unlock - compressed code

Similar Questions

• Requirement of password "you have to change your unlock iPhone code access in 52 minutes.»

  My father is very upset and frustrated, and so I am. I hope that we can be compensated in some way (but probably not).

  My father unlocked his iPhone 5 as usual, then he got a notification on the home screen that says "password requirement you need to change your unlock iPhone code access in 52 minutes.»  We have never seen this before notifcation, and my sister and I have an iPhone more than 6/6.  I told my father to simply ignore it, but then he kept appearing whenever he has unlocked his cell phone, so I told her to choose continue.

  He chose to continue, changed the password from one to 4 digits long, and then he picked up his phone.

  Restarts, the phone prompts you to put in an access code to the first newspaper in attempt before it allows you to use the contact IDS.  It introduced the new password, but it didn't work.  He tried several times, and now it shows there are 60 minute wait.  At this point, it just goes to continue to put in the access code until it restores his phone.

  Why did this happen first? It has a 5 under AT & T's iPhone with the latest version of iOS.

  The new password longer trying to capture is correct, because when you create the password, it asks you to enter twice, and he could not continue if he does not get it right twice.  So why the code was not working?

  Hello gabemstr,

  Thank you for using communities of Apple Support.

  I see in your message that your dad's iPhone shows an error saying: requirement of password you need to change your unlock code.  It seems that your father has a managed iPhone, with a profile that is installed on it.  When a device is managed, it can have certain requirements for password as an age of access code.  I suggest your dad gets in touch with his staff, or deletes the profile.

  By default, the authentication of the user code can be defined as a six digit on taking devices PIN supported Touch ID or a PIN digit on all other devices. In iOS, you can choose from a comprehensive set of password policy to meet needs of your security. These access policies may include requirements for:

  • An access code on an iOS device

  • An alphanumeric value

  • Minimum length of password

  • Minimum number of complex characters

  • Maximum password age

  Password policies

  1. Delete the configuration profile provided with the application.
     • Go to settings > general > profile, tap on the configuration of the application profile.
     • Then click on delete the profile. If requested, enter your device password, and then press DELETE.
  2. Restart your iPhone, iPad or iPod touch.

  How to remove an application that has a configuration on your iPhone, iPad or iPod touch profile

  Take care.

• unlock bootloader code

  Hey there,

  Like a few other guys here, I tried to get a bootloader unlock code by

  http://developer.sonymobile.com/unlockbootloader/email-verification/

  several times.

  But I am not getting any email. I have also checked my Spam folder, read several messages in this forum and even contacted Support.

  They told me, that they are not able to help me. I mean, what kind of support is, even though they cannot help?

  Now, I hope someone here can help me. I don't want to use other means to unlock my phone.

  There may be additional support from developer.sonymobile.

  Thanks in advance!

  N Tony

  I tested it with my Gmail address and also business address but any email address should work.

  What happens if try you Gmail?

• Password requirement: you need to change your iPhone unlock access code within 60 minutes.

  Question:

  A couple of weeks, after unlocking my iPhone, I received a strange guest on my iPhone 5 (running iOS 9.3.1 not jailbroken) saying that I had to change my password within 60 minutes.

  Do not think much of it, I followed the instructions and changed the password via the guest. I didn't question the fact that it gives me options other than to choose a 4-digit password.

  After changing, I was again 2 weeks later (2 days ago from the drafting of the present) invited to change my password, except that this time I had 58 minutes to do this.

  I found this to be a bit sketchy so I did some research and there was no documentation of apple in this regard, only the forums a lot of other iPhone users who have experienced the same thing and forums have been dated as soon as 2012 (that I've seen in any case, could have been more before too).

  I rang apple support, and they were not aware of this problem because it was not a feature for iOS which made this place and recommended I reset my settings immediately (by going to settings > general > reset > reset all settings). This resets all settings, does not erase your data.

  It was my personal guess that if it was actually a malware, it can be connected to the operating system in some ways because the first time, I changed my password via the command prompt and it worked. So I made the decision to back up everything I wanted to keep manually and not through iTunes, then manually to get any return. This may have been unnecessary, but it is still I think that all these recent iTunes backups I had had this problem.

