4 Remote Desktop Protocol k

Similar Questions

• Remote Desktop Protocol v8.08 on IOS (IPAD) - constant disconnects since update to the new version.

  Given the issues with RDP 8.08 updated on my IPAD in July 2014.  I am able to connect to my Windows 7 remote desktop, but a refresh of the screen is very slow and disconnects often occur. Any ways to configure my Windows 7 destop for better behavior?  Thank you.

  Hello Susan,

  Because the problem is Remote Desktop Protocol v8.08, I would ask post you the question on the Clients of remote office on TechNet forum.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winRDc

  Feel free to post on the Microsoft Community, in the case where you encounter problems when you are working on Windows.

  Thank you.

• RDP (Remote Desktop) protocol for windows 8.

  Y at - it a RDP (Remote Desktop) protocol for windows 8. If there were can I find? Is it free?

  Y at - it a RDP (Remote Desktop) protocol for windows 8. If there were can I find? Is it free?

  RDP or DRC?  Protocol - of course.  Customer - Yes.  The part you need remote control * in * said machine Windows 8... Depends on the edition...

  The remote desktop client is there... you can remote in other Windows machines using that.

  http://en.Wikipedia.org/wiki/Windows_8_editions#Comparison_chart

  http://Windows.Microsoft.com/en-us/Windows-8/Remote-Desktop-FAQ

  http://techingiteasy.WordPress.com/2012/03/13/how-to-use-remote-desktop-in-Windows-8/

• Is there a logfile associated with Remote Desktop Protocol

  Is there that a saved log file showing what that a person has the RDP servers/workstations had in? Where is this saved file as well?

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Remote Desktop does not connect Win 7 on Win XP pro.

  The two turned on, remote active and available on the same network. I tried to connect by the name and Ip address, but I still get the error message. Remote Desktop cannot connect to one of these reasons: 1 remote control, access to the server is not activated 2 remote computer is disabled 3 remote computer is not available on the network.   I have connected before. In fact, I went to my computer in a click with the right button on the computer in the access network, it could not connect. He gave me the opportunity to diagnose the problem, so I chose it. The result of the diagnosis was the computer appears to be correctly configured but (computer) does not. I recently, during the last week, the object a new copy of windows xp pro on the computer and I have connected with access to distance since.  Why can't connect now?

  Check your firewall and router, the remote desktop protocol uses port 3389, this port must be opened.

  John

• Looking for a TV compatible projector network or remote desktop

  Does anyone know any model for TV which have integrated network layout and support the network of Windows Vista/7 projector or the Remote Desktop Protocol?

  Hello

  You may need to use your favorite search engine to get the details of television that can support the projector network or remote desktop.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Problem with remote desktop in Windows 7 Home Premium

  I have two laptops running Windows 7 Edition Home Premium.  I do a simple administration of a 2008 R2 remote server, for a friend and all of a sudden, remote desktop will not connect to the server on one of the laptops.

  I checked all the settings, of course, and the problem is NLA.  I get the error message: requires NLA (Network Level Authentication) that your computer not only supports the remote computer that you are trying to connect to.

  I thought it was strange that I never set the server to require NLA.  I know I should but anyway...  I checked that the server is in fact not the value require NLA, so this should not be preventing the connection.

  Now, two laptops have DRC version 6.2.9200, but non-functioning LT said that NLA is not supported in the "information" window.  Two portable computers support Remote Desktop Protocol 8.0 

  Even if NLA is not required on the server, if it is set to the work of LT, why not at least try?  Even if it's just to eliminate a point of failure.  None of this is hard, right? Bad...

  I went in the LT does not work to change the DRC to allow the NLA (System, remote control properties) However, there is nowhere where do...   There is an option to "Allow remote access" button and an "Advanced" button.  Under the "Advanced" button, there are two elements to control the limits of the use of remote assistance.  There is an option button to enable remote assistance and the other to set the amount of time that the remote computers can be connected.  Nothing to control NLA.   On the functioning LT, which has the same version of the DRC, IT IS A PLACE to CHANGE NLA.  I'm confused.  How the same version of DRC can have two different menus?

