Networking Windows 7 Pro 32-bit or 64 - bit

Similar Questions

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• Unsupported personality: PCL on print Laserjet 1012 from Windows 7 Pro 64-bit

  I have an HP Laserjet 1012.  My PC has Windows 7 Pro 64 bit.  I used the Laserjet 1015 PCL 6 drivers.  When I printed the first two times, it worked fine.  Now each page just print "Unsupported personality: PCL ' at the top.

  What should I do now?

  Thank you for your ' Experts for a day Tech Support.

  Mark

  Hi rbarbo43,

  I found the following thread that will help you during the installation of the printer in Windows 7. Let me know if you need assistance?

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/LaserJet-1012-driver-for-Windows-7/m-p/351356#M16114

• DownGrade Windows 8 Pro 64 bit on 4540 s HP Probook Windows 7 Pro 64-bit

  Hello

  can someone tell me the correct procedure to downgrade pre-installed 64-bit Windows 8 Pro that came on my laptop 4540 s newly purchased to Windows 7 Professional 64-bit? Machine itsself comes not with any media. I also read the key is now also integrated into the BIOS. As I intend to replace the 500 GB HDD with a SSD 250 GB, I would like to re - install windows 7 at the same time. I know that you can download the vanilla windows versions 7 of m6mobile.fr and others and then install but I wanted to know if there was a formal process for HP machines. It would be also good to know that the process of extraction of the COA, so I can activate Windows 7 installation completed.

  I am based in the United Kingdom (and an employee of HP)

  (it seems I'm not the only one having this problem - I guess this method works http://www.pcworld.com/article/2015107/downgrading-from-windows-8-to-7-what-you-need-to-know.html?pa... )

  but before could someone confirm that part "call microsoft" will be ok for me if I have no physical cost... also what can I do if I have not a pro windows 7 product key to enter during the installation of windows 7 - because obviously I intend to use the rights to downgrade to windows 8 pro key!).

  advice appreciated.

  Ad.

  Ok...

  so having figured out that I can downgrade sounding MS I took the lead and mounted my new SSD drive and installed Windows 7 Pro 64 bit. Everything is good. What I need now is some of the correct drivers to get me going.

  If someone could point me to the right for the following, I'd be grateful so I don't waste time to download everything. My version is HP Probook 4540 s C4Y79EA (i5-3210/4 GB RAM/15.6 inches) model British.

  Some of the choices pilot have several versions of pointers to good enjoyed.

  It is mainly in the field of the network drivers for the Wifi and fixed ports.

  Thank you.

  I determined what hardware is in this model.

  WIFI/Bluetooth - download drivers Ralink

  Ethernet card integrated - download the Realtek drivers.

  The rest should be pretty straigtforward...

  Cheers.

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  Hello

  It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

  If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

  PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

  Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

  Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

  Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

  Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

  I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

  It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

  Thanks in advance for your suggestions!

  I will proceed to a re - install now, thanks anyway for your efforts

• 0x8007045D error code when you install Windows 7 Pro 64-bit

  I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.

  16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.

  I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.

  Someone at - he already had this?

  Any help would be appreciated.

  Thank you

  Try to reduce the amount of RAM installed on a unique key and try again.

  If you have several hard drives attached, disconnect all except the disk target hard.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Unidentified network Windows 8 Pro

  Hello

  I have a Windows 8 Pro 64 bit computer bit and it said that my wifi internet connection is "not identified-no network access.
  I have a WiFi hotspot and it works on the PC of my father and my Android tablet. (by the way, the hotspot is a public network with a p/sem.)
  I tried:

  Restart the PC and the router,

  Windows Troubleshooting (poster "WiFi is not a valid IP configuration")

  Have turned off Windows Firewall (witch worked for 10 minutes) and I uninstalled Quicktime & Hello,.

  I have no strange services that run in the background in taskmanager

  Unchecked TCP/IPv6

  Turn off/on WiFi adapter

  Uninstall the driver for the WiFi card.

  Deleted ROUTE 0.0.0.0

  'Forget' the network

  Re-installation of IPv4 & Ipv6

  I ran as administrator of these commands

  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  netsh int ip reset C:\netsh.log.txt
  netsh winsock reset

  All do not work. I noticed a strange thing. In the properties of the wireless adapter TCP/IPv6 & TCP/Ipv4 have "Uninstall" whited.

