procedure to start/stop DG
Hi friends,
without worrying switch / switch between primary and physical database, we need to stop/restart DG set. what procedure with the start/stop oracle 11g dataguard sequence action are expected to be implemented?
SQLplus is ok for above operation? power primary DB initially?
Thank you
newdba
Hello again;
You can just stop primary and should resume without problem. However, I have to POSTPONE, then power off and then turn ON.
ALTER system set log_archive_dest_state_2 = reporter;
ALTER system set log_archive_dest_state_2 = ENABLE;
The day before will just sit and wait for the next sequence, if you do it this way.
Best regards
mseberg
Tags: Database
Similar Questions
-
11 GR 2 Grid Infrastructure manual start/stop in clustered environment
Hello
I have installation 11 GR 2 grid in both a stand-alone environment and a cluster environment and I am looking at some differences regarding post-market manually in these two environments
In the stand-alone environment, manually stop really just composed of-
ASM - stop I would use generally "srvctl stop asm ' to do
Stopping HAS (Oracle Restart) - using "crsctl stop at".
Would be just the reverse of these
However things in the clustered environment seem to be a whole different kettle of fish!
First of all I appreciate this start manual switch of ASM and Cluster resource (in stand-alone environments and Clustered) is not really essential for the operation on the day the day (it's really for food issues) and a server startup or stop will do the necessary start / stop services - so somehow this manual process is a bit contrived for the race on the day the day
Q1. Given that there are so many different levels of process / demons for the clustered environment - is there still a viable manual start for 11 GR 2 GI procedure in a clustered environment?
Any help in identifying the manual order to start / stop would be appreciated?
Thank you
Jim
Hello
You can stop/start the cluster and all resources with "crsctl stop/start crs. There is no need to manually stop the asm, it will be managed by clusterware, as well as the dbs, auditors, etc.
You can use "crsctl stat res t ' for an overview of the resources managed by the crs.
"crsctl stat res ora.your_dbname.db Pei" gives you detailed information about the resource, including the start and stop option. Regularly, this should be the immediate mode for the dbs, if you're fine with this mode of closure you can simply use crsctl stop crs to stop everything on a single node.
Concerning
Thomas
-
Start/stop the server Oracle On Demand
Hello
I installed Oracle 9i R2 on my laptop (WinXP SP3) for certain events. When the project is completed, I want to keep the Oracle server on the laptop but disable to reduce consumption of resources. When I need Oracle server, I will start/stop it on request.
Is it possible to do that, if yes, can you please tell me the procedure to do?
Thank you very much in advance.Like Yingkuan said, changing (at least) the database services and the listener to the manual (instead of the default automatic value).
Then create a small batch with the Net Start command to start these services. (and another to stop).
net start "OracleOraDb11g_home1TNSListener".
net start "OracleServiceORCL".net stop "OracleServiceORCL".
net stop "OracleOraDb11g_home1TNSListener".(the name of your database can be more ORCL)
Then, you can double-click to start and stop Oracle as often as you want.
-
Remote Start / Stop function
I was wondering if Peter has any information about a remote starter / stop feature.
How can I connect start function of my C-motion or Preston the camera remotely? I don't see any other than the 'Remote' normal connection points, but this only works with the RM-B150/170 - so don't not compatiable with LCS.
I guess it's also possible that the stop and remote start could be addressed through the wi - fi connectivity when activated.
-
Start, stop, step chart generator
I would like to get into the start, stop and frequency step to build a table that will contain the value of to feed to a sweep generator.
I have something that works, except for one thing; the timeout value. I can't get this thing to stop on the stop frequency value. The step value seems to affect it too much. So could someone take a look at my vi and help me with this? In addition, the code seems a bit complex for what might seem like a simple thing to do.
Anyway, here's a slightly simpler implementation of your code. As you can see, you the codes was much more complicated than necessary!
Below is the implementation of the model of ramp (recommended). Both give the same result for entries healthy of mind.
I would certainly use the ramp model, because it has the better error handling (for example if the delta is zero or maximum is + Inf, etc.).
