Similar Questions

• Problem updating firmware TS-L632H on Satellite P200D

  Help, please.

  Having problems burning CDs / DVDs. thought the TO01 to TO02 firmware update would solve the problem, but then the TO02 driver could not be installed.

  I tried installing the driver but the software indicates the latest version of the software is already installed.

  Driver date: 21/06/2006
  Driver version: 6.0.6001.18000

  Hello

  I checked the driver Toshiba section info page more (he s right) and are found some details about this firmware update.
  Changes have been made to correct the following:
  Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed

  If the update of the firmware doesn't solve all problems with burning CD/DVDs!

  I assume you have some CD and DVD burning issues because the media are not entirely compatible.
  What you could do is to check various CDs/DVDs from different manufacturers.

  A single note; If I m not wrong not the user manual should provide some details on CD and DVD compatible and supported.

• L26500 61i: PROBLEM UPDATE FIRMWARE L26500 61i

  I can't update firmware. My latest firmware is 11.0.0.2 and when I try to upgrade to 12.00.00.5 I get this message

  SP - SP_12_00_00.5_mvl40 - x 86 - opt_B.signed.fmw: there are problems with the firmware file and the firmware update process has failed. The file you have selected may not be good, or the problem may be due to a transmission error. Please, start the firmware update process again. If the problem persists, please contact support.

  I tried to download it again, but it's the same thing...

  I have checked the connections on the back of the printer and found a LAN connection, I confused with the 360 LaTeX, sorry my mistake
  Another task to do, run the diagnostic menu of emergency update firmware.
  If issue still continue, run the hard drive recovery in the same menu

• Problem updating firmware on LaserJet 4100

  Hi all

  Looks like I can put my subject in the wrong forum. I have no doubt I should have put my question here in the forum of firms. If someone could take a look at my problem and update (here or here, I subscribe to two topics), I'd be happy.

  https://h30434.www3.HP.com/T5/printing-issues-troubleshooting/LaserJet-4100-firmware-unable-to-updat...

  If an admin can move my post on this forum (or anywhere where it belongs) so that the right people see I understand that too!

  Sorry, new to these forums and forums of discovery of the 'user' before I found the forums 'enterprise '.

  Thank you

  -Derek

  Hello Derek Cunningham, I am an engineer of the HP technical support. I am taking the floor for me and not for HP, but I believe that I can help you.

  Well, it took some searching.  The latest version of firmware that I could find was little out August 2, 2003 (version 1.040.2) part No. C4168-67907 listed as "HILL of DIMM KIT - ROCK".   That said, as of March 31, 2009, the product is no longer a support and spare parts may no longer be available.  I gathered this information by your request directly - however, don't believe not that the firmware update will solve the problem of 'page spew' reported.  I went through the list of firmware for different DIMM firmware versions fix and see nothing corresponding to your symptomatic behavior.

  If your workflow printing is to point and print (customers who print via a print server) Please ensure that the server and clients pilots match.  You can always remove the printer connection client and restore to ensure that binary correspondents sells.  Driver version is important, because the old specific drivers are not supported or even stable with current operating systems.  I suggest you switch for the driver of Microsoft OS Inbox for testing.

  Suggestions were made to try to PCL 5 or PS, I think that the essential thing here is to make sure you are using the latest driver for your product and the OS.

• Problem updating Firmware emulex card (FCoE) thought a single Manager command

  vCenter 4.1

  ESX 4.1 update 2
  

  OneCommand Manager 5.2.12.2 - 1 < < install on ESX using esxupdate

  CIM provider < < install on ESX with rpm

  OneCommand Manager for VMware vCenter 1.1.0 < < install on Virtual Center
  
  I want to update Firmware to troubleshoot vMotion between esx host
  

  Firmware OCe10102 and Startup Code
  Notes: You need to update the firmware and boot code on the OCe10102 UCNA when you install the driver.

  http://www.Emulex.com/downloads/Emulex/firmware-and-boot-code/oce10102-UCNA-firmware-and-bootcode/firmware-and-boot-code.html
  

  any idea?

