Union access to the CF query - problem

Similar Questions

• Access to the user account problems - I am the owner of the administrator account

  I try to use windows powershell, after I discovered the executionpolicy (one word) was reduced, tried to change it using the set command, told me that I had no access to the registry. I have administrator privileges and it's my computer, as far as I know that I am the only person who uses it, and I have no guest account, I cannot access the registry key. I don't want to stop user access control. You have any ideas?

  Hello

  Please take a look at response Pegasus in the following thread replied:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/access-denied-setting-owner-andor-permissions-on/71cdd66a-75Ce-4E79-BACE-89637e0dacae

• Access to the Marina wifi problems

  I live in a marina and use the wifi from the marina.  My iMac (2008, equipped with internal wifi) is low in the boat (galley down), which is fiberglass, but has wires and other equipment in the world.  When it is docked (that's all I'm concerned about here), not a large part of the equipment works except appliances regular and battery 12v and 32v "offers/Chargers"  I borrowed a Belkin range extender (1106v1 F9K), which helps, but not enough.  It is an inner ring road and the line of sight to the antenna of marina (150 feet) and (less so) to my computer are not good.  I have examined) 1 antenna USB iMac (--> Belkin?), 2) hacking a router not used the Belkin (cable?), 3) installation of a wifi antenna ($$) on my arch of radar which would have good line-of-sight and might, without effort, wired ($) directly to the computer or to an access point (terminology?)  (?$).  Next gen electronics marine start using some wifi and if this last combo would allow this traffic, it is worth the investment.  There are other options for example. existing antenna (VHF?), beach (?) radome, beach dome (?) satellite.  Here, the "old salts" around know the antenna, but not computers.  I do not know! (But difficult).  There are many other wifi signals locked appear on my computer.  I am a small time internet user but considers Netflicks marina limit myself to only basic cable!

  You aren't going to get the bandwidth for netflix on any shared... wireless system, so it's out of the question... you will need to hold for release into the atmosphere of TV or your collection of DVD/bluray.

  Directional antennas are the key to this... WiFi is more powerful because the problem is receiving does not transmit.

  And you need to get a direct line of sight to the wifi everywhere where it is setup in the Marina... because it is not possible to get the signal through some big boats steel nice... your fiberglass is very well... unless he has mixed in freezing metal. In any case on a boat to mount the antenna as high as you can... and the router with it... so you can connect to it by ethernet would be the best... Although you can use wifi if you wish, messy but possible.

  You can buy outdoor combined AP suited perfectly to your task.

  Here is the outdoor kind of AP you want to buy.

  http://www.TP-link.com.au/products/details/cat-4581_TL-WA7210N.html

  Most brands will have this kind of thing... Ubiquiti is one of very good... but buy just 150 Mbit, which is more than enough for what will use wifi.

  https://www.ubnt.com/Unifi/Unifi-AP-outdoor/

• restrict access to the php page problems

  I'm trying to use the dreamweaver php restrict access server behavior and will have success on both my local maching and my own host. However, the same script does not work on the server of a customer hosted by Verio on a Windows shared hosting plan.
  
  index.php = login page
  Login.php = forwarding connection failed
  client.php = page with a script to restrict access.
  
  If I remove the script of restricted access, I was able to connect fine and see page client.php. However, if I understand the access restricted in the client.php script, I get kicked to the login.php page. I only check the username and password, not the user level.
  
  Here is a brief overview of the two assemblies
  
  localhost:
  MacBook pro running apache
  PHP 5.2.0, mysql 5.0.22
  register_globals = Off
  
  Client server:
  Host = verio
  Windows shared hosting plan
  PHP 5.2.0, mysql 5.0.24a
  register_globals = Off
  
  Session settings are the same as the file phpinfo.php (with the exception of the local value of the session.save_path to the verio server)
  
  I can return the value of the username (and pass) using the {print $_SESSION ['MM_Username'] ;} on client.php page when I comment on the script to access restricted on the client files.}
  
  I wonder if there is a php setting that is causing the problem?
  
  Any help is greatly appreciated.
  
  Kind regards
  
  Mike
  

  According to media, the current windows has limited hosting plan supports for php scripts.

• Windows 7 - access to the file permission problems

  I have a new laptop of Dell M4700 with Windows 7 64-bit, and file access permissions are create chaos.

  When I open a file for editing, the computer only wants to save - under a different file name, not simply to save the existing file.  This occurs in Notepad and several other programs.  It's the same thing that hit the button "save under" instead of simply register.

  Several times at the opening of files, in particular on external drives, the file will only open read-only.  I can copy the file to the local hard drive, and it works normally.

  So far, I tried the following:

  • I have administrator rights.
  • I went through and all the property of the files changed for me.
  • Make the read-only attributes of course removed
  • Run programs as an administrator
  Any help to resolve this would be greatly appreciated.