  Just for fun, I tried even to DRC running in compatibility mode.  Nothing...

  Is there a registry change that will allow me to activate it?  I do not always have access to the laptop works.  I need to bring both work.

   

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Section of remote desktop connection has been disconnected due to the protocol error

  I used Windows 7.

  I first run the Windows Firewall with advanced security. Then I run Remote Desktop connection. He began to load (as many times before) and then all of a sudden has generated a message from remote desktop connection "because of a protocol error, this section will be disconnected. Please try again from the remote computer"

  However, try as I might I was unable to connect more.

  I tried first in order to run the Windows Firewall with advanced security, then VNC Server nun, then on connection desktop remotely, but it does not work. Sometimes, I get a message that the remote desktop connection was busy. I turned off my PC, but did anyway.

  I'm doing something wrong? Could you please give me a hand? Thank you in advance.

  Irina

  Hi Irina,.

  Please contact Microsoft Community. The query you posted here would be better suited in the TechNet forum because the question is about Remote Desktop connection. You can post using the link below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• Remote Desktop - due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected

  Original title: Remote Desktop

  I get strange messages when trying to do Remote Desktop (and also connect using Logmein). Sometiems I get this:

  Due to the protocol error detected at the client level (code 0 x 1104), this session will be disconnected.
  Try to reconnect to the remote computer.

  Sometimes:

  Due to an error in data encryption, this session will end.
  Try to reconnect to the remote computer.

  For Logmein, I just get a mismatch. I'm running Windows 7 Pro sp1

  Can someone help here?

  Hi Peter,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

• Windows Server 2012 Remote Desktop "flicker/crash.

  I am running Windows Server R2 Standard 2012 on a server.

  When multiple users use RDP (Remote Desktop Connection) to connect to the server says, those who log after the first connected user (i.e. the user 2, 3, 4... etc) experience a "flicker" of the desktop and applications open close for said flicker when they try to open any application.

  So to explain step by step, once connected to the server using the RDP Protocol, the Server Manager application opens (the only application affected by flicker). Suppose I want to open the Task Manager, so I go to the taskbar, do a task manager, right click. Then the box office disappears for a time, including the taskbar and the background, while the application server manager remains open.

  This happens for all applications other than the Server Manager.

  In addition to this, the first connected user is also affected do not experience the flicker and can run programs as usual.

  As far as I can tell that this has happened since the beginning of the installation of windows.

  My first guess would be that the explorer.exe is crashing, but I can't really verify the said Task Manager.

  I don't have physical access to the server, only a remote connection.

  Everyone knows something like that?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• The success, but AnyConnect VPN cannot remote desktop

  Hi all

  I have a problem when I am unable to remote desktop in any PC LAN when I am connected via VPN.  I can ping all the nodes inside the network and I can open a web page from my local PC address inside, as well.  So it seems like it was only the RDP (3389) is affected.  Remote access for PCs are turned on, as I am able to get to them via a different method (SBS Remote Web Access).

