unstable display

Similar Questions

• MS Works Word Processor 9.0 unstable display

  I use the MS Works Word Processor 9.0 with Win 7.

  When the slider is moved to the end of an open document that is longer than the display area, the displayed document moves to the top line by line until the top of the document is reached. The slider, however, remains in its original position. If an arrow up/down/right/left key is hit to move the display returns to its original position and begins again to move to the top.

  This also happens with new documents when the document is longer than the size of the viewport.

  This does not happen with Notepad or Wordpad or any other form of software.

  Maybe someone has any suggestions as to what is the problem?

  Hello

  Check with the experts in these forums: (re - ask your question)

  Answers - Forum work
  http://social.answers.Microsoft.com/forums/en-us/addworks/threads

  Check your settings in the control panel - mouse (for mouse or touchpad).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Bug? Web form options unstable display settings

  Everyone knows that a form of planning data loses its number formatting? Sometimes when I open a form of data with the browser, I lose the formatting... (decimals, negative formatting, missing the cell formatting) and the I get it back is to change any of the display options, save, go out and reconnect. I don't know what is the trigger.
  
  Many users of this experience and it is a very annoying problem.
  
  Is this a bug or a setting somewhere that stabilizes at that?
  
  11.1.2.1.0.083 worm
  IE 8

  Are there any special circumstances or sequence of steps which leads to this question?
  11.1.2.1.600 is out, check the read me if you find something related to your question: (14464109 Patch: Patch Update: 11.1.2.1.600 Oracle Hyperion Planning, Fusion edition)
  https://updates.Oracle.com/Orion/services/download?type=Readme&Aru=15424420

  See you soon... !!!
  Rahul S.

• Displayed page 12 Firefox unstable

  SOUL

             Firefox
  

               Version
  

             12.0
  

               User Agent
  

             Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:12.0) Gecko/20100101 Firefox/12.0
  

               Profile Directory
  

               Enabled Plugins
  

               about:plugins
  

               Build Configuration
  

               about:buildconfig
  

               Crash Reports
  

               about:crashes
  

               Memory Use
  

               about:memoryame
  

             Firefox
  

               Version
  

             12.0
  

               User Agent
  

             Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:12.0) Gecko/20100101 Firefox/12.0
  

               Profile Directory
  

               Enabled Plugins
  

               about:plugins
  

               Build Configuration
  

               about:buildconfig
  

               Crash Reports
  

               about:crashes
  

               Memory Use
  

               about:memory
  

  Follow the suggestions mentioned in the following articles:

  • Clear the Cache and Cookies
  • Clear the Cache of the network

  -> Start Firefox-> questions Troubleshoot Firefox in Safe Mode to check if your add-ons/extensions is the source of the problems.

  • See also this article-> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working normally when using Firefox to troubleshoot Firefox in Safe Mode.

• WiFi unstable and slow Internet high speed

  Hello world:

  Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem.

  
  

  Symptom:

  Internet mainly speed just unstable using a wifi connection. (no problem with wifi connection self and my wifi suddenly grave would not be)

  Example:

  • FaceTime with my friends and the connection would suddenly abandon or images & audio gets fuzzy.
  • Videos in online streaming and suddenly occurs buffering.
  • Download file of software update iPhone via iTunes, the speed is slow, he needed to take 2 h at the end and later on a window display "cannot download and check your internet connection".
  • Suddenly cannot open websites like site apple.com, google.com. Sometimes it will take more time to open Web sites.

  Hardware and software:

  MacBook Pro mid-2009, OS X EL Capitan 10.11.5

  ISP: Cox, 50Mbps

  Modem & router: Netgear N450

  Test:

  Turn off my wifi and connect my macbook pro with modem & router with cable, internet high speed is stable and fast. Internet speed download speed test result display is of around 60Mbps, download speed is around 8Mbps. And I tried streaming using the connection cable, there was no buffering.

  I already tried the possible Solutions:

  • Restart the Macbook pro and restart Modem & router: will not work. I mean the internet will be very well at first, but later would be unstable again.
  • Reset Wireless Modem & router and change channels: useful, but not completely solve the problem. After you change the wireless channel, I tested my internet speed and the result showing 20-40Mbps (slower than 60mbps) speed download. Sometimes, the result will be like 6-8Mbps and sometimes it will be 60Mbps. If its unstable.
  • Wireless diagnosis: result indicates connection is good.
  • Called my ISP provider: they checked and said all right.