  Looks like you don't have permission in writing to these files.

  To resolve or explain it, you look at the permissions on the file/folder and they are explicitly defined or inherited from the parent folder (or higher).  When it comes to permissions, administrators are users like everyone else.  Directors may be refused or permissons to files or folders like any other user.  Even the file owner can change permissions such as he is denied access to its own folder.  The only advantage that owners and managers have is permission to change permissions.

  You need view the permissions currently in effect for that file.  Usually, this is done:

  Right click on the file / folder-> properties-> tab 'security '.

  At the top will be list users and groups with permissions and if you click on it, the bottom window displays their permissions.   Learn more about this everything is there:

  "Together, see, change, or remove permissions on an object.

  <>http://TechNet.Microsoft.com/en-us/library/cc731667.aspx >

  This will lead to other links which provides information on how to set permissions.

  HTH,

  JW

• Problem with the simple query.

  Hi all

  I am facing problem with the query below

  Select A.COL1, A.COL2

  B.COL1, B.COL2

  FROM TABLE1 A

  TABLE 1 B

  WHERE A.header = '123'

  AND B.header = '123'

  AND nvl (A.COL6, 'ABC') = 'ABC '.

  AND NVL (B.COL6, 'DEF') = 'DEF '.

  Basically, my requiremenyt is: I have only one table, TABLE1 here, which has a line two lines (for the same header) as "ABC" and another is "DEF". Table 1 has two columns (col1, col2) that should be displayed for both lines.

  When the header has two records in table1 top query works. and but if I do not have a record for any header example there are a record for "abc" in col6 only. so my query above does not work because there is no record for 'DEF' in col6. But I want to again request to fecth the output (for b.col1 and b.col2 should have null values)

  could you pls suggest me how to get the 4 columns.

  Thanks in advance

  Kind regards

  UVA.

  Try to place the status of outer join on column: analytical_criterion_code as

  and nvl (AUDIT.analytical_criterion_code, 'AUDIT2') = 'verification2. '

  .

  .

  and nvl (TRANS.analytical_criterion_code, 'TRANS2') = 'TRANS2.

  In the sub query based on the opinions that you have given in post # 1, although there is no value "DEF * ' for col6 due to the condition of outer join on b.col6 (+) line is extracted with b.col [1,2,3] as NULL values. Try to remove the (+) sign b.col6 and test.

  with t as)

  Select 111 col1, col2 'aaa', 'ABC' col6 123 header of all the double union

  Select 222 'bbb', 'DEF' col6, 123 double header

  )

  q as (select 123 double header)

  Select A.COL1, A.COL2, A.COL6

  B.COL1, B.COL2, b.COL6

  q.header

  T a

  t b

  q

  where a.col6 (+) = 'ABC '.

  and b.col6 (+) = "DEF."

  and q.header = a.header (+)

  and q.header = b.header (+)

• Performance problem on the SQL query that does not use the primary key index

  Hello!
  
  I have some performance issues on a single SQL query (Oracle 10 g).
  I could solve the problem by using the INDEX indicator, but I would like to know WHY this is happening.
  
  * Tables *.
  create table jobs)
  ID number (5) not null,
  name varchar2 (100),
  primary key constraint Job_PK (id)
  )
  /
  -Record count: 298
  
  create table Comp)
  integer ID not null,
  name varchar2 (100),
  primary key constraint Comp_PK (id)
  )
  /
  -Record count: 193
  
  -Relation m: n
  create table JobComp)
  integer ID not null,
  id_job integer not null,
  id_comp integer not null,
  primary key constraint JobComp_PK (id),
  unique key constraint JobComp_UK (id_job, id_comp),
  Constraint JobComp_FK_Job foreign key (id_job) refers to Job (id),
  Constraint JobComp_FK_Comp foreign key (id_comp) makes reference Comp (id)
  )
  /
  create index JobComp_IX_Comp on JobComp (Cod_Comp)
  /
  create index JobComp_IX_Job on JobComp (Cod_Job)
  /
  -Record count: 6431
  
  * Ask *.
  
  When I run this query, the execution plan shows the index using (JobComp_PK and JobComp_IX_Comp).
  No problem.
  
  Select JobComp.*
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  But when I add the field 'name' of the work table the plan uses full access table to the table of work
  
  Select JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in the 2.70 dry
  
  With the help of the index
  
  Select / * + INDEX (Job Job_PK) * /.
  JobComp.*, Job.name
  of JobComp
  Join jobs
  on Job.id = JobComp.id_job
  where JobComp.id_comp = 134
  /
  -runs in 0.20 sec
  
  * Doubt *.
  
  This behavior is correct?
  
