Unable to turn on network discovery option in windows 7

Similar Questions

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Cannot turn on network discovery. I get the message "specified service does not exist as an installed service.

  Suddenly, something has changed in my computer and now I can't turn on network discovery. Every time I try, I get message "the specified service does not exist as an installed service. I get the same message for others e.g. file sharing and printer sharing. Changes the most recent have been updated to McAfee a few days ago. But the network worked well until last night.

  Hello

  What is the brand and model of your computer?

  Method 1:
  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  a. Click Start, type firewall and then click Windows Firewall with advanced security.
  b. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP-) in the list.
  c. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  d. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click the service computer browser and TCP/IP NetBios support.
  c. change the startup type to automatic and start the service.
  d. apply the changes.

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  I hope this helps.

• When I turn on network discovery, it does not record. What can I do to get this action to save?

  I have a new blu - ray DVD player which I am trying to connect, so I can stream from my computer.

  Hi Ron,

  Check out these links and follow the steps.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-in/Windows7/enable-or-disable-network-discovery

  What is network discovery?

  http://Windows.Microsoft.com/en-in/Windows7/what-is-network-discovery

  Let me know if this helped

• Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

  original title: cannot start service autoconfiguration WLAN and EAP services

  I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

  I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

  I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

  When I tried to start the WLAN auto configuration service, I get the following error...
       Windows could not start the service WLAN autoconfiguration on Local computer.
       Error 1068: The dependency service or group could start.

  When I tried to start the service of Extensible Authentication Protocol, I get this error...
       Windows could not start the service on Local computer Extensible Authentication Protocol.
       Error 1053: The service did not demand launch or timely control.

  I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

  I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

  Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

  This link has the solution that worked for me.

• Unable to turn off the built-in in Windows 7 Home Premium Administrator account

  I can't disable the built-in Windows 7 Administrator account. I tried to do it via a command prompt with "net user administrator / active: No. ' but all this, after the reboot, is display an error message about the incorrect user name or password and presents the administrator account as an option to login anyway (with an option for"other users"). But if I try to connect to the administrator account a password for log-in, which I did not.
  If I activate the account (again in elevated command prompt), I can connect as administrator normally, without password.
  I can always connect to my own account without worrying, but I would like to know how to solve this problem in any case. Can I avoid the error by removing the password from my account, but I don't want to do that.

  I created a test account Admin attempt to connect to it gives this error:

  "The service user profile Service has no logon.

  User profile cannot be loaded. »

  Ah, the dreaded problem of profile Service. I've seen dozens of times in this forum, but I have no solution for it. If you do a search on Google you will find countless references to it. I invite you to solve this problem first, before you disable administrator accounts.

• Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

  When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

  Hello MarkPogue,

  Thank you for the question!

  I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• I am unable to stream music to Xbox because the network discovery is disabled.

  Hello.

  We just got a new Xbox and I want to listen to my music to it.  Before asking that my Os is Vista Home Basic 64-bit SP 2 with all the updated.

  Antivirus is Microsoft Security Essentials

  Firewall is Windows Firewall - on, but default settings open the port for the client to the transmission

  The problem seems to be that the computer browser service does not start

  It is configured to start automatically.  Regstry settings show that this is supposed to start.  (MaintainServerList Yes)

  Server, Workstation, and RPC can also be programmed to automatically start.  They do not start.

  I would try to start it in safe mode, but the server does not start in safe mode. For the computer browser does not either.

  When I try to start the discovery of the network, I click Yes and it confirms that I am an administrator.  Refreshes the window and he came off.

  The strange thing is that if I look at the map of the network, I can see the Xbox and our laptop.  But in network, it asks me to turn on network discovery and file sharing.

  I tried to start the service with

  net start "computer browser".

  It was not an error.

  I really don't know what else to try.

  sfc/scannow

  found errors and fixed them.

  Original title: impossible to listen to the music to Xbox because that network discovery is disabled because the computer browser Service does not start

  Hi Ryan,

  Thanks for keeping us posted and share this information with us.

  I would like you to contact XBOX support for help. Your question would be more out there.

  Check out the link-

  http://support.Xbox.com/en-us/

  You can also post your request in the Xbox Forums as well.

  Check out the link-

  http://forums.Xbox.com/xbox_forums/b/default.aspx

  Get back to us if you have other Windows-related issues. We will be happy to help you.