  Error message

  
  

  
  

  
  

  Hello ianeme,

  I was watching the forums and came across your question. Ask yourself if you have solved your problem of port when you use plugin manager of OneCommand to vCenter Server? I have seen that HP has two downloads for the fw updates. For now, the last FW update to CN1000E is 4.0.493.0 March 12, 2012. Call the Emulex support if you experience problems when you try to update the fw with the Emulex OneCommand Manager application or the plug-in. But just make sure you are tested and approved HP FW by downloading the files from their site.

  Thank you

  Alex

  http://www.Emulex.com/the-implementers-lab.html

• Update firmware on Satellite A200-1gh - noise emissions under Linux

  Hello

  I have a serious problem with the sound on Toshiba laptop. Many people have the same problem I have.
  An example:

  ________________________________________
  Hi there everyone
  straight to the point, I got no sound running ' bt3 beta computer laptop - Toshiba satellite a200 - 14 d, HD audio - Realtek ALC862 @ Intel 82801GBM ICH7-M - audio. I tried to fix it with a blender Kmix or alsa, even downloaded the Realtek driver name and installed, but bt3 built in Realtek driver. Still nothing"
  ________________________________________

  My laptop contains this sound card: 00:1 b. 0 Audio device: Intel Corporation 82801 G (ICH7 Family) High Definition Audio Controller (rev 02) @ Realtek ALC861-VD. There is a problem somewhere in the firmware of this map or the Linux kernel.

  We use Backtrack 3 who is Slax based Linux distro.
  I've been with many professional talking about Linux, Bud, no one is really sure what is the problem. They said several things to try; one of them is updated firmware. I've never done this before, I'm looking for help.

  Number of exact model of my laptop is Toshiba a200-1GH psaece

  Please help if you can

  > There is a problem somewhere in the firmware of this map or the Linux kernel
  What are you talking about boyfriend? This firmware of the sound card that you hear?
  I think you're confused.

  First of all there is NO firmware for the sound card. Second, the sound card is controlled by sound driver.
  Always is it that Toshiba laptops are preinstalled with Windows OS.
  Linux is not supported at this time, and you won't find driver for sound card for Linux.

  If you need a sound driver for this sound chip, you will need to download it from Realtek Web site!

  That s all about your firmware to his mysterious map.

• Satellite Pro A300 PSAG9E - unable to update firmware

  It has come to my attention that my laptop will not install updates of the firmware.
  I tried all updates firmware on the Web from Toshiba site and on-site support for other countries but still no luck.

  My laptop is a series of Satellite Pro A300 PSAG9E and when I try and install a firmware update a box telling me it's not compatible with my system.
  I checked the version proposed by the pdf file and I know that it is the basic version before the update, and I'm sure I have install the correct way of m.
  So I don't know what goes wrong.

  Does anyone else have this problem or knows something that could solve this problem? Because I'm at a total loss.

  Thank you

  Hello

  The European driver Toshiba page provides three firmware updates;

  _UPDATE for drive_ TS-L632
  + Changes have been made in order to correct the following: +.
  + Impossible to burn songs on iTunes to some CD media. iTunes error "the attempt to burn a disc fialied. An unknown error occurred (2131)"is displayed. +

  _UPDATE for drive TS-L632P TO02_
  + This firmware solves some problems in the optical disc drive. +

  _UPDATE for TS-L632H drive TO03_
  + This firmware solves some problems in the optical disc drive. +

  You have a TS-L632P and TS-L632H drive?
  Isn't it? Then you cannot update the firmware.

• Satellite M40-101 cannot update firmware

  I tried to update firmware for my dvd - rw on M40-101 laptop drive, but when I start the program it says only "the target disk is not connected". What to do with it? the problem is perhaps cause firmware for dvd - RW drive Matsu * a UJ-831, but the model is actually UJ - 830B?

  Post edited by: ruselok

  Hello Ruselok

  Where did you find this update of the firmware? This firmware update is given by Toshiba?

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• C4599 Printer PC unable to find updated Firmware

  Hi all, I'm trying to update the firmware on my PC Windows XP (HP laptop). The software is downlaoded OK but when I run it does not find the printer. The printer is connected to my local network (infrastructure mode) via WiFi and prints OK from various computers laptops (Win XP, Win Vista and Win 7) in the House. It prints via WiFi or via the USB port but it can not be found with or without the USB connected to the PC (laptop) Windows by software update Firmware.

