update of hp compaq nc6000

Similar Questions

• HP Compaq nc6000: HP Compaq nc6000

  I'm stuck on my HP Compaq nc6000 and what Iboot it it says the hal.dll file is corupt or missing whenever I start. When I crush the F10 key it says in the corner "enter the configuration... '. "and then beeps a little and shows me a login screen admin password and when I press F10 once more it says again"enter the configuration... '. "and he never enters the setup... Here are some pictures below what it looks like:

  

  

  

  

  

  

  TNX... power on the laptop is dead and I then pluged in there and it works with this screen scanning where he did was scanned all the data on the disk HARD e had the top of page KB. At the top of the screen, he had what I think is the product number of the laptop (but there's a underneth the laptop sticker that shows the product code then...) or the number of copies of the laptop... and when he was done with that she told me about backups were unregistered. then he asked me with a few options... save, proseed without saving changes or witch (Start menu) of F10 when I tried the option of start menu thinking he was asking me a password for admin rather sent me to start in the back style screen and menu menu... so I'm now doing the self-test 'HDD' here is a picture of what happens...

  

  and Bay... the way the fan works and earlier, he went up to 20% on 'Test 2 (full) '.

  and while the Test 1 (fast) was up to 90% in a minute or two Test 2 after a minute or two is about 5% or more...

  * edit to leave a few minutes after it was posted *.

  I finally had the scan and it says sicsesfull!

  

  system screen

  

  startup options

  

  information system

  

  

  Windows installation program (to order in our Association, what I did do "notebook multi-baies" 1st and 2nd HARD drive

  

• HP compaq nc6000... reinstalled, but no wireless connection

  Hi, I just reinstalled a new XP Pro in a hp compaq nc6000... This moment, everything works perfectly, except for the Wi - Fi connection. And all that although I have a Broadcom 802.11 Wireless Lan Adapter, a Hp Integrated Wireless LAN Driver W400-W500 and a Broadcom Gigabit Integrated Controller installed. (as shown on my list to the software). However, when I look at the list of the material of my wireless connection, there is only an installed infrared adapter. What hurts? It seems to me jumped something... Can someone please explain? Thnx ahead!

  In fact, it was this post that gave me the idea to do the same. I just installed a Sitecom wireless adapter... and it works very well... !!

  Even the prepaid-USB user using normally with this laptop, works allright!

  I really enjoyed reading your suggestions together and liked first of all try, really I learned from you!

  Thanks for the support!

  We did it!

  
  Intel WiFi Link 5100 AGN does not connect Options      roses
  Visitor
  Messages: 1
  Registration date: 12/04/2009
  
  
  

  Message 1 of 8
  
  3 610 views

  
  

  I'm having a problem getting the Intel WiFi Link 5100 AGN on my HP Pavilion dv7-1275dx to connect to my router (Zyxel P334WT). It would connect intermittently, then disappears for no apparent reason and then refuses to connect for days. I contacted HP support and we spent three hours trying to solve the problem without success. Curiously, when I paste my adapter wireless Netgear WG111v2 USB into the computer, I am able to connect to my network without problem. The computer running Windows Home Vista 64-bit. Thanks in advance for your help.

  Bravo! Thank you!

• I recently formatted my old hp laptop compaq nc6000. and I try to install a new system of operation

  I recently formatted my old hp laptop compaq nc6000. and I try to install a new operating system windows 7. the problem is that you cannot boot from the cd it shows BOOTMGR is missing press alt + ctrl + del to restart or when it starts, it displays the press any key to boot from the overflow of memory cd THAT BOOTMGR is missing, press alt + ctrl + del to restart. What can I do I really want to use it as soon

  its not authentic I have it burned the ISO download?

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• HP compaq nc6000 hard drive SATA or PATA

  Is my hard drive HP compaq nc6000 a PATA or SATA?

  Message edited by RetiredNick on 01/26/2009 12:21

  It's PATA - thank you

• Compaq C700: update T5750 processor Compaq C700

  Hi all

  I am using Compaq C700 (Vista version) laptop, I want to update to use VT - X virtualization technology.

  my current processor is Core2Duo T5750

  Version of the BIOS F.33

  Chip Set: Intel GM965

  Please suggest me justifiable processor virtualization VT - X.

  Kind regards

  Aneesh Ansari

  Surprisingly, I could still locate the Service Manual online:

  Manual

  See p. 87. The BIOS has a VT and disable toggle, so you should get hardware virtualization if you install an approriate processor.

  You may get cheapest one would likely be the T7100:

  http://Ark.Intel.com/products/29759/Intel-Core2-Duo-processor-T7100-2m-cache-1_80-GHz-800-MHz-FSB

  Hard to beat $6 one of the best mobile eBay parts sellers, delivery included:

  http://www.eBay.com/ITM/Intel-Core-2-Duo-mobile-T7100-1-8-GHz-Laptop-processor-CPU-LF80537GG0332M-SLA4A-/361357436636?hash=item542294e6dc:g:9DgAAOSwAKxWa70P

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Problem with the choice of screen update on HP Compaq Pro SFF 6300

  My HP Compaq Pro SFF 6300 continuously lists "HP Compaq Business Desktop System BIOS (BIOS K100)" as an element to be updated - even if I chose and installed this update several times.  What is going on?  Thanks for any help or information.

  Thanks for the additional information.  I'll follow your advice and simply ignore the request to update.  Leave well enough alone, given that the computer works well at the present time.  Once again, thank you.

