Update of USM 3.3.0 to 3.3.1

Similar Questions

• Satellite L30 - 11 d: update Bios to boot from USB

  I have a Satellite L30 11(d) bought Sept 07.

  I'm interested in trying to boot from USB, at the present time, my bios does not.
  I am looking to update my bios. There is a updated bios updated for me to download (3.10WIN).

  I have 3 questions:

  (1) 3.10WIN allows to boot from USB?

  (2) is 3.10WIN related to the use of MS Vista? (Looking at this article , it seems that the new phoenix / toshiba bios only allows panoramas...?)

  (3) how to settle?

  (with ubuntu 7.10 works well... aside from the sound)

  As to the question;

  (1) No, it is not possible to boot from a memory stick USB HDD or USM

  (2) each BIOS for each series of Toshiba notebook is different! Please don t no matter what other laptop computer BIOS or fixed PCs. Satellite L30 - 10 d belongs to the series of the 3,10 and PSL33E BIOS is OS independent. If your laptop comes with XP then the BIOS supports XP completely. Of course, you can try to install Vista but it is possible that some features of the laptop as FN keys will be does not work

  (3) the BIOS should always be done in the Windows operating system. As you can see on the page of the Toshiba driver the BIOS version is called 3.10Win - version

  Greetings

• 70-200 F2.8 IS USM III?

  Y at - it a scheduled update, or rumor to the legendary canon 70-200 F2.8 IS USM II? It has been five years since the update and I want to get one, but not if it will be updated in the next season.

  Thank you

  Kevin

  Lenses in general don't you a refresh unless there is a reason to make an update.

  The EF 70-200mm f/2.8 L IS USM (original) was (and still is) a VERY good lens.   The brand 'II' version of this improved lens - lens is very very slightly more sharp in the Center and slightly more slightly sharper on the edges. Image stabilization is also improved.

  The Canon EF 70-200mm f/2.8 L IS USM II is currently not just the best of 70-200 lenses that can fit on your gun... but the best lens in this category in the whole of the industry (nobody does a better 70-200).

  Sigma, Tamron, and Nikon have all the lenses either the same or very similar focal length ranges available with opening of f/2.8... but they all have very important questions "breathe."  All lenses have questions of "breathing" to a certain extent.  "Breathing" means that if you look very carefully at the edges of your frame, and then change the focus, you will notice that as the focus changes, the goal seems also to be zoom in or out (just of the changing object - is not in contact with the zoom ring).

  On the Canon, this "acquire" is insiginficant... at the end of 200 mm, respiration can change by maybe 10 mm tops.  But the Sigma, Tramron and Nikon versions have significant breathing... depending on your purpose, your focal length can be only 130 or 140 mm (even though the zoom ring says you're at 200).

  I think that you are pretty safe in this Canon custom likely update this lens anytime soon.  There is simply not any reason, update again.

• Given to nine EFS 17-55 2.8 USM

  I've recently updated my old kit lens (18-55) for my RebelXS with a refurbshed EFS 17-55 2.8 USM and were a little disappointed that my nature photos have not been that much greater. Any ideas or advice out there? Is there an apeture setting which is best for sharpness with this lens?

  Thank you

  Do you have mounted your new lens with a filter of "protection"? If so, remove it. I saw filters get dirty with focus and sharpness.

  You have the lens hood? Otherwise get it and use it instead of the filter. It provides protection for the right lens and can even help with emphasis in keeping some oblique light-off the lens.

  Most lenses have stop down a bit. Ideally, a f2.8 lens may be the best at f4, although it is likely still enough 'usable' expansion Xtreme. Even stopped down to f4 to all its focal length is always a little better that your old kit lens, where closing window would place f5 at one end of the zoom range and f8 to another.

  I agree with the previous answer, too... be careful not to use too small an opening. Beyond F8 diffraction will start to steal the image of small details. At f11 it's probably little that they aren't a problem, but I do that on my limit on a device to sensor harvest like yours. Avoid the f16 and f22.

  The 17-55 also has IS, which may or may not have your 18 - 55. IS can help a lot with sharpness, especially at slower shutter speeds. I would use it all the time when shooting handheld or on a monopod... even on a tripod "loose." However, if locked securely on a tripod, it may be necessary to manually turn off IS at the level of the switch. I am not sure of the 17-55, but on some lenses with stabilizer, when there is absolutely no movement that IS can go into the sort of a feedback loop that actually causes a movement! That may resemble low sharpness. So if you use the lens firmly locked on a tripod, try to disable the IS.

  Another advantage of the upgrade, the 17-55mm USM focus which is significantly better than the micro motor in your kit lens. It might not be too visible in good light, but in more difficult situations I bet you will find the updated faster lens to the point, as well as more uniform and precise... more silent, too.