  Thank you.

• Network discovery cannot be activated, windows 7 Home premium.

  This problem is very simple to describe, but I do have a lot of time I can't find a solution. Help appreciated.

  In the network and sharing Center, advanced screen sharing, there is the option to turn on network discovery and file/printer sharing.

  When I put one or both these on 'on' and click on 'save changes', the screen closes without guest or delay. If I open the screen again two options are always on 'off '.

  I checked that the services concerned (DNS Client, Function Discovery Resource Publication, discovery SSDP and UPnP device host) are started and they are.

  Tried to reboot, windows update.
  Network troubleshooting is, as always, useless.

  I suspect that maybe some third party software plays a role here. I checked for malware and removing applications with a network component.

  This is probably related. I get an error 0 x 00000001, when I try and share a local printer.

  Manager tasks shows a two process named csrss.exe running, 936 kb, the other is 6532 KB. A matter of concern?

  All the machines in my LAN on the same workgroup. Not in a homegroup.
  Advice appreciated!

  Complete required wipe problem and re - install to correct.
  End.

• I need help, its frustrating me! network discovery does not illuminate.

  my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.

  Hello

  Did you change your computer?

  Method 1:

  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  1. click on start, type firewall and then click Windows Firewall with advanced security.
  2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
  3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  4. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
  3. change the startup type to automatic and start the service.
  4. apply the changes.

  Method 2:

  Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.

  Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.

  To turn on network discovery

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I also suggest you turn on discovery of the network link and check.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Network discovery and public networks

  I turned on "Network discovery" and he asked if I wanted it on public networks. Without thinking, I clicked OK and now I can not understand how to return a change it to private networks.

  Help.

  Click Customize and change your network to a public network.  Stop 'Discovery network' and then turn it on again. Boulder computer Maven
  Most Microsoft Valuable Professional

• network discovery is disabled warning

  How do you turn "network discovery is disabled" alert?

  I want discovery network to be powered off and would that warning stops appearing everytime I open the network window.
  PS, I know, ' why then do I need to open the network window.
  I just do.
  Thank you.

  Hi Tiripon,

  1. is that the computer is connected to a network?

  2 did you do changes on the computer before the show?

  You can check whether the associated network services are running

  a. click Start, type services.msc and press enter.

  b. in the list of services, double-click on ' function Discovery Provider Host ', change the Startup type to Automatic and Start the service.

  c. apply the changes.

  d. restart the computer and check if the problem persists.

  If the computer is connected to any kind of a network, then you can turn on network discovery, and check if the problem persists.

   

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Let us know if that helps.

• Network discovery does not 'on' when selected and recorded, all the answers?

  I have some very annoying problems with my new network set up.

  My network consists of a Belkin router type "n" (model F5D8236-4v2), the main PC with windows 7 32-bit OS, a wireless laptop XP, a machine of the PS3 and TV (model KDL 32EX403 =) Sony Bravia - hard wired to the router.

  I want movies stream from my PC to the TV. laptop and PS3.

  My PC (the principal server) see the laptop, TV, but not the PS3. He can see the files on the laptop and the laptop you will see the PC it cannot access any files or folders on the PC.

  The TV can not see the PC, laptop or PS3.so no films can be heard of these components on television.

  I tried everything that Microsoft and several forums have to offer, but to no avail.

  One thing I noticed when trying to find a configuration to mitigate the problem, it's that when you go to "Advanced sharing settings" and try to change the setting of 'Network discovery' on IT, and then save this setting, it is up to the STOP after trying to save.

  Please can someone help I'm quickly running out of hair to pull.

  Thank you

  Hello

  We will first try to turn on network discovery in Windows 7 for you to do:

  Go to: Control Panel---> Administrative---> Services-(search for SSDP DISCOVERY)---> right click Tools 'SSDP DISCOVERY'---> go to---> Set auto properties

  STEP 2: Control Panel---> administration tools---> Services-(search for the HOST of the UPNP DEVICE)---> right click 'HOST de UPNP DEVICE'---> go to---> Set auto properties

  You should be able to turn on network discovery

  Restart all of your devices, including your router.

  Let us know the progress

• network discovery, file sharing and public folder sharing won't turn on if the ethernet cable is removed and plugged

  Public folder of Windows Vista sharing problem.

  Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged. How can I prevent this from happening.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  It will be useful.

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.