You can view the code to learn something.
You will need to pay attention to possible accumulations of bit errors, especially with fractional steps that cannot be fully represented in binary (e.g. 0.1)
-
Order of generation of the signal with the command START/STOP (State Machine approach)
Hello
I met the problem with the realization of control (START/STOP) signal generation using state machine.
There are 4 States in the computer status (see 4 screenshots below).
The problem is when I click the button START, only a short series of generated pulses.
What is the staff of task_in/task_out issue, which is not properly managed?
Thanks in advance
Pavel.
Oh... you have defined with the mechanical switch action up to published... Right click and go to mechanical Action > latch when released. Do the same for your Start button.
You took a second to read down hold value, because your writing acquisition takes on this subject for a long time, apparently.
The stop button the Application, I did switch when set to released. It is set to the switch so that it can be used as a local variable in the Acquisition State stop as Idle.
-
I had the C6180 Photosmart wireless connected to a Mac OS X 10.5.6 laptop Macbook Intel and IBM PC XP SP 2 for more than 2 years. I did have major problems with the printer.
Recently, I have known a couple of electric in my house. Since then the printer has turned off randomly once or twice. Today the printer began to turn off/on/off/on/turned off/turned on etc.
It lights up and shows the HP logo and process bar animation for one minute, followed by the message: "abnormal termination. To avoid damage on the button to turn off the printer. Do not use a wall or the band switch to close. Press OK. Then he stops and leaves upward.
I tried to enter batch Mfg mode by organizing the * and # keys. It flashes "Mfg commands - enter special Key Combo" for the second of two, then stops and makes a loop on/stop/start/stop again and again.
I have disconnected all data cables, installs the printer in another room, closes the wifi on both computers and connected directly to the wall on a different circuit to eliminate problems of low power as the culprit. I swapped the power cable between the wall and the block of the AC adapter with the same exact type of cord of another piece of equipment with the same results.
I wonder if it is a symptom of a surfboard logic damaged in the printer, or a problem with the AC adapter?
If it is the logic board, does pay to get it fixed? An equivalent printer for Mac would cost about $200. Not to mention that I came just to have stored on cartridges.
What is a likely indication of a problem of brick AC adapter? If so, should I spring for a replacement block AC adapter for $30?
I was not able to find this question in a post on the forum and I was wondering if it's 'Au revoir' to the C6180?
Thank you for your contribution to this number
Try this:
1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.
2 unplug the power cord also from the wall...
3. wait for two minutes.
4 reconnect the power cord to a wall outlet first.
5. hold the pound (#) and six 6 buttons.
6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.
7. turn on the printer if it goes out...
Let me know the results.
-
I have a little problem. I've just been programming in labview for 2 weeks.
I'm trying to figure out how to use my channel of analog input on the USB-6009 case for start/stop (reference trigger and start) presented to the second analog input channel samples.
I need the first analog input string to operate continuously and control sampling on the second. When the second channel will start sampling program brings a new graph each time and saves it (I have all this that figure out).
How can I configure the trigger so the lance program presented in for the second channel when the 1 channel reached above 2V (e.g.) and stop when it falls below 2V.
I use a pressure force sensor on the first channel that gives me straight (up to) 5 V when it is pressed and nothing when it is not...
Thank you.
Grand... Thanks for the information!
But can't I then make a 1 channel instead and wait until that meat of the max element value?
-
XP Internet vidio run start stop smoothly the Rafale in short reading.
Vidio XP Internet do not work correctly when you click on vidio execution pauses and starts, stops and starts its really slow?
Looks like it is buffering. Either wait a few minutes until you press play, download the video to your hard drive and then watch, make sure you go to your internet connection at full capacity, so try to use maybe a wired network instead of wireless, I sometimes look less people will use internet or upgrade to a better download speed of your internet provider.
-
Windows XP lost Standby Option of start / stop
original title: gardeningwithgusto
I tried to make my fujitzu computer run faster and update some files. Subsequently start/stop, the option ensures the menu drop-down disappeared. All that remained was logout, restart and stop.
