update of error has not

Similar Questions

• I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update.

  I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason

  http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.

• 'Check the updates of Windows', has not highlighted, lack of "Updates of history"

  My Windows Update is unable to work. 'Check the updates of Windows', has not highlighted, lack of "Updates of history". Failed to check the updates. There is no virus, spyware, unwanted software detected. A similar experience?

  Thank you for your response. The Scaner Windows has the result of no viruses, etc..

  I have solved this problem in line with someone, i.e. first stop the service update of Windows, and then delete all the files in "C: Windows/.../Softwaredictribtion/datestore", finally restart the update of Windows. Now it's working.

• On Firefox only, I get problems with a few Joomla sites using the JA_purity template. Error: has not been loaded because its MIME type "text/html", is not "text /".

  Hello

  I updated Firefox on my computer for 13.01. Now, he struggles to read about 2 sites - both are Joomla and based on the model of JA-purity. What happens is that it fails to load the CSS files to do with the side and the top of the Joomla site menus. The file comes up with this:

  because its MIME type "text/html", is not "text/css".
  Source file: http://extensions.joomla.org/
  Line: 0

  This error does not appear with other browsers and it displays perfectly in fact in all other browsers.

  I'm new on this but I read the following article and think it could be my problem

  https://developer.Mozilla.org/en/Incorrect_MIME_Type_for_CSS_Files

  Where Im stuck, it's that I did not fully understand what to make of this article, if I could get a step by step guide to fix this problem that would be greatly appreciated.

  I apologize in advance if the answer lies somewhere here - I have had a look and couldn't get out.

  Thank you
  Alex

  I don't see that the error and all style sheets seem to load.

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Microsoft Security Essentials Client Update Package - KB2754296 has not been installed due to a file epp.msi missing in the network directory, anyone have this problem?

  When automatic update trys to install a Security Essentials update, I get a message saying that the update has not been installed and that the epp.msi file cannot be found in the directory.  I tried to uninstall security essentials and start the uninstaller on but could not find the file epp.mis as well.  The file simply vaporize?

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://experts.Windows.com/w/experts_wiki/89.aspx

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

• Update ESXi3.5U3 to ESXi4 by vSphere update Utility error: host not supported - unhandled setting in startup disk page

  When I try to upgrade my ESXi3.5 Server (which is Xeon E5310 on ASUS DSBV/SAS box with 5 SATA drive on the SAS controller unRAID) to ESXi4

  I got error: unsupported Host - not support layout of startup disk

  What can I do now? Is this bug or just, do not boot from the local disk support?

  Since the fdisk-l to output provided, its clear that the 2nd partition is missing. The 2nd parition in ESXi Installable is the partition scratch (FAT16 file system), which is by default to 4 GB. During the upgrade the parition is resized to scrape (about 150 MB of space is used 4 GB) to extend the bootbanks of 49 MB to 256 MB.

  I don't know the exact reason why the partition scratch missing here since it is generally created during the default installation. One possibility could be that there was a parition scratch already available on a secondary drive during installation and setup it has not created on the primary drive.

  A standard partition for ESXi 3.5 with partition table scratch would look something like the following...

  Disk/dev/disk / vmhba1:0:0:0: 8589 MB, 8589934592 bytes

  Heads of 64, 32 sectors/track, 8192 bottles

  Units = cylinders of 2048 * 512 = 1048576 bytes

  Device boot start end blocks Id system

  / dev/discs / 5 750 763904 5 Extended vmhba1:0:0:1

  / dev/discs / 751 4845 4193280 6 FAT16 vmhba1:0:0:2 < -.

• Field integrated Weblogic error has not been built. JDeveloper 11.1.2.0

  When I try to start the weblogic server that is integrated, I get the following message:
  
  "The Server Instance cannot be started because the Weblogic domain integrated has not successfully built"
  
  --------------------
  CreateDefaultDomain.log
  
  Log file: D:\JDeveloper\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.log
  Label: JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
  Home product: C:\Oracle\Middleware\jdeveloper\jdev\
  Domain: C:\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain
  
  "C:\Oracle\Middleware\jdeveloper\common\bin\wlst.cmd" "C:\JDeveloper\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.py".
  
