Access to the Marina wifi problems

Similar Questions

• Photosmart 7510: Access to the separate wifi network printer

  I have 2 wifi networks, for the expansion of the range in my house; We built my router (Fios) fios and others (Asus) connected to the same router via ethernet.  My printer is connected to the wifi Fios network.  When I'm at the back of the House, I connect my laptop to the Asus wifi network but am unable to connect to the printer.  Is there a way to make the printer visible on both networks?

  Hi @lsrothstein,

  Welcome to the HP Forums!

  I see you're wondering if you can access the printer HP Photosmart 7510 of several networks at once. I'm happy to answer that question for you!

  The printer is designed to work only on wireless at the same time. So to be able to print to the printer, the cell phone/mobile device must be connected to the same wireless network to which the printer is connected to. think of it as an invisible cable from the computer to the router, to the printer.

  This website, HP Wireless Printing Center - basics wireless, goes into great detail, if you are interested.

  Hope that answers your question and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Access to the user account problems - I am the owner of the administrator account

  I try to use windows powershell, after I discovered the executionpolicy (one word) was reduced, tried to change it using the set command, told me that I had no access to the registry. I have administrator privileges and it's my computer, as far as I know that I am the only person who uses it, and I have no guest account, I cannot access the registry key. I don't want to stop user access control. You have any ideas?

  Hello

  Please take a look at response Pegasus in the following thread replied:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/access-denied-setting-owner-andor-permissions-on/71cdd66a-75Ce-4E79-BACE-89637e0dacae

• restrict access to the php page problems

  I'm trying to use the dreamweaver php restrict access server behavior and will have success on both my local maching and my own host. However, the same script does not work on the server of a customer hosted by Verio on a Windows shared hosting plan.
  
  index.php = login page
  Login.php = forwarding connection failed
  client.php = page with a script to restrict access.
  
  If I remove the script of restricted access, I was able to connect fine and see page client.php. However, if I understand the access restricted in the client.php script, I get kicked to the login.php page. I only check the username and password, not the user level.
  
  Here is a brief overview of the two assemblies
  
  localhost:
  MacBook pro running apache
  PHP 5.2.0, mysql 5.0.22
  register_globals = Off
  
  Client server:
  Host = verio
  Windows shared hosting plan
  PHP 5.2.0, mysql 5.0.24a
  register_globals = Off
  
  Session settings are the same as the file phpinfo.php (with the exception of the local value of the session.save_path to the verio server)
  
  I can return the value of the username (and pass) using the {print $_SESSION ['MM_Username'] ;} on client.php page when I comment on the script to access restricted on the client files.}
  
  I wonder if there is a php setting that is causing the problem?
  
  Any help is greatly appreciated.
  
  Kind regards
  
  Mike
  

  According to media, the current windows has limited hosting plan supports for php scripts.

• Windows 7 - access to the file permission problems

  I have a new laptop of Dell M4700 with Windows 7 64-bit, and file access permissions are create chaos.

  When I open a file for editing, the computer only wants to save - under a different file name, not simply to save the existing file.  This occurs in Notepad and several other programs.  It's the same thing that hit the button "save under" instead of simply register.

  Several times at the opening of files, in particular on external drives, the file will only open read-only.  I can copy the file to the local hard drive, and it works normally.

  So far, I tried the following:

  • I have administrator rights.
  • I went through and all the property of the files changed for me.
  • Make the read-only attributes of course removed
  • Run programs as an administrator
  Any help to resolve this would be greatly appreciated.

  Looks like you don't have permission in writing to these files.

  To resolve or explain it, you look at the permissions on the file/folder and they are explicitly defined or inherited from the parent folder (or higher).  When it comes to permissions, administrators are users like everyone else.  Directors may be refused or permissons to files or folders like any other user.  Even the file owner can change permissions such as he is denied access to its own folder.  The only advantage that owners and managers have is permission to change permissions.

  You need view the permissions currently in effect for that file.  Usually, this is done:

  Right click on the file / folder-> properties-> tab 'security '.

  At the top will be list users and groups with permissions and if you click on it, the bottom window displays their permissions.   Learn more about this everything is there:

  "Together, see, change, or remove permissions on an object.

  <>http://TechNet.Microsoft.com/en-us/library/cc731667.aspx >

  This will lead to other links which provides information on how to set permissions.

  HTH,

  JW

• Union access to the CF query - problem

  I have a query in ACCESS below, it works fine...
  
