Unidentified network Windows 8 Pro

Similar Questions

• Unidentified network - Windows 7

  Hello!

  recently re-installed Windows 7 after a BSOD that wouldn't let me even start. This issue is now resolved, but when I try to connect to a hotspot, it does not work. After a long "identification" process, he said "unidentified network, no internet Access. How can I solve that?

  Problem solved! The driver was designed for Windows 8, while the other more ancient works fine now.

• Unidentified network Windows 7 Ethernet or wireless work

  Question: Good so I have a computer that refuses to access the internet/local network. It just says: a Public unidentified network (which it isn't) other computers work fine ive tried to take it to a completely different network and tried to use a wireless card. No dice. Ive tried "netsh" orders, all the commands ipconfig. manual setting of the address of the network card in the advanced configuration of the network card. its an IBM all in a thinkcentre a70z and a realtek PCIe GBE adapter. Oh, I also tried the delete route 0.0.0.0, but it says that it cannot do. ive tried uninstalling the driver and put it back in place for the Web site as well as allowing windows 7 to install manually. ive tried to assign a static ip address. It drives me crazy. His car is not an address ip of the dhcp and ive manually adds the gateway address. any suggestions before I chuck this thing out the window?

  I don't have the service Hello or quicktime.

  I do not have a virus

  I deleted all of the antivirus

  I disabled IPv6

  It turns out that it was the motherboard and it had to be toggled with me.

• Networking Windows XP Pro and Windows 7 in a small business peer to peer.

  How can I access Windows XP Pro sp3 computer on the network peer-to-peer Windows 7 64 when it doesn't accept my password?

  Hello

  If I understand correctly, you are facing problem with networking in Windows 7 computer. I suggest to try the steps in the following link and check if it works.

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows
   
  If the steps did not help, then it would be better to post the same question in the Microsoft Technet forum by using furter.
  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Networking Windows 7 Pro 32-bit or 64 - bit

  My Windows 7 Pro 32 bit computer cannot access the computer of Windows 7 Pro 64 bit.  The convenience store said to ensure that the same router software is installed on both computers.  How can I check this?

  Hi Tom,

  According to the description provided that you are not able to connect to the 64-bit Windows 7 computer.

  Answering these questions that could help us to provide the best solution:

  1. What is the exact message displayed by the troubleshooter?

  2. what exactly happens when you try to connect to the 64-bit Windows 7 computer?

  3. how exactly you are trying to access the 64 bit Windows 7 computer?

  Visit this link and check:

  There are a number of reasons why you can't connect to other computers on your home network, or you can't share files and printers with them.

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Provide us with more information on the question for you more help.

• I want to limit the file sharing on a home network, Windows XP Pro (working group) to a specific user on a different computer.

  I can't get this username entered with success because I'm limited to only users on the computer, I'm trying.  I have Windows XP off file sharing simple.  Both computers running XP Pro and I can share the folder, but it is open to ALL.  Is there a way to do this?

  I would like to try to explain how it works.  You have XP Pro on Computer1 and you have disabled Simple file sharing.  It is a step in the right direction.  The facts are that the file exists on the computer 1 and is 1 computer to control what external connection gets access to this file.  Computer 1 can only validate combinations of username/password names he knows.  Is not in a domain, computer environment 1 includes only names of user and password that exists on the computer 1.  He cannot know or trust any combination of name of user and password that does not exist within itself.  The normal method, most people use is to create the same user on computer 1 that exists on the computer that connects and gives the same password that is used on the computer that connects to this user.  If this is the case, the external user connects seamlessly and have access if 1 computer gave this authorization to the user in this file.  Access can be controlled by right-clicking on the file or folder, select 'Properties' and then use the 'Security' tab to generate an access matrix.

  Authentication: When connecting to the computer 1 from another computer, computer 1 search first if the username on the computer connection exists on the computer 1.  If the user name of the user on the computer connection exists on computer 1 and passwords on both computers to match, the connection is established.  If the passwords do not match, the connection is refused.  If the user name of the logged in user does not match a user on computer 1, then the 'Guest' user is attempted.  If the guest user is not protected by a, then the user will resemble the user 'Guest' and 'Guest' appropriate access.  If the guest user is disabled on Computer1, and then the computer connection displays a name of User/Login screen asking the user to provide credentials (name and password) 1 computer can use and recognize to check that the user.  If a name of user and password recognizes that computer 1 is entered, then computer 1 authenticates the user with this credential.

  Of course, once authenticated, the user will have access to these files to which permissions have been granted to this user authenticated according to the KB307874.  XP cannot grant permissions to users, he knows not (obviously) beyond the 'Guest '.

  Bottom line is that you have discovered in a domain environment (workgroup), you MUST authenticate as a legitimate user who is (and who is not disabled) on Computer1.

  HTH,
  JW

• Windows 7 Pro - unidentified network domain PC connected Via Ethernet

  Hello - we have several machines Windows 7 is joined to our domain.  Recently when move us a PC from one place in the building to the other and connect them to wired ethernet, they get the 'unidentified network' and it shows as 'public '.  If plug back us them on their original network node, it works very well and finds the network, no problem.

  I did all the deforestation of the intellectual property, the command netsh, updated drivers, etc., but does not know what is happening.  Nothing has changed on the switches.  If I move a Windows XP computer, it works as expected.

  Thanks for your help!

  Hello jrennard3,

  Welcome to the Microsoft Community Forum.

  These computers are connected to the domain network, the question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums :

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you.

• Windows 7 indicates "unidentified network".

  Hi all

  We have a strange problem and I was wondering if anyone of you has a solution for it:

  We have about 60-70 PCs of Windows7 on a network of unique working group, all PC affect IP via DHCP addresses. Sometimes, some of the PC connection shows "unidentified network". We have tried to disable the Bonjour service as stated in some articles online, but nothing helped.

