Uninstall hardware DEP

Similar Questions

• Unable to find the bing or acess dep of mail toolbar outlook stops off

  I had various problems for months. I am running windows 7 Home premium IE11 hp office. Now I can't find the bing toolbar or open outlook mail when I click on bing or outlook mail, he opens a box of blue or pink in the address bar and some time a box that says white and I stop can open web sites of the bar Favorites and the web pages of the msn home page. I ran fixit it says disabled DAP and I fixed outputs checked and problems still run fixit new repaired disabled DAP do not know what is turn off DEP. I reset IE setting deleted cookies and ect did not work I tried to uninstall and reinstall ie11 when I uninstalled ie11 he returned to ie8 just worked in ie8, ie10 there the same problems as ie11 I went to the Microsoft Download site and downloaded the recommended ie11 it was almost over, I installed and a box came and said there no she had a link to which is why it has not I open it says files missing to use windows update to find the files that I run updates did not find all the files. I tried to reinstall again, but has once again, then I went to restore to an earlier time, now I ie11 with the same problems of recovery. Could the DEP cause this problem, I read that IE and windows have their own settings of dep how to find what is the problem

  Hello

   

  Please contact Microsoft Community.

  Data Execution Prevention (DEP) is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system. The main advantage of the DEP must help prevent the execution of code from data pages. In general, code is not executed by the default heap and the stack. Hardware DEP detects code that is running from these locations and throws an exception when execution occurs. Software DEP can help prevent malicious code to take advantage of exception-handling mechanisms in Windows.

  I suggest a few steps, follow and see if it works:

  Method 1: resolution of security issues to launch Internet Explorer.

  http://Windows.Microsoft.com/en-SG/Windows7/open-the-Internet-Explorer-safety-Troubleshooter?11341f78

  Method 2:

  Run the Microsoft safety scanner and check if your computer is infected with malware.

  
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

  Kind regards

  Anusha

• reinstalling hardware

  When you try to find the driver for my dvd/cd on mydesktop I accidentally uninstalled hardware.  How can I reinstall?

  Hello

  Restart the PC and Windows should reload the driver for the scanner.

  Kind regards

  DP - K

• SL500 virtualization and hardware

  I bought SL500 today, and to my surprise, I can't enable hardware virtualization in the BIOS. There is no option. Processor which is inside supports something like this (checked on the Intel Web site). Accordint to a few other test machine, takes care of hardware DEP. I even tried updating the bios to the latest version, but when I gor to settings of the processor. There is no option to turn on hardware virtualization? Why are they announcing these features when they are not available? Type of CPU is Intel Core 2 Duo T5870. Can anyone help? I'm doing something wrong?

  
  

• Turn on DEP for all programs or Just essiential

  OK, I have windows 8 and my processor supports hardware (Data Execution Prevention) adj. I sorta understand the concept of DEP however not enough to know whether it should be enabled for all programs or all necessary programs or since my processor hardware DEP can I disable DEP Windows?
  All the information to help me understand better and an answer would be thank you much.

  Hi Peter,.

  Data Execution Prevention (DEP) is a security feature that can help prevent damage to your computer from viruses and other security threats. Harmful programs can try to attack Windows by attempting to run (also known as execute) authorized the code from the locations of memory system reserved for Windows and other programs. These types of attacks can affect your programs and files.

  DEP can help protect your computer by analyzing your programs to make sure that they use the system safely memory. If DEP notices a program on your computer using memory incorrectly, it closes the program and notifies you.

  It is not recommended to disable the DEP. DEP automatically monitors essential services and Windows programs. You can increase your protection by having DEP monitor all programs.

  First, see if a version compatible DEP for the program is available by visiting the website of the software publisher. If the Publisher has not released an updated, compatible version DEP for the program, you can turn off DEP for the program that was closed. You will be able to use the program, but it might be vulnerable to an attack that could spread to your other programs and files.

  If you choose to turn off DEP for a program, it's a good idea to check frequently for an updated version of the program and, after you update, to turn on DEP again.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Installing the driver on the Qosmio G20

  I have a G20 machine (bought from the Japan) and I want to install my copy of XP pro.

