Understanding the newspaper of the device: TXch & TXun

Similar Questions

• Works at a newspaper, finds it difficult to make a presentation made in Indesign and must be transformed into an app for Ipad / IOs.  This is the case in DPS consgigo generate the .ipa file put nsao install on the device, the message "installation."

  Works at a newspaper, finds it difficult to make a presentation made in Indesign and must be transformed into an app for Ipad / IOs.

  This is the case in DPS consgigo generate the .ipa file put nsao install on the device, the message 'installation' all the time.

  If I get the zip file and the XML of the person who generated the folios, as indicating that the DPS?

  Recognizing

  This happens when you try to install .ipa to a device that is not listed in the mobileprovision file. Make sure that the UDID of the device is included in your Developer Portal iTunes and when you generate the new file mobileprovision that you explicitly check the box next to the new feature that you added.

  Then download the new mobileprovision file and make sure that you use a new one, not the old, to get the app to the App Builder.

  Neil

• is there a way to remove the music draws in icloud or on the device?

  I'll be happy if everyone agreed with me on the use of apple's music. It's really too hard to remove a music of ios 10.  the new apple music wants users to play the song, then delete it; but by the old version, we could delete any song even we are not listening.

  shortly, I miss old versio of apple's music. because that have edit songs that you listen to the device was really easy.

  If any authorized person see this comment, please repeat aple music.

  Hi apoaktas,

  Welcome to the communities of Apple Support!

  Leave your post, we understand that you want to delete the music downloaded on your iPhone or your library, but the process is different than it was before iOS 10. The new process of removal of content is explained in the following article:

  Download music - iPhone

  Delete music stored on the iPhone. Touch and hold the song, album, playlist or clip. Tap on delete, and then click Delete downloads. The item is removed from the iPhone, but not icloud music library.

  See you soon!

• iPhone 6 cannot find the device bluetooth audio

  My iPhone 6 (IOS version 9.3.5) Impossible to find a new bluetooth device and keep the search bluetooth unanswered.  In addition, reception (when listening i-tune) is bad and intermittent.  Appreciate advice how to solve this problem.  Thank you.

  Hello ChengMY,

  Thank you for using communities of Apple Support.

  If I understand your message that your iPhone 6 (which is updated to iOS 9.3.5) cannot find a new Bluetooth device and don't stop looking for him. What type of device Bluetooth you are willing to pair with your iPhone? The reason why I ask, is that there are only some that the iPhone supports Bluetooth profiles. Here is a list of the supported Bluetooth profiles:

  iOS: supported Bluetooth profiles

  If the device you are using uses one of the supported Bluetooth profiles, the steps described in the following article can help solve the problem for you:

  Get help connection an accessory with your iPad, iPhone or iPod touch Bluetooth

  Best regards

• Whenever I want to open twitter "this connection is Untrusted"comes to the screen, but her option "I understand the risks" never comes. " What to do > help

  When I try to open the twitter/facebook etc, as sites the message that this connection is not approved appears on the screen. After some instructions another words in bold comes technical does not come from the details but "I understand the risks". What to do. Help step by step the pl

  Hi Linda, can you start at the top of this discussion and see if you can identify a particular program or a device that is intercepting your secure connections?

  If you want personal assistance, please start a new question and include your system information.

  https://support.Mozilla.org/questions/new/desktop/fix-problems

  Scroll down to the suggested items passed to continue entering in your question.

• Choose to restore the device on itunes or the device?

  I don't know where the box restore or update will appear!

  Please you can rewrite your question because I do not understand. You try to restore your iPad?

  Marco

  UPDATE: just saw the Summit. You forgot your password. Connect your iPad to your PC and then click on restore in iTunes. You may need to put your iPad into DFU mode well. To do that follow these steps:

  • Connect your device to your computer with a USB cable.
  • Turn off the device.
  • Hold the Power button for 3 seconds.
  • Hold the Home and Power buttons for 10 seconds.
  • Release the Power button but keep holding the Home button.
  • After that 15 seconds, you will be alerted by iTunes saying that it has detected a device in Recovery Mode.

• 'active zoom' notification when I turn on the device and change the settings

  Hey, I just bought an iPhone SE and there iOS 9.3.2,and the thing is that everytime I turn on my iPhone, this "active Zoom" appears, also when I'm in the application settings of the phone. I know that I have it turned on, I even use the use of the zoom, but this notification appeared even in the backyard lol...

  If I turn my phone off and turn it back on, after the apple logo, he says 'activé Zoom', and how I said, in the application settings when I change something, personal interpreter hostspot on and outside, the 'active zoom' appears, but not same zoom in French-. -.

