Unknown embedded in CS ICCBased ICCProfile

Similar Questions

• Satellite A100-237: unknown device after installing Vista

  Hi all

  Just installed vista on my A100-237... After doing the upgrade of the BIOS and the installation of the "unknown device" Value Pack, with the location "on system compatible ACPI Microsoft" appeared in my device manager, any ideas on how to address this issue?

  Thanks in advance!

  Hello

  Could you please check if you can see the 'Batteries' entry under ' computer in Device Manager?
  As far as I know that the entrance of batteries should have a "Microsoft SMART Battery" & "Microsoft SMART Battery subsystem.

  If there is an unknown device, this might have something to do with Microsoft ACPI Compliant Embedded Controller.
  In this case it seems that you need a driver for MS SMART SMART Battery & MS battery subsystem.

  pleasae also check this thread;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14575

• Device driver tiny unknown lenovo ThinkCentre M83 LEN4002

  I did a fresh install of Windows 7 on a Lenovo ThinkCentre M83 (tiny, small form factor) desktop computer and I have an unknown device, I couldn't find the drivers in Device Manager. It's ACPI\LEN4002. Googling reference views embedded ThinkPad monitor which doesn't seem to be the right thing here. I already installed the chipset driver, the Intel haswell/vga driver, AMT, MEI, the Application Interface of Lenovo (LBAI, ACPI\LEN4001) driver is not driver Intel WIDI. Even if it is listed in the matrix of driver for this model, the thinking says that it is not compatible with this system.

  Someone has an idea of what device it?

  Thank you!

  Found after downloading the pack from SCCM drivers for the model. LEN4002 is identified as the 'of Lenovo APS sensor application interface".

  Well, of course it is! :-)

• Unknown song

  I'm a mac user, and I recently bought a Sansa Fuze.  I loaded music on the "rocket" and later updated to update firmware to version 2.01.17.  Since the update the firmware, the music on my rocket (excluding the micro SD card, which I removed before updating firmware) appears as an unknown track.  Just below the unknown track is a version of the song with the title and artist.  How can I remove the unknown tracks from my device or otherwise add the title and artist to the track?

  I was able to delete the files 'ghost?' through MuCommander.  I have downloaded to download the program (which is free), and it allowed me to examine the files embedded on my Sansa Fuze.

• Unknown device & network controller in device for Lenovo G450 Manager

  Hi, in my lenovo G450 - with Chipset Intel - 3 GB of RAM (no external graphics card),

  I see an unknown device with question mark on device Manager, under Win XP. Further clicking on properties of the device tell me that--

  Device type: Other Devices

  Manufacturer: unknown

  Location: On Microsoft ACPI - controller embedded compatible.

  I installed all the drivers and that you have not installed the external devices such as USB etc.

  I don't get what device it could be.

  Network controller shows also with question mark, even after installing Broadcom Ethernet Driver for XP.

  Kindly help me what to do?

  Is there any order, where we need to install the drivers.

  Re-install the drivers ethernet and power management.

• Unknown device named "PCI data acquisition" and signal processing controller in Device Manager

  Greetings,

  Yesterday, my brother, who was running Windows 8.1 Overview on his Asus S400CA Ultrabook fell on a big problem of the NTFS partition corruption that made it impossible to recover through the Refresh Utility Windows 8.1. Given the situation, my brother decided it was better to go back to Windows 8, I had to install Windows 8 on their PCs by using an external DVD drive with a Windows 8 x 64 installer I already buy plenty of detail. The computer never asked me for a product key that I have read is normal in Windows 8 PC now having these embedded in the motherboard. So far an installation smoothly, but he's going to be delicate in the part of pilot facilities. Before you remove the computer I went to the Asus website and did my best to find the specific drivers for my brother's computer and downloaded the key drivers, chipset, audio, intel graphics card, bluetooth, trackpad Wireless LAN, LAN and Asus and installed. I used Device Manager to check that the drivers have been installed and which did not exist. I was able to get most of the drivers installed properly, however, said the Device Manager miss me the pilot of "Data Acquisition and Signal Processing controller PCI. Unfortunately I go to Asus website to see that if I can find the driver however, I can't do this right now.
  Check the attached screenshots for visibility...
  
