Update to SSM40 - has not
Hello everyone,
I have a brand new pair of ASA 5540 with SSM40 modules. I'm trying to update the local software on the SSM 2. I've been looking around and found a few step by step examples, but I keep getting errors. The latest version (factory) is 6.0 (6) and I try to go more later from Cisco 6.2 (3).
SSM01 (config) # update ftp://10.xxx.xx.8/IPS-SSC_5-K9-6.2-3-E4.pkg
User: anonymous
Password:
WARNING: Running this command will apply a software update to the application partition. The system can be restarted to finish the upgrade.
Continue the upgrade? []: Yes
Error: execUpgradeSoftware: this package cannot be installed on the platform of the SSM-IPS40, please creditor
lt the readme for taken platforminformation in charge.
If someone had the same problem and has a solution I would appreciate the help.
See you soon
-mike
Hello
The package file, you are referring is not for the AIP-SSM-40, but for the AIP - SSC for the ASA 5505. This is mentioned in the Release Notes here:
The IPS-SSC_5-K9-6.2-3-E4.pkg can only be used to upgrade AIP SSC5 sensors.
http://www.Cisco.com/Web/software/282549758/38029/IPS-6_2-3-E4_readme.txt
If you try to upgrade the AIP-SSM-40, the latest version should be 4,0000 E4. This is mentioned in Readme for 4,0000 E4 read:
SUPPORTED PLATFORMSThe following IPS/IDS platforms are supported:
- IPS 4240 Series Appliance Sensor
- IPS 4255 Series Appliance Sensor
- IPS 4260 Series Appliance Sensor
- IPS 4270 Series Appliance Sensor
- IDSM2 for Catalyst 6500
- AIP SSM-10 for ASA 5500
- AIP SSM-20 for ASA 5500
- AIP SSM-40 for ASA 5500
- AIM IPS for ISR Router
- NME IPS for ISR Routerhttp://www.cisco.com/web/software/282549709/35783/IPS-7_0-4-E4_readme.txt
The file you need for the upgrade is "IPS-K9-7.0-4-E4.pkg", which is available for download here:
http://tinyurl.com/2wsnl9z
Hope this helps!
Tags: Cisco Security
Similar Questions
-
I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason
http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.
-
'Check the updates of Windows', has not highlighted, lack of "Updates of history"
My Windows Update is unable to work. 'Check the updates of Windows', has not highlighted, lack of "Updates of history". Failed to check the updates. There is no virus, spyware, unwanted software detected. A similar experience?
Thank you for your response. The Scaner Windows has the result of no viruses, etc..
I have solved this problem in line with someone, i.e. first stop the service update of Windows, and then delete all the files in "C: Windows/.../Softwaredictribtion/datestore", finally restart the update of Windows. Now it's working.
-
When automatic update trys to install a Security Essentials update, I get a message saying that the update has not been installed and that the epp.msi file cannot be found in the directory. I tried to uninstall security essentials and start the uninstaller on but could not find the file epp.mis as well. The file simply vaporize?
In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse
Additional references may include:
Checklist for installation of Microsoft Security Essentials
http://experts.Windows.com/w/experts_wiki/89.aspxCan I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275 -
Pop - Up Message - automatic update of firefox has not
Hello
I have a Mac, Yosemite 10.10.4 running version. I was doing a pop-up message on Firefox indicating that my automatic update has failed. Today, I had to manually update to Firefox 39.0. I am also running Avast Anti-virus for Mac.Why are automatically updates does not, and what I can do to fix this?
Thank you.Some anti-virus thinks strains used to update of Firefox are bad-ware.
https://support.Mozilla.org/en-us/KB/update-Firefox-latest-version
-
all of a sudden a few weeks ago, I can't have on firefox. It crashes immediately on startup every time anything and journalist accident happens. I studied all the articles and followed their suggestions. I installed the latest version of firefox and still get the same results. I can't even open firefox in safe mode. I don't ' know what else to try and really need my favorite browser back and all my favorites and passwords...