  If it was in fact malicious, I don't know what kind of access he could have had on my phone, either data or another. I may be a bit paranoid, but wanted to stay on the safe side as pretty much everything, I was put in place and connected to my phone. I went the full length and changed a lot of the settings for the accounts I have. Yet once, probably wasn't necessary, but safely.

  So if you feel yourself, just know that it is not created by apple and you at least have to reset your settings.

  I hope that it doesn't matter what lightens!

  

  PS Ce isn't a screenshot I took, this is one I found on another thread stackexchange (source: http://apple.stackexchange.com/questions/124771/is-the-message-you-must-change-y our-passcode-within-60-minutes-valid-non...). Although he is exactly got me

  Please, it is an old problem that you have learned you looked in the forums before proceeding with such a long and useless post. I'm sure you mean well, but one of the elements discussed in the communities of Apple - terms of use support is first search the forums about your problem before posting. Scams such as these were widespread and often identified - too often.

• How to unlock region codes in windows media player

  Windows media player 11

  As a general rule, area Codes are defined in a DVD player and not in Windows Media Player.

  'DVD région Code'
  <>http://en.Wikipedia.org/wiki/DVD_region_code >

  HTH,
  JW

• CODE of THE CARRIER DO WORK of UNLOCKING blackBerry Smartphones?

  Might help some one please! I bought my carrier unlock mep code "Wind Mobile Canada ' I followed the steps on how to enter mep # s in and I get error." Called my operator crossed the IMEI # s everything matches code they game me corresponds to tried again and I still get the error in my opinion the gave me a wrong code, they say that it is the right 1 they got her BlackBerry. So now, that I had no idea was to turn to I got 2 trys left... My IMEI is #.

  could someone pls PM me with a code to c if it corresponds to a wind gave me thank you...

  EDIT: For your security, personal information such as lMEI are prohibited. Please see the guidelines of the user   under article ""be sure to." "

  Hello and welcome to the community!

  The provider, you, the unlock code is solely responsible for this code. Before exhaust you your attempts, you should talk to them some more about 1) fixed it 2) what they will do to you if they insist you keep trying and then exhaust all attempts (so hard - lock, leaving only the factory RIM able to unlock).

  No matter who is responsible (WIND or RIM), the WIND is your only source of use... they can degenerate into RIM if they can't understand it. You have no channel to seek help directly from RIM, without going through the WIND. You work with WIND and climbing through them.

  Good luck!

• Why open the cover on my iPad Air is more directly shows the PIN code screen

  Hello

  After installing iOS 10, when I opened my iPad original air cover (with magnet) I suddenly need to do something extra to access the unlock PIN code screen. I used to be able to enter my PIN to unlock immediately.

  It's really annoying, that I almost never use the home button on my iPad, simply open the lid is allowed to enter the PIN to unlock and start to use the iPad. Now, I have to first press the home button, it means an additional gesture.

  Y at - it an option to go back to the old behavior again? I really don't like it.

  Kind regards

  Iskander

  Hello

  Some things have moved go in display & its right brightness settings

  The screen lock / unlock.

  See you soon

  Brian

• Update of IOS 10 - code &amp; disabled fingerprint

  Everyone has updated to the new IOS10?

  I'm running a new iPad Pro 9.7 128 GB

  I've just updated to IOS10

  Once completed, I went through the new welcome.

  My iPad locked after leaving for a minute, I don't then he went to unlock it, you say, click on the home button to open

  no code for access or fingerprints fingerprint scanning required.

  I went into the settings and password enabled, it is enabled. (he asked me for the password to access this function)

  I've seen the scans of fingerprints, they were always there.

  Then, I deleted two fingerprints and remove the password.

  I rebooted my iPad and then returned in parameters and activated the access code and added fingerprints

  I blocked my iPad.

  Then I pressed the home button to turn it on so I could unlock.

  He then said press the home button to unlock, no code for access or fingerprints fingerprint scanning not required.

  This is an issue that has been neglected on the new IOS10?

  Do you use the fingerprint which is recorded on the iPad?

