Update of different levels in cluster 3.5?
Is is OK to have different ESX 3.5 update levels on different hosts in a HA/DRS cluster? For example, we have a group that includes two ESX 3.5 servers, and we want to add a server ESX 3.5 U5. Thank you. -Glenn.
Hi Glenn,.
Welcome to the VMware communities.
Although I would prefer to have all members of the cluster is running the same ESX version there is no rule that says you must have all the ESX host running the same version. You can even have a cluster running Host ESX 3.5 and ESX 4 at the same time. For this last option, you need a vSphere vCenter Server.
Best regards, Robert
Tags: VMware
Similar Questions
-
VUM - vCenter Update/upgrade to level host w/o vMotion?
We hab a laboratory and the environment in which we would like to test vCenter Update Manager. We have Crossover installed on vCenter-VM.
A fundamental question is whether you can update/upgrade to level the host that runs the vCenter-VM and without vMotion. I would tend to say no if a patch requires the host in maintenance mode, but perhaps that staging feature a more differentiated response.
I'm curious of your answers
A fundamental question is whether you can update/upgrade to level the host that runs the vCenter-VM and vMotion
That's right, you can not switch from a host using VUM if you vCenter VM resides on that host. If you do not you can do a few things of vMotion. Take note of your vCenter VM and host running the VM vCenter datastore. Then connect directly to the host where your vCenter VM, it turns off, remove the inventory. Then open a session on a different host, browse the data store and add the vCenter VM inventory and turn on.
Once the vCenter THAT VM is powered on a different host, you can patch the other host using AUVS. Otherwise you have to patch the host as a stand-alone host.
-
Use of BPMN diagrams on different levels (11 GR 1 material Business process architect)
I have a question concerning the representation of the different levels of BPA diagrams... I have been using the suite of diagram types from highest to lowest:
-Structuring the model,
-Value-added chain diagram,
-(BPMN) business process diagram,
-(BPMN) business process diagram,
-Diagram of distribution of function (it is generated automatically).
These levels are related to the use of the function of "Assignment" on individual items and allows the user to drill-down to the last level (except between the model structure and the chain of value-added chart - I can't find allows to link the two).
As you may have noticed in the list of the diagrams above, I used two BPMN diagrams to represent two successive levels. Is it OK? The first of these two types of diagrams, I represented activities with elements of 'Function' (I also used Start, end, intermediate events and elements of the rule).
I've linked each element of the 'function' for a more detailed diagram of BPMN to the next level. We understand the "Human Stain", items "Automated activity" (and also the start, middle, end, items of rule and other events) and is intended eventually to be transformed into BPEL.
That's how I understood the "Oracle_BPA_Suite_QuickStart_Sample_Guide.pdf" and the examples included in architect 11 GR 1 material. What is the right way to do it? Does anyone have a better suggestion on how to represent the entire chain of the diagrams?
How "Assignees" can be represented in the diagram, BPMN, I used elements of the 'function '? Is it possible to bind items of "Structuring model" to the value-added chain diagrams?
I hope that this describes my dilemma quite well and don't scare you right away... Thank you all for your comments in advance.It is possible to assign structural elements to any Type of model to BPA. If you are not able to do this mission, he is not active in the filter of your method. You can connect with the filter of all of a method to verify this. You can also change the filter you use to include this capability.
The hierarchy you are using is fine and is commonly used. Some people use the model of the EPC, which is particular to BPA and not a standard, to the lower level of the value chain, but many use BPMN, as you have. If your intention is to use the first BPMN as a pure business process model then you can consider creating a separate Type of custom model, based on the BPMN model, with a small set of eligible items. This is also done through customization of the filter. If you do this, you can also rename the model types in the filter if you want to have different names at each level.
Caution, change a filter method can have impacts and should generally be done by someone with a knowledge of the meta-model. If you chosse to change a filter supplied with the tool, copy it and rename it, and then update the copy. Always keep the original filter supplied with the tool. If you are doing something so simple that the addition of the ability to use the allocation between the structural elements and models of value added chains, it would not be a big deal. If you get by reusing object and model types that has more impact on the functionality of the tool.
