Update my SPI allow traffic 5520 interruption?

Similar Questions

• Windows Update won't allow me to interrupt downloads

  Instead, he cancels the download, and it's not smart.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What downloads? What version of Windows? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Equium A60-692: update Bios to allow more memory

  Hello.

  I just received the laptop above, and it is slower than the evolution!

  Just checked the specs here - http://uk.computers.toshiba-europe.c...8&DISC_MODEL=1 and it says it is not expandable up to 1280 mb

  Someone told me that an update of the bios might allow for more memory, is it possible on this model and how would I go about this?

  Thanks in advance

  > Someone told me that an update of the bios might allow for more memory, is it possible on this model and how would I go about this?

  Someone is wrong, there is hardware limitation and the Bios Update will not allow you to expand the memory

  See you soon

• Update is not allowed to download due to the regulations?

  Windows 7 Edition using Home Premium.  For several weeks I can't download files, even from Microsoft.  They appear to download successfully, but I can't run or save them, nor can I find them in the downloads, Desktop, anywhere.

  Looking at the Windows Update log, I find several times: "update is not allowed to download due to regulations."  Is it an idea of why NO file is allowed to upload?  What should I do?  I've tried many 'solutions' proposed in the online forums, including this one.  Thank you.

  Assuming that you can use the "Win7 upgrade disk" to do the clean install, you MUST perform an "Advanced (custom) installation" of Win7 (which will format the HARD drive in the process, hence the need for the backup of your personal data).

  'Personal data' for me = the content of the current My Documents folder, e-mail Client (for example, Outlook;) Data from Windows Live Mail), favorites of IE. You pouvez want to backup your user account settings, as well.

  You can locate your backup on an external drive, Yes. If I had to, I would format the external drive first (since external readers who were connected to the computer may be infected, too).

  You do NOT want to restore the backup DATA until it is scanned by your application anti-virus/anti-spyware installled and (in MY opinion) at least an analysis online "on-demand" (e.g., http://www.eset.com/us/online-scanner).

  If you need additional help with the fresh install of Win7, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_7-system

  If you end up having to do a clean install of Vista, post in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  Good luck!

• rv220 allow traffic on a port magnified

  Hello

  This should be a simple.  I am in my rv220, and the title of port forwarding, I created a rule.  I also created a personalized service for the particular port I want to allow traffic.  The problem is I want traffic to go to any computer on the local network.  What ip address I put as a destination.  I tried to put on a show, but it did not.  192.168.1.255. what I just put in the IP of the router LAN and it will do the rest?

  Please notify.

  Tony

  Hi Tony,.

  Packets transmitted by the WAN port are unicast. Broadcast packets are filtered and not allowed to the local network by default. No option in RV220 to rewrite a unicast packet to disseminate.

  There is only IGMP multicast support on this router, but I guess you do not speak on this subject.

  Normally with only firewall rule, you can allow traffic for a specific service to enter, WAN, LAN, but more NAT will be a problem.

  You can share the service you're trying to broadcast in the local network?

  Kind regards

  Bismuth

• A PIX-to-PIX VPN can allow traffic in only one direction?

  Here is the configuration of the PIX 501 that accepts incoming VPN tunnels of the other PIX dynamic-ip.  Everything works very well, allowing traffic to flow both ways after that the tunnel rises.  But then I somehow limit or prevent the traffic that originates on the PIX (192.168.27.2) to go to other networks of PIX?  In other words, if a tunnel exists (192.168.3.0 to 192.168.27.0), I only want to allow network traffic to access the network 27.0 3.0, and I want to anyone on the network 27.0 access network 3.0.

  Thanks for any comments.

