Similar Questions

• Update Firmware on Dell PowerConnect 3548p

  Hi all

  I have dell Powerconnect 3548p and I want to update via telnet and I was wondering what the commands are as I tried those on the CLI manual.

  I made a connection with success of my tftp to the switch and vice versa.

  I am aware that this is possible through the web management, but I would like to know how to do this via PuTTY.

  Thank you

  You can update the firmware and boot code by using the command copy. Here are the commands that will be carried out.

  Update the boot Code and firmware

  Console # copy tftp: / // image

  See the boot to console #.

  Start console system #.

  Console # copy tftp: / // boot

  Thank you

• Update Firmware in Dell Equal Logic PS4100E

  Hello! I have a Bay Dell equal logic PS 4100E. I need to update its firmware. Currently Im running Firmware V5.1.1. I read this: "Update Firmware for Dell EqualLogic PS Series arrays and FS Series storage facilities" but I need confirmation before doing the actual upgrade.

  Since Im running V5.1.1 now, I need to:

  (1) download and install the firmware V5.2.11

  (2) download and install the firmware V6.0.8

  (3) download and install the firmware V7.0.2

  Am I wrong? Could someone confirm that its okay? Soon ;)

  To get to v7.x v5.1.1 you only need to do two updates, first upgrade to 6.0.x (the most recent, 6.0.8).  The document upgrade firmware for v6.0.8 clearly shows that you can go to 6.0.x 5.1.x and no need to do the 5.2.11 upgrade).

  Once on the last version 6.0.8 (and the table has been restarted - very important to do this step!), you can go to the latest version of 7.x.

  (Note that the release notes for 7.x is a bit of confusion on this and need to be revised to show the path of 5.1 to 7 a little better)

  -joe

• Need to update firmware PowerConnect 7024

  Hi all

  We are in need of a major update on our 7024 PowerConnect switch. It is running version 4.0.0.6 image, which I'm sure is super old account because I no longer display it in the list of versions of firmware. My question is this - if upgrade US 4.0.0.6 to the latest firmware of the 5.1.6.3, A19, we will have problems with the current configuration, given that we take it a great leap forward? Or would it be better to just update in increments from the firmware available earlier? Any help is greatly appreciated!

  4.x.x.x firmware is older, but you should have no problem go directly to the new firmware. I'll make sure that you have a backup of the running configuration, and then follow the update instructions included with the firmware download. Here is the link to the firmware, just in case you need it.

  http://Dell.to/1pMOx6R

  See you soon

• Update Firmware on Powerconnect 6224 switch

  I am wanting to update the firmware on my Powerconnect 6224 3.3.1.10 Version 3.3.5.5 Version switch.  Is there a problem with this jump or if that's okay?

  I would like also some words of wisdom as how this upgrade as painless as possible.

  Sincerely,

  Ken

  You should not have problems from this version to the current 3.3.5.5.  If you are not familiar with the command line on the switch, you can download the firmware from a location on your workstation management through http.

  You start by downloading the 3.3.5.5 from the support.dell.com site. Keep in a folder.  Then from the interface WebGUI of the switch, you can go to System/file/management folder download you must choose HTTP to transfer mode, then navigate to the location of the firmware on the desktop you.  Here is a screenshot of the file download page.

  

• Difference between Dell Powerconnect N4032F and 8132F

  Hello!

  In the last days, the Dell PowerConnect 8100 disappeared from the Dell Web site and now, the M4000 series with the same characteristics are presented.

  It's just a change of name or these devices differ in some way? The M4000 firmwares is usable on 8100 switches in the future?

  Thank you

  Kind regards

  Stril

  Dell PowerConnect N4000 switches series both Dell Networking PC8100 series share the same version of the firmware of the image (for example, N4000v6.1.0.1.stk). The Dell Networking N4000 series switches can be stacked with switches Dell Networking PC8100 of the series with any battery necessary for the performance of 6.0.0.8 or later firmware (6.1.0.1). Dell Networking PC8100 switches can support the firmware both 5.x and 6.x versions, but Dell Networking N4000 can support only the 6.0.0.8 and later versions of firmware (6.1.0.1)

  I hope this helps.

  B

• Dell PowerConnect 7048 P reference stack Questions

  Hello

  I have two switches in L3 7048P I want the battery but I'm not sure how it works. The two switches have the same firmware.

  1 must. the two have the same configuration running on both to make it work?

  2. in addition, I created a VLAN (3) voice on the first switch with an IP address of 10.0.3.254. I use the same IP address on the second switch in the VLAN 3 addresses or assign another?

  Thank you!

  There is a guide especially for stacking switch 7048 on the Dell page networking white papers:

  en.Community.Dell.com/.../2580.Networking-guides.aspx

  Just search "Dell PowerConnect 7000 Series Switches stacking".  Page 16 will tell you how to add a new Member to the battery with minimum interruptions. Both can present the same firmware in order to stack.  So the answer to question 1 is no, the configurations do not need correspond to stack them.  Once stacked, both will look like a single switch, and you use only the IP address of the master swtich to the whole stack.  Therefore, treat the two switches as a single switch during Setup.  The guide provides more information on how it works.

