UNIx connector server start/stop procedure

Similar Questions

• Start/stop the server Oracle On Demand

  Hello
  
  I installed Oracle 9i R2 on my laptop (WinXP SP3) for certain events. When the project is completed, I want to keep the Oracle server on the laptop but disable to reduce consumption of resources. When I need Oracle server, I will start/stop it on request.
  
  Is it possible to do that, if yes, can you please tell me the procedure to do?
  
  Thank you very much in advance.

  Like Yingkuan said, changing (at least) the database services and the listener to the manual (instead of the default automatic value).

  Then create a small batch with the Net Start command to start these services. (and another to stop).

  net start "OracleOraDb11g_home1TNSListener".
  net start "OracleServiceORCL".

  net stop "OracleServiceORCL".
  net stop "OracleOraDb11g_home1TNSListener".

  (the name of your database can be more ORCL)

  Then, you can double-click to start and stop Oracle as often as you want.

• VMware vCenter Server service stops or restarts at the start of data collection

  VMware vCenter Server service stops or restarts at the start of data collection

  I am using vCenter Server 5.0

  Whenever I have begin to collect data, vcenter service stops or restarts, if I stop data collection and to disable the agent, vcenter service again and works well.

  Please any help!

  Thanks in advance

  It is a known issue, relating to the collection of historical data being enabled (nonzero) in the properties of the VMWare Agent on the Agent status screen.

  Change to 0 to disable/re-enable the agent and it should fix the problem.

  Please open a ticket of level 1 with telephone support if you need more help.

• procedure to start/stop DG

  Hi friends,

  without worrying switch / switch between primary and physical database, we need to stop/restart DG set. what procedure with the start/stop oracle 11g dataguard sequence action are expected to be implemented?

  SQLplus is ok for above operation? power primary DB initially?

  Thank you

  newdba

  Hello again;

  You can just stop primary and should resume without problem. However, I have to POSTPONE, then power off and then turn ON.

  ALTER system set log_archive_dest_state_2 = reporter;

  ALTER system set log_archive_dest_state_2 = ENABLE;

  The day before will just sit and wait for the next sequence, if you do it this way.

  Best regards

  mseberg

• Start/stop Weblogic administration server

  Hello
  
  I installed Forms 11g in my Pc at home, so it is possible to Start/Stop Weblogic Admin Server and the window which appears, not free to ask me on the user name and password?
  I mean like a bat (script) file, enter the user name and password in a text file
  
  
  If so, also the same in WLS_FORMS?
  
  Thank you.

  Hello Apollo,

  Yes it is possible, just do this:

  Create a file named boot.properties in the DOMAIN_HOME\servers\server_name\security folder

  inside the file, add:

  username = user
  password = VOTRE_MOT_DE_PASSE

  the next time you adminServer or weblogic managed server will encrypt this file, and ask not of user and password :)

  Concerning
  Carlos

• CF8 dev edition - how to start / stop the server?

  Mac osx - CF8 dev edition - how to start / stop the server?
  
  I would turn off auto CF8 start at startup and I can manually start and stop the server...
  
  Q: How do I configure this?

  > Now, I'm also interested to extinguish CF8.01 "auto start on startup.
  > (currently set to that now)
  >
  > Q: How can I turn off that autostart?
  >
  > Hi folks - I'm always interested in the CF on MAC OS x 10.5 server configuration to
  > * NOT * Auto Start - how can I turn off that autostart?

  I googled "cf8 osx doesn't autostart" and turned to the top this:
  http://www.Feed-Squirrel.com/index.cfm?evt=viewItem&ID=96307

  Who is? That's all a little Greek to me because I have not used a
  Mac for...

  Crikey...

  TWENTY YEARS.

  --
  Adam
  (suddenly feel old enough)

• 11 GR 2 Grid Infrastructure manual start/stop in clustered environment

  Hello

  I have installation 11 GR 2 grid in both a stand-alone environment and a cluster environment and I am looking at some differences regarding post-market manually in these two environments

  In the stand-alone environment, manually stop really just composed of-

  ASM - stop I would use generally "srvctl stop asm ' to do

  Stopping HAS (Oracle Restart) - using "crsctl stop at".

