Unnecessary error messages

Similar Questions

• ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

  I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY.  ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE.  THE OPERATING SYSTEM IS WINDOWS 7.

  Mahamoud,
  Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
  
  Here is the solution I found to this problem:
  I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
  Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
  Replacement of the restored cartridge the printer functionality.
  That's the good news.
  Now the bad news: for HP.
  The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
  All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
  Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?

  (I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
  I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.

• Error messages that tell me NOTHING!

  Why do I get error messages that tell me nothing? For example, I am trying to save a file on my computer XP (I am currently working with 3 machines, each of the XP, Vista and Win7); the proposed file name is simple and contains only letters, numbers, spaces, and perhaps a dashboard, but no characters such as *, /, (or). I get an error message that gives me the name of file, in this case Islnd smplr resz - E4878. JAN, said only "the name of the file above is not valid."  This tells me absolutely NOTHING!  No clues to explain WHY the name is not valid, how to solve this problem, no help AT ALL!  It's extremely frustrating, and I'm not playing "Guess What's On My Mind" with a tenacious computer fun. Microsoft, if you're going to have error messages, make sure they actually provide useful information!

  One thing you might try is to save it as something even more simple - like "A.JAN" and later [try] rename.

  Another possibility, in that you might be running is the limitation that the complete file, including its full path name, should not exceed 256 characters.  Whenever this happens, the error messages given by Windows are extremely obtuse and unnecessary.  The name of your file is relatively long, this is a possibility.

  ""Filename is not valid"error save or open the file.
    <>http://support.Microsoft.com/kb/131464 >

  HTH,
  JW

• Get rid of alignment and error messages notifications genuine HP cartridge

  The product name and number: HP Deskjet 3050 a

  Operating system: Windows XP

  Error message (s):

  1. your are not aligned on your print cartridges

  2. you have a used or counterfeit ink cartridge

  Changes to the system: I opened the door to the lander to find the product.

  Problem #1:

  I can't print a correct alignment page because my color ink cartridge is out.  I don't have the impression of color - I am a teacher, and it comes to my computer in the classroom.  I can't afford to buy an ink cartridge of color that will not be used and only dry.  (If someone makes a black ink-only all-in-one, I would buy it in a blink of an eye).  I get a message before each print job, and after each print job advising me that I have have not aligned my print cartridges. I KNOW that I've not aligned their.  On every other printer I've ever had, these messages disappear after I click on "Don't align."  Not on my HP Deskjet 3050's!  I see these messages up to 40 times a day, and he drives me over the edge.  Other than the purchase of one ink color or clamping cartridge this printer in the trash and buy a Lexmark, how do I get rid of these messages?

  Problem #2:

  Added to messages "SNAP SNAP ALIGN" infuriating, as of today, I also get a nice "is a cartridge of ink used or infringement" whenever I print.  Guess how many times I get THIS message every time until I am allowed to print? THREE TIMES! So if I print 20 pages per day which is 60 FREAKING additional unnecessary and false messages I get after trying to find my product number for technical support for the first problem. How can I get rid of this new message?

  Sorry for the snark, but it was a heck of a day in the land of HP.  Thanks in advance for any assistance you can provide

  Sincerely,

  A customer of HP printer long of life (and perhaps soon-to-be-former)

  The software that allows this printer to work on Windows XP doesn't have an option to disable this feature. These are messages of maintenance of the printer and the software should show them.

  I don't know of a workaround for this either. I hope this helps.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• Windows Defender error message "this operation has been cancelled due to restrictions in effect on this computer."

  Ana I try to access Windows Defender, I get the message "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. "I am the administrator of the system and connected. What can I do to clear this up?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Windows Defender gives me the error message: 0x800106ba

  When I try to open Windows defender, I get an error message, Windows defender encountered an error: 0x800106ba a problem caused this program to stop the service, I have several questions and you want to open Defender to find out if I have a virus, I have kaspersky antivirus and Microsoft Security databases both on my computer, can you give me some suggestions?

  Hello

  only use Kaspersky or MSE, not both

  two installed anti-virus can cause accidents and problems with the system

  Uninstall one of them

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  ___________________________________________________________

  This program allows to search for malicious programs:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows Defender error messages: error Ox800106b5

  I'm trying to clean up my fathers PC. It is using Vista Home Premium OS and tried running Windows Defender and had the following error message error Ox800106b5, is - anyone know what it is?  Thanks in advance. Dave

  Hello

  I think you may have the incorrect error number

  are you sure this isn't: «Error 0x800106ba»

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Full Vista: occasional error message: "no answer" (when you click on a link, on or off line)...

  Vista Ultimate. At completely random times, I get a message that the page I click (online or offline) "does not. The screen turns white (translucent) and I am then presented with an error message with the options 'expected response' or 'stop' the process. I can still see the original page (in the background) where I clicked initially to go to another link.  These errors are happening more frequently now. The system effectively hangs at this point.

  Norman Solomon, Brookline, VT

  E-mail address is removed from the privacy *.