  I tried to reinstall them but that has not worked.

  The last program that I installed is Adobe Download Assistant (I uninstalled, did not work)

  And the last update of Windows installed is a "critical update for Windows 8. But he did not set a restore point before installation.

  Any help would be appreciated.

  Josh

  PS: I contacted my internet provider and they said: 'this isn't our fault, contact the manufacturer of your PC. I did, but he couldn't understand our either.

  Josh,

  There is an APIPA address assigned automatically to the adapter wireless and as a result of which you cannot join any network or Internet access.

  APIPA - an automatic private IP addressing

  Addressing IP private AUTO is a DHCP (Dynamic Host Configuration protocol) failover mechanism for local area networks. With AUTOMATIC private IP addressing, DHCP clients can obtain IP addresses, when the DHCP servers are non-functional. AUTOMATIC private IP addressing is in all modern versions of Windows.

  When the failure of a DHCP, APIPA server allocates IP addresses in the private range 169.254.0.1 to 169.254.255.254. Customers ensure that their address is unique on the network using ARP (Address resolution Protocol). When the DHCP server is again capable of service requests, clients automatically update their addresses.

  APIPA, all devices using the default netmask 255.255.0.0 and all reside on the same

  I would have you try these commands once more.

  netsh int ip reset resetlog.txt
  netsh winsock reset
  ipconfig/registerdns
  ipconfig/flushdns
  ipconfig/release

  Restart the computer, and then check if you are able to connect to the network.

  If the problem persists, manually assign an IP address to the wireless network and then try to ping the router to check if there is a good connection.

  -Press the Windows key and the R key and then type NCPA. CPL

  -Right click on the wireless network you are using, and then select Properties.

  -Highlight or select version 4 Internet Protocol and click Properties.

  -Select the option use the following IP address.

  If the IP address of the router is 192.168.1.1, and the other the computer IP address is in the same sequence 192.168.1.2, then try to assign 192.168.1.3 and mass subnet 255.255.255.0 and press ENTER.

  -Close the network properties window.

  -Open the command prompt and type ping 127.0.0.1 and press ENTER.

  -Type ping 192.168.1.1 and press on enter

  -Type ping 192.168.1.3 and press to enter.

  Let us know if the packets sent are equal to the packets received.

  Post a screenshot after doing so.

• Aurora running, but can not be played on Desktop Windows 7 pro 64-bit

  I've been using Aurora for several years with Windows 7 pro 64-bit with the two latest major 28/29 Auroa just missing from my desk after clicking on the icon on the desktop, I tried to uninstall, but the system told me I had still Aroura running uninstall so I had to reboot my PC, I could uninstall I then reinstalled Aurora and a pinned icon appeared in the taskbar, but when I clicked on the icon on the desktop the hourglass turned but no Aroura started on the desktop, so I went through the whole thing again and uninstalled Aurora and installed Firefox V26 and now it has progressed to the last version that has disappeared as exactly the same way.

  What can I do if I use Aroura again because it is very good and safe to use?

  I can't use the troubleshooting info as I can't see Aurora/Firefox to view or copy/paste the info shown.

  Pete

  Thank you solved the problem, I restarted the PC and now Aurora works again thanks.

• Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

  I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

  Thank you

  Hello

  As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

  http://support.HP.com/us-en/document/c00033108

  Your machine could be the following:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  If so, the #4 on the following manual page it support 16 GB max:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

  Kind regards.

• HP PavilionSleekbook 15-b009ee: HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64-bit drivers

  I need the Drivers of HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64 bit. Please if someone can sat down me.

  Hello:

  Try the W7 x 64 drivers and software for this model except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-Ultrabook-4-1100/5296027/model/5316650

  Your model uses the Intel HD graphics driver.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles

• BIOS 4.03 for workstation xw9400 running windows 7 pro 64-bit

  None does not know where and how can I update the bios on a running windows 7 pro 64-bit xw9400 (HP does not list in the drivers section?) currantly only got bios V3.13 and im sure it should be on atleast v4.03?

  see you soon

  Oh well all good now, worked to followed her the road to iso cd and managed to update the bios to version 4.03.
  
  Once again thanks for the support...
  
  Concerning
  Chardsky...