  Would be just the reverse of these

  However things in the clustered environment seem to be a whole different kettle of fish!

  First of all I appreciate this start manual switch of ASM and Cluster resource (in stand-alone environments and Clustered) is not really essential for the operation on the day the day (it's really for food issues) and a server startup or stop will do the necessary start / stop services - so somehow this manual process is a bit contrived for the race on the day the day

  Q1. Given that there are so many different levels of process / demons for the clustered environment - is there still a viable manual start for 11 GR 2 GI procedure in a clustered environment?

  Any help in identifying the manual order to start / stop would be appreciated?

  Thank you

  Jim

  Hello

  You can stop/start the cluster and all resources with "crsctl stop/start crs. There is no need to manually stop the asm, it will be managed by clusterware, as well as the dbs, auditors, etc.

  You can use "crsctl stat res t ' for an overview of the resources managed by the crs.

  "crsctl stat res ora.your_dbname.db Pei" gives you detailed information about the resource, including the start and stop option. Regularly, this should be the immediate mode for the dbs, if you're fine with this mode of closure you can simply use crsctl stop crs to stop everything on a single node.

  Concerning

  Thomas

• Message "Microsoft (C) Register Server has stopped working and was closed" appears

  When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed".

  Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit: .

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Bluetooth Stack COM Server has stopped working

  When you start Windows Vista Home Premium, I get an error message saying "Bluetooth Stack COM Server has stopped working"

  I also received a message BTTray saying "ERROR: unable to start Bluetooth stack service".

  How can this problem be solved?

  Thank you for your efforts in answering this question.

  Hello

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click the item
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vostro 200 Mini Tower trying to start, stops, then resumes

  Vostro 200 Mini Tower trying to start, stops, then repeats until you press the power button to interrupt the cycle.

  The power button is orange and fixed

  The blue disk activity light

  MOBO is lit

  All the fans (CPU, GPU, PSU, case) work

  Removed and reinstalled video card

  Deleted and reinstalled memory modules

  Power connectors to reinstalled MOBO

  Battery replaced CMOS

  All connectors are firmly connected, and yet there seems to be no power to the screen or keyboard.

  I disconnected the power, drained residual power and reconnected the power.  The cycle continues.

  I would appreciate any other suggestions on what I can try (as - why the screen and keyboard are not powered by the computer).

  Thank you.

  RJ318

  The power supply could be good, it is best to test with a unit of work "known."

  My thoughts are, interestingly, spend the money on a 9 +-system years?

  But you can buy a motherboard Dell refurbished/used OEM for $24.99 + S & H from here:

  https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS

  Note: Unfortunately, while you can make an informed diagnosis, sometimes computer troubleshooting, is diagnosis by substitution.

  Bev.

• Connection reset error for UNIX connector

  Hello

  While trying to perform research for unix connector, I get the error in the log below.

  
  

  java.net.SocketException: connection reset

  
  For this error in the oracle documentation, it says to resolve this problem, verify that you set the UseSSL parameter value in the target system and the connector server COMPUTER resources to yes and true, respectively.

  
  

  But we do not have a server connector and in the COMPUTING resource for target system, there is no UseSSL parameter?

  
  

  Please suggest
  

  
  

  [2015-08 - 03T 11: 21:23.349 - 07:00] [oimext_server1] [WARNING] [] [oracle.iam.scheduler.vo] [tid: OIMQuartzScheduler_Worker-4] [username: oiminternal] [ecid: 77744a889dde03de:-6b95b905:14ee65bb481: - 8000-0000000000000003, 1:30684] [APP: IOM #11.1.2.0.0] IAM-1020021 cannot perform the work: UNIX user group search Recon xxxxxx with history Job Id: 132260 []

  org.identityconnectors.framework.common.exceptions.ConnectorException: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset

  at org.identityconnectors.framework.common.exceptions.ConnectorException.wrap(ConnectorException.java:101)

  to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:340)

  at org.identityconnectors.common.security.GuardedString.access(GuardedString.java:105)

  at org.identityconnectors.genericunix.GenericUnixConnection.createSSHConnection(GenericUnixConnection.java:328)