  pixfirewall # sh conf
  : Saved
  : Written by enable_15 at 13:29:50.396 UTC Saturday, July 3, 2010
  6.3 (4) version PIX
  interface ethernet0 car
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  activate the encrypted password
  encrypted passwd
  pixfirewall hostname
  .com domain name
  fixup protocol dns-maximum length 4096
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol they 389
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  names of
  access-list 101 permit ip 192.168.27.0 255.255.255.0 10.10.10.0 255.255.255.0
  access-list 102 permit ip 192.168.27.0 255.255.255.0 10.10.0.0 255.255.0.0
  access-list 102 permit ip 192.168.27.0 255.255.255.0 192.168.3.0 255.255.255.0
  access-list 102 permit ip 192.168.27.0 255.255.255.0 192.168.7.0 255.255.255.0
  pager lines 24
  ICMP deny everything outside
  Outside 1500 MTU
  Within 1500 MTU
  IP address outside xxx.xxx.xxx.248 255.255.255.255
  IP address inside 192.168.27.2 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  IP local pool ippool 10.10.10.1 - 10.10.10.254
  PDM logging 100 information
  history of PDM activate
  ARP timeout 14400
  NAT (inside) - 0 102 access list
  Route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.1 1
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + 3 max-failed-attempts
  AAA-server GANYMEDE + deadtime 10
  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS 3 max-failed-attempts
  AAA-RADIUS deadtime 10 Server
  AAA-server local LOCAL Protocol
  No snmp server location
  No snmp Server contact
  SNMP-Server Community public
  No trap to activate snmp Server
  enable floodguard
  Permitted connection ipsec sysopt
  Crypto ipsec transform-set esp - esp-md5-hmac gvnset
  Crypto-map dynamic dynmap 10 transform-set gvnset
  gvnmap 10 card crypto ipsec-isakmp dynamic dynmap
  gvnmap interface card crypto outside
  ISAKMP allows outside
  ISAKMP key * address 0.0.0.0 netmask 0.0.0.0
  ISAKMP identity address
  ISAKMP keepalive 60
  ISAKMP nat-traversal 20
  part of pre authentication ISAKMP policy 9
  encryption of ISAKMP policy 9
  ISAKMP policy 9 md5 hash
  9 2 ISAKMP policy group
  ISAKMP policy 9 life 86400
  vpngroup address ippool pool gvnclient
  vpngroup dns 192.168.27.1 Server gvnclient
  vpngroup gvnclient wins server - 192.168.27.1
  vpngroup gvnclient by default-domain '.com'
  vpngroup split tunnel 101 gvnclient
  vpngroup idle 1800 gvnclient-time
  vpngroup password gvnclient *.
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 30
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 30
  management-access inside
  Console timeout 0
  Terminal width 80
  Cryptochecksum:
  pixfirewall #.

  Of course, without a doubt capable.

  You can configure the inside interface access list to deny traffic from 192.168.27.0/24 to 192.168.3.0/24, and then allow anything else.

  Example:

  access list for the Interior-acl deny ip 192.168.27.0 255.255.255.0 192.168.3.0 255.255.255.0

  the Interior-acl ip access list allow a whole

  group-access Interior-acl in the interface inside

  Hope that helps.

• This allows traffic between two interfaces ethernet on a PIX

  I have a PIX with interface inside, IP 10.198.16.1. It also has an interface called WTS, IP 10.12.60.1. I'm having difficulty to allow traffic from the 10.198.16.0 network to cross the PIX in 10.12.60.0. I'm trying specifically to allow access to a server with an IP address of 10.12.60.2.

  I enclose my config. Any help would be greatly appreciated!

  OK, so the inside interface has a security level of 100, WTS has a security level of 75, so traffic from inside to WTS is considered outbound traffic, which is allowed by default. All you need is a pair of nat/global (or static) between both interfaces so that the PIX knows how NAT traffic between two interfaces (remember, the PIX do NAT).

  You have this in your config file:

  NAT (inside) 1 10.0.0.0 255.0.0.0 0 0

  who says all traffic inside, interface with the IP 10.x.x.x address will be NAT would have, but you must then a global for the interface WTS define what those IPS will be NAT would.

  Adding:

  Global (WTS) 1 interface

  will be PAT all inside resolves the IP address of the interface WTS and allow traffic to flow between the interfaces. If you prefer the hosts inside the interface to appear as their own IP address on the WTS network, then you can use a static command and NAT addresses themselves, actually doing NAT, but not actually change addresses:

  static (inside, WTS) 10.198.16.1 10.198.16.1 netmask 255.255.240.0

  Hope that helps.

• iOS: how many updates per year allowed?

  Hey people,

  Is there a limit to how much app updates that Apple allows in a year?

  The prospects for first-hand would be greatly apprectiated.

  Thank you very much

  PX

  I don't think that there is a limit to how many times you can update your app, Apple should allow each update as long as it is an improvement as new features or bug fixes etc.

• Update of SPI, CPI and TEUS through fees rather than resource assignments

  I have a requirement for the tbe SPI, CPI update and got the value performance through costs of fees rather than resource assignments. Above are not getting updates in the dashboards of Webversion of V8.1 Version. Is it possible to update the dashboard view

  I have enough details of the issue you encounter in P6 v8.1, but what about

  870208 wrote:
  I have a requirement for the tbe SPI, CPI update and got the value performance through costs of fees rather than resource assignments.