  Hello Tomas.

  I understand wanting to use the zoom feature without the warning being on your screen all the time. Given that restarting your iPhone IS has not solved the problem, the next step that I recommend is to create a backup file and then reset all the settings.

  We have 2 ways to backup your iPhone. This link provides the steps for both options:

  How to back up your device using iCloud or iTunes

  Once you have backed up your iPhone, you can then reset all settings.

  Reset all the settings by clicking on settings > general > reset > reset all settings.

  Reset all settings are reloaded all the default settings. This is why you first want to create a backup file. This step will forget your Wi - Fi networks, remove any changes made to your Styles of alert notifications and disables Services sites for third-party applications. It also restores the sounds, brightness and wallpaper to original configurations, removes the battery usage statistics and shuts Siri. In addition, it turns off cellular data, disables the Wi - Fi sync, restores the Autolock to 1 minute and removes added international keyboards. All accessibility options will be turned off as well.

  This option does NOT delete anything like photos, contacts, music or applications. All content and media will remain after the device resets.

  Thank you for using communities of Apple Support.

• Satellite R630 - 130 missing Webcam from the device after Win7 Update Manager

  Computer laptop only 6 days in use. After that Windows 7 update integrated webcam just disappeared from the Device Manager and, as a result that does not work.

  System just can not find. New drivers did not help, as well the default BIOS setting. I even restored the system 6 days back - nothing like Web camera in the Device Manager.

  This problem is common on the Internet - but there is not a lot of information on Google.

  Any ideas?

  Hello

  I really wonder why the OS cannot recognize the webcam?  :|
  Generally, if the driver or the software is not installed, you should see an unknown device, but as I understand your message, even this unknown device is not visible.

  What to say try upgrading the BIOS, I read somewhere in the forum that the BIOS update can be useful in such a situation.
  If this is not enough, try the new OS installation (recovery of the laptop) and check if the webcam seems once again

• Add the device tab

  Hi Im trying to add a device via my iPad 2 on the connected hp page but the device or any other tab does not work. Any suggestions?

  Hello Newbie94,
  
  Welcome to the Forums of HP Support!

  I understand that you are unable to access the tabs of HPConnected via your iPad. It is a problem with the Safari browser, Apple with Safari computers with the same problem.

  To access the tabs of HPConnected I propose to install Google Chrome on your iPad and use this browser.

  Chrome - browser by Google< -.

  See you soon,.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Second Hard Drive not recognized / climb (but it IS listed in the Device Manager)

  I have a HP Compaq DC7800 convertible mini tower running than Win 7 Pro 64-bit

  I installed a second hard drive, and while I can see listed in the Device Manager, it is not mounted.

  That is to say, it is not in the computer > field at all.

  The second hard drive is a Hitachi HDT721032SLA360 ATA Device

  Under the hardware ID, it is said: IDE\DiskHitachi_HDT721032SLA360___ST2OA38E

  I thought it was a driver problem. Device Manager indicates that it uses the Microsoft 6.1.7600.16385 driver.

  I can't find a Hitachi driver for this player. My understanding was that this drive would NOT need drivers.

  I have it in the plug of P5 (I think it is P5, it's at the end of the cable with the primary hard drive) and I have a data cable sata from the sata port on the rear of the disc in the slot sata on the motherboard next to the slot in the place where the main in drive is plugged.

  The only sites that list the drivers for this drive are all spam (thanks, google) sites.

  What I have to change something in my Bios?

  Thanks in advance.

  If the drive is listed in the device but not 'computer' Manager, it must be mounted or a new volume must be created. Please see HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Do not understand the point of layout mode...

  I'm afraid it will make me look like an idiot, but... I just don't, so well, I'm missing something.

  Here's my situation: I have two USB MIDI devices connected to my computer, an edrum with 8 pads and a keyboard 25 keys, touch 16 and a bunch of buttons. Both devices allow me to completely configure the MIDI channel, note, the key pads, etc. and so on.

  So, ok, in my APPLICATION I plug just those, create a track for each instrument, I want to play, say each track to listen to a particular channel for a particular instrument, and I'm all set. The keys on the keyboard go to the channel where the synth plugin is listening, keyboard on another channel where a sampler is listening, and keys edrum go to a third channel where Superior Drummer is listening, etc. My edrums me has even let press a button to change between "kits", altering what channel/notes sends each pad, so I can load up, say, multiple instances of Superior Drummer and switch between them on the fly. Large.