  XP Setup works well until the end, then I start to install the driver and the software as suggested by Toshiba:

  acoustic silencer V1.00.005A
  help V1.02.00_TINASSIST_NUER20MA
  --> NOT INSTALLED atheros wlan 802.11ag / utility V3.1.2.19I123 g
  --> Bluetooth has NOT BEEN followed V2.0 (B20041111)
  Toshiba bluetooth stack V3.3.10.01 BUILD20041209
  Texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
  Utility Intel chipset software installation V6.1.0.1008
  common modules V6.02.04
  ConfigFree V5.00.48
  controls V3.16.2400
  display the change of aircraft V1.6.0.0 utility
  NVIDIA geforce go 6600 display V6.14.10.7118 driver
  Hotkey to display V2.8.0.0 - 00 - XP
  fix for "cumulative security update for ie ' Q834707
  fix for "question in hyperterminal could allow code execution" KB873339
  fix for 'problem in the kernel windows and lsass' KB885835
  fix for "issue in wordpad could allow code execution" KB885836
  fix for 'windows firewall only my network (or subnet)' KB886185
  --> NOT INSTALLED hardware (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
  SM214710AD2 Toshiba software modem
  V8.0.1.1 card WIRELESS Intel(r) pro/100 ve
  PC V3.1.0 diagnostic tool
  development of picture V2.7.0.2 utility
  V7.05.04 energy saving
  Toshiba V1.00.0013 for NUR20 raid driver
  utility RAID V1.2.0.25
  SD V2.0.2.1A memory card format
  secure module SD V1.0.2
  SoundMax integrated digital audio V5.12.01.5240U
  --> NOT INSTALLED sun java 2 runtime environment V1.5.0
  Touch and the launch of V1.2.7.0
  V6.0.304.6 Alps pointing device driver
  Press the start/stop utility V2.05.00
  utilities V4.20.26
  Virtual sound v1.00.05UPDATE
  V2.0.0.5 wireless keyboard shortcut
  wireless network card mini pci Atheros ar5001x V3.1.2.45
  Intel wireless b/g V9.0.1.9 lan driver
  utility V2.0.0.20C zoom

  In addition to the above, I have install the driver of TV tuner driver DVD RAM, the utility Maximizer and does not have the cause of the Atheros 802.11 driver, it seems, the machine has a network card Intel (is true?)

  But when I arrived at the end of this procedure the system starts and works fine the first time, but when I restart the machine that the hourglass will for centuries and I need to restart in safe mode using the Manager tasks.

  I have a feeling that the problem is related to the utility Configfree or be WIFI.

  I tried to uninstall the Configfree but the problem is still there!

  There, can someone help me? !!

  Hello

  You are right. If the device has an Intel WLan card you n t need to install Atheros utility and Atheros WLan driver. But you need the Intel WLan driver.
  I don t think that the problem is the utility Configfree. In my opinion you should check into the full background due to CPU performance process using Task Manager.

  Good bye

• Global problems with IE crashing after installing the latest updates from Ms.

  After the installation of the last series MS Updates, we are seeing users get first notification DEP for Windows Explorer (using IE7), then an other error message stating that Windows must close THE Explorer. What happens when users try to access our portal Citrix Presentation Server SSL/VPN.

  Hi Chad t,

  Data Execution Prevention (DEP) is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system.

  The main advantage of the DEP must help prevent the execution of code from data pages. In general, code is not executed by the default heap and the stack. Hardware DEP detects code that is running from these locations and throws an exception when execution occurs. Software DEP can help prevent malicious code to take advantage of exception-handling mechanisms in Windows.

  Microsoft does not recommend to Turn off the Data Execution Prevention (DEP).

  For more information on DEP, you can access the link below for the blog that talks about the DEP and the DEP/NX problems.
  http://msdnrss.thecoderblogs.com/2009/10/10/understanding-depnx/

  As you mentioned it started after the updates, I also suggest you to uninstall Internet Explorer and put it back manually and see if the problem persists. Access the links below for the steps to uninstall and reinstall Internet Explorer 7 respectively.

  http://support.Microsoft.com/kb/927177

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B&displaylang=en

  For further assistance, you can also consult to Citrix Support to see if they have a fix or a workaround is available.
  http://www.Citrix.com/lang/English/support.asp

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 'Failure of the Webcan pilot open' on Tecra A10

  Need help...

  I have a laptop Tecra A10 - 1 hr. Operating system is windows XP Professional. When I start my system, it gives an error in the webcam driver open failed. My built-in webcam does not work. Tried to uninstall the software, download new ones from the support site and installed. No luck. My BIOS version is more recent. In the Device Manager under imaging of his display as a USB peripheral devices. When I try to update driver from there it s showing as driver of Microsoft instead of Chicony2. Not able to change it.

