UNIT III NTSC TANDBERG camera cable pinout

Similar Questions

• How to extend HDMI on Cisco TV presence Codec C60 camera cable

  Hello everyone.

  I need to know how we can extend the camera HDMI cable and the control of camera d-SUB/RJ45 cable up to 50 m.

  We know that HDMI cab be extended to aid commercial Extender HDMI, but we do not know if the C60 uses standard HDMI signal. and what about the control cable. ?

  C60.PNG

  

  You can use any standard HDMI extender to extend HDMI video cable.

  For camera control cable, you can make your own cable from camera to extend existing or just cable one as long as you need. See the camera cable pinout scheme in the PrecisionHDMC camera Guide on pg 17. If the camera cable is more than 5 meters, the unit must be plugged into a power supply for camera (PSU-CAM-V =), as the time is too long for the codec to power the camera.

• C20 and SX20 camera cable

  Hello

  Can I use the same camera C20 on the SX20 camera cable?

  Concerning

  Leonardo Santana

  Hello Leonardo

  Series SX 20 and C use different connections for cameras, it's not possible using the supplied cable.

  Please visit this link:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/camera/precisionhd/user_guide/precisionhd_1080p-720p_camera_user_guide.PDF

  Thank you

  Rafal

• EqualLogic PS series console RJ45 cable pinout

  Hello world

  I have an Equallogic storage array to use for the test which I believe is a ps100e, with two controllers blue sata ports having back series RJ45. Nothing I've used so far has had any kind of traffic from them, then someone can help me with a pinout of the console cable that was included with the devices? (I got was the machine itself). I saw a few summaries puts online buy them, but I'm a bit of a hurry and don't have much of a budget, so I was hoping to do so they are considered non-standard.

  Thank you!

  Here is the pinout settings and baud.   Make sure that this flowcontrol is disabled on the serial port.

  We find this info on the site Web of Equallogic.

  The title of the solution

  Cable to the serial Console, identifying Type I, II controllers, the RJ-45 connector pinout

  Details of the solution

  Type 1:

  FRU PN IS 95-0444. Cable 'dongle' will have a white label with 51-0003-02 marked top. It is 10 inches long, black, with DB - 9 (M) money and a micro DB-9 at the other end.

  You can order the dongle as a Molex 83421-9052 reference number to search on google. You will also need to a modem cable Null to go with it, if you don't have one, easy to find, even the most Radio Shack has them.

  Type 2:

  FRU PN 95-0517. Cable will have a white label with 51-0008 marked top. It is 10 feet long, black with the RJ-45 at the other end and a DB-9 (F)

  Here is the pinout of the connector RJ-45 series of EqualLogic Type-2 (SATA 2 command Module):

  1 - DTR (out)

  2 - CTS (en)

  3 - chassis Gnd

  4 - RxD (in)

  5 - TxD (out)

  6 Sig Gnd

  7 - RTS (out)

  8 - DSR (en)

  In the current firmware versions we do not deliberately set, or answer, the control signals (DTR, CTS, DSR, RTS), then you must either configure the device you connect so that it ignores them, or provide telesignalisations the according to the needs.

  The series settings are: 9600 baud, 8 bits, 1 stop bit, no parity, no flow control.

• Samsung SC D375 (NTSC) video camera device...

  Preciso de um software me Permite capture os videos ali registers, e me Permite realize edicoes.

  Grato

  Hi Miguel,.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Need help - camera not connected in Tandberg 6000 MXP

  Hello

  After connection to the tandberg 6000 mxp codec HD camera, I get message camera not connected.

  There is no speicial cable to this code? and what is the axis of the s-video on the codec that mark as "'primary' cam?

  Thanks in advance

  Shy

  Camera cable aboard MXP is similar, but it does not work with 6000 MXP codecs. I assume that your cable is marked with C3000 (works only with Edsge and 3000 MXP codecs). You need the cable marked with C6000. I don't know the SKU of CISCO for this cable. It may help you reference TANDBERG:

  115420 camera HD t6000s cable, 2 m

  115421 camera HD t6000s cable, 5 m

  I hope this help you!

• C40 Camera control maximum length of cable RJ45 to d - SUB

  Hello

  What is the maximum cable length for the control of camera on a Cisco C40 port?

  Thank you

  Kyle

  According to the PrecisionHDMC camera Guide, page 17, the camera cables that usually come with codecs can be 5, 6.5, or up to 20 meters.  Anything more than 5 meters requires the camera powered by the power of the camera and not the codec using the camera control cable itself.

  I have a few installs custom where the camera control cable is well up to 75-100 feet.  Just follow the outputs pins on the same page as above to make your own cable and don't forget to use the POWER-CAM-V = power supply to power the device.

• TouchSmart 520: Camera not recognized

  I had my Touchsmart for 2 or 3 years now and have always used with Google Photos (Picasa) for edit and download. I first used a Canon EOS 400 d and a couple of years, upgraded to a 7 d. All were working well.

