Universal Library

Similar Questions

• Downloaded 8.0 and now can't access working library as it redirects to the proxy of my uni?

  After a series of accidents when the hotmail and gmail, I received a message to download Firefox Setup 8.0, which I finished yesterday. This solved my problems of e-mail. However, I have now tried to access my e-library work, but despite being on the right site with all the macros OK journal, when I click to go to the electronic library (which should give me), direct entry I find myself being diverted to the proxy of my University Library, which (of course) does not give me access to my library of work. I use Zotero, which helps to provide an answer to my problem. Any ideas how I can fix this problem?

  Thanks a lot for your answer. I will keep this in mind - I only checked to have downloaded Firefox Setup 8.0 (2) .exe (which I happened to find sitting in the toolbar, and it's not because I've been invited to download). This seems to have solved now redirect to a server incorrect proxy - the only thing that remains to be done is to find why I have a blank page when I get redirected to the correct e-library! I will contact the administrator of this site. Thanks again for your suggestion. I will certainly use it if I have more problems.

• My Satellite Z830-10J is extremely wobbly

  Since I started using my ultrabook, it's very wobbly.
  While I'm typing random texts he keeps flickering and it's incredibly annoying.

  Place a piece of paper under the angle front folded left solves the problem, but this isn't a stable solution.
  The strange thing is that the continuous problem occur, no matter where I use my ultrabook
  (this isn't on the surface I normally work, since he's been on hundreds of different tables at the University Library).

  At first, I thought I would get used to, but lately, I feel like hopping has been getting worse.

  How can I fix or can Toshiba fix this?

  What Satellite Z Ultrabook do you mean exactly?

  According to you the question:
  > How can I fix or can Toshiba fix this?

  Don t know if you can fix it, you can check if the flaps at the bottom of the device are placed correctly, but I think that if there is something wrong with the cover of s for laptop, the Toshiba service should check it out.

• Strange problem with navigation (MBA13, Yosemite)

  Hello!

  I got a MacBook Air13 (always on Yosemite 10.10.5) since almost a year and it was just fine until recently he started to do strange things with my Internet.

  First he started having problems with the speed but that has been done because of the crappy router. But now it opens only some pages (and it actually decently fast) such as Facebook, YouTube, Apple, and all Google services (and oddly enough my page of the University Library, so I crossed out of the conspiracy theory) but it just goes no further. It doesn't matter if I use Firefox or Safari.

  I tried to play with DNS and locations, clear cookies, thus freeing up space and all the usual stuff. Also checked the Internet connection, but that's fine. And I don't see anything that I did different than usual...

  Maybe someone has an idea what is the problem?

  D.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• The iterations data acquisition data record

  I'm doing some tests on some materials. My cycles configuration a relay to change a solenoid and im monitor pressure in time with a pressure sensor. I'd like to save these data say every 5 min so im not constantly processing and registration. I don't know what is the best approach, or what will work best.

  Im trying to write to the file of measure but can't operate the id of path as him. any help is appreciated

  to use this vi, you'll need drivers/libraries for my relay and acquisition of data that are too large to load so I have attached links. otherwise a different vi just simulating a signal could achieve the same function

  http://www.Phidgets.com/docs/Language_-_LabVIEW#Quick_Downloads

  http://www.mccdaq.com/DAQ-software/Universal-Library-Extensions-LV.aspx

  Hi cgarlow,

  Have you tried to use the "flower?" entry on writing to measurement file Express VI?  This entry to specify when LabVIEW writes data to a file of measures.

• DAS 4020/12 trigger

  Hello world

  I am currently working on labview, programming acquisition card "DAS 4020/12 release. It is an acquisition card 4 channels + 1 trigger

  All good onely my trigger books who want absolutle trig on the chanel n ° 0. (so I 3aquisition chanel + 1acquistion & trigger instead of 4 acquisition + 1trgger)

  To prgram, I use labview + universal library...

  I thank you for any help that you could give me

  Awawa

  You have posted to the wrong Board. This forum is for an add-on for Excel called measure. I suggest that post you to the Office of LabVIEW.

  You can also attach some code you've already written with a little more explanation of the exact nature of your problem.

• is it possible to increase the content of a digital picture by a constant.

  Hello

  I use the universal library to read a voltage from a data acquisition device, and it seems that the playback feature is put in a 1 d table then in a chart.

  I need to get this tension and multiply by a number and couldn't just as it is in table format.

  How would I be able to multiply the contents of the table by a constant digital?

  Thank you

  When you try to multiply the value that you must take the value of the waveform, as shown below or by reading the value itself you could choose 1 double d instead of waveform.

  

  

  Good luck

• 1208fs for labview 10 usb connection problems

  Hello
  I'm relatively new to Labview and just improved labview 10. I used 6.1 before and had no problems using my mcc Board of 1208fs USB to run experiences before. I tried to connect even to labview 10 on my new computer, and the only thing that will connect to the instacal is. Ive plugged throu instacal, but is not visible in the list of I/O that selects the channel to use. Any help would be appreciated.

  Thank you!
  Andrew

  By the way, my os is windows xp

  Andrew,

  MCC daq devices have a different set of drivers for LabVIEW 8.2.1 LV versions and newer.  See http://www.mccdaq.com/daq-software/universal-library-extensions-lv.aspx this is ULx.

  I have one of the devices USB-1208 and discovered very recently this issue when I wanted to use it in a LV 8.5 application I wrote.  The new driver is actually nicer and DAQmx drivers a little resembles the way you use them.  While the former pilots of the Universal Library for older versions of LabVIEW looked like using traditional DAQ hardware drivers of OR.