  
  I also tried to use Windows Update to see if he could find the correct driver and unfortunately it's a dead-end. Because of that I write in this forum to see if someone can point me in the right direction when it comes to this missing driver (and others) indicated in the Device Manager.
  One last thing that I would ask is if I can use a utility like DriverMax to find missing drivers or should I go and install it manually?
  Thank you very much in advance for any help on this matter.
   
  Original title: cannot find drivers for Asus S400CA Ultrabook PCI

  Hi Mike,.

  Please keep us updated on the status of the issue. Please do not hesitate to answer, in case you need help with Windows in the future.

  Good,

  ASUS technical support according to my brother was a bit of a dead end, so I went to another Google search and found the culprit. I was missing the following drivers of ASUS:
  • Intel® dynamic and thermal platform frame driver
  • ASUS Wireless remote control (a driver for you to enjoy the airplane mode (Wireless) On / Off)
  The first pilot took care of the Acquisition of ICP data and Signal Processing controller and all but one of the unknown devices. Finally, the other took care of the last unknown device in Device Manager.
  I never thought that ASUS would use this a strange name for their driver because these names are extremely misleading.
  Other than that, I can finally say with certainty that the computer of my brother is back in business, and I can call this comprehensive process of restoration of Windows 8.
  Thanks for any assistance to Zaki J, I appreciate much all advice through this process!

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP & Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• WLST in embedded mode

  Hello

  I'm currently implementing wlst in embedded mode to automate a few creations of administration weblogic server configuration. I added the required jars in the classpath and tried to run the code. But the WLSTInterprester does not instantiate and threw under the exception:

  Exception in thread "main" java.lang.NullPointerException

  in java.io.File. < init >(Unknown Source)

  at weblogic.management.utils.PDevHelper.getUpgradeLaunchLocation(PDevHelper.java:77)

  at weblogic.management.utils.PDevHelper.getPDevClassLoader(PDevHelper.java:36)

  at weblogic.management.scripting.utils.WLSTUtil.setupOffline(WLSTUtil.java:226)

  to weblogic.management.scripting.utils.WLSTInterpreter. < init > (WLSTInterpreter.java:134)

  to weblogic.management.scripting.utils.WLSTInterpreter. < init > (WLSTInterpreter.java:76)

  to com.ncr.main.EmbeddedWLST. < init > (EmbeddedWLST.java:11)

  at com.ncr.main.EmbeddedWLST.main(EmbeddedWLST.java:27)

  Please help me solve this problem.

  Thanks in advance

  Think that I thought about it, you must set weblogic.home to point to a valid home. I was using JDeveloper 11.1.1.6 to extract the jars, but for a quick test, said a House WLS 11.1.1.7 and it worked. This got me past the NullPointerException, I just kept adding jars to correct exceptions ClassDefNotFound until he ran clean; Therefore, the minimum set that took my script

  It comes to my java command line (obviously split for readability).

  Java - cp

  . / bin:

  . / lib:

  . / lib/jython.jar:

  . / lib/wlfullclient.jar:

  . / lib/com.oracle.cie.comdev_6.3.0.0.jar:

  . / lib/com.oracle.cie.config-wls_7.1.0.0.jar:

  . / lib/com.oracle.cie.config_7.1.0.0.jar:

  . / lib/com.bea.core.xml.xmlbeans_2.1.0.0_2-5-1.jar:

  . / lib/com.oracle.cie.config-wls-schema_10.3.4.0.jar:

  . / lib/com. Oracle.Cie.wizard_6.1.0.0.jar

  -Dprod.props.file=./lib/props.txt

  -Dbea.home =

  -Dweblogic.home=/users/xxxxxx/projects/WebLogicServer/

  com.testing.wlst.WLST

  It is the output

  T3 connection: / / el01cn06:7599 with username weblogic...

