"Unity_SERVERNAME" running under a service account

Similar Questions

• Is there a way to Illustrator CS6 run under a standard account of Windows XP?

  I spoke with Support Adobe by phone and the only answer I could get was that Illustrator must be run under an administrator account.

  For those who are interested to help understand it:

  It is installed on a corporate network, for this purpose distributing of privledges admin is not the preferred solution. I have a privilege Manager that allows the directories and the files and folders within a period to be executed with administrative privleges so I thought with C:\Program Files\Adobe\, C:\Program Files\Common Files\Adobe\ and C:\Documents and Settings\ < USER > \Application Data\Adobe\ all allowed to run high that might work. Unfortunately what he did not.

  After further review, I noticed that when I try and run as long as Illustrator, Illustrator.exe will start under this user name of users, but only for a few seconds and then end with no error or an event in the event log. However if I do a runas and use credentials, Illustrator.exe works as SYSTEM and opens perfectly fine.

  No matter which ever race in this or have any suggestions?

  Thanks advance.

  It worked, but after checking on a new installation, I have concluded that the previous installations of CS3 and CS5 are causing the problem. Redefinition of the PC solved the problem.

• Troubleshooting slow running under a user account from Win7 machine and normally with the other user accounts on same (or other) third-party app

  Hoping that this is not too off-topic, but I'm really running out of ideas...

  I have this trading program full license (TMPGEnc MPEG Smart Renderer 4.2) who has worked on my Win7/64 for several months, and in recent weeks, has become excruciatingly slow for every user interaction (but not for real computing), making it essentially unusable (1'30 to launch vs 3 normally, 30 "seconds waiting to launch a 'new project' vs.)<1s normally,="">

  When 'pending' launch application or respond to a command, 12% of the full CPU (8 logical cores on CPU Core i7 third Gen) is used by a single process: the offending application (look at the Task Manager, 1 logical core is used to +/-80%, a second for about 15% of this process). All other processes are still at 0% CPU usage.

  Of course, I tried & tested many things including full-/ re-installation of the application with a careful cleaning etc., corresponding registry entries software disabling AV (Avira free), .net Framework Repair Tool, etc... no change! The disc has been checked and is OK.

  Some interesting tips:

  This app worked fine for several months before the problem started abruptly a few weeks; I tried to uninstall .net Framework 4.5 updates to a date prior to the date of beginning of apparent problem, does not; I came back to an earlier version of the offending software: no change.

  But the most interesting observation is that the app works well at the launch of any other user account on the same machine Win7/64 (whether with the normal credentials or admin), so for me that means there should be no conflict of software on the computer, only something in my profile of the main user who causes the app behave so slowly.

  At this point, the Helpdesk of the seller looks distraught - too.

  Suggestions for troubleshooting?

  BTW: I consider that this computer is well managed, and no rogue or untrusted app sleeps there. my main profile is fairly heavily customized for my work, so I want to avoid workaround last resort would be to create a new user account as work environment main (besides the fact that I hate not to find the root cause of the problem)

  Hello

  Given that this problem is specific to the user's profile. I suspect that some programs that are installed or some settings in the profile translates into this problem. You can fix a corrupted user profile by following the steps in this article:

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  I hope this helps.

• Why I can't download service pack 3 for windos XP, I'm running under the account HP_Administrator supposingly?

  I need to go to Service Pack 3 to run a new tax program, but windows update said I'm not Administrator ad.  I should add that I get error # 0x8DDD0002

  When you try to down load the service pack from 'Windows Update'.

  I need to go to Service Pack 3 to run a new tax program, but windows update said I'm not Administrator ad.

  Given that you do not specify this error message you receive, I guess you have found "Service Pack 3 Setup error. Access is denied. "since you mention that you run under the admin account.

  Download and install Service Pack 3 from HEREmanually. Save the file to your desktop. Double-click on the file and choose run. Make sure you disable any malware software and anti-virus first.