  Help, please!

  Thank you

  gedi42

  You suffer from one of the problems regarding the update of the firmware?

  I've actually found updates of the firmware available for your printer, only critical updates.

  Here is the update that I found:

  Update critical to prevent a State does not respond and prevent the State from error when connecting to a network.

  This is were you referencing?

• Trying to update firmware

  Have linksys BEFW11S4 v-2

  Reference Dell 1525, Vista, w / wireless 1395 adapter

  I'm trying to update my firmware in the hope that I'll be able to get online wireless.   On the linksys configuration page, I type you want in the HELP TAB, then update the firmware box.  Problem is the firmware box does not exsist.  Can anyone advise as to why it does not show and how to make it happen?

  My main problem is that new Dell 1525 get online wireless and don't ever even if the computer says I am connected to the Linksys.  The work of 1525 very well wired and wireless to other places.

  My old computer, Windows 2000 w / D Link card works fine.

  Thanks for any help.

  Dennis

  Beaver, thanks for the reply.  I have not yet tried your advice but I got my wireless works that's why I tried to update the firmware.

  Through this forum and others, I learned a lot.  Turns out all I had to do was the transition from channel 6 to channel 11.

  Thanks again

  Dennis

• Update firmware H730 on ESXi

  We have two R530 running ESXi 5.5. They run slightly updated firmware on controllers RAID minis H730 I would like to update.

  The problem is the firmware update files I can find are if you are on Windows or Linux. How do I the R530 firmware update if I run ESXi? I am aware of the image of Dell SUU, but it's more than 10 GB is size, which is much too big, even for a DVD double layer.

  Dell do not seem to offer a "hard drive" version of the firmware from what I see.

  tonybarrett in your case, you can start in the LCC (Life Cycle controller) to perform updates to the server.

  1.demarrez Lifecycle Controller: press within 10 seconds after the Dell logo appears.
  2Click on Firmware update and update Firmware of the launch.
  The select the update repository page appears.
  3Select FTP server as source location and then click Next.
  The enter access details page.
  4 in the address box, type the host or IP address of the FTP server name, and then click Next.
  Server FTP from Dell (ftp.dell.com)
  5The latest firmware is downloaded from Dell's FTP server, internal FTP server or FTP server of the service provider.
  The select updates page appears. For a component, compare the currently installed firmware version and the latest version in the current and available column.
  6Choisir the required components.
  7Click applies.
  Once the update process is complete, the system restarts.

• Update firmware is defective

  On the ePrint centre, there is a red exclamation mark next to my color Laserjet Pro CP1525nw printer, indicating that he needs a firmware update. But when I try to install the firmware software, a message indicates that there is no updated firmware for this printer. A fix is required on the end of HP.

  If your ePrint works, then you don't need an update of the firmware. The problem is that it will show this red exclamation on the ePrint center site all laser printers to spray even if she didn't need an update of the firmware. When you have clicked on the link to the HP site and it would not allow you to update it's because you have the version more up-to-date. Sorry for the inconvience of the exclamation point still be there. You were all right. You can ignore that.

• Update firmware HP Proliant

  Hi guys,.

  I thought I would ask before running into trouble: I have a couple of Proliant DL 360 G4p that send alerts on our server SIM; before going to replace parts, I upgrade the firmware because it may stop alerts with newer versions.

  Is this correct use the Firmware CD to update firmware on an ESX Server? Version 8.30 has-been recently released: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 15351 & prodSeriesId = 452749 & prodNameId = 3288142 & swEnvOID = 1005 & swLang = 8 & mode = 2 & taskId = 135 & swItem = MTX-5386628436a5426199be834777

  Hello

  You can certainly use the CD Firmware update the firmware. -J' did several times and seen it "fix" reported problems in SIM as well.

  Can cross-check the i/o Compatibility Guide with the version contained in the 8.30 firmware, just to ensure that you do not get there issues.

  Good luck!