  There's a chance that what you bought is not to spec for some reason, he might even have gotten damaged in transport. I suggest that you go shoot a lot with her and see if you can not get good results. You can do a few carefully controlled tests with the camera and lens on a tripod and to shoot a detailed subject as a wall or a fence damaged. If after a few additional tests and shooting you still think that the lens may be defective, talk to Canon to check or make an exchange for you.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• Canon lens EF 70-200mm L F4 USM + 2 X L series extender

  Hi, I have a Canon lens EF 70-200mm L F4 USM. Now, I want to buy an extension of series X L 2. Can someone help me by informing that AF can work with EF 70-200mm L USM F4 + 2 X Extender mounted on 650 d device and how much image quality I have to make compromises for the same thing.

  mithun_pal129 wrote:

  Thank you all for your valuable comments. I forgot to mention that my intension of extender to my EF 70-200mm L F4 USM in a telephoto lens for wildlife / birds. But now that I'm your stay in Abu Dhabi, he is not paid a lot of bird / wild life. This is why I don't want to spend a lot on super telephoto, and personally, I don't want to go to cheap Sigma lens. So I wanted to do objective 70-200mm + 2 Expander x 140-400 mm. As I myself feel 1.4 X extender is pretty good, but it will give me up to 280mm. I know that's not very good lens for bird / wild raise photography. But you want to know still is feasible or if I use 2 x Extender to make the 400mm autofocus lens is required for the wild life or manual focus can still operate at F8. I don't have a lot of experience in the photography of wild life that's why I wanted to know things.

  In a Word... N °

  Of a 2 X teleconverter on a 70-200/4 made for a lens of 140-400/8 "effective." Due to the reduction of light reaching the AF sensors, your camera will turn off autofocus. A stronger 2 X also "costs" more loss of quality of the image due to the deterioration.

  It is possible to tape on some of the electronic contacts on the focal length multiplier, so that the camera does not know it is there and always try to auto focus. However, the autofocus will be much slower and will tend to hunt much more.

  In some situations, you may be able to manually update. However, effective f8 makes for a pretty weak sight, most cameras update automatic modern as you do not have some fo the features allowing the development manual, vintage cameras designed for the manual focus had in the past. Some people change to one-third of frosted glass to add functionality to support manual focus (split finder image, micro diaprisms, for example). However this requires careful work to install the screen and the display of different can affect precision measurement of the camera, especially in the incorrect Spot metering.

  Addition of a lower 1.4 X teleconverter makes your lens in effect 112-280mm f5.6, who will still be updated with auto focus and will be much less loss of image quality, but not as much 'reach. If yours is a goal IS, it can reasonably be handholdable. If it is not a goal IS, you will need to watch your shutter speeds than blur carefully, probably should keep to 1/500 or more quickly to avoid the camera. Or use a tripod, as suggested by ebibgs, or at least a monopod. You also need to limit the autofocus on your camera to the central AF point only, I think.

  ebiggs1 wrote:

  On your camera, the 70-200mm f4 is like a 112-320mm f4.  With a converter 1. 4 x, looking at 448mm f5.6 and th elong end.  + 400 mm should be long enough for you to get photos of some birds.  BTW, use a tripod.

  While it is technically correct, citing the "crop camera lens factor" in this way may not help much, can be confusing.

  The original poster has simply a 70-200mm lens which they are accustomed to using on a crop sensor camera. They would now like to double the range of this lens on their camera. Crop sensor lens incorporating conversation factor is very useful when the user goes from frame of film/full to reframe the camera or vice versa. For someone who has never used a film camera or has not used one for many years and is now completely accustomed to how behaves a lens of focal length on their device to harvest, it is a completely moot point.

  But what he's basically saying that while you can add a 2 X, it is probably not a good idea for several reasons. Auto focus will work or not, with a few tips, won't work only weakly. Manual focus will be difficult. And the picture quality might take too big a hit, combining a 2 X with your goal. .

  I have a 70-200/4 IS, 70-200/2.8 IS ("Mark I"), 1. 4 X II and 2 X Teleconverters II. I also have long telephoto lenses, so rarely need to add these zooms teleconverter. However if necessary I would use 1.4 X on one of them. But even if AF still work on the 70-200/2.8 + 2 X combo, I won't use it because of the amount of loss of image quality (the most recent IS of 70 - 200/2.8 Mark II and 2 X Mark III are supposed to work together better, than my older versions of each).

  I use mostly 2 X on 300/2.8 and 500/4 lenses privileged where the image quality is still good. (Note: Yes, on some of my cameras 2 X 500/4 causes AF to stop working, as it would on your f4 lens, so I only use the combo on a limited basis.)

  mithun_pal129... I would say the more you get a 1. 4 X and use it with your goal. See if the image quality is to your expectations. Then work to get closer to your subjects. Or bring them closer to you. Practice the techniques of stalking and to study the behaviors of your subjects to discover ways to get closer. Work in a blind and use bait (food, calls). And start saving for a lens of longer focal length.

  The Canon 1.4 X II and III teleconverters are excellent. All Canon teleconverters have mated before elements that limit the lenses that they physically can be attached, but the 70-200 are among those where this is possible. Teleconverter Kenko is another that I see quite often recommended. They have two different levels of quality: a more expensive "Pro 300" version and a cheaper "MC - 4". These are currently offered in versions "DGX" whose operation is very similar to Canon teleconverters. Old Kenko teleconverters "DG" not "reported" to the camera, the camera didn't know they were there, so try to focus.  In the view of users and tests I've seen, the current Kenko Pro 300 DGX is pretty good overall of the entire image area. The MC - 4 cheaper is actually a little sharper in the Center, but not as strong in the corners and the edges of the image. Tamron and Sigma teleconverters also do, but I have little experience or knowledge of the current versions of the people.

  The wildlife/bird photography is not easy. Since no matter how long a goal that you have, there are times when the subjects are just out of reach and all you can go is to sit back and enjoy the show.

  These photos of small subjects with different, but close to or less than the effective focal length even lenses like your 70-200 mm + a 1. 4 X teleconverter would be on your camera...

  

  

  

  

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• Correction for Canon EF-S 18-135 IS USM lens

  Correction data for the Canon EF-S 18-135 IS USM lens could there be in Lightroom? I see not listed in my installation, but there may be an update that I can get to add it or I can manually download it somewhere? If not, anyone know when I can expect it to be available? The lens has been out for a few months now.

  Hi mithunc,

  Feierwoon is correct, as the list of lenses supported by this profile is not yet included. But, you can try using Adobe Lens profile downloader and download the profile created and presented by the community of users.

  Kind regards

  Assani

• Since update 10.0.2 at 6s "trash all ' in the Inbox.

  Since I did the update (10.0.2) I can no longer just "trash all ' mail inbox (Verizon).  Because I get emails 300 + a day, I need to be able to empty my Inbox easily without deleting all of them individually.  It is very irritating and time consuming.

  Anyway around this?  Thank you...

  sharikay wrote:

  Anyway around this?  Thank you...

  Not at the moment. Tell Apple you want to come back.

  http://www.Apple.com/feedback/iPhone.html

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Problem after update 10.0.2 iOS iPhone touchscreen

  After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
  For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

  Do what idea of the problem?

  Kind regards!

  Hi fabriciorela,

  Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• I can't go to my bookmarks after update for Sierra

  I have a MacBook Pro. I just updated this week to Sierra with no problems, but now when I click on multiple points in the upper left corner to reveal my favorites and my playlist only, it displays the top sites page and does not open my favorites and reading list, as it used to.

  Can someone tell me how to access my bookmarks and playlist in the Sierra? I'm sure it's something in the settings or something escapes me. My Bookmark Bar is the top of the page, yet. I can't find my bookmarks and reading list.

  Thank you

  I thought about it, I had to go to Favorites on top and tell Safari to display in the Sidebar again.

• Calendar Apple App Bug frozen works only with iOS 10 update grrr

  Since I updated to iOS 10 (more more later than 10.2, etc.), everything was not too bad except THE APPLE CALENDAR app, its deiving me crazy when I click on the app it's like it freezes and past shift x 50 mode still something to do with the calendar app will cause either a frozen or a black screen or white and then crashed ack to main menu. Sometimes it will allow me to create but will be trolling with typing and finally crashed or not even save it... Please HELP I am sure what else to do, I tried to download google calendar and which seemed to have something of bug he loves too then something happens. And I tried to delete it and download it again, / force delivery, nothing has changed

  Hi there calsparks!

  Thank you for bringing your question on the calendar of freezing and trolling since the update to iOS 10 on your iPhone for Apple Support communities.  I rely on the calendar to keep my life organized, so I'm happy to help you resolve this issue today.

  Looks like you did a few good troubleshooting by force to leave the app, force to restart the iPhone and deleting and reinstalling the application calendar.  At this stage my next recommendation would be to backup your iPhone, then erase and restore your iPhone as a new device, then test calendar to see if it behaves correctly, and then restore your backup.
  

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• new iPhone update

  I have an iPhone 5 and will probably get an iPhone 6s with a new SIM from nano.

  My photos will remain on my iPhone 5 until I save them?  I don't want to put my new sim card in the iPhone 6 and then the old sim become inactive and lose my photos if that makes sense?

  Thank you

  Hello

  IPhone 5 should run ios 10.2 if not go to settings - about us - software update

  Do update on your WiFi.

  Then go to settings - iCloud backup now.

  The new iPhone set up on your WiFi when you are asked if you want to use iCloud backup say Yes.

  Use the same identifier apple then you will get all the apps / photos on the new iPhone.

  See you soon

  Brian

• How to solve printing problems after update OS Sierra

  After the OS Sierra update, some of my files can not print from my printer. The message showed "internal error - an untrapped exception was raised. Choose 'continue' to continue execution in an inconsistent state. Choose 'Crash' to terminate the application and fill out a bug with Crash Reporter report. Choose 'Crash' will result in the loss of unsaved data. "Despite having chosen the above options, there is still nothing happen on the computer.

  Is there a way to fix this?

  Install a printer driver updated - check the site of the manufacturer for compatible drivers Sierra thew.