  at org.identityconnectors.genericunix.GenericUnixConnection.connectResource(GenericUnixConnection.java:87)

  to org.identityconnectors.genericunix.GenericUnixConnection. < init > (GenericUnixConnection.java:74)

  at org.identityconnectors.genericunix.GenericUnixConnector.getConnection(GenericUnixConnector.java:138)

  at org.identityconnectors.genericunix.GenericUnixConnector.checkAlive(GenericUnixConnector.java:118)

  to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:105)

  to org.identityconnectors.framework.impl.api.local.ConnectorPoolManager$ ConnectorPoolHandler.testObject (ConnectorPoolManager.java:74)

  at org.identityconnectors.framework.impl.api.local.ObjectPool.borrowObject(ObjectPool.java:229)

  at org.identityconnectors.framework.impl.api.local.operations.ConnectorAPIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:83)

  to com.sun.proxy. $Proxy506.search (unknown Source)

  at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.identityconnectors.framework.impl.api.local.operations.ThreadClassLoaderManagerProxy.invoke(ThreadClassLoaderManagerProxy.java:107)

  to com.sun.proxy. $Proxy506.search (unknown Source)

  at sun.reflect.GeneratedMethodAccessor3690.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to org.identityconnectors.framework.impl.api.BufferedResultsProxy$ BufferedResultsHandler.run (BufferedResultsProxy.java:162)

  Caused by: com.jcraft.jsch.JSchException: Session.connect: java.net.SocketException: connection reset

  at com.jcraft.jsch.Session.connect(Session.java:525)

  at com.jcraft.jsch.Session.connect(Session.java:161)

  to org.identityconnectors.genericunix.GenericUnixConnection$ 3.access(GenericUnixConnection.java:336)

  ... more than 20

  Thank you

  My guess is EXIT 328 do not get a response from the server because of permissions or cannot perform the work - check your permissions for remote access and file access system--cannot be a code to deliver all this.

  .createSSHConnection(GenericUnixConnection.java:328)

  Exit 328

• OBIEE Linux Start &amp; Stop Script - OEL6

  Hello

  I try to use the next time you start & stop the Script in 6 OEL. It does not work. What changes do I work for 6 OEL.

  http://www.rittmanmead.com/2012/01/scripted-Obi-11g-Linux-startupshutdown/

  I have a DEV environment which is OEL 5. It works very well there. All entries are appreciated.

  Thank you

  Vincent

  (a) use http://ritt.md/init.d instead - this post you cite is now outdated (I'll update to reflect this). This post here shows how to set up a server OL6.

  (b) ' it doesn't' do not help us to solve any problems you have. Error message, steps to reproduce etc.  How to ask Questions the Smart way

• Automatic start/stop for guest settings keep reproduce every time I access the properties

  Greetings,

  I have a single ESXi host 5.5 with a single Win 2012 std server prompt.   I have a second guest, but is not in production. Several months ago I "thought" I activated the auto start and stop for this particular customer.  Due to problems of food in the building today, I had the opportunity to stop the comments and the turning off of the host completely.   After the reboot of the host, my guest, never started (automatically). I connected to the host via vsphere client and started manually.  No problems.

  I decided to check the settings of automatic start/stop and it is set to manual.  So, either I never actually put it on automatic (and I just have problems of memory in my head (not unusual for me)) or I put it really, and something happened where he became disabled or brought back to the default value.

  That said, I went to properties of start-up automatic and as mentioned above, found it turned off, I was able to allow him, but when he returned to the screen (after clicking OK), it displays TWO of each of my virtual machines in the Autorun screen.  I went back to see if I could change/delete/remove the extras (I've found a way to do it), and when I came back out of the screen there are THREE virtual computers listed in the pane. See attachment.  Anyone know what is happening here and how can I remedy the situation?

  Am I just being a fool and lack of obvious?

  Thank you.

  P....

  

  Exit the VSphere client and restart it solved the problem.  I presume a video type of bug, or maybe a bug with my version of the client.