  Connected to the Server Admin "AdminServer" which belongs to the domain "dev-web"

  WARNING: A non-secure protocol was used to connect to the

  Server. To ensure the safety of on-the-wire, the SSL port or

  Admin port should be used instead.

  There are 10 or clustered servers: web-cluster

  States of the servers are

  el01cn06-web08 - STOP

  el01cn06-web09 - STOP

  el01cn06-web10 - STOP

  el01cn06-web01 - running

  el01cn06-web02 - STOP

  el01cn06-web03 - STOP

  el01cn06-web04 - STOP

  el01cn06-web05 - STOP

  el01cn06-web06 - STOP

  el01cn06-web07 - STOP

  It's my embedded WLST class (hacked an example that I found through the Google Technology Institute)

  package com.testing.wlst;

  Import Java.util;

  Import weblogic.management.scripting.utils.WLSTInterpreter;

  Import org.python.util.InteractiveInterpreter;

  public class WLST

  {

  public static InteractiveInterpreter interpreter = new WLSTInterpreter();

  private static Sub connect()

  {

  StringBuffer buffer = new StringBuffer();

  buffer. Append ("Connect('weblogic','NoneOfYourBiz','t3://el01cn06:7599')");

  Interpreter.exec (buffer. ToString());

  }

  status() private static Sub

  {

  StringBuffer buffer = new StringBuffer();

  buffer. Append ("State ('web-cluster', 'Cluster')");

  Interpreter.exec (buffer. ToString());

  }

  Public Shared Sub main (String [] args)

  {

  Connect();

  Status();

  }

  }

• Editing error "folder with runtime embedded.

  I'm trying to publish a file 'Application with the embedded runtime' off Flash Pro CC. I get an error which indicates that some files that get packed with the SWF to create the application can be copied, according to me. The error message occurs at the end of the process once the SWF file was published and after that he tried to collect the AIR files.

  iMac 27 "3.4 GHz Intel Core i7, 8 cores of CPU, 32 GB of ram, OS X 10.8.4

  Flash CC Pro ver. 13.0.0.759 (updated)

  Error message

  Unknown error.

  unexpected failure: cannot copy

  java.io.IOException: cannot copy

  to

  com.adobe.air.nai.MacPackager.copyWithPermissions

  (MacPackager.java:54)

  to

  com.adobe.air.nai.AppBundlePackager.assembleInternalFiles(AppBundlePackager.java:52)

  to

  com.adobe.air.nai.Native Packager.createPackage (NativePackager.java:132}

  to

  com.adobe.air.ADT.parseArgsAndGo(ADT.java:572)

  at com.adobe.air.ADT.run(ADT.java:419)

  at com.adobe.air.ADT.main(ADT.java:469)

  I can publish the same exact file as an AIR package and make it work.

  I repaired my permissions on the off chance that Flash cannot access files because of the bad permissions.

  I'm not what my next steps should be. My cat with support NET nothing but the suggestion that I post on this forum. Anyone have any ideas?

  Thanks in advance

  I think I have solved this.

  Stupidly, I publish me on our server. Once I moved the file to my machine and published on my machine, it seems to have created a good file. If it turns out that I always have problems, that I'll be back with all the data you requested.

• I buy I phone 5 s of unknown source and I need for my apple ID to open

  I buy a new iphone from an unknown source and I need to unlock

  Sorry, but if you mean that it is locked to another Apple ID, then you're going to need help from the former owner or that the device doesn't help. If you do not find the former owner then your only option would be to try to get a refund there where you bought it. See find my iPhone Activation Lock - Apple Support

• Unknown error (-50) when you try to synchronize the phone

  I have a 6 s (iOS 10.0.2). iphone I have an iMac (27 inch, end 2012) running macOS Sierra version 10.12.

