Unable to suspicion (T, BROADCASTING NO) PQ_DISTRIBUTE

Similar Questions

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• WLS-9163 is unable to reconnect in wireless mode after reboot in a WLAN with broadcasting SSID

  Initial configuration is defined by MAX using cable.  Wireless configuration is DHCP, with Infrastructure, WPA - PSK.  I save the settings and unplug the wired connection.  Then I delete the original instrument from the list of devices OR DAQmx of MAX.  Then I do a 'find network DAQmx Devices'.  The wireless device is discovered and works (self-test passes).  WLS link on the device indicator is green.

  Then, if I cycle power on the 9163, the WLS link never comes.

  This seems to be because my thread is not broadcasting an SSID.  If I go to a nearby access point and turn on the SSID broadcast, the WLS Link LED lights and MAX can review system.

  Is there a way to make the 9163 connect to a WLAN that don't broadcast a SSID?

  Burned - salvation

  First of all, thank you for the detailed notes. This helps a lot. You have the right version of DAQmx; now, we just need to upgrade the firmware. Here's how:

  After you have added the device in MAX (preferably on an Ethernet connection), click the button "Update Firmware":

  

  You will get a window that looks like this, where you can see what version of firmware you have. Click the folder to find the new firmware. It takes by default in a directory on your hard drive that contains the file 'ni9163fwROM.cfg' (if that's not listed for some reason, you can find it here: C:\Program Files\National Instruments\NI-DAQ\fpgafiles\mionetwork\ni9163)

  

  After the start of the update, you will look at a window of the scrollbar for a minute or two. Then, the device will be auotmatically reboot. You may need to reconfigure your settings after the update.

  Regarding the deletion/time that you did. You should not. After you have configured the wireless, you should see an IP address in MAX on the wireless tab. If she is not there, click "Refresh" now you can pull the Ethernet cable and continue to use the device. (If you want to convince yourself, click on the "Refresh" button again and you will see that the "Link Status" for the "Wired" connection is "down".)

  I hope this helps. Let us know what happens. Thank you

• Unable to connect to the broadcast of radio stations

  I use Windows Vista.  When I go on stations WAMU and only ONE line, if I click on listen with Windows Media Player, I get a message that says: unable to connect to the internet. If I click on another format, I receive a message to install Real Player to the Radio, but I is installed.  I checked the firewall and can find no evidence that the programs are blocked.  With my old XP computer, I had no problem streaming radio connection.

  Hello

  • You use Internet Explorer to the streaming radio station?

  If so, you can follow the link described which may help you to solve your problem:

  How to optimize Internet Explorer

  http://support.Microsoft.com/default.aspx/KB/936213

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Unable to connect via wireless with SSID broadcast disabled

  I want to configure my router for my SSID is not broadcast, because I think it's a logical step to take for increased security. I have not been able to do since I started using my new laptop Inspiron 5558. I tried this several times and every time I turn off the SSID broadcast, I am not able to connect to the Wi - Fi on this laptop. Other remote computers in my house and my smartphone connect without problem, but nothing I've tried helps my new computer Dell laptop to connect via Wi - Fi, except for allowing the SSID broadcast.

  I have a router Actiontec MI424WR reverend E. I have installed the new driver and the Intel PROset utility and unfortunately nothing has changed. I went to the settings to investigate some of the other solutions offers, and I came across something that seems to have solved my problem. What I found in SETTINGS/network & Internet/change adapter options/Wi-Fi/see the status of my properties of connection/Wireless / on the connection tab, it was an uncontrolled area with the words "connect even if the network is not broadcasting its name (SSID). I checked this box, and since then, I was able to connect to my network wireless with SSID broadcast disabled. I will now call this resolved and if no new problems arise. start a new post. Thanks for sticking with me on this.

  Ed J.

• Unable to connect to 127.0.0.1 LAN network problems

  Hello everyone

  I have a few problems on my LAN to my mac pro book. I try to connect to the LAN servers on various different pieces of software running on different machines, but my mac does not collect and connect to external servers on 127.0.0.1.

  I have the suspicion that it might be something to do with my connection to localhost. I can't connect to 127.0.0.1 when I use 'Ping 127.0.0.1' or 'Ping Localhost', it returns nothing.

  Additional information;
  I can connect to the internet fine.

  I have a default hosts file

  I disabled my firewall and my little snitch program

  I use a Mac book pro on OSX Mavericks 10.9.2

  Here are a few commands that I found other threads of support that might be useful in diagnosing the problem.