  
  

  Other Questions & details:

  • The internet is ok for most of the time. But when all of a sudden I can't open site or I can't download and streaming & FaceTime at normal speed, his frustration.
  • I thought it might be related to my hardware since its an old macbook pro. I can't run Apple hardware test because I don't have the installation disc more and my macbook pro is very old. Is it a third party software that can perform the test hardware on mac?
  • My wifi used to be very stable and I don't have to worry. Just for these last two weeks.

  
  

  
  

  I really appreciate your time and help! Looking forward to any reply!

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• bookmarks and other pop-up menus (from website links) show by intermittent/unstable

  Bookmarks menus displayed by intermittent/unstable. The same thing happens sometimes with certain links in the Web site.

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Drop-down boxes are unstable and lose text transparent tour since the last update

  Since the last update, menu drop-down boxes in Firefox have been unstable. Appear it briefly and then go transparent. Move the cursor on the transparent area will restore the text for a moment, but then it goes transparent again.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  Safe mode disables extensions in Firefox 4 and later versions, and disables hardware acceleration.
  
  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• Satellite Pro C50-A-1E4 running unstable with new RAM modules

  I have the above machine and that you have upgraded the RAM (up to 8 GB) a long while ago. Normally I have upgraded the BIOS if there is a new version.

  However, for some so that my machine was unstable, and this is due to the RAM running at the XMP1866 of the machine (933 MHz) instead of the rated CPU 1600 (800 MHz). I have attached a screengrab of Piriform Speccy to report.

  There is no 1.40 BIOS UEFI framework to adjust the RAM timing and so BIOS supports data SPD incorrectly for CPU ID.

  I'm unable to locate earlier BIOS to check if this pattern is repeated, but it took more than a year to display fault so that the machine is out of warranty. If I put small sticks of RAM 1600 system seems stable.

  However, I bought the RAM to use. Now I am unable to test if RAM is faulty because she will not pass Memtest (blocking or crash on) but I'm not sure if instability of the system is defective cause of system being OC because of the BIOS or RAM.

  The question that he is perfectly for about a year before displaying the errors. BIOS should correctly detect the speed of JEDEC standard data in the EEPROM. He does not. I often ran "overspec' memory in other PC without encountering this behavior. It is only troubleshooting that made me aware of this gap.

  RAM is Crucial Ballistix 8 GB-1866 BLS8G3N18AES4CEU.16FE

  If I put small sticks of RAM 1600 system seems stable.

  I doubt that it is a BIOS problem...
  First of all, you can not use any module of RAM... you must use a fully compatible modules and as you probably know, not all commercially available RAM modules are fully compatible.

  As far as I know if upgrading RAM that Toshiba recommends the use of these modules.

  4 GB DDR3 - 1600 PA5037U-1M4G
  8 GB DDR3-1600 PA5037U-1M8G

  The specifications are:
  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8GB
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Rank: Rank double
  Latency (CL) CASES: CL11
  Voltage: 1.5V

  I recommend you use the modules that meet exactly the same specifications.

• My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

  My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Poor meanless LCD display on tecra 6000

  I wiped recently a 6000 Tecra HDD used as installation of win 2000 any unstable daughter. Installed new WIN98 SE and new ŒUVRES.
  The image was strong but low (600 x 400?). I noted're assignment and went into the BIOS to set the STRETCH. Of course, this defines full-screen, but very low resolution.
  Could not get the cursor to POSTER to move beyond the setting of lower resolution, and even when I go to hardware and try to install the upper resi LCD monitor I get no change, no driver seems to be OK and always bacjk to system default to this setting of poor.

  I lose a valuable file when I wiped the disk? I did a BIOS update but doesn't change anything.

  Help you smart people!

  b

  Hello!

  You sure have a Tecra 6000?

  Don t want to say a Satellite or a Tecra 8000 Pro 6000?

  Check please a description of the model for new laptop and try to find a display driver right on the download from Toshiba site.

• Audio output is totally unstable!

  Since the upgrade to 10.2.1 I have strange problems with the release becomes unstable, with cracks and nervous and weird smashing of the signal. Use a Scarlett 18i8 as an interface. But the same thing happens when I disable and use Core Audio. Terrible! This happened after I created a pile of track for mixdown midi instruments tracks. Audio becomes unplayable.  I want to downgrade to the previous version! Does anyone else have this problem?