-
I try to use the Microsoft Office tool that implement an MSI for 64-bit Office 2010 installation file. The tool works file and creates the msi file. I get to the tool by going to the x 64-bit folder on the office 2010 installation disc.
I install a new virtual machine from Windows 7 and tried to use the MSI file to install office 2010 and I get the error:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program"
If I just click Setup on the office 2010 dvd he moved very well on the same VM window7.
Does anyone have an idea how do to understand why the windows installer keep fails or what he wants?
If I click on the msi even on a system with office 2007 is installed, I get the same error.
Thanks for the help
jbabe
Windows Update has nothing to do with the upgrade or installation of Office 2010. Please post future questions in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: cannot install WMP11, update rollup 2
I'm still on WMP 10 for a reason, and I wanted to connect my PC with 360 videos. I downloaded the update, but he told me to go get the Update Rollup 2 or something, so I tried to install it and he told me that I needed to go get the .NET framework 1.1 and .NET framework 1.1 SP1. I went to download them and install them, but he tells me that "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program".
I Googled, tried of all kinds, uninstalled SP3 and tried and nothing.
Hi xelliotx,I suggest that you follow these steps.Step 1:First of all, download and install .net Framework Cleanup Tool to remove selected versions of the .NET Framework on your computer.Step 2:Manually install the versions of Microsoft .NET Framework below:Microsoft .NET Framework Version 1.1 redistributable package
http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=enMicrosoft .NET Framework 1.1 Service Pack 1
http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=enOnce this installation is complete, try to install the other required software and check.See also:Error message when you install an update for .NET Framework 1.1 or the .NET Framework 1.0: "the upgrade patch cannot be installed by the Windows Installer service.
http://support.Microsoft.com/kb/940332
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
syslogging to 2 host with different levels of severity?
I have a PIX that sends the logs to a host with Cisco syslog installed. It is configured to send messages of level 3 (as required by the internal standards) of gravity.
I have another host which collects the theses papers too, but I want some info - level 5 or 6.
? is it possible to config the PIX to send logs on 2 different hosts with different levels of severity?
you configure the pix to send to 7 on a syslog server. configure you this server to send events to the level 3 to another server. I think that it should be possible
-
Boy, the Adobe web site is incredibly frustrating. It is very difficult to accomplish some very simple tasks. First of all, there should be an email address for contact. I shouldn't be forced to submit my question on a forum. It's cheap and lazy on the part of Adobe, especially when they charge a lot for their subscription applications.
My biggest complaint is that I can't find a simple list of the applications available with the cloud creative in different subscription levels. When I search, it sends me to a video of slick 'overview' of the creative cloud which tells me zero in on specific applications available. It should be a simple list of available with creative cloud applications and a side-by-side comparison of the applications available with the different levels of subscription creative cloud. Why can't I find something like this on the web site of Adobe? I found a page that lists 15 adobe applications, but not a page that describes to me what apps come with what levels of creative cloud subscriptions.
There are only 3 shots of cloud. Inclusions are the same for both commercial or student.
All applications
Desktop: desktop applications Adobe Creative Cloud | Adobe Creative Cloud
Mobile applications: Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud
Same info differently formatted: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools
Plan of photography: Photoshop + Lightroom
Single App plans (applications available for the unique implementation plans are in the drop-down menu on the page of the plans of cloud)
Pricing plans and creative Cloud membership | Adobe Creative Cloud
-
I have first 13.0 and updated elements at level Windows 8.1 to Windows 10. First 13.0 is not kombatibelt with Windows 10. How to do Prime 13.0 elements upgraded to first elements 13.1 so I can use it again? Tried to upgrade the usual way, but it does not help.
Try direct updates
-
In the levels layer, I have only the option of 'grey '. When I create a fill layer, I can only see different levels of grey, not the color I chose. How can I change this?
Hi elizabethu,
Greetings!
Make sure that the image is not in gray mode.
If it is to change it to RGB mode.
Image-> Mode-> RGB
And try again.
Concerning
Jitendra
-
How can I add a donation page with different levels to give for example $ 250, $150, $50, other. I'm with Foxy cart... is it possible?
