Unknown device on the Satellite A200-SAE6E after the installation of Win XP

Similar Questions

• Satellite A200-17: after XP installation DVD not recongnised

  Hello everyone

  I have vista just formatted and installed XP on my laptop A200-17.
  In Vista, I could read and write CDs DVD, but as I found it now I can't read or write any DVD in XP and can only play regular CDs.

  Can someone help me around?
  Thank you

  How do you say? I assume you mean this engraving function in Solution Explorer.
  You can also use an external application to burn like Nero or CDBurnerXP to burn your files on a medium such as DVD/CD.

  Usually it shouldn´t be that DVD´s couldn t be read, but I'm not sure. That you have installed all the drivers?

  Welcome them

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• There is a unknown device in the network map

  Then all of a sudden, when I open the network and sharing Center, there is an unknown device between my computer and my router. As I noticed this, I also noticed that when I tried to access the files or settings in the Control Panel, it might refuse me. For me to say the least! Any suggestions on what I should do?

  Hey, Jonesy, T.

  The steps of troubleshooting in this thread has worked for several user solve the problem with an unknown device on the network.

  Let us know if that helps.

• Question about the installation of Win XP on Satellite Pro P200

  Hello

  I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
  Last problem: vista give no right to copy my USB hd protable with xp files.

  Finally, I lost all hope and want to go back to xp.

  Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
  Are there concerns as none have some drivers, things that do not work or problems with sata hd.

  Thank you

  Luke

  Hello

  It's a difficult topic-> XP on Vista machines.

  First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

  Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

  If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

  Welcome them

• BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

  A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

  After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

  In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

  I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

  I tried to reinstall Win7 by removing the disc again, but I get the same results.

  What can I do?

  HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

  Thanks for your help.

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Satellite U500-115 - unknown devices after the Installation of Win XP

  Hello

  I just installed Windows XP on a Satellite U500 - 115 (PSU5EE) and cannot get rid of several unknown devices in Device Manager.

  Before to install the operating system, I changed settings AHCI in the BIOS to Compatibility-Mode (IDE), so I don't need to inject the SATA driver during installation.

  These are the unknown devices:

  ACPI\PNP0C32\1 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\2 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\3 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\4 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\TOS6205\2 & DABA3FF & 0 (location: System compatible ACPI Microsoft)

  Of course, I installed driver chipset and graphics driver from the toshiba download page, but the unknown devices are still there! Can you please tell me what kind of driver I need to install ACPI devices - and get rid of these unknown devices?

  Thanks in advance,
  Hans

  Hello

  In my opinion the unknown devices belongs to the SATA interface controller and these appear as unknown device because you have installed the XP compatible mode.

  Try to install the Intel Storage Manager driver.

  ACPI\TOS6205 device can be a Bluetooth device.
  You must install the battery Bluetooth to get rid of unknown device.

  welcome them

• Satellite A200-1AS - after you have reinstalled the blinking cursor

  Sorry for my English.

  Hello people
  I have a laptop Satellite A200 - 1AS PSAE0E - 025006GR,
  now, I wanted to format everything because I find very slow.

  Unfortunately I don't have the recovery cd not, and the 0 key does not work.
  Also new vista dvd buy code (recover partition not resolved vista partition) fine. But when you restart all black blink single slider.
  Downloaded drivers robson - unpacked 20070919162555.zip and during the next installation vista driver is loaded (which was eye appear as incompatible but no matter) Intel 82801 GR / GH SATA AHCI and still nothing...

  Could someone give me a tip?
  Thanks in advance

  The robson - 20070919162555.zip driver contains the SATA driver in the folder
  Robson Winall Driver package

  

  You will find the .ini, .dll files that must be added during the installation of Vista Setup.
  But first you must make sure that the HARD drive is recognized in the BIOS (first page)

• Satellite C70D-B-306 - 2 unknown devices in the list of devices

  Hello

  I have a PC laptop toshiba C70D-B-306 (psclee) and I reinstalled windows 8.1 since a DVD separate because I change the hard drive by default for a fast ssd drive.

  Everything works, but in my device manager, I have 2 unknown devices listed (with exclamation point), as far as I know I downloaded all the drivers available from the support Web site of toshiba for this laptop and install, but the 2 unknown devices will simply not disappear.

  Can someone tell me which driver I need exactly for these 2 devices?

  2 devices are:
  ACPI\ASD0001\2 & DABA3FF & 1
  and
  ACPI\SMB0001\4 & FE73487 & 0

  As mentioned, I already downloaded all the drivers for this laptop and install, windows is of course to date. Also, I let windows search for drivers on the Internet and on the disc, but no driver found where.

  Who can give me the Golden tip?

  There is a good method to find out what drivers are missing.
  First of all, you should check the DEV (device) and FRI (supplier) codes

  Here's a short instruction how to find this in detail:
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  Know the vendor and device ID, is not a big deal to get the correct drivers.