  Also when displaying scrolling play the cursor jitters and jumps instead to stay smooth.

  ????????

  PS Even after make 'Cancel' to create the stack the audio remains totally cute.

  OK, I found out what the problem was, well, maybe this will help someone else!

  One of the tracks has been to Surround sound, others were stereo. Was not a problem until I upgraded to, but maybe the 10.2.1 new he could not process correctly.

  Anyway, problem solved!

• Time Capsule - unstable internet connection

  Using of a new airport Time Capsule and a detail Comcast modem my internet connection is intermittent.

  

  The display above goes green and then red in no obvious pattern.

  

  I don't know what to do now. In time, I started this response network screen Diagnostics went all green again. But it won't last.

  I tried the usual reset of the modem and TC. The problem affects my ethernet connected iMac and MBP of my wife.

  Any ideas?

  Re: Time Capsule - unstable internet connection

  Vice versa...

  What model is your TC? If it is earlier than later to get the A1xxx of the base number... If it's the AC model just to say... Version of ca. No number is given which is really poor.

  What model is your comcast modem? Real brand and model base please.

  More important if the comcast is actually a router... That is to say, it has more than one ethernet port. We need to know, it is actually running in Bridge mode or a router... screenshots of TC installing airport utility is more useful than the Network Diagnostics. TBH I'm surprised you even found network Diags El CAPO as they hide it very well.

  

  Please give me all with summary... as above... nothing will reduce your security. Try it with mine... even if you have a public on the WAN port IP address, it changes every time that you restart the modem... so this process, we can easily have all the details you give... unless you know the serial number of my TC... What's that serves... None...!

  NOTE... If you have a simple modem Arris begins with SB eg SB6121 SB6141 as well as other models and version AC TC... they have well known problems... Apple has not breathed a Word... but there are a lot of posts here on the problem... and it is high time that Apple fix it... because it affects no other routers... just of airports in apple...!

• Text display problems - glyphs instead of letters

  I have a new MacBook Pro (retina, 15 inch, mid-2015) has problems of text that appears on a regular basis.

  It displays as glyph lettering more highlight in Safari, but here is an example that I found within the iTunes Store.

  

  Is there anyone who knows how to fix this?

  Thank you very much

  Alex

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• NVIDIA display error messege.

  I have a lenovo Y570 with the intel hd 3000/geforce gt 555 m. I recently downloaded Call of Duty 4 and CoD World at War on steam as well as Nvidia 310.90. These pilots are unstable for 2 games, if I try to change resolution on multiplayer, the game crashes. I tried to install the drivers of xx, 290 but the installation failed.

  I searched online, and many forums had people saying to remove the nvidia drivers using driver sweeper. I downloaded Sweeper driver, clicked on drivers Nvidia, uninstalled and restarted. When I rebooted, I realized that driversweeper has also removed the essential files for my nvidia chipset. The nvidia icon in the lower right corner, but when I click it, I received a message that says:

  "Currently you do not use a screen attached to a nvidia driver.

  I tried going to Lenovo support and download the Chipset and Intel display drivers. I also tried to download graphics drivers and Nvidia optimus. Nothing works.

  Is there a driver I can download to fix this problem, or I have to send my Lenovo laptop for repairs?

  Fixed it with system restore.

• IMAQdx with 10, 12, 14-bit and the display Conversion

  Hello

  I ran into a problem when you use a 12-bit with IMAQdx firewire camera.

  When you take a 12-bit image in an IMAQ I16 display Conversion method not working anymore. Vision sometimes gets unstable one can freeze my LabView. (Labview8.6, Dev.8.6.4 of Vision).

  In the attached screenshot, you can see for example that it is bringing dynamic scaling of 90%.

  Maybe is a problem with the camera data format? Or 12 bit images are fixed scaled?

  I have a fix using 16-bit only a little changing.

  Chris

  Hi, zabotage,

  His "documented bug" that has been discussed here somwhere.

  Thus, mapping works with 16-bit images only! Its documented. Even you have 16-bit type, but bit depth that lies inside IMAQdx is not 16-bit.

  Also use the depth of Bit Image IMAQ with 16 bits before function mapping (or with the depth of bit = 0, I do not remember) and everything will be OK.

  Andrey.