  Uninstalled hardware device manager and installed it again. Still the same problem. Tried to install it manually. Still no luck... Help, please. The only option that remains for me is to get the operating system to factory settings. Its a huge task for me. Other solutions, appreciated...

  Thank you
  Maryse

  any update

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• XD - bit (CPU function) disabled/not available for Satellite A100-PSAA9

  Last week, I bought the laptop Toshiba Satellite A100-847 (Satellite A100-SPAA9) which has an Intel Core 2 Duo, model T7200.

  Specifications Intel, this processor (as all Core and Core 2 processors) has the particularity of XD - bit, known in Windows like DEP. I had the unpleasant surprise to discover that this feature is
  reported by Windows as unavailable (in hardware). I got the electronic manual on the recovery CD (which is an edition that is older than the printed manual that comes in the package) that I can do this feature
  available (for some older models of Satellite) but I couldn't find any option in my BIOS to do this (my BIOS is made by Phoenix, version 2.0).

  I really want to know how to make this feature available/active as my processor socket and so is the operating system purchased with the laptop and more than that, this feature is something beneficial - specially designed for security reasons and supported by all modern processors and operating systems.
  What do I have to wait for an updated BIOS include this option (to activate the feature XD bit) or that it is automatically set as active/available (instead of disabled/not available)?

  I expect a well documented answer from someone who knows what I'm talking about.

  Thank you very much.

  Hello

  I know what you're talking about.
  Execute Disable Bit (xD-bit) Intel can help prevent certain malicious types of buffer overflow attacks when combined with a compatible operating system.
  Disabling malware code procedure is called the extension-> short adj. data protection

  Data Execution Prevention (DEP) helps prevent damage from viruses and other security threats that attack by running (executing) malicious code of the locations of memory that Windows and other programs should use. This type of threat causes damage by taking over one or more locations of memory used by a program. Then she spreads and harms other programs, files, and even your email contacts.

  Unlike an antivirus program or firewall, DEP does not prevent harmful programs from being installed on your computer. Instead, it monitors your programs to determine if they use the system safely memory. To do this, DEP software works alone or with compatible microprocessors to mark some memory locations as "non-executable".

  If a program tries to run malicious code or not a protected location, DEP closed the program and notifies you.
  DEP can take advantage of software and hardware support. To use DEP, your computer must be running Microsoft Windows XP Service Pack 2 (SP2) or later version, or Windows Server 2003 Service Pack 1 or later version. Software only DEP helps protect against certain types of malware attacks, but to take full advantage of the protection DEP can offer, your processor must support "execution protection".

  The Windows 32 bit (SP2) version supports bit off Execute (xD) so the computer function notebook processor is running in mode of extension (PEA) physical address.
  It is a technology based on hardware designed to mark the locations of memory as non-executable.
  If your processor doesn't support hardware DEP, you need to upgrade a processor that offers execution protection features.

  However, you can see the control panel-> system-> Advanced tab-> Performance settings-> Data Execution Prevention tab.

  By default, DEP is enabled only for essential Windows operating system programs and services. In order to protect more programs with DEP, select turn on DEP for all programs and services except those I select.

• Apple iTunes will not run.

  Apple iTunes will not run.  I reinstalled several times. The error message has something to do with DEP.  But I doubt that iTunes referred to system memory.  In addition, my PC has hardware DEP, no software.

  Thank you.  Found the answer in the Apple community.  I had to reinstall Quicktime in order to get iTunes to run.  They had lost their association.  Everything works now.

• Windows 8 compatibility with Vostro 420 BIOS v1.3.0

  Vostro 420
  Windows 7 64-Bi
  BIOS 1.3.0 (last update, version 2010)

  Hello:

  The Vostro 420 yourself running Windows 8 when it comes out next month?

  And the Vostro 420 DEP support bios? (I read Windows 8 needs a bios with the support of the DEP)

  Thank you

  Hello

  The Vostro 420 has not been tested by Dell with Windows 8. However if you use Windows 7 on your system it will avoid any compatibility issues.
  You can also check if hardware DEP is available on your system by performing the following steps.

  How to verify that hardware DEP is working in Windows:

  1. Click Start, click run, type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER:
     WMIC OS Get DataExecutionPrevention_Available
  3. If the output is "TRUE," hardware DEP is available.

  After the official launch of Windows 8, pilots cannot be available on the Dell support site. However, you can always check the site of the manufacturer for the appropriate drivers. You can also consult the following link for more information on the upgrade of Windows 8. http://Dell.to/SyrDsU

• How to disable the Extension of physical address (EAP) in guest VM?