  PS. : I tried to recalculate the statistics, but nothing changes:
  
  analyze the job calculation table statistics.
  /
  change the statistical calculation of index Job_PK reconstruction;
  /
  Start
  dbms_utility.analyze_schema (sys_context ('userenv', 'current_schema'), 'CALCULATE');
  end;
  /
  
  [of]
  Gustavo Ehrhardt

  Gus.EHR wrote:
  Hello.
  I'm sorry for the plan unformatted.
  The execution time of the querys "without field name' and 'with the field name with suspicion" are equal.
  He has no problem caching, because I get the plans of the sequence different from the querys and repeated the performance. The result is always the same.

  I don't think that there is no problem with oracle crossing LOOP IMBRIQUEE to the HASH JOIN when you include the field name and this should be the expected behavior. But it seems that your WORKING table has a degree of parallelism set against what is causing the query to run in parallel (as JOB table is now available with full table scan, instead of indexed access earlier). It could be that the parallel execution is contributor to extra Runtime.
  (a) do you know why the degree of parallelism on the WORK table has been defined? Do you need it?

  You can see if the following query provides a better response time?

  select /*+ NOPARALLEL(JOB) */ JobComp.*, Job.Name
    from JobComp
    join Job
      on Job.id = JobComp.id_job
   where JobComp.id_comp = 134
  

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Access to the eccentric camera and GPS problem

  I love this phone and use it for a few weeks now. I know that the update just worked for T-mobile, and the biggest problem he treats is the camera. My question is if anyone knows if this update fixes other issues?

  One of them is how he takes the X bike to pin point its location. I know that most of the Android phones are simply not very fast when it comes to this, but this phone takes more time than many other phones I've used (most recently a HTC One).

  Another problem is, like many of us, I take lots of photos, and access to the camera can be tricky. I like to review my photos before I quit the application. Later if I want to go in the camera app, it brings me to the last image I tested, instead of the camera. Very well, but when I swipe to the left to reach the camera, he leaves the app. Also the camera icon on the bar above the image is missing, so I can't easily access the camera.

  Is the application gallary your default program for image manipulation? This happened to me when I made the default handler quickpic.

• Problem: Access to the database.

  Hello.

  I have a problem with my NI Multisim 12 (Student Edition). It installs correctly and correct registry also, but when I run the program it displays these messages

  "Problem: access to the database."

  The data are not available. Functions using the database will be unavailable. »

  And similarly for the database and database user.

  In the end, it shows this message:

  "Multisim has detected that the main database is not on the current user. Reinstall the program from the original media. »

  I have the original of 2012 Labview and Multisim 11 (from a myDaq) media.
  After that, I can place any component because the program cannot access data bases. I can open previous designs, but it is not properly simulate.

  I am the only user of the computer, and I am the administrator.
  I have a 64-bit Win7 with Core 2Duo 3 GHz.
  I recently installed Labview 2012, which includes this software, so I uninstalled previous Multisim.

  On the same computer without any problem, I used Mutisim 11. I tried to reinstall Mutisim 11, Mutisim 12, delete windows registry, remove files after installation, giving permission for all files and nothing works. Whenever I have reinstall Multisim it displays these messages.

  Please, help me!
  Any help, or anyone with this problem or similar, let me know also.

  Thank you!!!

  Once again, many thanks. I solved the problem just now. I need to change the windows registry, following the instructions in the link. Thank you
  PD: Do not use Ultralibrarian unless you have a non-free license! hehe.

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• WVC210 DYDNS AND PROBLEMS WITH ACCESS TO THE WEB

  I have 2 Configuration for WVC210 cameras on dydns of deleted I can't see them on the web. I can access via the local network using the ip address and port or the dyndns name and port. The router has listed as a virtual server and I even put one of them is like DNZ (outside the firewall of the router), the port check tools show a port opened from a remote location. And I can ping. But I can't connect to the camera. Also, I was able to view a WVC54GCA camera with the same configuration. Any ideas?

  I can get both of these cameras no problem... just not able to connect but the login box comes right to the top as soon as I hit him enter after you put the URL...

• Problems of access to the files of user account after the change of password

  I forgot the password of a user rarely used account, so I changed the password as an administrator.

  I can now get access to the account, but the only problem is that all files seem to be empty.

  Is it possible that I can get access to the original files?

  Hi Carol and John Winter,

  1. What are the files you are trying to access?
  2. how exactly you are trying to access these files?
  3 is confined to a specific folder?
   
  Check what is the file size by following the steps mentioned below:
  1. right click on the folder and click Properties.
  2. check if the file size is 0, if it is 0, this means that the folder is empty.
   
  It can also be a problem with permissions.
   
  Check out the following link and check.
  What are the permissions?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
   
  Hope this information helps.

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.