  Hope this has been helpful.

  -Victor

• Stacking Module - Dell Powerconnect 6248

  Hello. I have a Dell Powerconnect 6248. This used to be a secondary switch in a stacked configuration (total of 2 switches). However, the captain then descended down we unplugged and it became the master of the battery. It is always configured in a configuration of the battery.

  My question is this: can I remove the stacking module card when the switch is on and in production?

  The reason is that I bought a new 6248 and repaired the old master as well and want to stack these two because they are both on the latest firmware. What is the best practice for this that I don't want to take down the switch by disconnecting the battery module.

  Let me know if you need more information!

  Thank you very much for any information!

  Unfortunately the stackable modules are not hot-swappable. You must turn off the appliance to remove the stacking module.

• Latest firmware for Dell & KM714 universal receiver

  Hello, can someone tell me what are the latest versions of the firmware for Dell universal receiver and (as applicable) KM714 wireless keyboard & mouse?

  Drivers download pages are a mess and it's hard to find an appropriate update file or the game with the system (e.g. KM714 pilots are officially not available for Win10).

  Here's my current status of FW:

  

  Here is the link to July 2016 Driver Update: http://dell.to/2eQMR8n

  and for KM714 & WM514 Dell Update universal receiver:

  http://Dell.to/2eQNSxe

• Dead circuit 2 on Dell Powerconnect 5448

  13. 24 (circuit 2) ports on my Dell Powerconnect 5448 died without lamps regardless of the connection. Is it possible to have the unit repaired or replaced circuit?

  Thank you

  SE C.

  The switch has no easily replaceable parts on it. In this Youtube video, you get a glimpse of the inside of the switch and see that everything is everything on a single card.

  http://bit.LY/1QeQ4O4

  It sounds like a hardware problem, but you can try to reflash the firmware on the switch.

  http://Dell.to/1p46zT1

  If the switch will exhibit this behavior, then it should be replaced.

• Reference Dell PowerConnect 2848 OID for CPU time and memory

  Hi all

  This is my first post in this forum. I searched all the messages that can solve my problems, but I could not find so if there is already an existing post and I couldn't find it please guide me to it.

  My case is. We have a few Dell PowerConnect 28xx switches in our network. We want to monitor things like the CPU, the temperature, the use of the RAM usage. We use Solarwinds IpMonitor monitoring tool. I downloaded the MIB, I could find the download of Firmware from Dell drivers and downloads page. I went through the entire MIB, but I couldn't find an OID for the foregoing.

  So if anyone can help me please what OID is used for usage of CPU and RAM temperature it will really help me.

  Please let us know in case we need more information on my side.

  Thank you

  Frank Moreau

  I did use SNMP on the 28xx but here are some various sensor OID, I used for the N-series, as well as some older models Powerconnect.  I don't know if they will work for the 2xxx, but you can try one or two and see if they work.

  N - Series (FW 6.2 and later versions) temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.0
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.1

  62xx (3.0.x.x firmware or later-, some may also work with 2.x firmware)
  Temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.4

  Are the OID to use CPU for N-Series switches
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 (total free memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 (total memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 (table for the following...)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1 (index)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (name of the process using CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (% CPU used by the corresponding process)
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 (cumulation of all the activity of the CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 (CPU utilization shows 5 s, 60 s and 300s).

  OIDs memory
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2
  Power supply OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.3
  OIDs of fan
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.4
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.5

  35xx (2.0.x.x or later firmware)
  Temperature OID
  . 1.3.6.1.4.1.89.53.15.1.9
  . 1.3.6.1.4.1.89.53.15.1.10
  OIDs of CPU
  . 1.3.6.1.4.1.89.1.6
  . 1.3.6.1.4.1.89.1.7
  . 1.3.6.1.4.1.89.1.8
  . 1.3.6.1.4.1.89.1.9
  OIDs memory
  . 1.3.6.1.4.1.89.29.11.1
  . 1.3.6.1.4.1.89.29.11.2
  P.S. The OID
  . 1.3.6.1.4.1.89.35.5.1.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.3
  . 1.3.6.1.4.1.89.83.1.2.1.4
  . 1.3.6.1.4.1.89.53.15.1.3
  . 1.3.6.1.4.1.89.53.15.1.3
  OIDs of fan
  . 1.3.6.1.4.1.89.83.1.1.1.2
  . 1.3.6.1.4.1.89.83.1.1.1.3
  . 1.3.6.1.4.1.89.53.15.1.4
  . 1.3.6.1.4.1.89.53.15.1.5
  . 1.3.6.1.4.1.89.53.15.1.6
  . 1.3.6.1.4.1.89.53.15.1.7
  . 1.3.6.1.4.1.89.53.15.1.8

  for old firmware - if the 35xx above does not work:
  Temperature
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.9 (Celsius)
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.10

  I hope this helps.