• 10 GB running under LocalSystem on Windows Server 2003 account

  Hello
  
  I have an Oracle 10 G database running on Windows Server 2003 SP2. I created the database and everything works fine, while the service is running under the local system account by default. However, when I change the user that the service is running in regards to a different account of the database starts and opens and I can log on as unreserved SYS using a connection but I'm unable to open a session any other user through the listener. The listener responds to TNSpings, and everything seems OK. When I turn it on to the local system user, yet once it all works very well.
  
  Can anyone offer advice or assistance?
  
  Thank you
  Rob

  It is probably because the listener is still running under the local system account. Have you tried changing the listener service runs under the same account as the Oracle service?

• other products EMP which runs under the user who installs the product

  Hello

  We have an EMP 11.1.2.1 installation on which we decided to install the Calc Manager. This server has Foundation, logic of web, planning and Reporting and analysis components. Then we reconfigured Workspace, GestionnaireCalc, and Shared Services.

  Initially our process would run under the SYSTEM account even if I start using my ID. After reconfigure it, the process of Foundation and GestionnaireCalc run aunder the user to launch the process. Rest of the process as planning still run under the system account. So when disconnect us from the Foundation and treated GestionnaireCalc gets killed.

  Also, in the task manager the name of the process not appears as java.exe instead of HyS9FoundationServices

  After looking around a bit, I found differences in the .properties file.

  New file after reconfig .properties:

  context = workspace

  interval = 5000

  validation. Context = Workspace/Status

  Checker = foundation

  Server.Name = FoundationServices0

  wait = true

  Domain.Location=E\:\\Oracle\\Middleware\\user_projects\\domains\\EPMSystem

  Server.port = 28080

  type = j2ee

  Timeout = 500000

  Softly.Depends = OHS

  * the host and admin url entries deleted

  Previous configuration file:

  name = HyS9FoundationServices

  context = workspace

  interval = 5000

  validation. Context = Workspace/Status

  Checker = foundation

  Server.Name = FoundationServices0

  wait = true

  Server.port = 28080

  type = service

  Timeout = 500000

  Softly.Depends = OHS

  * the host and admin url entries deleted

  Might help with any suggestions or pointers? Thank you.

  Kind regards

  Savio

  Seems you have deselected "Create Windows Services for configured components" under "Hyperion Foundation" > "configure common settings."

  Re-run Setup, select "Configure common settings" and "Deploy to the application server" under "Hyperion Foundation" and all the other web apps that have had the Starter changed properties, select "Create Windows Services for the configured components" and deploy web applications.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Help! Problem when running CF under a default service account

  I am running ColdFusion 9 with IIS 7 on Windows Server 2008.

  The CF application service runs under a domain request account rather than the local default.

  The problem is when you are so defective models keep an indefinitely open active query.

  Is it a permission setting, I may be missing to resolve this problem?

  Thanks for any help anyone can provide.

  Charlie, thank you very much for your answer.

  We had only to read/write permissions for the account on the coldfusion9 directory. After changing to full control, the problem has been resolved.  Charlie, thank you very much for your answer.

• Run the workflow as a service account

  Hello

  I'm trying to run a worklfow element in a larger workflow under a different name. Is this possible? I know that you can right click-> start workflow as a person, but it is a time for the entire workflow. I want to be able to run something as another user within the main workflow. If it is possible I can't understand it. I read that this was possible with the policies, but I could not understand this to be .

  Edit: just to give more details, I want to be able to run workflow "remove or disable ad of the computer by its name" as a service account. I have this workflow in a larger workflow decommissioning.

  Thank you!

  Chris

  If your secondary workflow is added as a "Nested" workflow, then you can adjust the "connection info" tab and specify credentials running for this item

• How to install a windows with different runas service account

  Hello
  I would like to ask, how can I change the account to connect to the course, I install the service. The default service account is localsystem. I would like to change in administrator or another account. The service needs to access the reader to share in the other server. If use the localsystem account, the service cannot access the network. someone has some idea for my case. I can't change it when it is installed, because I need to deploy the service of thousands of machines.

  Thank you
  Nicholas

  Hello

  1.) deploy the application on workstations
  2.) develop a batch script to automate the changing of credentials to services
  SC config obj = pass =

  You can use the administrator and the password admiistrator for the batch script.