  It is extremely rare to use EVM without your activities of loading resources. but it might work if you follow these steps:

  - update of progress, in the form of your choice:
  -a relevant % of full activity (either lifeor physical, since you do not units of resource use to update % units full).
  -wbs milestones, etc.
  full performance % technique you choose wbs level that will allow to determine the earned value cost calculation method.
  the expected value and the actual cost will be in place even without resource assignments.

  NOTE: units of real expenditure do not work for updating % complete units. but, at least in theory, you could use a global change to update the physical % complete between the % of full cost, which in turn, is updated by the cost of the actual expense.

  so to sum up, this might work like this:

  Reference costs budgeted cost-> (exactly) planned value cost

  cost of the actual real spend-> Cost(just the same)

  cost of the real expense-> % full cost-> physical % complete (using global change, if this isn't activity or manually)-> % full of activity (as an alternative, you can use the milestones of wbs, 50/100, 0/100, etc.) -> % full return-> value cost won

  EV PV, AC,-> SV, CVS, ICC, SPI-> ETC. and CEC (optional)

  worth a try. Let me know how / if it works for you. Good luck

• Windows updates won't allow me to change the settings.

  Running Vista on a new Satellite from Toshiba. Updates Windows refuses to allow me to change the settings; It is set to download/update automatically, but I want to see and select updates. When I click on this box, then ok, the authorization window returns. I click 'ok', but there is nothing else that a flicker of the cursor runs. Nothing else comes up, and if I have to cancel the window updates, it is up to the automatic update. I am the only user and have always been administrator.

  It's too late to install MSE or any other antivirus application now.

  You will find information about any Recovery hidden partition manufacturer support pages.

  If you use the disks you created, you would use the OS disk first then the drivers disk.

  If you need help, start a new thread here: http://social.answers.microsoft.com/Forums/en-US/xpinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Tunnel VPN L2L with NATTing will not allow traffic which will be initiated by spoke to the hub.

  Traffic from internal hosts will NAT address works ok, but what speaks tests it traffic never connects.

  get the 10.1.12.232 NAT host would be 172.27.63.133 and past through the VPN tunnel to 10.24.4.65 without problem. However when 10.24.4.65 tries to ping or connect to 172.27.63.133 traffic does not make inside host 10.1.12.232

  ASA-1 #.
  !
  network object obj - 172.27.73.0
  172.27.73.0 subnet 255.255.255.0
  network object obj - 172.27.63.0
  172.27.63.0 subnet 255.255.255.0
  network object obj - 10.1.0.0
  10.1.0.0 subnet 255.255.0.0
  network object obj - 10.24.4.64
  subnet 10.24.4.64 255.255.255.224
  network object obj - 172.27.73.0 - 172.27.73.255
  range 172.27.73.0 172.27.73.255
  the object of the 10.0.0.0 network
  subnet 10.0.0.0 255.0.0.0
  network object obj - 24.173.237.212
  Home 24.173.237.212
  network object obj - 10.1.12.232
  Home 10.1.12.232
  network object obj - 172.27.63.133
  Home 172.27.63.133
  the DM_INLINE_NETWORK_9 object-group network
  object-network 10.0.0.0 255.255.255.0
  object-network 10.0.11.0 255.255.255.0
  object-network 10.0.100.0 255.255.255.0
  object-network 10.0.101.0 255.255.255.0
  object-network 10.0.102.0 255.255.255.0
  object-network 10.0.103.0 255.255.255.0
  the DM_INLINE_NETWORK_16 object-group network
  object-network 10.1.11.0 255.255.255.0
  object-network 10.1.12.0 255.255.255.0
  object-network 10.1.13.0 255.255.255.0
  object-network 10.1.3.0 255.255.255.0
  !
  outside_1_cryptomap list extended access permitted ip object-group DM_INLINE_NETWORK_16-group of objects DM_INLINE_NETWORK_9
  access extensive list ip 172.27.73.0 outside_8_cryptomap allow 255.255.255.0 10.24.4.64 255.255.255.224
  access extensive list ip 172.27.63.0 outside_8_cryptomap allow 255.255.255.0 10.24.4.64 255.255.255.224
  !
  list of allowed outside access extended ip 10.24.4.64 255.255.255.224 172.27.63.0 255.255.255.0
  list of allowed outside access extended ip 10.24.4.64 255.255.255.224 10.1.0.0 255.255.0.0
  list of allowed outside access extended ip 172.27.63.0 255.255.255.0 10.1.0.0 255.255.0.0
  !
  NAT (inside, all) source static obj - 172.27.73.0 obj - 172.27.73.0 destination static obj - 10.24.4.64 obj - 10.24.4.64 no-proxy-arp-search to itinerary
  NAT (inside, all) source static obj - 172.27.63.0 obj - 172.27.63.0 destination static obj - 10.24.4.64 obj - 10.24.4.64 no-proxy-arp-search to itinerary
  NAT (inside, outside) source dynamic obj - 10.66.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source dynamic obj - 10.70.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source dynamic obj - 10.96.228.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source dynamic obj - 10.96.229.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source dynamic obj - 192.168.5.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source dynamic obj - 10.75.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source dynamic obj - 10.11.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source static obj - 10.1.3.37 obj - 10.71.0.37 destination static obj - 50.84.209.140 obj - 50.84.209.140
  NAT (inside, outside) source static obj - 10.1.3.38 obj - 10.71.0.38 destination static obj - 50.84.209.140 obj - 50.84.209.140
  NAT (inside, outside) source static obj - 10.1.12.232 obj - 172.27.63.133 destination static obj - 10.24.4.64 obj - 10.24.4.64
  NAT (inside, outside) source dynamic obj - 10.1.0.0 obj - 172.27.73.0 - 172.27.73.255 destination static obj - 10.24.4.64 obj - 10.24.4.64
  !
  NAT (exterior, Interior) source static obj - 10.24.4.64 obj - 10.24.4.64 destination static obj - 172.27.63.133 obj - 10.1.12.232
  NAT (outside, outside) source static obj - 10.24.4.64 obj - 10.24.4.64 destination static obj - 172.27.63.133 obj - 10.1.12.232