  Vista Ultimate. At completely random times, I get a message that the page I click (online or offline) "does not. The screen turns white (translucent) and I am then presented with an error message with the options 'expected response' or 'stop' the process. I can still see the original page (in the background) where I clicked initially to go to another link.  These errors are happening more frequently now. The system effectively hangs at this point.

  Norman Solomon, Brookline, VT

  Email removed for privacy

  It is not an error so it's just to tell you that, due to low memory, the program that you are using is not respoding or takes to respond when you click Open program, it gives u this menu to move forward.

  therefore:

  You can either increase your memory or pagefile or having to run fewer programs at the same time. If you are running many programs you can remedy this by minimizing your startup programs and also make sure that your system is clean.

  That's why

  scanning using the preforms

  http://www.Malwarebytes.org/

  http://www.systweak.com/AntiSpyware/

  http://www.avast.com/en-GB/free-antivirus-download

  Make sure that your system is free of any virus, Trojan, spyware and malware.

  Then, get rid of unnecessary files using ccleaner

  http://www.CCleaner.com/

  then...

• My printer HP Photosmart C310 provided false error message "paper jam".

  Line contacted HP support comrade with the focus East India, after asking the age of my printer, has reported that the pilots had "expired", saying they were only good for 1-2 years and offered to fix the problem for $37.  Access my computer, interaction has been put in place between me and yet another person and we have communicated on a tablet of sorts, all in a display cursor through the computer. After several minutes, the problem was pronounced fixed, even if initially, remained the same.  After a video and following the steps of repair (which I had already done several times) jam of the supposed paper - or the message saying that there is a--went, and the printer became indeed useful.

  Then the first fellow reminded me that I owed him $37 and proposed to replace my security system with installation of Microsoft anti-virus Norton, a PC cleaner to remove unnecessary files and errors and unlimited technical support for 1 year - for $100 + life - I declined.

  Was - this legitimate? A process of aid approved by HP?

  I was thinking the problem was somehow inserted into my printer by these people and not inclined to pay.

  My suspicion is strengthened by having at the same time received an email from a credit card company, saying that my account has been suspended after too many login attempts had been made.  I had none, and a call that revealed to them that the account had not been suspended.

  Operating system of Windows Vista 64 - bit, error message "Paper jam", no change before the error occurred.

  Unfortunately you did not deal with HP support.  If you do a search for "HP Support", you'll see paid ads that "resemble" HP support but are actually not of HP.  HP support sites will hp.com in the url.  What I heard some of these HP people today it is not uncommon for them to call you back the next day if they manage to sell you something the first time.

• Installing Win7 Enterprise by PXE and tried by disk. Get the error message at the point "Setup starts services. What is the solution?

  The message reads: "the computer restarted unexpectedly or encountered an unexpected error."  Windows Setup cannot continue.  To install Windows, click OK and restart the computer, and then restart the installation. »

  Found and answer to change the registry via the command prompt, but cannot get to the command prompt and SHIFT + F10 for the error message screen is unresponsive.  Disk install also-error to the exact place.ed even to install via disk and got the same error at the same place.  Other options available?
  Thank you.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• I received a phone call from a 'windows teammember' claiming that Windows had received error messages.

  Someone called me suddenly claiming to be with Windows. He said that Winows had received error messages from my computer on the unnecessary files downloaded on my computer, and offering to help me remove... If I give him remote control.   It's for real?  Someone else make that call?

  Many people have had these criminals call them.  I guess that you have hung up on them.

  Microsoft never call someone out of the blue and would not have the necessary information to do so, even if they wanted to.

• Error message: "logon user interface host windows stopped working. & configuration of updates fail

  Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

  For your information, I use windows 8. so help me solve this problem. TQ

  Hi ZakwanSalleh,

  Thank you for choosing Windows 8 and join us on our community.

  From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

  We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

  Method 1:

  I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

  Method 2:

  I also suggest you to run a sfcscan and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

  Follow these steps to run sfcscan.

  a. press Windows + X keys and click / tap on (Admin) command prompt.

  b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

  NOTE: It can take some time to finish the race.

  For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358#method3

  It will be useful. For other related issues in Windows area it always welcome in our community.

• Error message in 'Manage the Sites' in DW8

  Hi all, it may be a trivial question, but cause me unnecessary frustration.
  
  I have a number of sites created on my PC, in the top folder in the "my websites" page, but each in its own site. "Whenever I have change the settings in the 'Manage the Sites' installation, I get an error message ' the root folder you have chosen is inside the folder site"XYZ ". This may cause certain operations, such as the synchronization to work correctly. Still? "Even to delete the folder"XYZ"simply changes the message to another folder. If I ignore the message, everything seems to work well in all cases. (I do not use the ease of the synchronization of the site).
  
  Suggestions, please?

  Hi Murray, I think I found the problem: a couple of the sites are no longer active and I moved the old site files in Windows Explorer without update or delete in Manager of Site of DW. Now that I have deleted the relevant sites of DW, the problem seems to have disappeared. Thanks anyway for your answer.

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.