  Don't forget to vote too useful for others and to accept the proposed response, if it is relevant build it KB in this Forum.

• How to force the msi to run under one account other than system deployment msi via gpo?

  Hello fellows,

  I'm deploying a bundled program msi via gpo. by default, msi is run with the system account on the client computers. but the program must be installed with a local administrator domain/admin account in order to work properly. I didn't find a way to assign this account to msi via gpo. can anyone share some experiences? In my view, that it is an unusual scenario.

  see you soon

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• Reset the 4255 with service account admin password?

  I have a 4255 with no Admin password work. However, I have a work service account password. Is there a way to connect on the orders of account and service number to unlock or reset the admin password?

  Hello

  You can use the service account to create a new password if the administrator password is lost.

  To reset the password through the root account, you can run the commands from the root below:

  To connect to the service account

  -bash - 2.05 b$ -.

  Password:

  -bash - 2.05 # passwd b! -Enter username Admin -!

  Change password for

  Enter the new password (minimum 5, maximum of 8 characters)

  Please use a combination of upper and lower case and numbers.

  Enter the new password:

  Re-type the password:

  Changed password.

  Hope that answers your query.

  Don't make any other changes to the sensor through the service except under the direction of TAC account.

  -Danny Shankar

• How to use the script "click menu item" command on a menu item for an application that runs under another user?

  Hey everyone, quick question...

  I am trying to run this script:

  say application "System events".

  say process of "iTunes."

  click on menu item "Start Station" from the menu 'Song' to menu bar item 'Song' in the menu bar 1

  end say

  end say

  
  

  
  

  The idea behind this is to start a song selected currently playing station. I know, it's not hard to do it manually, but I want to be able to do it without having to call the iTunes app to the front. Now, this script works for my own iTunes app, but I have a second instance of iTunes connecting the second user on my computer at home (User2), with its own separate library and account and all. script I have works fine for an instance of iTunes under my user account, but I can't figure out how to specify which instance of iTunes, I'd like the script to work on.

  
  

  
  

  
  

  I want to emphasize as an FYI that i use.

  
  

  the shell script "connection f User2 /Applications/iTunes.app/Contents/MacOS/iTunes > & - 2 > & - &" with administrator privileges

  -to open my second instance of iTunes as User2

  
  

  
  

  is there a way to change the "process"iTunes"to say" something like 'process 'unix ID' say' and have the ID for each respective instance of iTunes unix?

  
  

  Let me know if I do not make sense... Thanks in advance to anyone who can help

  
  

  
  

  
  

  
  

  
  

  You can target a process of application using various properties of system events, for example:

  tell application "System Events"
    tell first item of (get application processes whose unix id is 15174) -- or whatever id
      activate --> needed when using GUI scripting
      get properties
    end tell
  end tell
  

• Do I need to allocate a CAL for a service account?

  Hi, a small question hopefully.

  I have a large number of R2 2012 Windows servers running a variety of applications in all of our field.  What I was asking is do I need a CAL for each service account?  I understand that the calluses are either user or device, but have seen conflicting information on this subject.

  It would be good to have a definite answer if possible?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Is it possible to configure the same user for 500 systems that run under XP & Win7?

  Hello

  About 500 systems are run under Windows XP & Windows7, is it possible to use the same user for all 500 systems?

  Hi SupportRI,

  Windows Live family safety is no longer manages the accounts of children using Windows Live ID Windows Live ID on behalf of the child is essentially used for the feature of managing contacts (restrictions on the use of Hotmail and Messenger). Currently, parental control can manage Windows users; However, if you have already configured a Windows Live ID account before the update, it will be always available. You can see the thread below for more information.

  Where is the function of the safety Contact family management?

  If you intend to use Windows Live Family Safety for all users of 500 to restrict the Internet connection, please note that parental control does not restrict the Internet and Web sites. You also have the option in the list of content filtering Web to apply the rules to all users under the Family Safety.

  For more information on how you can install Windows Live Family Safety, please visit the link below.

  Protect your kids with parental controls

  Thank you!