• HP Compaq dc7700p: how to fix '1801 Microcode Update error' HP Compaq dc7700p Convertible Minitowers

  Hello

  I read and read this post for a few times and I'm not sure it will work on my PC so I have to ask, how to solve '1801 Microcode Update error' in HP Compaq dc7700p Convertible Minitowers I upgraded it with E7200 instead of the original E6300

  Here is the product number: p/n RN120ET #UUZ

  I am in a position to start and start windows, I don't know is that it works normally or not, I'm just bored with the startup message:

  Please HELP and thank you in advance!

  Hello:

  You must upgrade the BIOS to version to get rid of the error of microcode, and processor at half the speed of the FSB only works because the update of the BIOS was not written for the E7xxx processors work correctly.

  You will need to run this software whenever you enter windows and change the multiplier up.

  Or you can run this batch file listed on the bottom of Web page so that it runs automatically.

  http://CrystalMark.info/software/CrystalCPUID/index-e.html

  If I were you, I just install an E6700 Conroe and have an update without problem.

  You will need to use the BACK base flash because I don't think that there is an update of the BIOS written for W7.

• Automatic update blocks my Compaq Presario

  My Compaq Presario has been frozen for more than one full hour to 61% in step 3 of 3 of automatic updates.   Because I told

  Don't go off, what do I do?   Thank you very much.

  Hank

  He give some more time, 1/2 day.

  If you have hard to turn it off, and it stops working:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.
  Mick Murphy - Microsoft partner

• Updating BIOS for Compaq Presario V5201US with the version of BIOS F.41

  Hello. Is it possible to update the version of the BIOS for my Compaq Presario V5201US laptop? This version is F.41

  There is a BIOS F.54 available here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3184257#n765

  The problem is this is an executable of Vista and there was problems with trying to flash executable under Windows 7 Vista if that's what you run. What problem do you think that will set a BIOS update?

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Updated my HP Compaq nw8440 Windows 8, but faced problems

  I upgraded my HP Compaq nw8440 Windows 8, but facing some problems. I have all the drivers I used on Windows 7 and I installed everything, but nothing seems yet intalled. No video card is installed, No Sound Card or any other device like finger print etc. More little programs like Adobe Photoshop does not run on it. Can you help me please?

  Hello:

  This time, your chance is probably exhausted.

  While I was able to help you get everything working on W7 which was not supported in your notebook for the last time, I think that W8 is not going to work.

  In any case, nothing venture nothing have nothing, so let's give it a try.

  First of all, download and run the graphics driver for Vista. Conclusion of any errors that may appear.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1839152&prodNameId=1839208&swEnvOID=2103&swLang=8&mode=2&taskId=135&swItem=ob-71898-1

  Go to Device Manager and click on the display of the maps section to show the Microsoft base adapter display.

  Click on that and then click on update driver driver. Select the 'Browse my computer for the software' and navigate to the installation folder that was created when you ran the file.  Who will be in C:\SWSetup\sp43656. Make sure that the include subfolders is selected and if all goes well, the driver will be installed.

  Do the same for the audio driver.  Simply browse through the number of different files.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=1839152&swItem=ob-54354-1&prodNameId=1839208&swEnvOID=2103&swLang=8&TaskID=135&mode=5

  If the audio driver will not install, access device, being connected to the internet Manager, click the multimedia audio controller and click on the driver tab, click on update driver then Auto search. See if windows update detects a driver that works.

  You should try to install the driver of fingerprints of Vista and see if it works. Try to Auto or manual.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1839152&swItem=ob-60526-1&prodNameId=1839208&swEnvOID=2103&swLang=8&taskId=135&mode=5

  You can try the software W8 protect the tools of this model and see if it records your fingerprint.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212907&prodNameId=5212908&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-114888-1

  If none of this works, abandon any hope of obtaining W8 work on your PC, and back to W7.

• HP Compaq dc7800 Convertible M: CPU update for HP Compaq dc7800 Minitour Convertible

  I have a hp dc7800 cmt computer intel core 2 duo e6550
  
  I bought Brosissour e8500
  The installation seems to me that the problem
  "microcode update error".

  Hello:

  The E8500 must have worked.

  I suggest that you update the BIOS to the latest version.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459248 & swItemId = vc_97114_1 & swEnvOid = 4059

  Since you are using W8.1, you will have to flash the BIOS using the method based on the BACK.

  Not only run Windows based BIOS flash.

  Before update you the BIOS, remove all that that can be connected to the PC, except the keyboard, mouse and monitor.

  There is a flash ROM control system contained in the file menu in the BIOS.

  You will need to format a Flash DRIVE with the FAT32 file system.

  Download and run the BIOS to support dc7800 page was last updated.

  An information page will open and show you the different methods to Flash the BIOS.

  What you want to do is to use the instructions F10 Setup of the BIOS flashing .

  This article, you click on the blue link BACK Flash directory and this will bring you to the bottom of the page to another blue link that is labeled View of BACK Flash content folder.

  Copy the contents (files) in the folder flash BACK to your USB.

  Plug the USB key into one of the front USB ports.

  Restart the computer and press the F10 key to enter the BIOS.

  Select the file Menu.  Then in this menu, there is a Flash ROM of system command.

  What to choose, and then select USB and PC should see the files on your USB flash BIOS.

  Follow the instructions to update the BIOS.

• PC939A #ABA: update of HP Compaq dc1700 SFF memory?

  I need to upgrade the memory of my HP Compaq dc1700 LTS and if I upgrade the processor to support the maximum capacity of ram, then let me know! What is the maximum RAM anyway, as in the UK, there are 4 RAM slots.

  Hello:

  Here is the link to the quickspecs for your PC.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00229814

  The news of upgrade memory are listed.  (4 x 1 GB PC3200).

  No need to do anything with the processor.

• update of my compaq 110 c

  Need help with the update of moving more slowly then usual and always say a low disk space...
  Help, please

  You have filled the hard disk. You need to move things out of it. A USB would be good for this.