  Dig localhost

  ; <> <> 9.8.3 - P1 diG <> <> localhost
  ;; global options: + cmd
  ;; The answer:
  ;; -> > Header < <-opcode: QUERY, status: NOERROR, id: 11015
  ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0

  ;; QUESTION SECTION:
  ; localhost. A

  ;; SECTION OF THE ANSWER:
  localhost. 0 A 127.0.0.1

  ;; Query time: 3ms
  ;; SERVER: 192.168.1.1 (192.168.1.1) #53
  ;; WHEN: Thursday May 19 22:48:02-2016

  ;; MSG SIZE rcvd: 43

  ifconfig

  lo0: flags = 8149 < UP LOOPBACK running PROMISC, MULTICAST > mtu 16384
  options = 3 < RXCSUM, TXCSUM >
  inet6: 1 prefixlen 128
  INET 127.0.0.1 netmask 0xff000000
  inet6 fe80::1% lo0 prefixlen 64 scopeid 0x1
  ND6 options = 1 < PERFORMNUD >
  gif0: flags = 8010 < POINTOPOINT, MULTICAST > mtu 1280
  stf0: flags = 0 <>mtu 1280
  en0: flags = 8863 < UP, BROADCAST, SMART, RUNNING, SIMPLEX, MULTICAST > mtu 1500
  options = 10 b < TXCSUM, VLAN_HWTAGGING, RXCSUM, AV >
  ether a8:20:66:48:03:bd
  ND6 options = 1 < PERFORMNUD >
  Media: AutoSelect (none)
  status: inactive
  EN1: flags = 8863 < UP, BROADCAST, SMART, RUNNING, SIMPLEX, MULTICAST > mtu 1500
  ether 5 c: 96: 9 d: 82:39:93
  inet6 fe80::5e96:9dff:fe82:3993% en1 prefixlen 64 scopeid 0x5
  INET 192.168.1.156 netmask 0xffffff00 broadcast 192.168.1.255
  ND6 options = 1 < PERFORMNUD >
  Media: AutoSelect
  status: Active
  EN2: flags = 8963 < UP, BROADCAST, SMART, RUNNING PROMISC, SIMPLEX, MULTICAST > mtu 1500
  options = 60 < TSO4, TSO6 >
  ether d2:00:11:e3:c2:80
  Media: AutoSelect < full duplex >
  status: inactive
  fw0: flags = 8863 < UP, BROADCAST, SMART, RUNNING, SIMPLEX, MULTICAST > mtu 4078
  LLADDR 10:dd: b1: ff: fe:1e:3 c: 28
  ND6 options = 1 < PERFORMNUD >
  Media: AutoSelect < full duplex >
  status: inactive
  bridge0: flags = 8863 < UP, BROADCAST, SMART, RUNNING, SIMPLEX, MULTICAST > mtu 1500
  options = 63 < TXCSUM, TSO4, RXCSUM, TSO6 >
  ether aa:20:66:84:8 d: 00
  Configuration:
  0:0:0:0:0:0 priority 0 0 fwddelay hellotime ID 0
  maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
  port root id 0:0:0:0:0:0 priority 0 ifcost 0 0
  IPFilter disabled flags 0 x 2
  Member: en2 flags = 3 < LEARNING, DISCOVER >
  ifmaxaddr 6 priority path cost 0 0 0 port
  ND6 options = 1 < PERFORMNUD >
  Media: < type unknown >
  status: inactive
  P2P0: flags = 8843 < SQUARE, RELEASE, running, SIMPLEX, MULTICAST > mtu 2304
  ether 0e:96:9 d: 82:39:93
  Media: AutoSelect

  status: inactive

  PS there is no information in this code that people could use for malicious attacks is there and if it doesn't there could you be kind enough to let me know?

  Thank you

  A

  The IP address 127.0.0.1 is localhost. In other words, incoming 127.0.0.1 point to the computer you are on. https://en.Wikipedia.org/wiki/localhost

  It has nothing to do with the connection with servers on your local network.

• Unable to start an iMac using a USB Installer key 10.11

  I have a late 2012 27 "iMac with Fusion (128 GB + 1 TB) disk.

  The HD went down a few days ago. So I bought a new one (WD 1 TB) + OWC install kit with HD temperature sensor. I followed the HoTo given by OWC, which makes it easy to change the HD.

  The iMac was active with FireVault 10.11.2. When the HD has stopped working, the computer was still able to boot the boot sequence, with the system installed on the SSD, but unable to come to the session window (gray screen with the signal 'no parking').