Since I exhausted all angles throughout January and early February, I can't really identify what makes the difference, but today... IT WORKS NOW! Firefox has been removed from my computer for a few weeks now, so with renewed determination I searched all single folder on my entire hard drive and found 3 random files with mozilla or any part of the word inside mozilla and erased. I turned off the computer and restarted a few hours later. I downloaded firefox 10 (still higher version than the one I was updating of a month) from google chrome and installed it. so thank you for your comments and help!
-
I have problems with Muse and Photoshop, when I update I get an error saying microsoft updates are needed... I'm going to Microsoft and it says updates are not applicable. I've updated my window system 7.
Don't know what to do at this point. Any suggestions?
Hi Bren9999,
Kindly share the full error message with us or join the screenshot of it here, see:FAQ: how to capture and after a video screen or blow?
In the meantime you can check: Error: api-ms-win-crt-runtime-l1-1-0.dll is missing.
Let us know if that helps.
-
I tried to enter in Firefox today and he said he was doing an update and Firefox would start in a minute. He did, but I was unable to access a Web page, including of mozilla.org. I thought I had a problem with the internet connection, but I could ping these same stations, achieve with IE (which I HATE) and my Vonage (VOIP) phone worked without problem. I tried to restart and stop, finally tried to reinstall FF. It say download, then stops and says download. There is a button to resume, but he isn't back. Finally, I decided to uninstall FF and tried installing again. Same result. Now I have no FF at all. I can use IE, but it's the hassle, simply because it's IE. I even tried to install 29.1 FF with the same result.
finitarry,
THANK YOU! That did it! I really appreciate your quick reply and your expertise.
Ron
-
Update of Vista SP2 MBR has not installed? 0 x 80004002
This has been asked before, but the link given a Microsoft Support technician has been no help and not even related to this problem.
When I run the normal Zune 4.7 installer it says that it cannot connect to Microsoft Update. I received the package from microsoft and who was running and I get the error "the installer must stop because the perl 'Vista SP2 Update MBR' package has not been installed.«Error code: 0 x 80004002»I tried to install this for a week now.(I tried to uninstall SP2 and re - install, which installed successfully and I still get this message... help?)Edit: I tried uncompressing the installer and run the .msi file in the package folder. It starts the installation and the load completely bar then go back and cancel all. During "installation" error boxes pop up.' FirewallCA 21:34:09.700: 'PreserveWirelessFwRuleConfig' operation has completed with the outcome 0x80070005. »' NssCA 21:35:11.055: 'UnregisterUrlNamespace' operation ended with the result 0 x 80070002. »' DriverCA 21:36:27.806: 'InstallHardwareDriver' operation ended with the result 0 x 80070057. »The "Zune" shortcut that had appeared on my desktop disappears.A Zune file appeared in my Program Files folder, but the only files in there are Zunewmdu.dll Zune WmduResources.dll and a folder called 'en-US' with ZuneWmduResources.dll.mui inside.Running Vista Home Basic 32-bitYou must register a dll file
1 goto Start > Run
2. Type "CMD" and press enter
3. in the command window type "regsvr32 c:\windows\system32\wuaueng.dll" and hit enter
4 run the Zune install again -
MY ipad has not automatically closing after update to ios 10
MY ipad has not automatically closing after update to ios 10
Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.
-
Hello
As the subject says, my Firefox crashes now immediately at startup. (It's on Windows 10 64-bit.) Here is what I tried which did not fix the crash:
-Refresh
-Reinstall
-Disable all addons
-uninstall the software which provides plugins (Flash, Acrobat Reader)
-delete the profileHere are the situations where Firefox goes not down:
-safe mode
-use every night instead of 40.0.3.This is one of the first reports of the crash from today (before I tried a ton of things):
https://crash-stats.Mozilla.com/report/index/BP-50b4ac99-cc1f-4157-93cd-5ad192150920And here is one of the latter:
https://crash-stats.Mozilla.com/report/index/BP-caf2ff15-3d5a-45ff-bc00-cd58b2150920Any help would be greatly appreciated. Thank you!
