under water camera problems

Similar Questions

• With the new updated my headphones stop working and I have to reboot to get back them on. Speakers continue to work. Looks like a fax under water.

  After downloading the new update, my helmet randomly began to lose the sound and I get this sounds like a fax under water machine and I do not have what I was listening to. I have to shut down my computer to do return normally, only to have to chance to do it again. The computer stops you can hear a popping sound. I went back to an earlier backup and have not installed the update for a day and it was working very well again. Then I installed the update again and a few hours that has started to happen again. I went back to the previous record and have not installed the update for the last 3 days and no problem. I would like to be able to install the update but not if it means losing her and having to close. I watch TV on my computer and it of a huge pain to get a film loaded only to stop because I can't hear it, then reload and maybe 20 minutes. or an hour later same thing. And it seems to be quite random when it happens.

  Hi carmenoshea,

  Thank you to contact our support, I'm sorry to hear that he had a problem with the audio after the recent update of version 27. Difficulty common audio and video questions

  I found an old bug with similar issues, but it is not the current version. For more information, what kind of video/audio you play when this happens?

  Please make sure that when you update all the plug ins are updated as well.

  • VLChttp://www.videolan.org/
  • Real Playerhttp://www.ehow.com/about_5558328_firefox-real-player-pr...

• Headphones as under water

  Hello

  I was listening to music through my headphones Walker today all of a sudden the sound changes and everything sounded as if I was under water. I tried different headphones, but they all have the same sound. Sound through the phone's speaker sounds good ok and the sound of the headset on my computer. A reboot didn't help, that's why I suspect the headphone jack. Is there anything else I can try, or do I have to send the phone in for repair?

  See you soon,.

  J

  Just did a restet of factory, and allowed to solve the problem!

• Hi cyberlink you cam problem...

  Hi team,

  could you please find my cyberlink you cam problem...

  Use HP Pav.N/B i5-2450 G6 1323 pure product... Windows 7 (64-bit)

  every time go to opening cyberlink cam show you like it under this same question do face from the last 6 months can you please show me the solution...

  cannot use SKYP also myself...

  Can you please find me solution ASAP...

  

  Hi Asra,

  Sorry, still no magic solution for this - instructions to 'fix' Windows 7 are not so different from those proposed in your first application.

  Possible software patches for webcam in Windows 7 are explained in this document:

  Webcam troubleshooting (Windows 7)

  If you have tried the Hard Reset, if you tried to reinstall your driver, if you tried to check the BIOS... then the webcam can be broken.

  Webcam of tiny and delicate wires break, crush or break away from the camera.  It is not so expensive to fix, but you cannot fix a broken webcam with software.  You will need to send (or take) the computer to have the webcam repair.  It's sad - it happens.

  One of my notebooks had a broken webcam and the laptop was new, too.  HP fixed the son, returned the laptop and everything was good after that.  So, is it broken wires for you?  Unknown;  There are a few software patches to pass and then you might consider, in fact, the webcam is broken.

  You can always take the laptop to a local repair shop and get a notice.  This isn't a real difficulty expensive even if it is the offending material.

  Good luck.

• iPhone camera problems 7 iOS 10.02

  iPhone 7 128 g, - camera problems. My phone was working fine until I updated to iOS 10.2... now I can't get my camera

  work on snapchat or my regular camera, it's just a black screen. If she decides to work it freezes. I tried to force reboot, power on & off, check the updates and nothing has worked. Anyone else having these issues and have any successful resolution?

  Same thing here! Any suggestions?

• My sound is that I'm under water

  When I watch 4oD the sound quality is terrible, it's that I'm under water. I'm on Windows Xp. Any ideas please?

  Thanks for your advice, I'm a bit dim when it comes to this sort of thing! I spoke with a friend who agrees with you, she comes to settle something called VLC here for me? She also advised me to do the program I want to look ready, ready to play and then pause while I go make a cup of tea! She told me that this will improve overall viewing for me... and he did! Thanks a lot again :)

• Do not use under water

  When has Sony changed their statement on the use of Xperia pruducts under water? They have the habit of saying up to 1.5 m deep for a few minutes, now it clearly states do not use under water.