  Last week, I returned from vacation with about 1,000 pictures on my camera and my Touchsmart plugged the cable of the camera as usual, but it does not recognize the camera. She did little to sound a device makes when something plug into a USB port, but would not see the camera. I looked in the Device Manager to see if all the indicators showed ofr questions USB, none was.

  I restarted the Touchsmart, always the same. I removed the two external HARD disks always the same so that the camera was the only thing that connected, I tried the camera cable in all 6 USB ports, the same. I tried another cable, the same thing. I then tried a card reader with the CF in this document card, initially the same. Then I had some weird problems with the PC it recognized as an external drive but showing some strange characters in the view, but as soon as I tried to access the missing drive.

  I looked to see if there was a specific driver for the 7 d, but there is not, then I downloaded the Canon EOS s/w utility and tried to see if that recognizes the camera but it didn't.

  I jumped, then the CF card in the camera to find that the camera now showed the map in a vacuum; You can imagine how I felt thinking I had lost 7 days of vacation photos! I tried on the Touchsmart once again and it was the same thing, so I took a few pictures and they have now read on the camera but it was all that was there. I accepted that I had lost all.

  Last resort, I plugged the camera on Asus laptop, W8 for my wife and it recognized the camera and I downloaded on his laptop, then used a HARD drive them to get to the mines.

  I then formatted the card in my camera and tried CF in the Touchsmart, still does not recognize it. So, I ordered a new card see That happened today, I took some pictures in the garden, plugged the camera on the Touchsmart and you guessed it, he still does not recognize. I tried to plug in the card reader and it shows up as an external drive, but as soon as I plug the inside CF card, it is the view.

  Therefore, I hope that someone out there can help as I don't want to have to go through the process of loading on my wife's cell phone photos, copy them to a HARD drive, and then loading them on my Touchsmart whenever I have to deal with pictures.

  Hi again botty1963,

  Thanks for the quick response!

  Because your computer is not able to recognize the camera from a previous restore point, please call our technical support at 800-474-6836 for your desktop computer repair options. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  I hope this helps!
  
  Concerning

• Video output Qosimio G20 S problem - NTSC TV

  Hi all

  I have a Qosmio G20-110, bought in the United Kingdom and problems of video output via the S-video cable to a flat TV in US I have the image but it rolls down very quickly. When he does that, I played video clips AVI on windows media player. I followed the Nvidia Setup program to get the result on portable computer LCD screen and tv screen synchronized, and that's ok, except for the picture of rolling. I don't know if there is a problem with the NTSC output - is this still a problem when watching digital videos on your laptop? - or if it's a different kind of problem. Any advice much appreciated.

  BTW, I read elsewhere on the forum that the media center TV works in the country of purchase - not the case with my laptop, I've watched television successfully both in the United Kingdom (PAL system) and the United States (NTSC system).

  Is it possible to check or change the type of output via s video cable?

  Hello

  I have no experience with a standard NTSC TV but AFAIK the PAL signal supports 50 Hz and supports the NTSC 60 Hz signal.
  Maybe it has something to do with your problem.

  You will find the detailed description:
  http://en.Wikipedia.org/wiki/NTSC

  However, in your case I would recommend BISO settings.
  In many of the BIOS version, you can pass the video parameters between NTCS and PAL.

  PS: I recommend you to test the video output also on different TV s to make sure this isn't a TV related issue.

  Good luck

• Cannot download pictures from the digital camera

  I was download some pictures from my digital camera to my computer today.  Until today, I was download on another computer, running Linux, without any problem.  Today, I installed the software on my Windows Vista laptop and downloaded some pictures very well.  Later, I took a few more photos, but when I plugged the USB cable, nothing happened.  Nothing has been detected on the computer, not even a message saying that nothing has been detected.  So, I tried to connect the unit to the Linux computer, and the same thing happened.  Is this a problem with the USB, the camera cable or computers?  Any help would be appreciated.

  Thank you!

  It is certainly possible that you might have a hardware problem...

  If you happen to have a USB media player... try to insert your memory
  card in it.

  Can't help you with Linux but on your Vista machine... maybe you need to
  Adjust your AutoPlay settings:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• Import and delete the photos from the camera

  The link you gave is not useful. I don't want to use the application Windows 8 photos. All I want to do is to plug my camera and have pictures, transfer in a folder of my title and delete the photo from my camera. It's an ability that were available in Windows 7 and not available in Windows 8. I am currently using Dropbox and it is slow and uses tons of data to my hotspot.

  Thank you!

  Split from: https://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/importing-and-erasing-photos-from-camera/d8ad55da-66e7-46d5-b54e-3ef0bf45e986

  Hello Joe,

  Thanks for posting your query in Microsoft Community.

  I understand that you have questions, import and delete the photos from the camera. We are happy to help you in the matter of fixing.

  You can check the below link to import photos from the camera.