  I've recently updated my phone and my mac, (do not know if this is my problem). Tonight when I try to sync my phone, I get a message saying that "my phone can not be synchronized. An unknown error occurred (-50). »

  What is this error and how do I know what to do about an unknown error? When I looked for info and what to do, it seemed I might have to reset my phone to original settings and restore it. I'd rather not have to completely restore my phone (or mac) unless I absolutely have to. Any ideas or suggestions?

  Any help would be appreciated!

  This statement can help you If you see the error-54 when you synchronize with iTunes - Apple Support

• An unknown error occurred (9006) in restoring Iphone 5s

  OK, Im trying to restore my Iphone 5s, IE already I had updated to IOS 10 through my home Wifi connection page.

  At Midway after its done when he says "iPhone update software (file management)" error appears saying ".

  "" There was a problem downloading the software for the iPhone "iPhone" an unknown error has occurred (9006).

  Make sure your network settings are correct and your connection is active and try again. "

  I tried like 3 times and continues to be the same thing!

  My network settings are active and connected,

  Nothing works! :/

  Help, please!

  Have you ever tried these troubleshooting tips?

  Follow these steps to see if the problem is with your USB cable, a USB port or computer. Try again after each step:

  1. Use the USB cable supplied with your device. If you do not, try a different cable USB Apple.
  2. Switch to a different USB port on your computer. Do not connect on your keyboard.
  3. Plug it into another computer.
  4. If you still see the error, you can check for any other problem USB, with the third-party security softwareand the problems with hardware.

  copied from: get help with iOS update and restore errors

  If you try to restore through Wi - Fi, see if using iTunes on your computer will work instead. You will be able to download the firmware first, before it will be installed on the phone in a second time.

• Phone no ID number does not after updating ios 10, showing "unknown"

  Hi, I have recently updated to ios 10 on my iPhone 5s, after which my phone in the tab displays "unknown". Also I am not able to change a put my number inside. How to solve the problem? Asked me again activate Facetime and iMessage.

  Hello Milan_Mumbai,

  I think I understand your unknown phone number display in your settings. Also, you are being invited to activate new iMessage and FaceTime. These two issues have started after the update to iOS 10. I know not when it can be on your iPhone is not behave as expected after an update. I'm happy to help you.

  If there is a problem with your phone number in the settings, it could impact the iMessage and activations of FaceTime. First of all, I recommend you restart your iPhone. Restarting may solve many unexpected behaviours. Please use the steps below to restart if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, follow the steps below.

  1. Make sure that you are connected to a Wi-Fi network or cellular data. If you use an iPhone, you will need the SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your operator, you might be charged for the SMS.
  2. Go to settings > general > Date & time and make sure you have properly configured your zone.

  If you get an error when you try to activate FaceTime or iMessage

  Have a wonderful day!

• "The iPod could not be restored. An unknown error occurred (1433). »

  During an attempted - unsuccessfully - to restore an iPod Classic 160 GB end 2009 (model number A1238, 2173 EMC) model to its factory settings, I repeatedly met the following error message:

  "The '< name >' iPod could not be restored. An unknown error occurred (1433). »

  What can I do to fix this?

  Do the following If you find an error in the 1400 range when you restore or update iPod in iTunes - Apple Support

• Update iOS 9.3.5 failed on iPad. Now unable to update or restore to factory presets. "An unknown error has occurred (52).

  I tried to update my iPad for iOS 9.3.4 iOS 9.3.5 directly since the latest version of iTunes on Macbook Pro running the latest update of El Capitan. I tried the update of the iPad without iTunes, but he failed and showed the photo to connect to iTunes.

  The update failed to halfway through (don't remember the exact message) so I unplugged the iPad, restarted iTunes, and tried the update, but the update constantly fails with the message "an unknown error has occurred (52). I also tried via iTunes on my iMac running Yosemite, but has not as well.

  I did all the things listed here:

  https://support.Apple.com/en-us/HT201210

  The iPad was working fine before the update attempt.

  Is there than anything left to try? This iOS update broken my iPad?

  Have you tried to put the iPad into recovery mode?

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports