PC939A #ABA: update of HP Compaq dc1700 SFF memory?

Similar Questions

• Problem with the choice of screen update on HP Compaq Pro SFF 6300

  My HP Compaq Pro SFF 6300 continuously lists "HP Compaq Business Desktop System BIOS (BIOS K100)" as an element to be updated - even if I chose and installed this update several times.  What is going on?  Thanks for any help or information.

  Thanks for the additional information.  I'll follow your advice and simply ignore the request to update.  Leave well enough alone, given that the computer works well at the present time.  Once again, thank you.

• How can I find a graphics driver for my hp compaq dc7100 sff

  My computer is a Hp compaq dc7100 sff, is to install the operating system is windows 7 32 bit

  Hello:

  Please follow these instructions and see if the video driver installed.

  Your integrated graphics (GMA 900) is not capable of Windows 7.

  I can send you the link for a pilot who has to work a lot better, but you never have Aero.

  Here is the link to the driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-47264-1 & mode = 4 & IDX = 0 & prodTypeId = 12454 & prodSeriesId = 3352967

  You need run the package. It will extract the drivers and it will then give you an error operating system not supported.

  Close the error window and then manually install the driver by clicking on the video controller in Device Manager. Click the driver tab click on update driver. Select the "Browse my computer for the software method.

  Navigate to: C:\SWSetup\sp34749, make sure that the include subfolders is selected and the driver should install.

  It should be much better than what you have now.

  Paul

• HP compaq dc5800 SFF: Trusted Platform Module 1.2

  Hello I have a desktop HP Compaq dc5800 SFF pc. I need driver for Trusted Platform Module 1.2, my hardware is: ACPI\IFX0102 * IFX0102

  Go to Device Manager and click on the device TPM that need the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp40553.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If it isn't, I suggest you to install the latest chipset driver Intel for your PC and if you have not been updated to W7 SP1, do, because as I said, there is no need to install this driver on Vista or W7.

  Here's the latest Intel chipset driver for pc... Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• A HP Compaq dc5750 SFF PC can be upgraded to support a 3.4 ghz amd phenom II x 2 565?

  I have a laptop compaq dc5750 SFF. bought about 2 years ago. It has an AMD ATHLON processor. I want to update for AMD PHENOM II X 2 565 3.4 ghz processor. my PC motherboard can support the it? If this isn't the case, then please recommend changes.

  Thank you

  Pratik b.

  No, it cannot support the Phenom II processors and it will work without any mods that will do it.

  Frank

• Can I update to this processor DC7900 SFF?

  -Hello, I have a PC HP - Compaq DC7900 SFF with a processor Intel E7300 (Core 2 Duo), and I want to update this processor by an Intel Q9650 (Core 2 Quad) (only to change the processor)?

  -Thank you.

  Hi, Pepito,.
  
  Yes you can upgrade this processor is compatible.
  
  Click on "Bravo Star" icon on the left side so resolute.
  
  I am an employee of HP, but the comments in this forum is of myself and is not HP

• update BIOS hp dc 7900 SFF

  I downloaded and installed the latest version of the BIOS for my HP DC 7900 SFF. He acted like it was installed but it didn't. I checked the version before I installed it and it was the same thing after I was. I'm running Windows 7 Ultimate, do I need to downgrade to XP BIOS update?

  Please see HP Compaq dc7900 SFF Business Desktop System BIOS (BIOS of G 1 786) download the BIOS v1.26 for your computer. This download should install on Windows XP, Vista and 7, too. Please note;

  This package contains utilities that can be used to restore or update the
  BIOS system on models taken office in charge with a BIOS G 1 786.

  Several methods to change the version of the BIOS can be chosen. Included in this
  the package are the following:

  -Use the utility BACK with the environment (PXE) performance of seed management
  application to update locally or to restore the BIOS OF THE system.
  -Use HPQFlash for update the BIOS directly in a Microsoft Windows
  environment.
  -Create a CD image for system BIOS update/restore.

  WARNING: after installing this BIOS version on the system, the prior BIOS
  versions cannot be installed on the system.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Compaq d530 SFF DIMMs do not recognize. Windows Vista Home Premium 32 bit - BIOS version 02.44

  Hello HP community!

  I recently got a HP Compaq d530 SFF of the company, where I had my work experience.

  Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.

  I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.

  I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).

  Maybe someone has a suggestion how to fix this?

  I've already updated the version of the BIOS at 02.44 (later I could find).

  Thanks in advance!

  Yours sincerely Simon Cahill

  Beatsleigher,

  Not all memory is the same, even when picking PC2700. Did you buy non ECC?

  Here is a guide on the configuration of the memory for the D530SSF

• HP compaq dc5100 sff: loss of internet connection on desktop after installing windows 10

  Update from windows 7 to windows 10 and I lost my internet connection. My connection is good, the son, all good router. Windows 10 seems to work great except no internet. She said "not connected-no connections are available. So is it not reconizing him actions card built in the Board of directors or what. I tried to reload the drivers. I can use any help I can get. I have a hp compaq dc5100 sff with 3 GHz, computer of office 2 GB of ram. I've updated my laptop and it works fine. If I can't understand, I guess I'll go back to windows 7. Ideals, let me know...

  Ok.

  The only suggestion I can offer would be to install the latest driver ethernet directly from BCM and see if it works.

  I think you need the first driver on the list for 32 bit.

  http://www.Broadcom.com/support/?GID=9

  You will need to manually install the driver for the adapter ethernet BCM in the Device Manager, as the file contains only the driver files and no setup.exe file.

• The fan runs super fast. HP Compaq dc5100 SFF

  These days HP Compaq dc5100 SFF - or fans have aired the apparently fast fan speed.

  Was full of dust (to the point of blocking the absorption on the front fan)

  Used an AIR CAN blow the dust out with the lid open.  We also had a blip of brief power in the last days - caused a stop down.  And we have updated some business software.  Has been restarted.

  We have 3 more of the same model which are OK

  Thanks for any help

  The SFF dc5100 is notorious for bad capacitors on the motherboard.  I had one where the fan ran at top speed all the time.  There was a swollen capacitor located at the end of the PCI 1 connector.  It seems C469.  It's a 6.3 volt 1000uF cap.  I replaced the capacitor and that fixes the problem.  To keep the computer cool lengthens the service life of capacitors.  It is wise of the dust periodically in order to cooling air flows.  How always, once a capacitor going bad, the only solution is to replace it.  A burned capacitor will be inflated. The flat top normally will be curved upwards and, possibly, a leak of a crispy Brown material.

• Noise of the extraordinary fan on HP Compaq dc5000 SFF

  I used the same HP Compaq dc5000 SFF to work for several years. It has an eccentricity that can be infuriating: if I'm the scene work processor, the fan goes into overdrive and in a few moments, I feel like I'm in a 757 taxiing on the runway at JFK airport.

  I wonder if this problem may have been treated by a BIOS upgrade. (To my knowledge the BIOS has never been modernized.) In all cases, these machines are very common in my office and I have yet to visit a person using one that is familiar with the level of db fan I meet several times a week.

  Any ideas?

  Thank you.

  Hello:

  Here is the link to the BIOS for your PC release notes:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 403745 & swItem = ir-63382-1 & prodNameId = 403747 & swEnvOID = 1093 & swLang = 13 & taskId = 135 & mode = 5

  None seem to approach a noisy fan.

  I open the case (after such normal precautions that unplug the power cord, etc.) and look for the dust clogging the fins of the heatsink and fan blades. If there is dust, it is most likely the culprit causing the fan spinning upwards.  Use a can of compressed air to clean the dust from your PC case.

  If it's clean, then I guess the thermal interface material between the Processor heatsink the heatsink of surface has dried and you do not have a good heat transfer between the processor and the heat sink (your processor is overheating, but not thermal breakpoint).

  The repair is to remove the heat sink. Remove the old thermal paste from the heatsink and processor apply new thermal paste and go back.

  Here is the link to your service manual:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c00093003/c00093003.PDF

  Paul

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• pouvez ATI RADEON X 1550 compatible to hp compaq dc7800 sff

  IM planning to buy a vc that atleast can run 3d games slowly.

  Can ATI RADEON X 1550 compatible to hp compaq dc7800 sff?

  Here is the specifications is:

  Operating system: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Compaq dc7800 Small Form Factor
  BIOS: Default system BIOS
  Processor: Intel (r) Core (TM) 2 CPU 6320 1.86 GHz (2 CPUs), ~1.9GHz
  Memory: 3072 MB RAM
  Available OS memory: 3042MB RAM
  Page file: 1651MB used, 4430 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode

  and if its compatible. How can I disable the integrated vc? and if not, can you suggest a good vc compatible in my system unit?

  ---------------
  Card name: Intel(r) Q35 Express Chipset Family
  Manufacturer: Intel Corporation
  Chip type: Intel GMA 3100
  DAC type: internal

  Hello:

  The info that I could find, X 1550 can develop 27W power, which is very good for your PC.

  So, if you have one, all about the pose that will fit in your case, then it should work without problem.

  Why not opt for a more modern card and get a Radeon HD 6450?

  This is the map used in the 8200 Elite SFF that has the same power 240W.

  He would use the subject of the same power - or even less.

  Just make sure that you get a low profile with the extra-thin bracket card.

• problem installing windows 7 on my HP compaq d530 sff Ultilmate

  Dear,

  I can't install windows 7 on my hp compaq d530 sff!, I've done several times, but unfortunately accept no more!. Here is the message I get after clicking the load the driver: "to install the device driver required to access your hard drive, insert the installation media containing the driver files, and then click ok. -No driver device not found, make sure that the installation media contains the correct drivers, and then click ok. » !

  I have not change anything my PC all Setup, I can install windows XP without having any problems, but I want only 7 must be installed on my desktop as before. any professional help would be great

  Concerning

  It's a venerable plu model corporate office. Considering how long it has been being used, that you might want to replace a desktop PC for more modern.

  You can have more success get a response in the HP Enterprise Business Community.

  Here's a discussion of 2010 on a very similar than your question

• Grafic of NVS 295 card work in a Compaq dc5700 SFF

  I have a desktop HP Compaq dc5700 SFF and want to connect 2 monitors. The NVIDIA Quadro NVS 295 works in this office? It is not apear in the compatibility list.

  WalFish, welcome to the forum

  I can't tell if NVS 295 card will come or not.  However, here is theinformation provided by HP on the options of the video card of the computer.  Personally, I would not install a card that is not listed.  It is not supported by HP.

  If your problem is solved, please click "accept as a Solution.