Since the end of the Muse, you can add texts as the value of the donation with paypal button that would take users to the paypal for the payment site, with Foxy cart you can try the suggestion mentioned here:
https://Forum.FoxyCart.com/discussion/4417/donation-page-radio-button/P1
Thank you
Sanjit
-
Measures at different levels of concentration
I'm working on a cube. I have 6 dimensions and aggregations are supposed to do at different levels for me to get the correct results, but I'm unable to implement this. I I have a fact Table equipped with all measures, I need, including sales, quantity, amount Total savings, Total etc edits. The challenge is that these measures require complex calculations, so I have a level of data in the fact table, but I think that this is the origin of the problem. How can I build complex measures calculated in the Olap Cube using a sql statement. What are the functions I should use to do this.
The challenge is that, I've separated the totals of the details and I don't know of a way to get consistent results with 2 levels of granularity of diff
Thank youYou must come with some examples to get a better answer.
A few general points.
*(#1). * for calculated measures, look at the Expression of OLAP syntax which resembles the features of relational analytical ROLAP.
http://docs.Oracle.com/CD/E11882_01/OLAP.112/e23381/TOC.htmUse this syntax to create your measurements calculated (in minutes).
In the "Calculation Type", select "Syntax of Expression of OLAP", and in the Expression box, type the logic.
.
*(#2). * If for any reason, an Expression OLAP syntax cannot be used because of some complexity, then you can use old fashioned OLAP dml syntax.
http://docs.Oracle.com/CD/E11882_01/OLAP.112/e17122/dml_basics.htm
http://docs.Oracle.com/CD/E11882_01/OLAP.112/e17122/dml_functions_1.htm#BGEGGBAEIn the "Calculation Type", select "OLAP DML Expression" and in the OLAP DML type logic.
.
*(#3). * You can load the relational data into different levels of OLAP cube.
Facts on multiple levels of loading.
*(#4). * You can start the aggregation of the cube to a specific level in a dimension. It is very important, because the aggregation of the cube always go leaf-level and currently there is no way in AWM to set a higher standard as the starting point for the aggregation.
For example, let's say your time dimension a YEAR-> QTR-> MONTH-> DAY levels, and you want to leave aggregation of quarter level and not at the level of the DAY.You can do DBMS_CUBE. Order IMPORT_XML and provide the following syntax, so that the cube is always aggregated level quarter.
SUM WITH 'TIME' OF MEMBERS WHERE "TIME". LEVEL_NAME = "QUARTER."
.
.
Regardless of the level of complexity are your calculations, it can be done by means of (#1) ou (2).
Best is to use "syntax of Expression of OLAP.I mentioned (#3) and (4) just to make you aware of other available functions.
.
-
How can I erase different levels of opacity of a color?
I was thumbnail sketches using the Brush tool, in a single color (black) with different levels of opacity for the shading. I had milked on a single layer and on the other, but accidentally shaded shading on the line drawing and can no longer cancel/step back. I need to delete/remove shading and keep the intact black line drawing, but the PS does not seem be able to differentiate between the different levels of opacity and treats as a single colour when I try to use the erase special as Magic Eraser no matter how high I set the tolerance or selection tools, etc.. It's a simple sketch and I could draw it again, but I'm very rusty with PS and I would like to know if there is a solution in case I met this new. Prescheduled A below. Suggestions?
Part three fix
Levels adjustment layer and drag the slider of Pentecost slowly to the left. This will gradually move the nuances that darkens the white full. Move the black slider until it is in the fleshy part of the shadows (black) and adjust the slider to the Middle for the best effect. You will fix with this step. Just do a lot better.
NOTE: you must change the blend mode of layer of brightness levels.
I'd be inclined to remove all the colors of the image as well. (Hue saturation, B & W adjustment layer, but do not change gray scale)
Now select the layer levels and do a layer of copy merged top Ctrl Alt Shift (Shift Cmd Opt e) e
Now select the brush, and then change the brush in overlay blending mode (in the options bar)
Carefully paint on the black lines with black to strengthen and shading with white to remove it. Need you a bit of practice.
It took me about two minutes. Another ten and you'll have it right, (assuming that the original is a higher resolution)
-
Navigate trough different 'levels' in the XML file from the known item?
I am quite new to this, so I have to ask even if it's a stupid question...
I am trying to build a generic oracle procedure that can insert data into a table from a file XML so that message that it contains, but of course the messages has the same structure.