  B

• Reference Dell PowerConnect 3524 - "SW3P_callback_rx_frame - arp - scrapped intervention."

  Hello everyone.

  The company I work for, I test switches to see who is good and who is bad. I've already marked the switch in question as 'bad' for these mistakes - but I've never seen this error before. My colleagues have not either. Therefore, I ask the community what kind of error is what it means and whether it is potentially fixable.

  My device is a Dell PowerConnect 3524. He is currently out of warranty.

  What I did: I have deleted the startup configuration and then run the Setup Wizard. I put an IP address, gateway, and password. The rest, I left the default values. This configuration works on all switches that I have ever tested, including this model, so I think that this configuration is not serious.

  Then I plug in an ethernet cable in all ports and the other end into a very small 5 port switch that also has other trendy items above, the phone and my main computer. They all get internet, I don't think that there is a problem.

  I plug another cable in another port of the switch and the other end in a laptop sitting on top of the switch (my laptop test).

  I start ping the local firewall and run it with the "-t" parameter so it does not stop.

  It is fine for about 5-10 minutes usually. I can trade ports and others and she'll pick up ping soon and do what it is supposed to. After plugging into the wrong port, (7 or 8), I get the error "SW3P_callback_rx_frame - intervention arp - put the scrapped." and cannot pass traffic. PuTTY shows that the connection is established and transfer, but the ping is not possible.

  I am only an intern, this switch is not vital and will be sent to the "cemetery" and all my business done with switches will be. I am just curious to know what it is. Anyone know what it is and what could be done to solve the problem?

  Thank you for your time!

  I couldn't find any relevant information on this error message. With errors that occur only on specific ports and a new configuration, it really sounds as a kind of material error. Will there be another message that accompany this message? If you haven't already done so, re-flashing the firmware of the switch can help ensure that the message is not caused by an image that has become corrupt.

  http://Dell.to/1XmQxPU

• Reference Dell PowerConnect 6024F get mac by ip with arp and more option

  Hello in the DELL community.

  I hava a little question, and hoping to find some answers here ;) I'm writing a small script, and in this script, I need to get the mac address is to link to Ip address of the ARP command. I am using telnet to connect to DELL. But the show arp command displays a lot of information, a huge list of ip. I tried to analyze, with the '' option and press etc., but it's a very slow procedure.

  Two main issues:

  1. how to get the mac address and link it to the IP by ARP command

  2 how to get rid of the option ''. I mean show cli without

  I thank the of to get answers.

  P. S.

  ===========================

  Switch: Dell PowerConnect 6024F

  # See the worm
  SW version 2.0.0.19 (date may 5, 2008 time 16:33:30)
  Start the version 1.0.0.13 (August 13, 2003 time 15:28:31)
  HW version 00.01.64
  #

  Show arp? -> watch only

  Show arp
  

  Terminal Server? -> watch only

  Terminal Server
  history

  He might have an OID you can pole for this info. all the OIDS are in the MIB that are included in the download for the firmware.

  www.dell.com/.../DriversDetails

  If you do not find one in the MIB, you might try a SNMP walk on the switch to see if you can identify an OID that will provide you with this info.

• How to change the time that stacks convergence on Dell PowerConnect 8164

  I have create a pile between two switches Dell PowerConnect 8164.
  But I want to know if I could change the time it takes for converges converges moment between them, I want to say... I have remove all the stacking cables (so no connection between no switches) and connect them then... something between 3-5 minutes for the complete convergence.
  Is there a customization here?
  Kind regards!

  There is no option of customization on the re-convergence of a battery.  It is basically kicking a restart of the operating system on the box.

• Unable to update firmware for the PERC 5 controller / i on PE1950

  We have 6 PE1950 server with SAS PERC 5 / i integrated RAID controllers. Dell OpenManage complains about being obsolete PERC firmware. 2 servers I currently have running, firmware 5.2.1 - 0062 and 5.1.1 - 0040. I downloaded the latest version of 5.2.2 - 0072. I tried the update by the Windows package and who did not, and he complain about the OS being too recent. A server is Windows Server 2008 R2 and the other Windows Server R2 2012. So, I created a BACK USB key with Dell hard drive files and run update.bat. Who failed on both servers with the following errors:

  Firmware doesn't have flash. Stop!

  Failed to update Firmware for controller 0

  The process of updating of the firmware of the controller does not have!

  Both servers had the exact same mistakes as described above. Ideas on how I can get the firmware update successfully? I checked the package I downloaded is for the PERC 5 / I integrated.

  It's here (if that will allow me to post a link):

  www.dell.com/.../DriversDetails

  Hello

  Try this updated version and see if it works. He said that it was for the 1950s.