  the object of the 10.0.0.0 network
  NAT (inside, outside) dynamic obj - 24.173.237.212
  !
  NAT (VendorDMZ, outside) the after-service automatic source dynamic obj - 192.168.13.0 obj - 24.173.237.212
  outside access-group in external interface
  Route outside 0.0.0.0 0.0.0.0 24.173.237.209 1
  Route inside 10.1.0.0 255.255.0.0 10.1.10.1 1
  Route inside 10.2.1.0 255.255.255.248 10.1.10.1 1
  !
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-DH2-esp-3des esp-sha-hmac
  Crypto ipsec pmtu aging infinite - the security association
  !
  card crypto GEMed 8 corresponds to the address outside_8_cryptomap
  card crypto GEMed 8 set peer 64.245.57.4
  card crypto GEMed 8 set ikev1 transform-set ESP-AES-256-SHA ESP-AES-256-MD5
  GEMed outside crypto map interface
  !
  : end
  ASA-1 #.

  Hello

  First of all, I would like to remove these two lines because they do nothing productive

  nat (outside,inside) source static obj-10.24.4.64 obj-10.24.4.64 destination static obj-172.27.63.133 obj-10.1.12.232nat (outside,outside) source static obj-10.24.4.64 obj-10.24.4.64 destination static obj-172.27.63.133 obj-10.1.12.232

  Then, I was running packet - trace to see what NAT rule actually hit you.

  packet-tracer input inside 10.1.12.232 12345 10.24.4.65 12345

• Allowing traffic SMTP on some IP address ranges

  I have to configure my 506th PIX to allow only traffic to certain IP's SMTP goes to my mail server. However, I don't know about the right way to accomplish this task. If I put in the lists of access for each beach and anything else associated with SMTP that accomplish the task?

  Any help would be great!

  Thank you

  Michael: Laro

  One thing that can help is to use "group objects. With group objects, you combine services networks and protocols (ftp, smtp, etc...). If you have a handful of IP addresses or subnets that you want to allow access to your SMTP e-mail server, you could do this is similar to the following. Remember, by default, NO traffic can come from the internet, through your external interface and in your private network. So, if you say that give permissions to following addresses, then only they and no one else. Here is an example of group objects.

  SMTP server address: 172.17.1.1

  Addresses you want to allow SMTP: 32.18.7.0/24, 204.215.18.0/24 and 113.113.45.1 and 118.55.34.20.

  pixfirewall (config) # network object-group MAIL

  pixfirewall(config-Network) network-object # 32.18.7.0 255.255.255.0

  pixfirewall(config-Network) network-object # 204.215.18.0 255.255.255.0

  pixfirewall(config-Network) # host network-object 113.113.45.1

  pixfirewall(config-Network) # host network-object 118.55.34.20

  Now create your access list:

  pixfirewall (config) #-access list ENTRY-IN permit tcp object-group MAIL host 172.17.1.1 eq smtp

  pixfirewall (config) #-access group ENTRY-IN in interface outside

  This will allow the network and the ip addresses that you defined in the netgroup called 'MAIL' access to your mail server. I hope this helps.

• View 5.2: updated-AutomaticLinkedClonePool disables allow to reuse pre-existing computeraccounts

  The Update-AutomaticLinkedClonePool cmdlet disables the option 'allow to reuse pre-existing computeraccounts ".