  When you install the new HD, I still have half of a running system, which is not enough event to run the utility application at first.

  Then, I prepared my USB 10.11 installation key (thanks to DiskMaker), but was able to start the computer with it: the boot sequence was broadcasting until the end of the progress bar, while the iMac restarts, but instead of the installation of the app, he took over a new full boot sequence. And once again. And once again.

  Here are the tips I've tried so far:

  -Boot from USB install key,

  -Boot from an old Yosemite install key,

  -Boot from network (ALT-cmd-R to start).

  -Run 10.11 from a USB key,

  -Start mode single to try to launch a diskutil command, but when it worked, he refused to use this command ("unbleto use of the DiskManagementframework'),

  - And of course, many ALT-cmd-p-r as well.

  I could once come to the installation of the app (10.11) and took the opportunity to erase the SSD, but then the iMac froze. I was able to come later once again soft installation and launch a shell terminal in an attempt to recreate the fuser unit, but it froze again to about 30% of the FD creation.

  Now, the iMac seems to be caught in the trap in a loop of departure and refuses to come to any kind of usable process. I can't even verify the firmware version (but he was already on El Cap, so it shouldn't be the issue). When in single - or - verbose mode, I got some strange lines that say:

  -' previousshutdown cause:-128.

  -' endpointhas been activated through legacy launch (3) API. " "Pleaseswith in XPCnor () bootstrap_check_in: com.apple.ReportCrash.DirectoryService ' or

  -' endpointhas been activated through legacy launch (3) API. " «Please swith to XPCnor bootstrap_check_in(): com.apple.ReportCarsh.dirhelper»

  The reboot occurs just after a last (actually, about 1 minutes after the line appears).

  I'm really upsetnot to be able to simply install El Capitan on my computer after changerthe HD, which I consider a base operation.

  FIXED!

  Long story short: NEVER change the hard drive AND add little RAM of the computer at the same time! I bought 16GbofRAM that I put in the Mac at the same time that I was changing the HD, and it seems that, of which prevented the computer to function properly.

  I suddenly thought that could have some interference and decided to try after removing these 2 pieces or memory. And it worked correctly.

  I could then launch a shell terminal to create the fusion drive, and I have now a new El Capitan, which is waiting for my Time Machine data to restore :-)

• PSC disconnected in MAX but meets the UDP broadcasts

  Hey guys,.

  I have 4 controllers of PCP in the control of a whole bunch of sensors on the ground. Each sensor has its own calibration, and so I built an OO hierarchy based on dynamic distribution to cope. Now, there is a piece of generic software and 4 controllers use to perform their tasks (acquisition and newspaper). The first large work three controllers and run everyday, the fourth died within an hour of running. It's the exact same architecture and the code on the controllers.

  I have a thread separate from the network that sends data to the device via a UDP port health - it it broadcasts to the network (CPU utilization, Uptime, HARD disk space). For the fourth controller, I will notice you after an hour it is disconnected to the MAX, I can't FTP in there, I can't connect through the LabVIEW project, BUT this wireless network is still alive and broadcast on the network.

  Can someone answer the following two questions?

  (1) in regard to being active - broadcast signal why is this exactly? I can't move on through MAX or the FTP server...
  (2) regarding the crash of the fourth controller-> the fourth controller has some complex calculations where he tries to determine the root of a polynomial. The NI_AALPro of the Toolkit OR serves that and is quite heavy. There's even a call to the DLL. I have a suspicion that these VI is originally the RT controller to plant. I'll check tomorrow by turning off in the code, but someone at - it does this kind of thing before and are having problems?

  Thank you!

  Hey guys,.

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Add WRT54G: second router / access point, unable to get to the outside network.

  Here is the prob:

  We just got cable internet the other day and the cable operator insisted on using their v1000 Belkin F5D7234-4 instead of my WRT54G V8. So I thought I'd use the WRT54G as a second router/AP (without wireless/LAN/WAN). I was eager to do this by running an ethernet in the WAN on the WRT54G port and plug it into the port of the client on the Belkin, place the wrt - 54 G at the other end of the House and have the WRT54G broadcasting the same SSID and require authentication even as the Belkin and use the Belkin to Linksys Wireless Bridge. In this way, it will extend my wireless network and all computers can access the internet and the other (wireline customers will keep at wire-speed, wireless is not authicate to two different networks.)