  Also noticed that it's now the tips for previous products that said it was OK to use it under water, not only the last Z5.

  Products Sony are more airtight (what I thought anyway). Beware!

  Hi guys!

  Our new Xperia Z5 is protected from water infiltration to the IPx5 standard / x 8 which is the best protection of the water feature in mobile phones. The tests of this notation also includes slow submersion in water soft tank up to 1.5 m for a duration of 30 minutes. Move or operate the device while it is immersed is not tested during laboratory tests. There are also many environmental factors that we couldn't evaluate (e.g. movement or water pressure changes during movement), if a device is used under water. This is why we recommend not to overwhelm our Xperia Z5 in water.

• Web cam problem, using Skype... I can see other people, but they cannot see me...

  original title: web cam problem

  using Skype... I can see other people, but they cannot see me...

  Hello

  Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
  There is also information and on the Skype Forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  Also check with the manufacturer of the system, their drivers and documentation support online and ask
  their forums (if any).

  ============

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The listener should be closed before it can be used under water?

  For all I know, Xperia Z3 can be used while under water, all ports should be closed firmly. Is it includes the headphone jack? Because I didn't have the plug during the purchase. Or I have to buy the CAP separately?

  No, the headset jack his raincoat to the water

• Camera problems of Smartphones from blackBerry after 8100 Firmware update to v4.5

  Hi all

  It is a known issue for me that I'm updating all the handsets of our work with the Blackberry firmware for the company that I work.

  After updating the firmware on multiple handsets to the latest version of the Blackberry 8100 4.5, there is a problem with the camera.

  When you are in display mode and the outside (even if covered) the screen turns white as if the lens opening is open wide.

  Even when you take the picture, the result is white all over.

  Please see examples here:

  http://www.imagedump.com/index.cgi?pick=get&TP=540100

  and

  http://www.imagedump.com/index.cgi?pick=get&TP=540101

  Two of these photos were taken inside with just on fluorescent lights.

  However if I return to the firmware to a lower level the problem no longer exists.

  I tried to change the settings for the White Balance on the handset and no matter what setting I put it on the same results occure.

  I was wondering if there is a patch or I have to wait the next release for a bug fix?

  Thank you for your help in advance.

  Gadget

  Updated the 4.5.0.55 combined software and the camera problem no longer exists.

  Can I get some laurels to solve the problem myself? Laughing out loud

  Gadget

• Tracker camera taped permanently 'camera problems' indicates how much time left

  Tracker camera taped permanently 'camera problems' indicates how much time left

  It is for a 30 second clip shot with a DSLR hand, a little shake and some pan and works

  any ideas?

  Yes, the shots just won't solve. Try to prune the shot is shorter. 30 seconds is an eternity. I just cut a: 30 second TV spot which has 12 changes in action. The average length in a film shots went from 12 seconds in the 1930s to about 3 seconds today. A century of cinema data reveals how movies have changed

  The normal way to work on a camera track turned is to rough, cut to about the finite length of shooting more a few frames as the handles, and then make the camera tracking and insert your effects. If you really must track camera suddenly more than a few seconds, you will need to carefully plan and fire the shot, so the camera can be re-created. More so the more likely is that the software cannot be resolved for the camera. The more things that are moving down the less likely, is that you will get a good solution. For example, if you walk with a camera on a sidewalk in New York spent thirty seconds you probably will be able to solve for the camera, unless hide you all mobile people, then compose the shot until you try to solve it.

  A digital SLR that moves autour a little will also have rolling shutter problems and who gum up the shot. Blur fast movements also clogged the solution. There is no camera Tracker that can solve every time. Tracker of AE camera does a pretty good job with images carefully shot that has a lot of geometry sets in the scene when the lens used has very low distortion of the objective. Without seeing your shot, it's the best I can find. The chance whether the shot instead of a bug is very high.