  I'm a bit new to ASAs, so any help is greatly appreciated.  TIA

  ASA 5505

  ASA Version 8.2 (5)
  !
  host name asa
  activate the encrypted password of IqUJj3NwPkd23LO9
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  name 10.0.1.0 Net-10
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  switchport access vlan 3
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.1.98 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  11.11.11.11 IP address 255.255.255.0
  !
  interface Vlan3
  No nameif
  security-level 50
  192.168.5.1 IP address 255.255.255.0
  !
  passive FTP mode
  object-group service RDP - tcp
  EQ port 3389 object
  TSTGRP_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  inside_nat0_outbound list extended access permits all ip Net-10 255.255.255.224
  inside_nat0_outbound list of allowed ip extended access all 12.0.1.0 255.255.255.224
  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 12.0.1.0 255.255.255.224
  inside_access_in of access allowed any ip an extended list
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  mask IP local pool SSLClientPool-10 10.0.1.1 - 10.0.1.20 255.255.255.128
  12.0.1.1 mask - 12.0.1.20 local pool IPSec-12 IP 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside_access_in access to the interface inside group
  Route outside 0.0.0.0 0.0.0.0 11.11.11.11 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  LOCAL AAA authorization command
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = not - asa .null
  pasvpnkey key pair
  Configure CRL
  string encryption ca ASDM_TrustPoint0 certificates
  certificate fecf8751
  308202da 308201c 2 a0030201 020204fe cf875130 0d06092a 864886f7 0d 010105
  31153013 06035504 03130c 70 61732d 61 73612e6e 756c6c31 16301406 0500302f
  092a 8648 86f70d01 09021607 7061732d 61736130 33303530 36323134 1e170d31
  3131365a 170d 3233 30353034 32313431 31365a 30 2f311530 13060355 0403130c
  7061732d 6173612e 6e756c6c 01090216 07706173 4886f70d a 31163014 06092, 86
  2D 617361 30820122 300 d 0609 2a 864886 f70d0101 01050003 82010f00 3082010 has
  00dc6f5c 02820101 584be603 1219ad4a 43085 has 97 b8fd7e33 c887933d 1b46dbca
  deada1da 7689ab5e 9b6fa20b d6f7e5e3 049285e7 65778c 15 a9447e1e 8ba749cb
  61e0e985 9a90c09f b4c28af0 c6b5263c d2c13107 cce6c207 62f17cbe 99d9d5c2
  25c035e4 86870084 ea9ab8ae 8b 664464 40305c4d e40dd774 506f6c0a 6f4ca4d1
  0c81d2dd bcdc8393 3f4fbcba 1b477d45 af862bdf 50499615 7b9dac1b 502063b 8
  67252db8 1473feec c39d9c32 9d9f3564 74fdf1bd e5ad6cba 999ae711 ca 71, 9310
  c381347c a6508759 eb405cc0 a4adbe94 fb8204a2 382fad46 bc0fc43d 35df1b83
  6379a 040 90469661 and 63868410 e16bf23b 05b724a3 edbd13e1 caa49238 ee6d1024
  a32a1003 af020301 0001300d 4886f70d 01010505 00038201 010084b 1 a 06092, 86
  c96aeec0 62698729 4e65cace e6f2e325 62909905 df31fbeb 8d767c74 395b 9053
  434c5fde 6b76779f 278270e0 10905abc a8f1e78e f2ad2cd9 6980f0be 56acfe53
  f1d715b9 89da338b f5ac9726 2de50629 34520055 55d1fcc5 f59c1271 ad14cd7e
  14adc454 f9072744 bf66ffb5 20 c 04069 375b858c 723999f8 5cc2ae38 4bb4013a
  2bdf51b3 1a36b7e6 2ffa3bb7 025527e1 e12cb2b2 f4fc624a 143ff416 d31135ff
  6c57d226 7d5330c4 c2fa6d3f a1472abc a6bd4d4c be7380b8 6214caa5 78d53ef0
  f08b2946 be8e04d7 9d15ef96 2e511fc5 804c402b 33987858 46a7b473 a 429, 1936
  681a0caa b189d4f8 6cfe6332 8fc428df f07a21f8 acdb8594 0f57ffd4 376d
  quit smoking
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 192.168.1.100 255.255.255.255 inside
  SSH 10.0.1.1 255.255.255.255 outside
  SSH timeout 5
  Console timeout 0
  dhcpd auto_config inside
  !
  dhcpd address 192.168.1.222 - 192.168.1.223 inside
  dhcpd dns 11.11.11.12 11.11.12.12 interface inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL-trust outside ASDM_TrustPoint0 point
  WebVPN
  allow outside
  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
  SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
  enable SVC
  tunnel-group-list activate
  internal SSLClientPolicy group strategy
  attributes of Group Policy SSLClientPolicy
  VPN-tunnel-Protocol svc
  attributes of Group Policy DfltGrpPolicy
  value of 11.11.11.12 DNS server 11.11.12.12
  Protocol-tunnel-VPN IPSec webvpn
  username, password test 1w1. Encrypted F5oqiDOWdcll privilege 0
  username test attributes
  VPN-group-policy SSLClientPolicy
  test1 lQ8frBN8p.5fQvth encrypted privilege 15 password username
  username, password test2 w4USQXpU8Wj/RFt8 encrypted privilege 0
  name of user test2 attributes
  VPN-group-policy SSLClientPolicy