  I can't get the Linksys network based able to see all the other computers outside the WRT - 54 G, even for wireless clients. On the side of things Belkin network, I can't ping the router even if she pulls a DHCP in the Belkin address. All customers the Belkin side can meet and thin internet. I've fiddled with the WRT54-g for almost an entire weekend now with no result. The WRT54G can see the other router as a DNS as well as external DNS providers, but none of the client computers can. Basically, I'm wanting to extend the network of Belkin 4 as most cable customers and fill a few dead wireless, and make the visible computer on the same network of suggestions?

  Parameters of WRT - 54G:

  Automatic configuration - DHCP

  Same domain name like Belkin
  IP router set a tire to the DHCP server

  DHCPserver OFF

  Mode of operation: router

  Safe are disabled.

  Wireless SSID is the same as Belkin

  Wireless channel is the same as belkin.

  Method and auth. key is the same as belkin.

  Belkin:

  DHCP is on.

  15 IP addresses available.

  Wireless gateway is on with the WRT54G Wireless MAC address information.

  Ethernet cords are connected.

  I played with static routes for hours, tried the option routing dynamic, even tried DMZing of the WRT54G intellectual property in the belkin and still unable to connect to the internet. Tried the Belkin MAC address cloning. Nothing seems to work. When I plug the WRT - 54G directly in my digital/Modem/phone cable box, I get internet and everything. I'm at the point of throwing same DD - WRT on it.

  But beyond connection "wireless" I discovered really does not work if well (drops random wireless speeds seize up) with two different pieces of equipment running two different firmwares. So the thing connecting wireless set was out the window.

  I however knew what I had to do Linksys firmware:

  1.) DHCP clients forward.

  Customers of Belkin - network

  Linksys customers - network B

  The dhcp pool was not get transferred to the client computers. That is the 1-2 on network computer had XXX. XXX.100 - 102 for 3-4 computers on network B was YYY. YYY. YYY statically set by Windows. Even after changing to a static address on the network A dhcp scope I could still connect to the internet or to one of the computers on the network.

  The static routing table seemed not lead me anywhere either, and I've tried dozens of configurations.

  The way I got it Setup is with the customer enthernet of the Belkin ROUTER to THE Internet on the Linksys WRT54G port 1-4. Maybe I should have plugged the ethernet on the client side of 4 ports Linksys?

  Anyway DD - WRT redirect DCHP feature was what I need.

  Regarding the scenario wireless two routers have the same encryption method and key but different channels and ssid. Who, with DD - WRT for some reason when I jump on the wireless-B, Vista will be ID it as network A (B).

  I hope that it has not violated anything except the guarantee which was anyway. The reason for which I needed for my network up this way is because I do a lot of work using VM (of various operating systems), is simply easier to have two separate semi networks. (to different physical locations in the House)

• WRT160N - unable to connect devices

  I just got my WRT160N today. I work with computer almost every day and configure routers pulling from time to time, I went and configured properly. Well, the laptop which is connected physically can access the internet, which means that the router is connected correctly with the modem and its all good. I go to with my printer, mobile, wii and laptop wireless connection... all 4 say they cannot connect to the access point. I broadcast the SSID, and it shows. I put it with WPA2 and we tried both AES and TKIP/AES. I have triple checked my password, SSID, type, all encryption. So I gave up and I ran the CD it came with, in the hope that will fix it... Nope... Even after launching the CD, I am still unable to connect my wireless devices. Does anyone else have this problem and know how I can fix this?

  OK, so I just spent 3 hours trying to get this up and running. I chose mixed-BG because that's what all my devices are. When I do this, the width of the 'channel' affects only 20 MHz. Apparently, that was my problem... You can change not 20 once you have selected the BG as mixed mode. So 3 hours later, I change to mixed, which is BGN, and then I was able to choose auto 20/40 for the width of the channel. Low and behold, now my stuff can connect. What he's joking kind of this, guys? Please release an update of the firmware or something that will solve this problem. Now, I have to get up to 5 hours of work, and I'll probably be in a bad mood all day. Thank you!

  (Mod Note: under the guidance of the compliance of the directive.)

• Currently unable to resolve «Change not allowed to Windows...» "Message.

  We need help please.  We have been plagued by the following message will appear: "an unauthorized change was made to windows.  Windows found a change which will result in limited Windows functionality... '

  Recently, I reformatted Dell computer laptop my wife that is running Windows Vista Home Premium OEMAct.  I accidentally used the info from the cover of in that disc Vista came rather than the actual key of the sticker located under the machine.  We started the message above and have been unable to solve this problem.  I have updated the key with the correct data information.  (The key correct is contained in the report).  I also tried Vista activation via the Microsoft phone line that seems to succeed.  However, the problem persists.  I copied the results of the WGA Diagnostic tool below.  Any help would be greatly appreciated that we are ready to launch the * $% ^ cell # out the window!