  Process began
  WLST > the input line is too long.
  
  Duration: 26 ms
  --------------------
  
  Anyone found a fix for this problem?
  
  I use Windows 2000 and JDeveloper 11.1.2.0
  
  Edited by: user11104528 the 07.04.2010 03:44

  Windows 2000 is not one of the operating system that is certified (see here http://www.oracle.com/technology/products/jdev/collateral/papers/11/certification/index.html).
  Seams there is a problem with long path names and the length of the line of control as a result of their share.
  You can try to shorten the path either with a noun and it the value of the home product.

  Timo

• Cc of Photoshop is not updated once around (2015) says: Update error has not U43M1D204. -Windows 8.1.

  Lightroom updated fine.  Using Windows 8.1. 9 (I see solutions for mac in your previous questions)

  Can someone advise what to do in clear steps

  Geoff, I advise you to contact the customer service where the agent can remotely on your machine and solve the problem.

• Update iTunes errors, can not find the file iTunes6464.msi

  Try to update iTunes on PC.

  Windows 7 (64-bit) with Intel i5 processor.

  During an update of base, update errors trying to find the file "iTunes6464.msi" he says is not available.

  I tried to delete all the software Apple on PC, but the file final iTunes will not uninstall because of the same file.

  The new apple software download now error with the same error.

  How can I solve this problem?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Update to SSM40 - has not

  Hello everyone,

  I have a brand new pair of ASA 5540 with SSM40 modules.  I'm trying to update the local software on the SSM 2.  I've been looking around and found a few step by step examples, but I keep getting errors.  The latest version (factory) is 6.0 (6) and I try to go more later from Cisco 6.2 (3).

  SSM01 (config) # update ftp://10.xxx.xx.8/IPS-SSC_5-K9-6.2-3-E4.pkg
  User: anonymous
  Password:
  WARNING: Running this command will apply a software update to the application partition. The system can be restarted to finish the upgrade.
  Continue the upgrade? []: Yes
  Error: execUpgradeSoftware: this package cannot be installed on the platform of the SSM-IPS40, please creditor
  lt the readme for taken platforminformation in charge.

  If someone had the same problem and has a solution I would appreciate the help.

  See you soon

  -mike

  Hello

  The package file, you are referring is not for the AIP-SSM-40, but for the AIP - SSC for the ASA 5505.  This is mentioned in the Release Notes here:

  The IPS-SSC_5-K9-6.2-3-E4.pkg can only be used to upgrade AIP SSC5 sensors.

  http://www.Cisco.com/Web/software/282549758/38029/IPS-6_2-3-E4_readme.txt

  If you try to upgrade the AIP-SSM-40, the latest version should be 4,0000 E4.  This is mentioned in Readme for 4,0000 E4 read:

  SUPPORTED PLATFORMS
  
  The following IPS/IDS platforms are supported:
  
  - IPS 4240 Series Appliance Sensor
  
  - IPS 4255 Series Appliance Sensor
  
  - IPS 4260 Series Appliance Sensor
  
  - IPS 4270 Series Appliance Sensor
  
  - IDSM2 for Catalyst 6500
  
  - AIP SSM-10 for ASA 5500
  
  - AIP SSM-20 for ASA 5500
  
  - AIP SSM-40 for ASA 5500
  
  - AIM IPS for ISR Router
  
  - NME IPS for ISR Router
  http://www.cisco.com/web/software/282549709/35783/IPS-7_0-4-E4_readme.txt
  The file you need for the upgrade is "IPS-K9-7.0-4-E4.pkg", which is available for download here:
  http://tinyurl.com/2wsnl9z
  
  Hope this helps!
  

• Pop - Up Message - automatic update of firefox has not

  Hello
  I have a Mac, Yosemite 10.10.4 running version. I was doing a pop-up message on Firefox indicating that my automatic update has failed. Today, I had to manually update to Firefox 39.0. I am also running Avast Anti-virus for Mac.