  However, you must also install additional software of Toshiba (Toshiba System Driver) out to win 8.1
  Please also note that there are two areas of pilot Win 8.1: 8.1 update Win and Win 8.1 32 bit / 64 bit categories
  Where you would find not all pilots within the Win 8.1 update also check categories of 32-bit / 64-bit Win 8.1.

• Two processors listed in device of my Satellite A200-1MD Manager

  Is of my Satellite A200-1MD, on the device, manager by clicking on the processors opens two processors (for my two processors).
  One is "Intel (R) Core (TM) 2 CPU T5300 @ 1.73 GHz
  the other is "Intel (R) Core (TM) 2 CPU T7200 @ 2.00 GHz

  IS IT NORMAL TO HAVE TWO PROCESSORS WITH DIFFERENT SPEEDS!

  Is there a problem with my driver software or what? Keeping in mind that when I click SYSTEM in Control Panel it shows me that the processor is T5300 1.73 GHz 1.73 GHz.

  I need to know if there is a problem with my laptop, because I think that she was not working fast enough.

  Yes, it seems this is a common problem of Vista.
  At first my laptop L30 CPU is recognized as two different processors with different speeds.
  You must remove the CPU of the Device Manager and have to restart the laptop.

  After reboot new and new CPU Device Manager installation displays the correct speed ;)

  Best regards and don t forget to assign ;) reward points

  Happy new year dude

• Satellite A200 freezess after 3-5 seconds

  I have a laptop Toshiba Satellite A200 and is not power on the right.
  The fan starts to turn, the power lite lights up blue constantly. Then after 3-5 sekonds the fan stops and then the power lite flashes: two times blue then red twice. And the freezzes of the laptop. Could flashing what it means.
  I think that this is a partnership for the problem. I already deleted the bios, it does not help.

  Removed the battery. Also removed from the bios battery.

  Can someone help me know what means the flashing?

  Hello!

  It is really strange and I've ever heard on an issue also, but in your case I would try to remove the CD/DVD drive and HARD drive and then try again.

  You have external devices connected to the laptop or the LAN cable, the mouse, the keyboard or something else? If so, delete all and try again.

  In the worst cases, you should contact an ASP and follow the link posted by Luke to find a.

  Good bye

• Need Driver WXP "SM BUS PCI Device" for my Satellite A200-170

  After downgrade to Windows XP, I have a problem with a Satellite A200 - 170 (PSAE6E) there is no XP-driver available that makes "pci device" work (on toshiba - or the site of intel).
  How can I get my Realtek - his return?

  Please help me!

  > there is no XP driver available, which makes the work of "pci device".
  The lack of "PCI device" could be everything! The Toshiba driver page provides all the important and necessary drivers for all the devices available on the Satellite A200-17O

  On the Toshiba page, you will find the driver installation instructions. Please follow these steps!
  In addition you must update Windows Xp to the last State before you continue installing the Toshiba XP drivers.
  At least make sure that Microsoft has been installed the KB835221 hotfix.

  _Do this: _
  1. download Microsoft's KB835221 hotfix
  2. Remove "Audio device on High Definition Audio Bus"
  3. install KB835221
  4. reboot the system
  5 XP automatically detects devices

  Best regards

• Some keys no longer work on Satellite A200-196 after Windows 7 update

  Hi all, I've just upgraded computer laptop of my partner (a Toshiba Satellite A200-196) to Windows 7 after you initially install Windows XP on it (it came with Vista).

  After the XP update, I noticed that some keys were not working. I don't remember the process that I used to solve the problem, but the difficulty that I did, and they were all soon works perfectly. So this is a software problem and not material. I think he might have something to do with the FN key - but I can't be sure.

  Now, I just upgraded the same machine and I have exactly the same problem. Keys that don't work are Backspace, O, P, F, H, K and L.

  Can anyone help please? I tried to reinstall Win7 and the problem is still there.

  Thank you very much

  Andy

  > The keys that don't work are Backspace, O, P, F, H, K and L.

  These keys have nothing to do with the missing software.
  Indeed, the function key (FN key) needs a Toshiba utility particular installation / software to make it work, but the keys Backspace, O, P, F, H, K and L are common keys on the keyboard that don t need no special software.

  That's why I think that the problem is hardware related: simple keyboard malfunction.
  I guess that all of these keys work correctly if you sign in and use the external USB keyboard.

• HP Pavilion p 15-132nd: unknown device of the HP wireless button driver

  Madam, Sir,

  After you perform a clean installation of Windows, I noticed an unknown device which I can't find drivers for.

  The device has the following hardware id: ACPI\VEN_HPQ & DEV_6001. And I suspect the Wiriless button or something similair.

  Could someone provide me a driver please?

  Best regards

  Jasper Drescher

  Hello:

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_124774_1 & swEnvOid = 4158