  1. First, connect your digital camera, and press the Power On button. Windows 8, which will detect the camera and will install the appropriate drivers.
  2. After the driver installation is complete, the AutoPlay menu appears.
  3. Select the option import pictures using Windows.
  4. In the lower right corner of the screen, a small window asking if you want to mark photos will appear. You can type a general images you want to import. Tags can be very useful to organize and find your photos.
  5. If you do not want to insert a tag just leave this space empty and click Import.
  6. If you want to customize the import settings, click the Options button. Now you can change the following settings: where pictures import them (the default folder is pictures - if you want another folder, click Browse and select or create this folder), the name of the folder (by default the name of the folder will be the date when the images are imported over the tag you entered) and the file naming convention.
  7. When you are finished, click the OK button. These settings apply to all the photos you want to import in the future.
  8. After you click import, Windows 8 starts to move all your photos.  If you want the pictures to be removed from your camera once the import process is completed, click the Delete after import check box.
  9. Once the process is complete, start Windows Photo Gallery and you will be able to see all the photos that have been imported.
  10. Now, turn your unit off and unplug the cable to connect to your PC.

  If this does not help then, try the steps below to get the images from the camera.

  1. Go in computer.
  2. You will find the camera under portable device or removable devices.
  3. Double-click on this unit and you can copy and paste from this location and import it onto your computer.

  I hope this helps. Otherwise, feel free to write us back for assistance.

• Thinking of upgrading the camera, but with different fps: problems?

  

  In collaboration with prepro and After Effects CS6

  I have a Panasonic HDC SD90, which is a low end 1080 p camera shooting at 59.97 fps. It is very fragile to Zoom and the meter is not stable and give me the fluctuating levels of exposure. Costco has a sale on this:

  WHAT JVC GC-PX100 is a bonus in the form of digital SLR style camcorder.

  http://www.Trustedreviews.com/JVC-GC-px100_Camcorder_review

  The MOV format provides the best quality, offering a rate of 40Mbits/s for the Full HD at 50 frames per second progressive, thereby 4Mbits/s used by audio LPCM. You can enter the same resolution and the pace in MP4 format to 36Mbits/s, while AVHD this offer only 28Mbits/s, which is the AVCHD 2.0 standard. The iFrame option is 720 p at 25 fps and a healthy 36Mbits/sec.

  More about http://www.trustedreviews.com/jvc-gc-px100_Camcorder_review#i6Ya0K3bd7eatHE6.99

  Challenges in PrPro and AE could I face with images at the same time? If I want to set up multiple cameras on a shoot I'm begging trouble by continuing to use the Panasonic or buying a camera that is not 59,97 fps.

  Thanks in advance for any input.

  The f
  

  Hi Jeff,

  Which country are you? The article you are looking for to seems to be a 'PAL' model, offering 25 and 50 fps shooting modes. In the United States, NTSC will be 60 or 30 (29.97) frames per second (59.94).

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Male F/W adapter/cable Thunderbolt or alternative

  Need a solution to copy files from my Mac Pro 2006 1.1 (OS X 10.7.5) on my end 2015 Refurb Thunderbolt Apple iMac. 10.7.5 is not do and cannot, by Apple's Support. Something other than burning files on disks. I have seen FireWire adapters are female to male. m - m need to go from one computer to the other. Information system States FW bus/built in the hub is up to 800 Mb/s; Unknown device is up to 400 Mbps. thanks in advance!

  There are three FireWire cables:

  FireWire-400 regular are six PIN to 6-pin

  Are cables FireWire 800 9-pin to 9-pin (and a different shape)

  the camera cables are Firewire-400 without power cables, so that they are four pins to four pins.

  to convert almost anything to anything, just buy the cables with the right plugs and the cable automatically performs the conversions. Or you can buy an adapter and use a standard cable, if you prefer. There is no electronics in the adapter - it has just two different connectors on it...

• Satellite M30X-102: power question - unit suddenly turn off

  Hello!

  I have a portable Satellite M30X-102 and about a year ago and a half months he started to turn off suddenly. First of all, it looked like an overheating problem, but also disabled directly after that I pressed the power button and sometimes it worked 10 hours without any problem, also, when it is off, power LED was flashing until I have Nations United - and replugend the power cable. If the battery was, he was immediately released.

  I sent it to repairs. They only cleaned the cooler and changed the dough to thermal conductivity and for a few days, the laptop worked normally, but about half hours ago, it happened again. I am convinced now that this is a power supply problem, possibly the power cable.

  You have any suggestions of what I could do, or should I send it back with a note that it is a power supply problem?

  Thank you

  [Edited by: admin March 23 06 06:56]

  Hello

  In my opinion, you should contact the service because it can start diagnostic tests.
  For me, this looks like an electronic malfunction of power supply.
  If the laptop has been repaired it there a few days/weeks, so I guess that the guarantee is valid.

• IdeaPad Y500 does not detect the camera

  Hello everyone!

  I had my Y500 for about 1.5 years and I can't use the camera more. The computer does not detect the camera and when I downloaded and installed the camera software the computer shows me "no approperiate driver to install! I tried to uninstall the camera driver and reinstall it again, but it's the same problem.

  I would appreciate a quick response

  The problem was with the camera and the camera cable. I sent my computer to
  Lenovo and they fixed.