  Why are automatically updates does not, and what I can do to fix this?
  Thank you.

  Some anti-virus thinks strains used to update of Firefox are bad-ware.

  https://support.Mozilla.org/en-us/KB/update-Firefox-latest-version

• For the Latist Windows to update an error has occurred.

  The download is complete but not able to install. It was owned the PC Cams, pilots, etc Windows Update error Code was given. Error Windows Update 8024401 b is listed in the troubleshooting update page. Now what?

  Hi Charles,
   
  Thanks for posting on the Community Forums of Microsoft Vista.
   
  Before answering the question, as it seems that updates are on PC CAMS, drivers. We must bear in mind that updates of hardware or driver updated by Windows updates are optional and will have to install them only if necessary. However, the priority is to get these updates/drivers from the website of the provider.
   
  If these updates are indeed necessary, we can try the following steps to get the problem resolved.
   
  1. Click Start, type cmd (right click on cmd and run as administrator).
  2. at the command prompt, type proxycfg-d, and then press ENTER.
   
  NOTE:
  You may need to stop the automatic updates and substantive transfer Inteligent
  Service, delete the C:\Windows\SoftwareDistribution folder and restart the services for the
  setting to take effect.
  Here are the commands you need to execute to execute the foregoing:
  NET STOP WUAUSERV & NET STOP BITS
  RD /q /s %windir%\SoftwareDistribution
  NET START WUAUSERV & NET START BITS
   
  Hope this can help you to take care of the issue of updates.
   
  Kind regards
  SAP U G - Microsoft Support

• I was not able to get on firefox for weeks! It crashes on opening a few seconds. I reinstalled hoping to be updated, but that has not worked. It will not be open even in safe mode. I'm desperate...

  all of a sudden a few weeks ago, I can't have on firefox. It crashes immediately on startup every time anything and journalist accident happens. I studied all the articles and followed their suggestions. I installed the latest version of firefox and still get the same results. I can't even open firefox in safe mode. I don't ' know what else to try and really need my favorite browser back and all my favorites and passwords...

  Since I exhausted all angles throughout January and early February, I can't really identify what makes the difference, but today... IT WORKS NOW! Firefox has been removed from my computer for a few weeks now, so with renewed determination I searched all single folder on my entire hard drive and found 3 random files with mozilla or any part of the word inside mozilla and erased. I turned off the computer and restarted a few hours later. I downloaded firefox 10 (still higher version than the one I was updating of a month) from google chrome and installed it. so thank you for your comments and help!

• Pilot new program installation error has not been properly installed.

  I am trying to install a program called neat receipt and I get the error message with the yellow sign that the driver was not installed correctly.

  Neat makes both software and hardware (scanners).  A problem with a driver suggests you encounter problems with the scanner, not the software.

  However, it is my understanding that newer versions of the software Neat will work with non-Neat scanners.

  Although the best place for support is here--> http://www.neat.com/support/contact-support/, we can try to help, but you must provide the following information:

  • What is the full text of the error message?
  • What version of Windows do you have?
  • What neat software version you have (How can I check which version I use?)?
  • If you have a Neat scanner, see--> http://www.neat.com/helpcenter/scanner-problems-in-neat/
  • If you have a non-Neat scanner, which is his brand and model?
    • Can you use the scanner for jobs other than with the software treated?

• Windows Update, database error has found 0 x 80070490

  Original title - potential windows update of database detected error ox80070490

  Today my labtop computer compag (windows 8) indicates the element of error below.

  1 potential windows update of database detected error ox80070490

  2. windows update components need to be repaired.

  pls advice

  Look at the base for fixing most of the things in windows updates here http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-update-components-must-be-repaired/213206a4-4d36-4d64-b424-13afa6137fac

  If those who don't fix it...  Open the command prompt (admin) and copy/paste

  DISM / Online/Cleanup-Image /RestoreHealth

    This is the fix usually recommended for this.   Takes a few minutes to complete a slow scan.