Thank youHello
I suggest you follow the troubleshooting steps form the article and check if it helps.
Standby missing from the shut down Windows dialog box
-
Why - Windows live mail and Windows live album veiwer keep start/stop?
Please can someone help.
Why Windows live mail and Windows live album viewer repeatedly keep start/stop?
I am running windows vista Home premium computer laptop, and it's so boring.
Concerning
Silverfox161
Hello
See the link and check if it helps:Windows Live Photo Gallery crashes or won't startIf you're still having problems with Windows Live Mail and Photo Gallery, I suggest you to send your query in the links given to improve assistance.
http://windowslivehelp.com/product.aspx?ProductID=15
http://windowslivehelp.com/product.aspx?ProductID=20 -
Vostro 200 Mini Tower trying to start, stops, then resumes
Vostro 200 Mini Tower trying to start, stops, then repeats until you press the power button to interrupt the cycle.
The power button is orange and fixed
The blue disk activity light
MOBO is lit
All the fans (CPU, GPU, PSU, case) work
Removed and reinstalled video card
Deleted and reinstalled memory modules
Power connectors to reinstalled MOBO
Battery replaced CMOS
All connectors are firmly connected, and yet there seems to be no power to the screen or keyboard.
I disconnected the power, drained residual power and reconnected the power. The cycle continues.
I would appreciate any other suggestions on what I can try (as - why the screen and keyboard are not powered by the computer).
Thank you.
RJ318
The power supply could be good, it is best to test with a unit of work "known."
My thoughts are, interestingly, spend the money on a 9 +-system years?
But you can buy a motherboard Dell refurbished/used OEM for $24.99 + S & H from here:
https://www.Amazon.com/Dell-motherboard-Inspiron-systems-compatible/DP/B003CO0WQS
Note: Unfortunately, while you can make an informed diagnosis, sometimes computer troubleshooting, is diagnosis by substitution.
Bev.
-
start / stop NFC programmatically
I am able to start / stop Bluetooth of cascades
Is there a way to start and stop the NFC by programming?
It has enabled for a business application in the perimeter of work where the NFC should automatically /disabled.
THX
Rodger,
Thanks again. It works well - even in the scope of work
Integrate this way:
At STARTUP after UI is created from a QTimer delayed in QML, I call checkNfcState:
void ApplicationUI::checkNfcState() { mPpsObject = new bb::PpsObject("/pps/services/unifiedradiomgr/status?wait,delta", this); bool res = connect(mPpsObject, SIGNAL(readyRead()), this, SLOT(onPpsReadyRead())); Q_ASSERT(res); Q_UNUSED(res); if (!mPpsObject->open(bb::PpsOpenMode::Subscribe)) { qWarning() << "E K K E Could not connect to Radio object: " << mPpsObject->errorString(); } }
and here's the SLOT:
void ApplicationUI::onPpsReadyRead() { bool readOk; QByteArray data = mPpsObject->read(&readOk); if (!readOk) { qDebug() << "N F C !readOk"; return; } bool decodeOk; const QVariantMap map = bb::PpsObject::decode(data, &decodeOk); if (!decodeOk) { qDebug() << "N F C !decodeOk"; return; } const QVariantMap ppsFile = map["@status"].toMap(); if (ppsFile.isEmpty()) { qDebug() << "N F C !ppsFile.isEmpty"; return; } QString state; state = "nfc"; if (ppsFile.contains(state)) { QString nfcValue = ppsFile[state].toMap()["state"].toString(); qDebug() << "N F C current STATE: " << nfcValue; if(nfcValue == "OFF") { emit nfcOff(); } disconnect(mPpsObject, SIGNAL(readyRead()), this, SLOT(onPpsReadyRead())); mPpsObject->deleteLater(); } return; }
As soon as I get a State NFC I disconnect subscription because there is already an NFC events bps events loop, where I'll be notified if NFC pass in review status:
void ApplicationUI::handleNfcEvent(bps_event_t *event) { uint16_t code = bps_event_get_code(event); nfc_event_t *nfcEvent; nfc_target_t* target = NULL; nfc_result_t rc; uchar_t id[20]; size_t idLength = 0; switch (code) { case NFC_TAG_READWRITE_EVENT: .... break; case NFC_SNEP_CONNECTION_EVENT: { .... break; case NFC_NDEF_PUSH_SUCCEED_EVENT: { ... break; case NFC_NDEF_PUSH_FAILURE_MSG_OVER_SIZE_EVENT: { ... break; case NFC_NDEF_PUSH_FAILURE_REJECTED_EVENT: { ... break; case NFC_NDEF_PUSH_FAILURE_IO_ERROR_EVENT: { ... break; case NFC_ON_EVENT: ... break; case NFC_OFF_EVENT: ... emit nfcOff(); break; default: ... break; } // don't forget to delete the target if (target != NULL) { nfc_destroy_target(target); } }
It works fine now.