  MainStage has much latency better than my DAW, so I'm trying to switch, but after searching around here, and by reading the manual (where the "Connecting MIDI instruments" section is literally just a diagram showing how to connect a MIDI cable and nothing else), I still feel stuck. It seems that I have to start by loading a concert (either drums or keyboards, but not two and no option for a clean slate), then shove a virtual representation of one of my instruments has not been included in the concert I have loaded and then link each individual pad notes not only a unit, not just a channel, but a specific (ditto the high/low notes on the keyboard).

  Why am associating notes with pictures of the pads when the whole point is that the notes are generated by the real thing?

  Why can't just say 'send some signals come from channel 1 device edrum to this plugin', and so on?

  Why am I spent the time to mount images of a keyboard and 24 portions on my screen (surprisingly difficult) when all I care gets ratings generated by a physical device to sounds generated by a plugin?

  Why this strange intermediaries?

  I know that mainstage is very well regarded by people who know more about this kind of things I do, so what I'm missing here? If I use the wrong tool for what I want to do, any suggestions for what I should try instead?

  Hello

  usernamenumber wrote:

  Why am associating notes with pictures of the pads when the whole point is that the notes are generated by the real thing?

  Why can't just say 'send some signals come from channel 1 device edrum to this plugin', and so on?

  Why am I spent the time to mount images of a keyboard and 24 portions on my screen (surprisingly difficult) when all I care gets ratings generated by a physical device to sounds generated by a plugin?

  If I understand the situation, all you really need to do is get rid of any control layout, you don't want, create the MIDI activity 2 monitors (1 for the keyboard, the other the drumpads), assign entries noon then label 2 devices for clarity.

  In edit mode, just do as you describe: assign one controls the activity of MIDI to a particular slice.

  TDC

• Is it possible to set the time on a device in real time so that the time will persist when the device is not powered?

  It seems that you can not set the time on a device sbRIO (9606) and have always the exact time when the card is powered after not being fed for a while.  I have a product which will be independent (not connected to a network) when it is supplied by the customer.  I would like to collect data in a datalog and would like to put a timestamp somewhere so that I can understand when these data were collected.  If I can't get an exact date/time, then the next best solution would be to set up my datalogs so that I can at least understand the exact order in which they were collected.  (I think I can understand it without much problem)    Any suggestions as to best practices?

  Hey John,

  Without connected VBat time will not be preserved between periods of closure. Unfortunately for the 9605 and 9606 we have not a way to date the connector 9693 VBat.

  How much sbRIOs you plan to deploy with your system?  9623 and 9626 have a compartment for the RTC. If you haven't bought your sbRIOs already you could focus on the options of the form always match.

  If it is necessary to have retention time between stops, we would need to understand the extent of your application more.

• Calibration error SMU-4141 niDCpower version 1.8, "calibration function is not supported by the device."

  Dear Sir.

  Nice to meet you.

  When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.

  It shows an error "function of calibration is not supported by the device." (false cae)

  But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)

  It will work.

  See attachments.

  My equipment list:

  Windows XP SP3

  LabVIEW 2011

  niDMM 3.0.5

  niDCpower 1.8

  PXI-1073 case with 2 cards.

  SLOT2: SMU-4141

  slot6: PXI-4071

  Could someone tell me the solution?

  Hi Peter,.

  The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device.  It is even for the Cal of NOR-DCPower function adjust a current measurement.

  You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.

  I'm not sure I understand your question very well.  Please let me know if I have not responded sufficiently.

• Trying to simulate the device USB-6366 (without success)

  I read through the tutorials DAQmx and MAX about the simulation of the device, but I can't yet find a way to effectively simulate the acquisition and generation of a signal using a device USB-OR-6366.

  I am a (given at the entrance of this VI) signal using DAQmx Write and then use DAQmx Read to read the signal captured from the internal memory of the card (which has a buffer of 32 MS). To do this, I created a task with DAQmx I feed in the writing block.

  I know that the approach is most likely wrong, but I can't understand not just how to do this in a simple way and documentation of NOR is anything but simple. All I want is to

  (a) test using 2 digital inputs to capture this signal by the device and then read what she has gained from its internal buffer

  (b) send the same signal to 2 digital outputs the signal output again.

  See you soon

  Yes! the simulation is designed to allow you to write a program and check that it works theoretically even if you do not have the material physically available. It has no interface programming to influence on the what the reading functions will return simulated data. And write the function has no notable effect anywhere, working as a receiver of data in nirvana. It is always useful because you can test software without getting all kinds of errors on the non existing hardware access attempt, but it has its limits, of course. However, a programming interface for manipulating that which and how the data are simulated, while it would be a very interesting feature, is almost certainly to complicated not only to implement but also to use.