I need to find the first item after data, in this case "CUS_ORD_HEAD", but it could be any message as PO_HEAD.
So I need to somehow find the element without knowledge is the name of the element. It goes same for CUS_ORD_LINE that might be PO_LINE. Is it possible to navigate through the different 'levels' in the XML file from a known element.
< CustomerOrder >
< metadata >
< TransActionIdentity > 1 < / TransActionIdentity >
< / metadata >
< data >
< Client CUS_ORD_HEAD = 'ABC' CustomerOrderNumber '1234' = >
< CUS_ORD_LINE CustomerOrderNumber = "1234" OrderedQuantity = "10" ProductNumber = "1001403" CustomerOrderLinePosition = "1" / >
< HAPI_CUS_ORD_LINE CustomerOrderNumber = "1234" OrderedQuantity = "1" ProductNumber = "2530" CustomerOrderLinePosition = "2" / >
< CUS_ORD_LINE_TEXT CustomerOrderLinePosition = '2' Text = "Test" CUSTOMERORDERNUMBER = "1234" / >
< / HAPI_CUS_ORD_HEAD >
< / data >
< / CustomerOrder >the tablename parameter is identical to the XML element and attributes are the same as the columns
OK, understood.
You can retrieve the name of the element and attribute names in the same time by using something like the following.
Attribute names are stored in a collection that is accessible iteratively in order to build the dynamic parts of the query:SQL> CREATE OR REPLACE TYPE TColumnList IS TABLE OF VARCHAR2(30); 2 / Type created SQL> set serveroutput on SQL> SQL> DECLARE 2 3 xmldoc xmltype := xmltype(' 4
5 '); 18 19 --t_column_list TColumnList := TColumnList(); 20 --v_table_name VARCHAR2(30); 21 22 tmp_cols VARCHAR2(1000); 23 tmp_paths VARCHAR2(1000); 24 tmp_qry VARCHAR2(4000); 25 26 BEGIN 27 28 FOR r IN ( 29 SELECT table_name 30 , set(cast(collect(column_name) as TColumnList)) as column_list 31 FROM XMLTable( 32 'for $i in /CustomerOrder/Data/descendant::* 33 , $j in $i/attribute::* 34 return element e 35 { 36 element TABLE_NAME {name($i)} 37 , element COLUMN_NAME {name($j)} 38 }' 39 passing xmldoc 40 columns 41 table_name varchar2(30) 42 , column_name varchar2(30) 43 ) 44 GROUP BY table_name 45 ) 46 LOOP 47 48 tmp_cols := NULL; 49 tmp_paths := NULL; 50 51 --dbms_output.put_line(r.table_name); 52 53 FOR i in 1 .. r.column_list.count LOOP 54 55 tmp_cols := tmp_cols || ', ' || r.column_list(i); 56 tmp_paths := tmp_paths || ', ' || r.column_list(i) || ' varchar2(35) path ''@' || r.column_list(i) || ''''; 57 58 END LOOP; 59 60 tmp_cols := ltrim(tmp_cols, ', '); 61 tmp_paths := ltrim(tmp_paths, ', '); 62 63 tmp_qry := 'INSERT INTO ' || r.table_name || ' (' || tmp_cols || ') ' || 64 'SELECT ' || tmp_cols || 65 ' FROM XMLTable(''/CustomerOrder/Data/descendant::' || r.table_name || '''' || 66 ' PASSING :1 ' || 67 'COLUMNS ' || tmp_paths || 68 ')'; 69 70 dbms_output.put_line(tmp_qry); 71 72 END LOOP; 73 74 END; 75 / INSERT INTO CUS_ORD_HEAD (CustomerOrderNumber, Customer) SELECT CustomerOrderNumber, Customer FROM XMLTable('/CustomerOrder/Data/descendant::CUS_ORD_HEAD' PASSING :1 COLUMNS CustomerOrderNumber varchar2(35) path '@CustomerOrderNumber', Customer varchar2(35) path '@Customer') INSERT INTO CUS_ORD_LINE (CustomerOrderNumber, OrderedQuantity, ProductNumber, CustomerOrderLinePosition) SELECT CustomerOrderNumber, OrderedQuantity, ProductNumber, CustomerOrderLinePosition FROM XMLTable('/CustomerOrder/Data/descendant::CUS_ORD_LINE' PASSING :1 COLUMNS CustomerOrderNumber varchar2(35) path '@CustomerOrderNumber', OrderedQuantity varchar2(35) path '@OrderedQuantity', ProductNumber varchar2(35) path '@ProductNumber', CustomerOrderLinePosition varchar2(35) path '@CustomerOrderLinePosition') INSERT INTO CUS_ORD_LINE_TEXT (CUSTOMERORDERNUMBER, Text, CustomerOrderLinePosition) SELECT CUSTOMERORDERNUMBER, Text, CustomerOrderLinePosition FROM XMLTable('/CustomerOrder/Data/descendant::CUS_ORD_LINE_TEXT' PASSING :1 COLUMNS CUSTOMERORDERNUMBER varchar2(35) path '@CUSTOMERORDERNUMBER', Text varchar2(35) path '@Text', CustomerOrderLinePosition varchar2(35) path '@CustomerOrderLinePosition') PL/SQL procedure successfully completed6 8 91 710 16 1711 1213 1514 -
