Units XP media center pc w / MCE error Code 00000002

Similar Questions

• Cannot install sp3 on xp media center edition. 0x87FF054F error code

  I tried to install XP SP3 and receive an internal error message. Next, I get the error message that it could not install. Any help would be appreciated.

  Hi greenleaf2976,

  You can check if this article helps.

  How to troubleshoot an installation fails on Windows XP Service Pack 3

• Fix it Center does not open error code 0 x 80092003

  Fix it Center does not open error code 0 x 80092003

  Hello Evertonia,.

  If this happens with a fixit tool, then you will need to request support via the link given by Diana D.

  Best regards

  Matthew_Ha

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• Qosmio G20 - Microsoft Media Center Edition - ehExtHost.exe error

  I started having errors on my Qosmio G20 ehExtHost.exe when pass the screen of Media Center edition to record a television show.

  Language Runtime Debugging current Service ID = 0x17d4 (6100) and id = 0 x 138 (312)

  I have a glance on the web and found a few comments about Norton screwing of the NETWORK settings, I've just updated Norton Internet Security 2009 version so it's possible.

  I have also a message with something not being able to connect to Windows Messenger so don't know why it would.

  I recorded a program and it's OK when I played it back.

  Anyone has any ideas how to solve this problem (or problems)?

  MB

  Googling around you can find so many reports about this. I also found an interesting article on this subject. Please check it out. Maybe it will help you to solve this problem.

  How to solve the ehExtHost accidents that may occur during the launch of Media Center?

• HP slimline s3120n-Windows Media Center - Tuner not installed error

  Media Center does not. Tuner not installed message! Help!

  I have a hp slimline s3120n. I got probably around January. Ive been watching TV on it with a card of A 48, 3 ViXS Pure TV - U. recently, then do not install anything I turned it on and got an error from the center of media saying "Tuner not installed" I tried all the things on the hp support Web site
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01187871&lang=en

  I have also a windows server backup from my computer. I restored my computer to a point where the computer work and it didn't work. I looked everywhere on the internet and you can find a lot of people with the same problems, but not answers

  my card is displayed as working on Device Manager too so it must be a software problem.
  im running windows vista 32 bit
  I have tried reinstalling drivers did not work, tried to remove the map and back does not work

  I have HP slimline is now Windows 7 and Vista. When I upgraded to Windows 7, I did not go off Homegroup. My Vixs tuner worked fine for 2 years. Recently, may 2011, I decided to start the homegroup; What a mistake!

  My Media Center said that I had no TV tuner.
  After much research, I found this solution.
  In windows 7 go to "Administrative Tools" and launch 'Services '.
  Scroll down to "Windows Media Center Receiver Service" and under "connect as" column, make sure that setting is 'Local System' and not 'Network Service '. The "Startup Type" value in the manual. not automatic.
  This fixed my issue.

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Netflix search works is not in error of Windows Media Center (windows 8 pro) "error message"No internet connection"

  Separated from this thread.

  The installation is successful, in my case; However, when I try to use the function search I get an error message 'No internet connection' and close the search window.

  As this solution is supposed to be a local, I am at a loss as to what is happening. Streaming movies works btw, so I don't have an Internet connection available and functional.

  Any help would be appreciated, thanks!

  Edit: I have Media Center running on Windows 8 Pro.

  Hi Florian.

  I appreciate if you could help us with more information.

  1. You can use search Netflix when you connect using a web browser?

  2. Is the Windows Media Center works correctly and can access the Internet other than with Netflix?

  If the problem is with Netflix Media Center User Interface, it is supported by Netflix.
  Go to http://www.netflix.com/help and post your question.

  It will be useful.

• Media center and netflix script errors

  I have windows 8 pro 64-bit. When you try to play a movie in netflix, I get a script error. http://cdn1.nflxext.com/FilePackageGetter/sharedSystem/pkg-pages/player/wiplayer-a03fc0a08c000004a00000000100000000000000000208000000000000000 with another error. Any ideas?

  I am able to watch netflix with the netflix app that I downloaded from the windows store. I am also able to watch if I go to the website of netflix with google chrome. If I try to watch netflix on internet explore, he told me that I have to download silverlight. I had disabled extensions so I activated silverlight and can view netflix in Solution Explorer. I always get the error in windows media center. I have all the windows updates. I have Zone Alarm as a firewall and silverlight is approved.

  FIXED
  I had finally run. I clicked on find and fix problems with the devices in the settings and it fixed itself. This may help someone else in the future

• units Windows media center update the site saying "We could not process your order."

  I am trying to get a product key for the media center upgrade to windows 8 pro. I have two computers that I have upgraded to Windows 8 pro, so I used two different emails. The first computer I've updated went well, I asked for the key and a few days later he appeared in my Inbox, and I upgraded without problem. I asked a product key for the second computer (with a different email) more than a week and it never came, so I tried again and any email you enter on the site, it says "We could not process your order." Unfortunately, I tried the first product on the second computer key and allowed me to upgrade. The only problem is, I got a screen that says product key is already in use, and now my computer asks me to activate windows all the time. As far as I know, there is no way to fix it without the product key. I can't even return to regular windows 8 pro with a clean install, because I downloaded windows 8 pro without a disk.

  Hi all

  You may reach the Service the customer to know that you run in here. You can find information about this for your region below:

  United States: 1-800-Microsoft (642-7676)

  Canada: + 1 877 568 2495

  Comprehensive list of phone numbers can be found here.

  Sincerely,

  Marilyn

• Windows Media Center 'No signal' or error "check antenna".

  Original title: media center have a connected camera and was running fine and now it isa blue screen is says no tv for channel 3 signal which was the channel along the... can you please help me understand how to solve... Thank you

  my camera that passes through my media center to windows was working fine on channel 3. now, it's a blue screen that says no signal check antenna... It has been like that for 3 days... suggestions? Thank you

  Hey busdriverrocks,

  There are some suggestions in the help article below that can help you with this problem. Please go through the article to get the procedure.

  Solve problems with watching TV on your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my xp media center 2005 gives an error "the video decoder is currentley in progress for use by another application"

  my xp media center 2005.

  whenever I try to use my media center ' video decoder is currentley in use by another application close all applications and restart the Media Center»

  I have no other programs running and have no idea what as happened to create this problem

  Suggestions: -.

  1] uninstall and reinstall the video decoder.

  If the above does not help, then

  2] uninstall and reinstall the tv tuner card driver. Visit the manufacturer's Web site to download and install the latest compatible driver.

• Units Windows media center has stopped working

  My media center was doing very well until about 2 weeks ago. Now every time I turn it on it says the program has encountered a problem and stopped working. What should I do?

  Hello Jlamb,

  I regret that no one has followed on your problem. I found an MS Knowledgebase article that deals with your particular problem and you have either Microsoft solves the problem, or you can do it yourself by following the instructions in the manual. Click on the following link:

  http://support.Microsoft.com/default.aspx/KB/947464

  I hope this helps you with your problem. Please let us know how it works!

  Dave D
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Live365 program plays more stations in Windows Media Center (the two MCE 2005 on XP and Vista Home Premium version).

  When you select any Live365 station, just have a beep. Three different computers with the same problem (XP and Vista). However, all 3 have IE8 with the same default security settings. I also contacted Live365 support for the resolution and waiting for their response. Live365 is working on other media, just not Windows Media Center PC or extender readers.

  Thought I'd share some good news, instead of a few problems.

  A month ago, Live 365 in Windows Media Center started working again on all my computers (Vista and XP). Don't know if it's a windows update, or an update of the app live365. But whatever the fix was, thank YOU!

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.