• Sony Cam AS15 Action does not focus under water. How can I improve underwater video quality?

  The AS15 provides a very good quality video over water, but as soon as it is lowered underwater, it is not focused. The video quality is very bad, the images are totally blurred. It seems that it does not focus properly.

  How can we improve quality?

  
  

• 5s iPhone camera problems

  Hello

  My 5s iPhone camera does not seem to focus more. It is still used to work properly and there is not water damage or damage to my phone but it jut all stop suddenly focusing. No matter what picture I take now is fuzzy and its extremely irritating because the camera is a big reason, I have the phone. Is there a reason that this could happen? It might just not be the focus because I have tried auto focus and other things, but all my pictures are blurry just significantly. There are no scratches or anything on the lens of the camera because it can take clear pictures but if it's close enough as a foot or 2 later that it is not.

  Hello

  Keep your software up to date on your iPhone iOS can help prevent the problems you describe.

  Tap Settings > general > software update

  Lates iOS version available for your 5s is 9.3.4.

• Missing camera problem - cannot export (share options greyed out)

  I'm under El Capitan 10.11.3

  10.2.3 FCPX

  I7 MacBook retina (2012)

  8 GB RAM

  I worked on my calendar, creating several minutes of content.  In the background as well as media files import and transcoding, I noticed that all my stock options were grayed out.  I learned that I stumbled upon import of problems due to the lack of space on my external hard drive as they are for most of the 4K files.  I understand that when you work with 4K you can work, but you must wait until all transcoding of files before exporting a show.

  I also made the mistake to rename some of the clips in the bin case after being placed on the timeline (I think this might be part of my problem).

  This combination of import to a drive with enough space to allow the final transcoding with name change has created a lot of clips of CAMERA MISSING - so NO the ability to share.

  I bought a larger capacity drive and copied all the files in the new storage of 2 TB.

  One - I do an import/reimportation of camera/player.  (in some cases if it does not work - I am again an import - then try to link)

  I am finally able to exit then restart and see FCPX that my changes TAKE so I think I'm on the right track.  Sharing options are grayed out still, but I think that once all are properly reassociated on the timeline, I should be ok - right?

  Here are my questions:

  Why not see problems with my events (no yellow warning sign) everything seems fine - I can change but can not export?  Sharing options are still grayed out?

  Then if I stop/restart FCPX - all yellow and Red warnings lack of cameras back.  I thought I solved the problem, but sometimes getting rid of missing camera is a big chore.  I'm on the right track?

  Thank you very much for your help!

  It is important to allow the import of the whole process independently of the clips - not only 4 K resolution. And part of this process is transcoding if you choose optimize. So I think you're on the right track - you have files with incomplete optimized versions. Suggest that you select your clips in the browser, right-click > transcode media and create optimized media. Open the window of background tasks and monitor if transcoding is started and if it ends.

  Post back and let us know whether or not exporters continues to be a problem.

  Russ

• IPhone 6 more isight camera problem

  MY iphone 6 more isight camera didn't work no and if I claim for replacement at the apple store usa, and they give repair me iphone instead of replacement, but in fact even its not fixed. And after that, I just know the program apple isight iphone6 more for the device that is the serial number specific and side apple says "you enter the serial number is eligible for the program" on the Web site:-https://www.apple.com/in/support/iphone6plus-isightcamera/

  USA apple store didn't yet tell me on this type of program from apple for the iphone6 iSight webcam problem, and now im in India

  I want the replacement in India. im feeling as helpless

  Apple you do not respect their time and customers.

  Sorry, but options warranty and service for an iPhone are only valid within the country of purchase. It is one of the disadvantages if you buy an iPhone abroad.

  You will need to bring the phone to US in order to have that fixed.

  You can not send the phone to Apple, him ship abroad, but you can send it to someone you trust in the United States and ask them to process the claim under warranty.

  As we are users here, Apple is not reachable by posting here. To say Apple directly, feel free to use this link:

  Apple - iPhone - Feedback