Export data to different levels
Hello
I am trying to automate pulling a report out of essbase. The Calc of data export creates a Level0 txt file that is difficult to validate against one online report from oracle. I'm pretty much wanting to pull all top-level except accounts whiich dimension must be at level 0, I can compare the balance in Oracle Hyperion. This must be an automated solution and I will use VBScript to run Oracle sql queries. Is it possible to pull a report at different levels in essbase maxl or any other form? I'm really not familiar with Hyperion reports. Is it possible to run a report of Hyperion via a script and do produce a txt file?
I really appreciate any information on this and hope someone can help.Out the data is quite simple using a report script. In a script to report unspecified dimensions by default to the top of the dimension, so if that's really all you need (i.e. you have no dimension that do not consolidate the Summit or otherwise should be noted) something as minimalist as...
{NOINDENTGEN}
{SUPPAGEHEADING}
!
.. could actually be sufficient as the report script. Script editor for the report of the Administration Console allows to develop and test the script before trying to automate. Much better control the missing / zero suppression and substition, formatting, etc. is possible. The Builder of the technical documentation section is here: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?rw_commands_chap.htmlTo integrate the report script in automation, you can watch the execution of the script of report using the MaxL "data export" command I'm assuming you can afford in your scenario. "export data" allow us you to specify a file for the output .txt. For more information, the MaxL in the technical reference section is here: http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_chap.html.
-
Add an element to a cluster without updating all users of the cluster
I have a cluster that is sent to many different vi. Whenever I have added to this cluster, I need to change every vi that uses it to fix the various controls of input terminals and ungroup by names.
I'm not change or remove existing items in the source cluster. just to add another element that one worries of the vi "shipwreck" for others, it is simply one don't care. Is it possible to avoid having to fix each "sink" vi when I do this? I would only need to update the vi that uses the new element (which of course, I do anyway).
In C, I can update, add a member to a typedef'd struct and everything is fine - no problems; How can I do something similar in LV?
If you branch out a cluster then all sinks must be the same. You should do your cluster a typedef and use the typedef on your screws in this way that you change only one place. Even with the a typedef in C.
LabVIEW manual contains instructions on how to create and use of typedefs.
Maybe you are looking for
-
Help! I have two problems with my Apple Watch and no doubt they are related. #1 problem: I can not pay Apple to be set up on my Apple Watch series 1 (old shows). -C' is my Apple Watch alone, and the only one I've ever owned (work watch OS 3) -J' I ha
-
If I open Firefox and slelect a bookmark before I invite myself for the master password, I am often signed - in the site (e.g. stackoverflow) and then asked the master password. This is clearly not great security!
-
Title says it all. Thank you.
-
I get this message every time I try to install iTunes: Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8 \b25099274a207264182f8181add555d0. Check that you have sufficient access to that key or contact your support team. I tried
-
Hello to all... quick question here... I have a list of *. FileDlgFileName, which I am then saving it in a different directory for example, TDMS files *. DAT files. My question is, how do I take the FileDlgFileName file name (IE, delete the path and