Given that could start Firefox in Mode safe, you try to disable Firefox to use hardware acceleration?
"3-bar" menu button (or tools) > Options > advanced
In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.
This takes effect the next time you exit Firefox and start it again. Any difference?
Normally, I give the following advice, but for Windows 10 users, the problem can actually be that Firefox has not caught with driver to the latest updates. Your experience with nightly suggest that this is the case with your hardware. (But I'll list anyway...)
Because hardware acceleration improves the appearance of fonts and animations, you can check the website of your computer manufacturer to see if the graphics card/chipset driver updates are available for your system. This article suggests ways sure to check: update your drivers graphics to use hardware acceleration and WebGL.
-
Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera
Mhefzi86 wrote:
Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera
OK, thanks for sharing.
Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.
-
iBooks has not worked since last iOS 9 update... why?
iBooks has not worked since last iOS 9 update... why?
With no information, it is impossible to help. What do you mean by "didn't work" (app is not open, you can not open the books within the application, books don't download from the store,...?), and what you've tried to see if that solves it (e.g. close the application via the task bar of the phone, soft-reset/reboot of the phone, backup and copy purchases through iTunes on your computer and restoring the backup library)?
-
laptop has not updated monthly
Hello
My g6 notebook Pavillion has not updated recently. I do not disable the automatic updates. I'm not familiar with windows 8, and I can't find where I can check the updates.
I also don't seem to be able to run Defenter Windows offline. I searched for it and tried to open it, but the screen indicates that the application has been disabled and I can't get the app to turn it back on.
I'm trying to understand why my computer keeps giving the error DPC_WATCHDOG_VIOLATION. Help, please
GoldeenEyes,
Windows Defender in offline mode is a software from Microsoft, here's the FAQ: Windows Defender in offline mode: frequently asked questions
The DPC error may be due to the way in which your system reacts to the video drivers. Update. If you're a gamer and this error is in response to the game, you may have to resort to using the vendor drivers for best performance. IMPORTANT: Do not update software unless you have ALL your backups up-to-date first taken! Learn about backups if you want more information!
The good news about Windows 8: easy search! Go to the home screen and tap anywhere on the screen: "updates" (without the quotes).
You will see both the HP updates AND programs of Windows updates appear on the screen. You can start a program, set the PARAMETERS and start an update, or you can right-click on each program and open the 'place' of the current program. You can then make a shortcut to the program and put this shortcut on your desktop.
I hope that helps!
Click on the star of congratulations !
It's a big 'thanks' for Experts who offer to help!
-
An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?
It is one of the many problems that occur on my mac.
Update of OS X El Capitan 10.11.4?
1. backup Mac.
2. install 10.11.4 combo update.
https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US
Maybe you are looking for
-
HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card
Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer. From what I see, the motherboard has a PCIe and two PCI card slots. Computer model is XL510AV Any help is
-
Equium P200D - Question about running out of space on the HARD disk
First of all, let me say that I am a Silver Surfer and don't know much about how works laptop or where it stores information!I don't am not in the least HI - TEC so please be gentle with me. I use an older Equium P200d for 1 year with two 40 GB hard
-
"You do not have permissions to access this folder" after copying the files on server 2012R2
Recently, I've copied the 600GO files and folders using Robocopy from 2003 to 2012R2. No problem with the copy, but the properties of the root of the copied files showed a number of size and file incorrect directory to the same directory on Server 20
-
Questions about buying a new computer.
My computer tells me that Microsoft will stop supporting Windows XP in April 2014. They suggest that the search for a new computer that my computer will not support Windows 8. All computers that I have watched have Windows 8 is already installed. Now
-
I want to be able to have an indicator that tells me that when the caps lock is on