  Thought I had the same problem. Tried a different fingerprint that is not registered and it could raise the access code. Took, the home button is automatically recognizing the characters of the figure.

  Interesting what others have to say.

• Impossible to unlock the phone after the update to 9.3.1

  I have updated my phone to 9.3.1 and couldn't unlock the phone. I tried to restart, but it id has been ineffective. Please let me know the solution for the problem.

  MY CONTACT IS COMPLETELY SENSIBLE. WAT IS D SOLUTION TO THIS PROBLEM?

  What kind of "unlock" do you mean? The screen of 4 or 6 digit code unlock? Or find my iPhone lock Activation?

  If the unlock code from the screen, you need to restore iOS if you forgot your screen unlock code. Contact ID does not work after an upgrade, power off or reboot; you need the unlock screen code the first after one of these events. See: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Why MATLAB cannot read wav files OR? Mind wav compression errors.

  I write, 1-n-channel, 24-bit wav files using the standard vi OR its file Open/Close/Write (DBL) found in LabVIEW 8.6\vi.lib\sound2\lvsound2.llb. This application data are acquired from a NOR-9234 via USB-9162 or NOR-cDAQ-9172. My wav files are readable by many readers of wav, including media player file (channels 1-2), SoundForge, and my own readers of LabVIEW wav file. However, MathLab is unable to read these files, saying they cannot deal with compressed wav format. As we read in the documentation of NOR, these files are decompressed. I found a player wav to header via the discussion forums and read my wav file. The compression code that was printed was-2 instead of 1 for uncompressed. Anyone had similar problems reading in MATLAB? Someone knows something about the importance of a - 2 for compression? My guess is that there is a word size problem here that MATLAB cannot process or NOR is not properly function.

  Well, I learned a little more since last we spoke. The standard MatLab wav player is wavread.m. This script must be able to read multi channels 24 bit files; but he does not read files from LabVIEW. We find a change to this script, called wavexread.m, which was developed to read wav files that use WAVE_FORMAT_EXTENSIBLE. This format was developed by MS as an extended format to write multi channel + 24 bit files with more information included. LabVIEW wav files are readable by MatLab via the use of this script. Basically the script ignores formatting as if the compression for the PCM format setting was set to 1 (instead of-2 or, as we know it, "FEFF"). I tried rewriting the file binary wav and replaced the "FEFF" with "0100". This file is readable by the wavread.m of stock but not the wavexread.m extended; hiliting besides the fact that MatLab do not really care.

  However, I'll throw this back order to ask whether it is really necessary to use the extended format to write these files when the standard format would be sufficient. It sure would have made life much easier if my client did not need to worry about this.

  Thanks for your help.

• Keyboard not Smartphones blackBerry for PUK Code

  Hi all, I locked Blackberry Vodafone UK private and I have the device like many code unlock PUK code. I tried to get unlocked code of the device several times and whenever he said "unlock code fails" and after that he claims now PUK code. Here, the tragedy is that to enter the PUK code the virtual keyboard does not appear on and if I try to type it with the physical keyboard not typed anything, otherwise the two keyboards are perfect after work the priv on wifi and I type messages and emails. No idea what has happened?

  Two copies:

  • https://supportforums.BlackBerry.com/T5/Priv/no-keyboard-for-PUK-code/TD-p/3182132#nobanner

• Change code while debugging

  Is it possible to change the code to test the new values while you're debbuging.

  Unlock the code editor and change the text to test new things has really worked for me and having to stop debugging change values and begin to debug once again, I would really like to know if there is a way to avod this

  Edit:

  Also, how can I add an another emulator at the JDE. I would like to add the (8700 series emulator, I installed it, but I can't find how to configure it on the JDE

  "Is it possible to change the code to test the new values while you are debugging."

  I'm not aware of a way to change the java instructions without recompile and reload - restart i.e. the Simulator.

  Relative to the modification of the values, I presume you are aware that on a breakpoint, you can modify the values that you like, for example to replace an int value between 1 to 2, or a string value of 'A' to 'AA '.  One of the windows in the JDE shows these things.