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: genuine

  Validation code: 0

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - XPC37 - 4RR3P-YWH9M

  Windows product key hash: 78kqB47wlQFyi2iS2FzKrBI9V6U =

  Windows product ID: 89578-OEM-7215742-49704

  Windows product ID type: 8

  Windows license type: COA SLP

  The Windows OS version: 6.0.6000.2.00010300.0.0.003

  ID: {4EA37F88-761F-4994-B88C-8904F8EF624E} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows Vista (TM) Home Premium

  Architecture: 0x00000000

  Build lab: 6000.vista_gdr.100218 - 0019

  TTS Error: K:20111029102407640 - M:20111102185442122 -.

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 100 authentic

  Microsoft Office Home and Student 2007-100 authentic

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)

  Default browser: C:\Program may Explorer\iexplore.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {4EA37F88-761F-4994-B88C-8904F8EF624E}1.9.0027.06.0.6000.2.00010300.0.0.003x 32*-*-*-*-YWH9M89578-OEM-7215742-497048S-1-5-21-2608997218-212940069-3830413687Dell Inc.. MP061                           Dell Inc.. A08 20070402000000.000000 + 000EC303507018400FA04090409US Mountain Standard Time(GMT-07:00)03DELL M07 100100Microsoft Office home and Student 20071250DC58A525875AEyU8iUc/xndCms/Dd/OyfZnyiM4E =81602-OEM-6872775-540294

  Spsys.log Content: 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 + / / 4hWdo7Xkl9D + + / + UkjWe / vscLdhTl7hrWaOSPNeFyr3ibjxx4moY4 + 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 GpCVo60xZnYqNxuDG7GXSRQZeiA/Gej4MzhN6aSh4VagsJL2g8wUu0UX / NNfofjLExZEZSdmQI0QIgzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx + w3WNaAwzkNYn29bLc66sfsN1jWgM

  License data-->

  The software licensing service version: 6.0.6000.16509

  Name: Windows Vista, HomePremium edition

  Description: operating system Windows - Vista, channel OEM_COA_SLP

  Activation ID: a4eec485-e375-48b4-8f51-80d13a4086b6

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 89578-00144-157-449704-02-1033-6000.0000-2842011

  Installation ID: 001424017382583576838195532400749922302385476842306841

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203

  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204

  Partial product key: YWH9M

  License status: licensed

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current HWID of Hash: OAAAAAEABQABAAEAAQABAAAAAwABAAEAJJQA4e4ciP7iMDywTp7qTo6C/tny9KjH plus Lv0pqxWKoU

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC                                    DELL                       M07

  FACP                                   DELL                       M07

  HPET                                    DELL                       M07

  BOOT                                  DELL                       M07

  MCFG                                 DELL                       M07

  SLIC                                      DELL                       M07

  SSDT PmRef CpuPm

  That's all just because similar issues were held with Avast area this year - and the suspicion was that Avast may have paralyzed himself at the same time as crippling Windows.

  You may have updated RTM - but you still need to install SP1, SP2 and subsequent updates.

  Usually the AV is uninstalled, then update WIndows completely, then reinstall the AV has solved the problem - you can check by looking at the error line TTS to see where it was detected last (unfortunately, there is no way that I know to reset it easily). I suggest that do you so immediately after the uninstallation of the AV and before you reinstall and once again on the second boot after the relocation and upgrading of the AV. - compare values

  Look here for some of the many messages about this problem with Avast-

  http://social.Microsoft.com/forums/en-us/genuinevista/threads

• Vista is unable to clean install on Gateway Laptop

  Midway through the installation process, the error message says that it cannot find the files needed.

  Disc is clean, no scratches and has been used before for a clean install of Vista successfully.  using the external DVD drive.

  created the startup key file on the USB stick 4 GB transfer - always get error even come on the attempt to clean install.

  problem with the system is that .msi place all the files in the installation program and disappeared.  Impossible to uninstall or reinstall any microsoft office 2007 or live broadcasts.   all the icons disappeared, and same MS security essentials cannot uninstall or reinstall.  found settings changed to exclude an external drive and erase all programming suspicious without telling me.

  a restore during initial problems just made it worse and had to wipe the external drive.

  must be able to clean installation of Vista, but the installer is apparently what is messed up.