  Any advice is greatly appreciated! Thank you.

  Josiah Heng

  Hi Josiah,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Network connection between Windows 7 Pro and Windows XP Pro wireless

  Nice day.

  I am trying to connect to a Windows XP pro to a home wireless network, hosted by a pc Windows 7 Pro. I can see all the other PCs on the XP pc but cannot get them to connect. When I click the icon for the Windows 7 pc and try to log in (open) he asks a user name and password but I don't know what is the user name. I guess the password is generated by the computer windows 7, when I set up the homegroup. Would you please advise me on what to do to make this work. Thank you.

  Hi ArnBas,

  Looks like you are facing a problem with network computers. I came to find this documentation for you who speaks the networking of the various versions of the computers.

  Just through the same thing and check if everything is fine with the settings. Also, take a look at this very useful information.

  I hope this helps!

• Impossible to install the wireless network adapter TP-Link on Windows XP Pro error "insufficient system resources exist to complete the requested service"

  Hello

  OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallation
  I had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed.  First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.
  My PC specs:
  AMD Athlon (TM) II X 2 245
  2.95 GHz, 3.25 GB of RAM
  Windows XP Professional version 2002
  Service Pack3
  Thanks in advance.
  concerning
  gas

  T-Link support tried it yet?  http://www.TP-link.com/en/support/contact/

• Windows XP Pro SP3 slow navigation and performance of the Internet network

  I am running a Windows SBS 2008 domain with 70 clients - many of which are Windows 7 Pro (and not affected by performance problems) and other clients are Windows XP Pro.  Recently, apply 2 updates to all Windows XP clients to a problem of double authentication with RDP Server 2008 platform - two updates are http://support.microsoft.com/kb/969084 (install the RDC 7.0 client upgrade) and http://support.microsoft.com/kb/951608 (adds the registry entry in Windows XP to enable CredSSP).  Now, the patches of handsets allow RDP clients to Server 2008 platform and enter the credentials of the user only once.

  However, given that these updates have been applied, about 7 of 20 Windows XP clients are extremely slow performance when searching for network resources (sharing drives, Outlook / MS Exchange and Internet browsing synchronization).  Not sure if the 2 patches are coincedental or related.  I tried rewriting changes from two patches, drivers NETWORK card and even tried to replace the NETWORK adapter with new ones.  No change in performance.

  However, can I uninstall / reboot / reinstall the Client of Microsoft Networks and clients perform as expected.  Over time (sometimes), the problem reappears.  I have been through the event logs and don't see any errors that indicate a failure to communicate on the network.  All clients receive assignments IP from the DHCP server and updates are managed via WSUS.

  Ideas or recommendations would be greatly appreciated.

  Hello DCAggie,

  Because you are on an area of activity, please transfer this issue to the address provided below on the Microsoft TechNet forums.

  Windows XP IT Pro

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  Thank you

  James

• Windows 7 can not 'see' Windows XP Pro on network

  Hello. I'm trying to share files on a XP Pro SP3 system with a Windows7 machine. I can ping W7 from XP. I can't ping XP from W7. If I boot XP in safe mode with setting in network, everything works fine. See the following topics:

  Windows 7 Pro SP1 (W7)
         
  IP ADDRESS: a.b.c.d / 255.255.255.0
  GATEWAY: a.b.c.g
  WORKING GROUP: DBCPA
  NAME: Inspiron560

  Windows XP Pro SP3 (XP)
         
  IP ADDRESS: a.b.c.e / 255.255.255.0
  GATEWAY: a.b.c.g
  WORKING GROUP: DBCPA
  NAME: Powerspec

  (1) started normally XP:

  On XP: Ping successful a.b.c.d
  Ping successful inspiron560

  On W7: Ping Timeout a.b.c.e
  Powerspec ping Timeout

  (2) XP booted safe mode with networking (same user):

  On XP: Ping successful a.b.c.d
  Ping successful inspiron560

  On W7: Ping successful a.b.c.e
  Ping successful powerspec

  -Help!

  -Ken Hunt

  The problem is in Norton 360 on the XP box. Enabling the address IP of W7 being approved has solved the problem.

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• Cannot access computers running Windows XP Pro on wireless network.

  3 machines on the wireless network. 1 running Windows 7; 2 running Windows XP Pro.  Previously, I had full access in all directions. No problems.   Now I can't access Pro X machines. Neither the machine, Windows 7, or a XP Pro on the other machine. I can see XP machines in Windows Explorer with the complete display of all shared folders, but when I try to access a file, I get an error message. "\\Tiger\Documents and setting are not available. You might not have permission to use this network resource. Contact the administrator of this server to find the you have permissions to access. Not enough server storage is available to process this command. "(This is the message I get when I try to access one of the XP machines on the Windows 7 machine The message on a XP machine when I try to access the other XP is the same, except that the last sentence is "the network path is not found."  I CAN have full access to the Windows 7 machine is XP Pro machines. I checked the properties of sharing on both XP machines, and they seem to be the same when everything worked correctly. I have installed any new program - except the regular updates of Windows and the frequent update of the antivirus of Trend Micro. Any solution?

  Thanks Steven Winograd. I don't know how to frame a search that would have led me to the Article 177078, or that it applies to my problem, once I found it. I may have a new technique, but I CAN follow a recipe from Cookbook to change the IRPStackSize. Increase the value of 15 to 18 solves the problem without a further hiccup. Thanks again.

• How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

  How can I get my HP Color Lasejet 8550N to connect to the home network in Windows 7 Pro?

  Hello

  Based on this and that is not a printer ready network. Has a network card?
  Another thing, you need to consider: HP does NOT support Windows 7 (for her) so you have to get this first.

  Good luck.