As yet I had no information if there is a way to start the NFC programmatically open settings NFC detection NFC OFF if:
void ApplicationUI::nfcSystemSettings() { InvokeRequest cardRequest; cardRequest.setUri("settings://nfc"); cardRequest.setMimeType("settings/view"); cardRequest.setAction("bb.action.OPEN"); cardRequest.setTarget("sys.settings.card"); mInvokeManager->invoke(cardRequest); }
-
OBIEE Linux Start &; Stop Script - OEL6
Hello
I try to use the next time you start & stop the Script in 6 OEL. It does not work. What changes do I work for 6 OEL.
http://www.rittmanmead.com/2012/01/scripted-Obi-11g-Linux-startupshutdown/
I have a DEV environment which is OEL 5. It works very well there. All entries are appreciated.
Thank you
Vincent
(a) use http://ritt.md/init.d instead - this post you cite is now outdated (I'll update to reflect this). This post here shows how to set up a server OL6.
(b) ' it doesn't' do not help us to solve any problems you have. Error message, steps to reproduce etc. How to ask Questions the Smart way
-
VMs of automatic start/stop on power loss
Hello! I know that this has been covered at the front (and I read these threads/documents/etc), but I still have questions. Forgive my ignorance!
So far I have activated it so:
But virtual machines under 'Autostart' is still not auto-start. I then found that HA can be a factor (if it is enabled, you can not auto-start/stop VMs). However, it is currently in a State of N/A:
Each VM has this same State N/A as well (and VM Tools are installed on each of them, if it matters). I have not any clusters or whatever it be listed under the House, so I can't understand where really disable HA:
Looks like you run ESXi 5.0 Update 1, and only in this version there was a bug that made the autostart VM does not...
Upgrade to a later patch the 5.0 (or better to 6.0?) level to solve the problem.
More info is here: vSphere Hypervisor Auto Start Bug fixed - VMware vSphere Blog - Articles from VMware
Maybe you are looking for
-
And please get this done by reference... Google org. delete messy, juvenile content Please see the rules and lines guidelines .
-
I was told that my IP address is "at risk".
In 2015, I sucked into the "scam of safari browser' and thought I was talking with"Apple Support"who told me to contact ' Marchand: Computer Fix, INC. in any case, I let them "fix" my problem, paid them, called them back after I discovered the proble
-
Z6100 42 '': Z6100 windows 10 pilot?
Does anyone know what is the strategy of maintaining HPs driver? He was never a 8.2 driver windows update, I got it after about two days, but now that I've upgraded to windows 10 work, I would like to know if it will release an update of the driver
-
HP G61 - 110SA Notebook PC: Bluetooth disappeared
Hello & help! Re: HP G61-110SA laptop PC I just bought a wireless headphones (Philips headset stereo Bluetooth SHB4000) but I am unable to get them to connect to my laptop (they connect fine on my phone if this isn't a problem with the headphones). I
-
I have a (relatively recent) connected to a PC and a Mac Wireless Officejet 7110. I cannot print envelopes #10 through Microsoft Word (or any other software) on each side. I have tried different brands of envelopes with different paper thicknesses. W