  Help?

  is OS provided with the machine and disk drive recovery gateway... but all the vista.  It DOES NOT install any other gateway programs included on laptop, and purely a vista installation DVD.

  and used the front disc to install, w/no of problems.  error message indicates the installation is unable to locate the files needed and made it to halfway through step 2.  said to check the 'vista compatibility.  who do not know because machine has run vista since its birth.

  Gateway tries just to sell time tech and renovation... Please no more links.  KNOW that gateway to acer and almost and no longer in the game.  don't care... always the problem of microsoft, and IF they are not concerned with a copy validates their OS prevented install... so guess that means we should start writing our own OS programs!

  Your license of Vista is an OEM license.

  ANY support for your license of Vista OEM comes from the manufacturer of your computer, NOT from Microsoft.

  And it's not Microsoft.
  These are public Forums, hosted by Microsoft.

  We are colleagues help Vista users to give FREE in our own SPARE time.

  I repeat my advice.
  It's you if you want to use, or not:

  http://support.gateway.com/support/default.aspx

  For any problem with gateway recovery software/process, contact Gateway.

  Mick Murphy - Microsoft partner

• Unable to connect to network WPA2 with Windows 7 64-bit (Intel 4965 and Cisco WUSB600N)

  Connect to a WPA2 network seems to be a fairly common problem.  Again, I can't be able to find a solution.

  OS: Windows 7 Ultimate 64-bit

  Wireless adapter (s): Intel 4965AGN (integrated into Dell XPSM1330) and Cisco/Linksys WUSB600N

  Drivers: latest windows 7 64 bit drivers from the two websites of companies.  Intel (v12.4.1.4), Linksys (3.0.10.0)

  Network properties: WPA2 enterprise, encryption of the ACS, authentication EAP - P, several types of routers around the world

  History: has been able to use the same laptop with Vista32 on this network without any problem

  I can not connect to networks non - WPA WPA networks simply not.

  When you try to connect to my companies WPA2 network (at any of our locations around the world).

  Method #1:

  1. Select "Other network" in the list of network
  2. Enter the SSID of the network
  3. Windows could not connect to the SSID
  Method #2
  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID, as WPA2-Enterprise security type, type of encryption like AES, check the boxes to connect automatically and connect even if the network is not broadcasting
  6. An unexpected error has occurred

  Method #3: Try to trick windows

  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID but select an open network
  6. Adds the network
  7. Then try to change properties
  8. WPA2-Enterprise security type
  9. Set to AES encryption type
  10. "Choose a network authentication method:" drop-down menu is empty!
  11. Windows has encountered an error saving the wireless profile.  Specific error: the profile has an invalid length field.

  I'm pretty desperate for a solution.

  Kind regards

  John

  There are a few people with Win7 x 64 that cannot connect to WPA2 P/EAP Corporate/business networks and no solution?

  Come on, guys, it's the microsoft answers site! someone give me something! I have two asus laptops, both with network cards Intel having this problem on two networks separate enterprise (school).

  Edit:

  RESOLVED:

  Here's the thread of the resolution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-company-wireless-network/3bcd12b1-A0D8-4357-bded-07da96259920?page=3

  The problem occurs when you perform a Wizard for easy transfer to a computer that was Symantec Endpoint Protection installed to one without him.

  Answer, copypasted:

  Inspect the key mentioned above - that is of HKLM\System\CurrentControlSet\services\RasMan\PPP\EAP.

  In each of the number keys look something like ConfigPathBackup and its corresponding ConfigPath - there are a number of them.

  For each, I deleted the original key (e.g., ConfigPath) and restored the original by renaming ConfigPathBackup to ConfigPath

  For each of them, the State is now restored to her pre State Symantec - each key pointed to a Symantec location that is no longer present and by restoring the path key backs up everything was fine

• WLC and syslog broadcast of AP

  Hello

  my parser wlc keep letting me know on syslog messages in the dissemination of my APs.

  How can I solve this problem?

  Thank you

  Johnny

  by default, the towers send log info to the broadcast address 255.255.255.255. You must set this to your syslog server, so it can be monodiffusees.

  config ap syslog host global 1.2.3.4
  
  
  otherwise your LAP-network will be flooded with broadcasts if something weird happens.
  See also 'Wireless LAN Controller (WLC) Configuration Best Practices' for more details on this suspicion and other things that may be 'set '.