• Start &amp; stop an instance RAC

  Hello

  I just created a 2 node 11 GR 2 database RAC, traditionally from databases not CARS I would just use sqlplus to start / stop the instance

  Q1. What is the recommended way to start / stop an instance in a RAC environment? Do you use a cluster to do command, or is sqlplus is acceptable?

  Q2. If you use sqlplus and more to stop an instance on a node, I presume that the cluster services is NOT as a failure and so don't try to restart the instance?

  Q3. similiarly what is the best way to start / stop a listener on a particular node?

  any help appreciated

  Jim

  Hello Jim,

  Q1. What is the problem with the status not reflected in the output of clusterware resource? Is it to do with the ability of Services to acknowledge a failure and restart the CLuster service?

  Response: The resource database is not parsed by SIR and if the database suddenly stops then none will try to restart the same.

  Q2. Regarding the automatic closing of a database in a CCR environment (as opposed to the manual method which I asked on-) if I simply turn off the cluster nodes of my will which in turn stops the Instances and close the database RAC itself (when the last Instance is closed)?

  For even if I turn on my knots, the first node start cluster, its instance and open the database?

  Answer: well, if you turn off your server then of course the database and stop anything else running on the server. When the server is under tension and if crs autostart is enabled then the clusterware stack will come with the server

  Q3. What is the difference between a Service and a resource of the cluster? Are the database, earphone etc services or resources? I'm just trying to understand why SVRCTL is used to manipulate the database and listener and not say CRSCTL?

  Answer: You can configure a service which is part of tree resources of database and the resource database is a parent for the same thing. Services are used to connect to the database. Database, (if added) services, asm, listener, scan etc are all the resources of the clusterware, which are monitored by the clusterware.

  You can refer to the Oracle documentation, which will give you more insight on these details

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16794/TOC.htm

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/TOC.htm

  Kind regards

  Vautrin - Oracle

• How to set up the database restarts automatically when the server starts?

  Hello
  
  What is involved if I configure Oracle database starts automatically when the server is started/restarted?
  
  I guess that change the following entry in/etc/oratab
  

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:N

  TO

  DEVDB:/u01/app/oracle/product/10.2.0/db_1:Y

  is not sufficient - there is more than that. But what is it?
  
  We can also configure the listener to automatically re / start?
  
  I guess that everything what is the solution, it will also apply to Oracle 11 GR 2 databases/ASM - right?
  
  The platform is Redhat Linux 64 bit (version 4.7 & v5.9).
  
  Thanks in advance!
  
  Best regards

  Hello

  Below is one example of autostart services database and the listener.

  1 > make/etc/oratab file entry Y as:
  ORCL:/U01/app/Oracle/product/10.2.0/Db_1:Y

  2 > create a file called "/ etc/rc.d/init.d/oracle" as root, containing the following.
  --------------------------------------
  #! / bin/sh
  # chkconfig: 345 99 10
  Description #: Oracle automatic start-stop script.
  #
  # Define ORA_HOME as equivalent to the $ORACLE_HOME
  # from which you want to run dbstart and dbshut;
  #
  # Define ORA_OWNER to the userid of the owner of the
  # Oracle in ORA_HOME server.

  ORA_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  ORA_OWNER = oracle

  If [! f $ORA_HOME/bin/dbstart]
  then
  echo "Oracle startup: cannot start.
  output
  FI

  case '$1' in
  'Start')
  # Run Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c "start ORA_HOME/bin/lsnrctl $".
  known - $ORA_OWNER - c $ORA_HOME/bin/dbstart
  ;;
  'stop')
  # Stop the Oracle databases:
  # The following command assumes that the oracle connection
  # will not prompt the user for all values
  known - $ORA_OWNER - c $ORA_HOME/bin/dbshut
  known - $ORA_OWNER - c "ORA_HOME/bin/lsnrctl stop $.
  ;;
  ESAC
  -------------------------------------------------

  3 > use the chmod command to set privileges to 755.
  chmod 755 /etc/rc.d/init.d/oracle

  4 > associate the appropriate oracle service run levels and set it to auto-start by using the following command.
  chkconfig--level 345 oracle on

  Note:-back, I've done this for a long time... Please check the dbstart use pfile or spfile to start the database instance.
  Thank you