restart from the context menu.

  Method 2: If the steps above did not help follow the steps described in the following link and check if that helps.

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1567

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• Waiting to start the service

  Hello

  I ran my current server HOSTS for more than a year and all of a sudden today, I am unable to launch the console. The loading screen stops at "Watiting for starting the service. We have not installed a software or a hardware since last week when we were last use of the service.

  I restarted the server and checked the DB. SQL runs and I can see the DB in SQL Manager. If I rdp to the server, the HPWJA service is started as the HPWSProAdapter. In fact, the only thing that stands out as strange is that services.exe HPWJA service uses a constant % CPU 19 time and 712 MB of ram, it seems that could be high. Other thann that I don't see anything in the registry that look out of place. When I rebooted the server the logged event shows an event where WJA successfully connected to the database.

  I don't see the log files in the installation directory HOSTS.

  Someone at - it all tracks potenital that I can look at to try to solve this problem?

  I opened a case with HP official was quickly remounted for LV 2 support. They sort of looked and were not pressed huge help. Gave me the option to go to LV 3 true root cause analysis, but said it could take a few days to get to the case.

  No more reloading of the box and reconstruction WJA and HP Version Control Repository Manager.

• DRM - failed to start the Service Local DRM error "access denied."

  Hello, I am a newbie of base to the use of DRM. On my pc WIN personal 8.1, I updated to version 11.1.2.3 DRM. The DRM 11.1.2.2 version has been downloaded yesterday and the Local Service of the DRM has been able to start without problem. However, after update today, I am unable to start the Local DRM Service due to an "access denied" error. Any pointers/tips on how to fix? I'm sure it's an easy resolution but I have searched the internet / this blog/documentation without success. Thank you for your time and please let me know if you need additional information.

  Kind regards.

  Understand my own question. When I ran the installer, logged as an administrator does not cause the installer must be run with administrator privileges. I must explicitly run it as an administrator. Rookie and DRM error error disappears once the installation has been completed.

• Cannot start the Services of EMP.

  Hi all

  Here when I try to start the Service EPMA I'm unable to start and an error of : hyperion epma Server service on local computer started and then stopped. When I check with EventViewer, I saw this error

  MISTAKE1:

  [EPMA Server Startup] SVR_ERR_PROCESSMGR_CANT_INIT_SESSIONMGR ERROR: failed to initialize the Session Manager.Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: failed to initialize the Session Manager. -> Hyperion.CommonServices.Exceptions.DataAccessLayerException: to run the server size, database ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT time parameters should be on 'ON '.  Their values are currently 'OFF' and 'OFF', respectively.  For more information, see the product documentation.

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (parameters NameValueCollection, String tablePrefix, String baseNamespace, String schemaVersion, Boolean onlyLoadKnownTables)

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (NameValueCollection, String tablePrefix baseNamespace, schemaVersion String String parameters)

  to Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer... ctor (NameValueCollection parameters)

  At Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize (String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean logAllSQL)

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (String configFileName, Boolean restorePastInstanceSessions, Boolean EnableCaching)

  -End of the exception stack trace internal-

  At Hyperion.DimensionServer.Service.Main.InitializeSessionManager)

  At Hyperion.DimensionServer.Service.Main.Start)

  ERROR2:

  Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Failed to initialize the Session Manager. -> Hyperion.CommonServices.Exceptions.DataAccessLayerException: to run the server size, database ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT time parameters should be on 'ON '.  Their values are currently 'OFF' and 'OFF', respectively.  For more information, see the product documentation.

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (parameters NameValueCollection, String tablePrefix, String baseNamespace, String schemaVersion, Boolean onlyLoadKnownTables)

  to Hyperion.DataAccessLayerCore.DataAccessLayer... ctor (NameValueCollection, String tablePrefix baseNamespace, schemaVersion String String parameters)

  to Hyperion.SessionManager.DAO.SessionManagerDataAccessLayer... ctor (NameValueCollection parameters)

  At Hyperion.DimensionServer.SessionManager.SessionStoreRdbms.Initialize (String rdbmsVendor, String rdbmsConnParams, Int32 rdbmsCommandTimeout, Boolean logAllSQL)

  in Hy...

  But I put both ALLOW_SNAPSHOT_ISOLATION and READ_COMMITTED_SNAPSHOT database settings ON

  It's the query I used

  Epmdb ALTER DATABASE SET READ_COMMITTED_SNAPSHOT ON;

  Epmdb ALTER DATABASE SET ALLOW_SNAPSHOT_ISOLATION ON;

  Even if I'm unable to start, same error was meditating.

  Can anyone suggest me what can do to solve this problem.

  Thanks in advance.

  Hello

  If this is the new installation, try this:

  Stop EPMA Services database EPMA existing to delete and create the new database with the SET options and configure EPMA with this database.

  ALTER DATABASE MyDatabase

  SET READ_COMMITTED_SNAPSHOT ON

  ALTER DATABASE MyDatabase

  ALLOW_SNAPSHOT_ISOLATION DEFINED ON

  Start the Services of EPMA.

  Thank you

  Mady

• DSC error: IAK_SHARED failed to start the service

  When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

  Thank you

  Tom

  Hi Tom,

  This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

  Gregory C.

• Windows could not start the service on the Local computer Windows event log. Windows 2008 R2 server

  When I try to start the event log service can I have on my server (Windows 2008 R2), I get the following error:

  "Windows didn't start the service on the Local computer Windows event log."

  Error 2: the system cannot find the specified file. »

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!