  username password test3 SC8q/LweL74qU0Zu encrypted privilege 0
  test3 username attributes
  VPN-group-policy SSLClientPolicy
  attributes global-tunnel-group DefaultRAGroup
  address pool IPSec-12
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared key *.
  NO-SSL-VPN Tunnel-group type remote access
  General-attributes of the NO-SSL-VPN Tunnel-group
  address-pool SSLClientPool-10
  Group Policy - by default-SSLClientPolicy
  NO-SSL-VPN Tunnel - webvpn-attributes group
  enable PAS_VPN group-alias
  allow group-url https://11.11.11.11/PAS_VPN
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  privilege level 3 mode exec cmd command perfmon
  privilege level 3 mode exec cmd ping command
  mode privileged exec command cmd level 3
  logging of the privilege level 3 mode exec cmd commands
  privilege level 3 exec command failover mode cmd
  privilege level 3 mode exec command packet cmd - draw
  privilege show import at the level 5 exec mode command
  privilege level 5 see fashion exec running-config command
  order of privilege show level 3 exec mode reload
  privilege level 3 exec mode control fashion show
  privilege see the level 3 exec firewall command mode
  privilege see the level 3 exec mode command ASP.
  processor mode privileged exec command to see the level 3
  privilege command shell see the level 3 exec mode
  privilege show level 3 exec command clock mode
  privilege exec mode level 3 dns-hosts command show
  privilege see the level 3 exec command access-list mode
  logging of orders privilege see the level 3 exec mode
  privilege, level 3 see the exec command mode vlan
  privilege show level 3 exec command ip mode
  privilege, level 3 see fashion exec command ipv6
  privilege, level 3 see the exec command failover mode
  privilege, level 3 see fashion exec command asdm
  exec mode privilege see the level 3 command arp
  command routing privilege see the level 3 exec mode
  privilege, level 3 see fashion exec command ospf
  privilege, level 3 see the exec command in aaa-server mode
  AAA mode privileged exec command to see the level 3
  privilege, level 3 see fashion exec command eigrp
  privilege see the level 3 exec mode command crypto
  privilege, level 3 see fashion exec command vpn-sessiondb
  privilege level 3 exec mode command ssh show
  privilege, level 3 see fashion exec command dhcpd
  privilege, level 3 see the vpnclient command exec mode
  privilege, level 3 see fashion exec command vpn
  privilege level see the 3 blocks from exec mode command
  privilege, level 3 see fashion exec command wccp
  privilege see the level 3 exec command mode dynamic filters
  privilege, level 3 see the exec command in webvpn mode
  privilege control module see the level 3 exec mode
  privilege, level 3 see fashion exec command uauth
  privilege see the level 3 exec command compression mode
  level 3 for the show privilege mode configure the command interface
  level 3 for the show privilege mode set clock command
  level 3 for the show privilege mode configure the access-list command
  level 3 for the show privilege mode set up the registration of the order
  level 3 for the show privilege mode configure ip command
  level 3 for the show privilege mode configure command failover
  level 5 mode see the privilege set up command asdm
  level 3 for the show privilege mode configure arp command
  level 3 for the show privilege mode configure the command routing
  level 3 for the show privilege mode configure aaa-order server
  level mode 3 privilege see the command configure aaa
  level 3 for the show privilege mode configure command crypto
  level 3 for the show privilege mode configure ssh command
  level 3 for the show privilege mode configure command dhcpd
  level 5 mode see the privilege set privilege to command
  privilege level clear 3 mode exec command dns host
  logging of the privilege clear level 3 exec mode commands
  clear level 3 arp command mode privileged exec
  AAA-server of privilege clear level 3 exec mode command
  privilege clear level 3 exec mode command crypto
  privilege clear level 3 exec command mode dynamic filters
  level 3 for the privilege cmd mode configure command failover
  clear level 3 privilege mode set the logging of command
  privilege mode clear level 3 Configure arp command
  clear level 3 privilege mode configure command crypto
  clear level 3 privilege mode configure aaa-order server
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:7f67d8c8b24bc533cf546b545aa33327