  QueryName is test
  
  But when I query in CF using this query
  < name cfquery = 'abc '.
  DataSource = "abcde" >
  SELECT *.
  OF the test
  < / cfquery >
  
  I get error running database query.
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Too few parameters. 1 expected.
  
  Why doesn't CF run my access query and return my results
  
  -ACCESS QUERY STARTS HERE - I get the results in ACCESS-
  SELECT ID, r_muai_scale, i_muai_scale, gid, gidcounter, SSN, FIPS, csa_open_date, csa_close_date, r_muai_date, r_muai_tot_domain_score, i_muai_date, i_muai_tot_domain_score, service_type, service_begin_date, service_expect_end_date, service_end_date, expend_amount, projected_expend_amount, export_fyqtr, (expend_amount + projected_expend_amount) AS totalexpenditures, ((DateDiff ("d" service_begin_date (((, service_end_date)) + 1).
  As totalservicedaysfy06
  OF master_data06
  WHERE export_fyqtr = 20064 AND service_end_date IS NOT NULL AND service_begin_date > # #06/30/2005
  UNION
  SELECT ID, r_muai_scale, i_muai_scale, gid, gidcounter, SSN, FIPS, csa_open_date, csa_close_date, r_muai_date, r_muai_tot_domain_score, i_muai_date, i_muai_tot_domain_score, service_type, service_begin_date, service_expect_end_date, service_end_date, expend_amount, projected_expend_amount, export_fyqtr, (expend_amount + projected_expend_amount) AS totalexpenditures, (DateDiff ("d" #06/30/2005 #)) (, service_end_date))
  As totalservicedaysfy06
  OF master_data06
  WHERE export_fyqtr = 20064 AND service_end_date IS NOT NULL AND service_begin_date < = # #06/30/2005
  UNION
  SELECT ID, r_muai_scale, i_muai_scale, gid, gidcounter, SSN, FIPS, csa_open_date, csa_close_date, r_muai_date, r_muai_tot_domain_score, i_muai_date, i_muai_tot_domain_score, service_type, service_begin_date, service_expect_end_date, service_end_date, expend_amount, projected_expend_amount, export_fyqtr, (expend_amount + projected_expend_amount) AS totalexpenditures, (DateDiff ("d" #06/30/2005 #)) ((, #06/30/2006 #))
  As totalservicedaysfy06
  OF master_data06
  WHERE export_fyqtr = 20064 AND service_end_date IS NULL AND service_begin_date < = # #06/30/2005
  UNION SELECT ID, r_muai_scale, i_muai_scale, gid, gidcounter, SSN, FIPS, csa_open_date, csa_close_date, r_muai_date, r_muai_tot_domain_score, i_muai_date, i_muai_tot_domain_score, service_type, service_begin_date, service_expect_end_date, service_end_date, expend_amount, projected_expend_amount, export_fyqtr, (expend_amount + projected_expend_amount) AS totalexpenditures , ((DateDiff ("d", service_begin_date, #06/30/2006 #)) + 1).
  As totalservicedaysfy06
  OF master_data06
  WHERE export_fyqtr = 20064 AND service_end_date IS NULL AND service_begin_date > #06/30/2005 #;
  

  Replace the double quotes in your function DateDiff autour did ' parameter with single quotes. Also, if export_fyqtr is actually a type of text rather than digital data, try single quotes around '20064' = export_fyqtr.

  Phil

• I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).

  network adapter AutoDetect fails

  Hello:

  I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).
  Using the command ipconfig, I found that these cards are not detected. (Although without wireless/LAN icons do not display the modem connection). Also, if I go into Device Manager, I see network cards. BUT if I select "research material changes", then the other adapters will appear (those of Privacyware) and internet connection is reset and it will work then.  I wonder why windows does not detect this kind of cards automatically when I start it.

  This problem occurs only in my laptop - I installed the project Feederwatch on a laptop another XP and it worked, so Privacyware cannot provide a solution, since seems a very specific problem.

  Thanks for any idea!

  Seems that the solution was:

  1 - Open Device manager and view the hidden devices.
  2. then go into not connectable & play devices and manually delete all the remainers network software & security uninstalled (process antivirus, firewall, monitor).
  3. several reboots were required in order to know if the garbage problem has been removed.