  How to prevent this? Is there a cmdlet / parameter to set this option?

  It's a bug in 5.2 that has since been corrected, you will need to upgrade to a later version 5.x to pick up the fix.
  Mike

• Catch 22 - Port Trunk Configurations: how to combine identifiers VLAN native with DHCP (but allows traffic of VM)

  Catch 22 - Port Network Configurations: how to combine identifiers VLAN native with DHCP (but allow the virtual computer)

  I came across a Catch 22.  Maybe someone can restore the directly here.  I found a "witch hunt" for sure.

  It comes with the Ports of junction on the side of the switch of the ESX host network.

  Context:

  Ok. The Setup is a HP Blade C7000 enclosure.  I try to configure ports for switching to the blades.  ESX 3.5 U4 will be installed the BL460cs.  Installation is preferred method: revive unattended.  No problem with the syntax of Kick-Start,

  I am here, it's the side network.

  The problem:

  I find a major complication in that the switch ports must be configured for both traffic Service Console and VMkernel, more Virtual Machine since only two NICs by blade. Not best practices, but we have only two switches Cisco 3020 inside.  The two uplink physical NIC is paired in the same vSwitch.  (No iSCSI does fortunately).

  So the Catch 22 question is as follows:

  If the id VLAN native set up on the switch port, DHCP works of course and the VMware boot loader is able to grasp a binary / packets on the network (FTP Site) and install OK.  But after no installation, no communication with SC unless I set the VLAN id of the SC to '0 '.  The value "4" 0 does not communication, but "40" is the VLAN native.

  If id configuring VLAN native retired from the Switch port, DHCP will not work and host does not have IP address during the VMware boot process.  This is as expected as traffic without label is not assigned an eligible

  VLAN, so no comms.

  The Port of the Switch configuration:

  interface GigabitEthernet0/16

  SERVERNAME description

  switchport trunk encapsulation dot1q

  switchport trunk vlan native 40

  switchport trunk allowed vlan 40-254

  switchport mode trunk

  switchport nonegotiate

  Speed 1000

  No cdp enable

  spanning tree portfast trunk

  end

  Summary

  OK, let's summarize where things are and if possible please attach responses to their digital identity.

  (1) is there a way to delete the VLAN tagging altogether side ESX host? Not only the id '0 '. The problem is with clearly with the VLAN native defined as "40".  If "40" IDs specified on the Group of ports for the Service Console, no joy, no comms. If the id of '0' value, capable of ping gateway and communicate on the network.

  (2) what is the problem with the definition of VLAN native as "40" when the config for the switch port is set as VLAN native "40"?  Or if it was a problem?  Both parameters clearly do not work together.

  (3) a switch receiving a unmarked frame it will assign to the VLAN Trunk native. Ok. Trunking bases and why I need a VLAN specified on the port for DHCP native work.  But it seems that since the id VLAN is set manually even as VLAN native, closed communications and no traffic as possible.

  (4) executives made tag 802. 1 q VLAN native?  I think that it is not and this could well be the problem. Since the id VLAN "40" is not labeled, but try to score the side host vSwitch port group.

  Please let me know your thoughts, community and how in general, we are approaching 2 NIC ESX configurations.

  When trunking multiple VLANs, you either have a default VLAN is nothing is tagged, or you don't.  That's what the vlan native to you, it defines which VLAN would be used if no tag is visible on the packets traversing the network.  For servers, if you are marking, then everything has to tag, if you're not marking at the server level, then the port must be either an access port or a VLAN native or default must be set.  I also don't keep your service console the same network as your vm.  Keep this isolated for the security of the network.  If you isolate this VLAN, you can separate and use a single IP address for installation and one for post construction.

  Or, you can provide an IP address during the build.

  -KjB

  VMware vExpert

• How to resume the update after the internet connection is interrupted?

  My App stopped QQ update because I had an internet connection problem, now it is stuck on pause.  I have to delete the app and reinstall?  Or is there another way because I don't remember the password.

  Hello Cyclops123,

  I understand you are having problems updating the QQ app and it seems to be stuck update. Let's see if we can get smooth it.

  I'd go with your suggestion to remove the app and then download it again from the Mac App Store. You can do this by opening the Launchpad, then click now on the app to make them move. Once this happens, you should see a X hovering over applications that can be removed. Click on that and it will be removed from your Mac. More details in the first articles below.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  I know you mentioned that you forgot the password for your Apple ID. The following article will go on how to reset this password.

  If you forgot your Apple ID password
  https://support.Apple.com/en-us/HT201487

  Take care