  Recently, I moved serveral Citrix Application Server virtual machines of our ESXi environment in our new ESX environment.

  Today, we had some users complain a Citrix application did not work and gave a memory error when they tried to run it.  After having looked into the problem, we found that when we discover the properties on all the virtual machines in ESX they are all PAE enabled, even if there is no/PAE switch in the boot.ini file.  I looked then the VMs remaining in ESXi and none of them indicate that they use EAP and I confirmed that the Citrix VMs in question did not EAP use when they were on ESXi.

  A bit of googling indicated in other words we disable Data Execution Prevention (DEP) with the/noexecute = alwaysoff switch in the boot.ini file that would solve our problem.  So we tested which and of course, the error memory disappeared and people could use the Citrix application that they could not use before when the switch of /noexcute introduced the opt-out.

  So something about the combination of ESX forcing EAP in our throat and how he plays with DEP causes this problem.

  As the individual Citrix Application VM has only 1 GB of vRAM, I do not see the need for the EAP and I would like to know if there is a way to tell ESX to not use it?

  -Added after the original post-

  I just tried to replace the/noexecute = optout or/noexecute = alwaysoff switch in the boot.ini file with / run and eliminates actually of EAP, but also how to disable DEP which we would prefer not to do if possible

  EAP is required for the DEP.  Two-level page tables have no place for the NX bit.  See http://www.microsoft.com/whdc/system/platform/server/PAE/PAEdrv.mspx:

  The PAE kernel can be activated automatically without the/PAE switch present in the boot entry if the system has DEP enabled (/ NOEXECUTE switch is present) or the system processor supports hardware DEP. presence of the switch/noexecute on a system with a processor that supports hardware DEP implies the/PAE switch. If the processor in the system is capable of hardware DEP and the/noexecute switch is not present in the boot entry, Windows considers / noexecute = optin by default and enables PAE mode. For more information, see the "Boot Options in a Boot.ini file" topic in the Windows DDK.

• How do I uninstall dep

  Data execution prevention is a big headache on my windows vista computer. Whenever I want to open my video file it stops working and windows must be restarted. Please help me with this. Is it possible to uninstall DEP and any other solution for this problem.

  Data execution prevention is a big headache on my windows vista computer. Whenever I want to open my video file it stops working and windows must be restarted. Please help me with this. Is it possible to uninstall DEP and any other solution for this problem.

  First of all please read this:

  Warning

  Do not disable DEP or exclude (opt-out) a program, unless you have adequate protection and have problems with a known safe program that DEP won't let not executed and you can't live without it. Don't forget THAT DEP has shut down the program for a reason. It's just a bad running program, or some sort of malicious software trying to enter limit memory.

  Information

  Data Execution Prevention (DEP) is a security feature that can help prevent damage to your computer from viruses and other security threats. Harmful programs can try to attack Windows by attempting to run (also known as execute) authorized the code from the locations of RAM (sharp) system reserved only for Windows and other programs. These types of attacks can affect your programs and files. If DEP notices a program on your computer using memory incorrectly, he left the program and notifies you with DEP stop error. DEP runs in software mode and hardware mode. If your processor supports the DEP (NX for AMD) and XD for Intel, then you will have hardware and software DEP. If it isn't, then Vista will use software Dep. 64-bit applications will have DEP activated all the time by default, but 32-bit applications are not and must have DEP activated manually for them. For more information, see: Windows Help and Support: Data Execution Prevention: FAQ

  Note

  If a program is closed by the DEP, then make sure it is a DEP-compatible version and look for an updated version. If it's not compatible DEP, then you can uninstall the program or Disable DEP for this particular progress

  If you still insist on turn off DEP, so here's the tutorial
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

• Turn off DEP in hardware

  I have a HP Pavilion dv9000 running Vista Home Premium SP1.  I'm trying to remove Norton Internet Security in order to install a different virus program.
  Uninstall Microsoft immediately blocked and uninstalling Norton works partially before stopping with a message that it has been terminated by the DEP.
  I ran the prompt for the value of nx AlwaysOff, restarted and confirmed the code SupportPolicy = 0.
  Rerun the tool Norton plant yet.
  Should I turn off DEP at the hardware level - this possible?
  Thanks for any advice.

  Hello

  Disable, not uninstall, all the components of Norton, including all startup entries, services (use of msconfig for it) and restart. Once disabled, you should be able to uninstall components without DEP problems, because the software will be more active.

  On the DV9000 series, I do not believe that the BIOS supports in all cases turn off DEP at the hardware level. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org