• Meilhaus 3106 MAX/DAQ Assistant questions

  Hello

  While I'm sure that you all have grown tired of my usual throat-clearing, I'm a relatively inexperienced developer, so apologies in advance if this question is incomplete or missing otherwise.

  I recently got a Meilhaus electronic RedLab 3106 DAQ.  Box manual is at: http://www.meilhaus.org/downloadserver/redlab/manual/RedLab%203106_en.pdf

  Attempt to use this device after completing installation 'Quick Start', I discovered that the data acquisition was not read by MAX (v5.0). In addition, by attempting to use the DAQ Assistant, in LabVIEW 2011 for this box DAQ (which I did successfully on this machine with a DAQ USB of NOR-6008), I discovered that the device is not listed with the text "no taken physical channel supported" that appears when the registration of the channel would be generally.

  Normally, I try just a reinstall of the drivers/software 3106 package, but the strange thing is that Windows (XP - SP3) gives me the bubble 'New hardware found' when the USB fuelling the DAQ cable is connected to the computer. In addition, the acquisition of data can be read by a program that came with the acquisition of data called "InstaCal", including an order to make the power led on flashing box. Finally, a universal library, which also comes with the DAQ hardware has itself installed successfully in LabVIEW under "User Libraries". Given this feature, I am convinced that it is simply not possible to use the DAQ Assistant in LabVIEW for this particular data acquisition or that there is something in LabVIEW/MAX in need of fixing.

  Someone knows a problem similar to this with the 3rd party hardware (ideally, Meilhaus) and software of NOR? If so, how do fix you it?

  Kind regards

  MG Wilkinson

  Material acquisition of third-party data is not supposed to be detected by MAX or used with the DAQ Assistant. Thus, simply use the functions you provided.

• Is DAQ Measurement Computing USB - 1608FS compatible with labview?

  I have DAQ USB-1608FS from Measurement Computing company, and I was trying to see if it is possible to use

  This data acquisition with labview 2012. I tried to download the drivers from their company http://www.mccdaq.com/usb-data-acquisition/USB-1608FS.aspx

  but when I tried to use labview in the DAQmx the DAQ tool is not detect it by LabView. So, if anybody out there knows if this data acquisition

  really can work with labview, please let me know.

  Their driver seems to be ULx http://www.mccdaq.com/daq-software/universal-library-extensions-lv.aspx

  and he said that he supports LabVIEW 2012. I suppose you open a sample and the device does not appear? The device is displayed in the Windows Device Manager? It seems that this driver/device will work, there may be just a few questions it initialize properly on your machine (either with Windows or Measurement Computing software). You must be to open a debate on their forums or call their support help line.

  Good luck! Let us know some of the above and, of course, let us know if find you the solution.

  -gavin

• Aout.VI and several other standard sub VI

  I have a system powered by a data acquisition system and I'm missing the installation CD with several important Sub VI

  I searched NI.com nothing works, can someone point me to the following Sub standard VI?

  > Dcfgport.vi

  > Aout.vi

  > Ain.vi

  > Dbitout.vi

  I use LabView 8.6

  Now I'm back to work, I checked my installation of these files. They seem to all be together on my installation in the following path:

  C:\Program NIUninstaller Instruments\LabVIEW 8.5\menus\Universal Library\Das16.llb\

  For what it's worth, navigate through the palettes I get Dcgport.vi and Dbitout of 'user - acquisition of MCC - e/s digital libraries' palette

  Ian

• problem while conspiring waveform of the signal in real-time

  Dear Sir

  I use LabVIEW8.2 and USB1208FS for data acquisition. I have configured hardware with LabVIEW and data in real time using the Universal Library VI AInScBg.vi. When I draw my signal on the waveform (amplitude vs. frequency) then on axis x frequency ranges from 0 ~ 0.49 hz. I have change the sampling rate of 1000 Hz to 4000 Hz, but on the x-axis without frequency change occurs and it is set at 0.49 hz. Can you please guide me how can I get the frequency of my own interest on the x-axis.

  I enclose you daughter of LabVIEW for reference.

  Kind regards

  Muhammad Irfan

  Student

  UTP Malaysia

  0060149087570

  Simply change the text label of the x-axis of frequency does not automatically the correct calculation. You do not pass in the sample information in the service spectrum, so you get no frequency information. You can see the strain on the entry point. The function expects a data type of waveform as input. Without it, the dt will default to 1. Then, use the function create a waveform and add information from dt to it as well as your table of Y.

• UL for Labview 7.1

  I am using the PCI-DIO48H card order something through LAB View 7.1. I have installed all C.D. have been asked during the installetion. Now for the acquisition of data I need the Universal Library (UL) for labview 7.1. Can any a quide me please, where can I get this library for?

  Thank you very much

  Downloads of software computer measurement of Web site.

  http://www.mccdaq.com/software.aspx.

• How can I purchase with card PCI-DAS6025 data

  I use my DEAR Council of Measurement Computing PCI - DAS6025 for the acquisition of data in LabWindows 5.0. How can I perform data acquistion? I set up this Panel using "InstaCall' EMANATING Measurement Computing. Whenever I use ' EasyI / o ' or 'Data Acquisition' library provided by LabWindows, I still get the same error as "device is not National Instruments.

  Thank you

  Ramirez

  You cannot use data from National Instruments API (OR-DAQmx and NOR-DAQ) acquisition. You will need to install the Universal Library of computer measurement software and use that API instead.

  Universal Library software is distributed on the CD that came with the card, or you can download it from website Measurement Computing www.mccdaq.com.

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off