  «can I add an another emulator at the JDE»

  Yes, you can the JDE these picked up automatically thinking.  Take a look at this son:

  How to add some old JDE 4.5 to 4.6 JDE Simulator?

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=5773

  And for Eclipse:

  Add Simulator to Eclipse JDE-Plugin

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=17254

  However, I'm guessing that you are running a level more late JDE.  Ensure that the operating system in your simulator of 8700 is the same or higher than that.  I think that there is 8700 SIms for 4.1 and 4.5 only.

• Hello everyone,

  I m in Beijing and my phone was stolen, I can't locate my phone of the firewall in Chinese, I'm afraid they get all my information in unlocking my code I have m...

  If the aircraft had a password, then your data is safe. Have you enabled find my iPhone? If so, the device would be locked with locking Activation. Any attempt to restore/enter the device would lead to erase.

• Problem with the iPhone OS. Have to restore it several times and it now has white screen flashing with Apple logo

  Got my iPhone SE a little over a month since the Thailand of the Apple Store.

  First he couldn't restore entirely made from a backup so I had to delete all data and content then restored again. Then try to restore from a backup, still have problems (apps froze, failed to synchronize all of the apps, then tried to shutdown phone and glued on white background with the Apple logo).

  Try to third, I put my phone in recovery mode and restore as a new iPhone. All original content is now gone. Should it start again.

  Then small annoying problems occurred. For example, I could not find applications in the App Store, could not download new free applications, could not buy music on the iTunes Store app. It seems that Internet was frozen, when in fact it works always fine when try browsing on Safari. Facebook froze and could not push Home button to close App game graphics making static sound glitches but always disappear when him restart the application. Can't post photos on a social media application because my whole library of photos seems to be empty, when in fact he was always there. When I was taking pictures, the preview images were extremely blurry, and when checked in Photos app there is no trace of this photo that I took. I tried to close all the applications and open it again but the problem still persists. So I close the phone and restart it just to find that it stuck on the white screen with the Apple logo once more. Then, I took the phone to the Apple service provider. They restore the phone as a new iPhone for me and I had to start over once again. Only 4 days after this, my iPhone application suddenly found me a new unlock access code within 60 minutes without reason. I have to reset hard to solve the problem. And after that, the same day, my iPhone starts to blink on and outside and sometimes the white screen with the Apple logo appears.

  Whenever I said my problem of staff Support from Apple or the Apple service provider, they told me that it was a software problem. How can I when I do all these problems again and again from the beginning until now? Can anyone suggest me the right way to solve this problem? What problem do you think it's from? I can't take this anymore. I need a good show, not working iPhone undesirable. I can't keep it restore/reset/reboot over and over again like this. Please, help me.

  Sasawan

  You can watch some of my problems here on Youtube > >

  1 screen kept flashing white background with the logo apple and restart and turn off by itself. Sometimes I can go past lock screens, but it only last a few minutes, then it starts all over again > > https://youtu.be/tfygV57NmmY

  2 message when my phone push me to reset my unblocking reason code > > https://youtu.be/a_AKPWxfAfs

  3 static glitch sound on the Sims Freeplay game > > https://youtu.be/qw12RZ4yMqc

  Take it to an Apple Store for the assessment of the guarantee.  If you have restored to factory settings, and these problems persist, there is a hardware problem, no matter what you' re said.

• Lock phone and Bluetooth

  Ok. I have a roadster for my car that I love! My problem, that I am convinced is the phone.
  
  When I hit the button for the command, on the roadster (call) of telephone communications without problem, works fine. If my phone is idle for a certain time, I hit the button on roadster... nothing! I have to turn on the screen of my phone... put in my unlock code, then the voice command of roadster works very well yet.
  
  Once the time locks phone it no longer responds. Having to pick up the phone and unlock with code every time I want to do a sort of call defeats the idea of hands free. Incoming calls never a problem.
  
  This happens even if the phone is the streaming of music all the time. If I don't do everything first unlock phone it does not! I want your hands free, not pick up phone, press the power button / stop, enter the pin code while driving.
  
  Any ideas?

  Go into the Menu and settings, under Security, you can check the box 'allow Bluetooth bypass' this will allow you to use your roadster, even when your phone is locked.