• Internal access to the site at the remote location via wifi

  We have an internal site to A location and we have a 2 layer hose B location. When you use the ethernet connection, site B can access the site. What we want to do, is allow them to access via wifi with the VPN site to site (who currently works) hosted by of our Sonicwall.

  How this is a problem is our network is separate; wifi at site B is on the DMZ. We added access rules to allow the DMZ-> VPN traffic on the site, which did not work; No ping, no traffic, no communication. We've also added policy NAT, same story.

  My theory on why it does not work is because the VPN tunnel to one SW to another is related to X 0, but even after enabling access, it's the same result.

  Any help would be appreciated. Thank you all!

  Hello

  Is DMZ subnet to site B added under 'Local networks' VPN B Site and under 'Remote Networks' policy in Site A VPN policy? If you have then SonicWALL auto-créera access rules to allow WiFi traffic. Basically, you need to add the DMZ subnet in site B the VPN policy.

  You can also see the article: https://support.software.dell.com/kb/sw7725

  #IWork4Dell

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Access to the eccentric camera and GPS problem

  I love this phone and use it for a few weeks now. I know that the update just worked for T-mobile, and the biggest problem he treats is the camera. My question is if anyone knows if this update fixes other issues?

  One of them is how he takes the X bike to pin point its location. I know that most of the Android phones are simply not very fast when it comes to this, but this phone takes more time than many other phones I've used (most recently a HTC One).

  Another problem is, like many of us, I take lots of photos, and access to the camera can be tricky. I like to review my photos before I quit the application. Later if I want to go in the camera app, it brings me to the last image I tested, instead of the camera. Very well, but when I swipe to the left to reach the camera, he leaves the app. Also the camera icon on the bar above the image is missing, so I can't easily access the camera.

  Is the application gallary your default program for image manipulation? This happened to me when I made the default handler quickpic.

• Problem: Access to the database.

  Hello.

  I have a problem with my NI Multisim 12 (Student Edition). It installs correctly and correct registry also, but when I run the program it displays these messages

  "Problem: access to the database."

  The data are not available. Functions using the database will be unavailable. »

  And similarly for the database and database user.

  In the end, it shows this message:

  "Multisim has detected that the main database is not on the current user. Reinstall the program from the original media. »

  I have the original of 2012 Labview and Multisim 11 (from a myDaq) media.
  After that, I can place any component because the program cannot access data bases. I can open previous designs, but it is not properly simulate.

  I am the only user of the computer, and I am the administrator.
  I have a 64-bit Win7 with Core 2Duo 3 GHz.
  I recently installed Labview 2012, which includes this software, so I uninstalled previous Multisim.

  On the same computer without any problem, I used Mutisim 11. I tried to reinstall Mutisim 11, Mutisim 12, delete windows registry, remove files after installation, giving permission for all files and nothing works. Whenever I have reinstall Multisim it displays these messages.

  Please, help me!
  Any help, or anyone with this problem or similar, let me know also.

  Thank you!!!

  Once again, many thanks. I solved the problem just now. I need to change the windows registry, following the instructions in the link. Thank you
  PD: Do not use Ultralibrarian unless you have a non-free license! hehe.

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• WVC210 DYDNS AND PROBLEMS WITH ACCESS TO THE WEB

  I have 2 Configuration for WVC210 cameras on dydns of deleted I can't see them on the web. I can access via the local network using the ip address and port or the dyndns name and port. The router has listed as a virtual server and I even put one of them is like DNZ (outside the firewall of the router), the port check tools show a port opened from a remote location. And I can ping. But I can't connect to the camera. Also, I was able to view a WVC54GCA camera with the same configuration. Any ideas?

  I can get both of these cameras no problem... just not able to connect but the login box comes right to the top as soon as I hit him enter after you put the URL...

• Problems of access to the files of user account after the change of password

  I forgot the password of a user rarely used account, so I changed the password as an administrator.

  I can now get access to the account, but the only problem is that all files seem to be empty.

  Is it possible that I can get access to the original files?

  Hi Carol and John Winter,

  1. What are the files you are trying to access?
  2. how exactly you are trying to access these files?
  3 is confined to a specific folder?
   
  Check what is the file size by following the steps mentioned below:
  1. right click on the folder and click Properties.
  2. check if the file size is 0, if it is 0, this means that the folder is empty.
   
  It can also be a problem with permissions.
   
  Check out the following link and check.
  What are the permissions?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
   
  Hope this information helps.