  Looks like traffic is underway for RDP but there is no response packet

  7: 22:24:58.824954 802. 1 q vlan P0 10.0.1.1.49162 #1 > 192.168.1.20.3389: S 3361152799:3361152799 (0) win 65535

  8: 22:24:59.824740 802. 1 q vlan P0 10.0.1.1.49162 #1 > 192.168.1.20.3389: S 3361152799:3361152799 (0) win 65535

  This can result from Neatgear (192.168.1.1), drop the packets. You can have solutions on SAA by tapping the traffic on the inside of the interface on the ASA. Here's what you need to do:

  vpn_nat_inside 10.0.1.0 ip access list allow 255.255.255.0 192.168.1.0 255.255.255.0

  NAT (10 vpn_nat_inside list of outdoor outdoor access)

  Global interface (10 Interior)

  This pat only vpn traffic entering the pool and will not have effect on anything else.

  Kind regards

  Bad Boy

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• Without the mode remote desktop connection full screen

  Surface 3 Remote Desktop connection will not be full screen in my window size making it full-screen small enough. How can I change that. I find nothing in the framework for the RDP Protocol.

  Hello James,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  You can press "CTRL + ALT + BREAK" keys to switch between full screen and window mode.

  However, for additional assistance, please ask your question on TechNet forums where you can get assistance for IT professionals.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itpronetworking

  I hope this information helps.

  Thank you

• How to purge incorrect DNS names in Apple Remote Desktop Version 3.8 (A 380, 95)

  Environment: Community College, Microsoft DHCP 2012/DDNS network

  Question:

  I've got ~ 140 iMacs with 13% to appear in my Apple Remote Desktop (ARD) scans as having correspondence name vs DNS name of the network.

  I suspect this affects refusal to license for our products Adobe CC. How can I clear the fields name DNS ARD again be filled properly?

  Hi gwanupnorth,

  After checking with file-> Refresh in ARD Admin and there are still agents machine correct without DNS:

  -Check in the list of the scanners of ARD Admin, if the machines of 18 or more are detected it with the correct DNS name.

  -If Yes, click on each one and update the username: password: and it should update the corresponding entry in all computers.

  HTH,

  Cheers, dwbrecovery

• Remote Desktop does not work since MacOS Sierra update

  Unable to connect with Remote Desktop or cord that worked before update

  Greetings geoffshop,

  Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
  I recommend you read this article, it has the settings you want to check to make sure that it is able to work.
  

  macOS Sierra: allow remote desktop to access your computer

  Take care.

• Why is my Apple remote desktop not send software upgrades as it should?

  Apple Remote Desktop Help?

  In apple remote desktop there is command-line unix where I can send the command softwareupdate - install - all, and I do as user root on an administrator account. My problem arises when I send the software update and ARD never Specifies if yes or no updates have been installed successfully, it just says: Update software tool. I know that it is not to install the update either, because when I look at computers I see pending updates. I'm new to the apple support and appreciate any help in this matter. Thank you

  have you tried:

  Send the command as root

  the "softwareupdate d-i - a" command?

  Try issuing the command to one computer at a time. If you issue it to 100 computers. Your network can choke on the bandwidth required to download all the updates to those. Keep in mind that softwareupdate is for upgrades of the OS; It will not install the updates of pages or other app store apps.

  If the command works, you'll probably want to restart the computer. If everything is working properly.