Update problem 6.70 BIOS with Satellite Pro C850-172

Similar Questions

• Cannot install the update of video player on three Satellite Pro C850

  I have 3 Satellite Pro C850-A-10Z, A - 15V and A - 15 q
  They are all running Windows 7 64 bit

  They have all the Tempro messages recently received on an update of the video player
  Toshiba service Center detects an update, but it will not install on any of them - no error message given.

  I tried to install it manually by following the link Tempro and download
  11/02/15 5.3.49.124 video player

  The update runs, and then displays the message
  "cannot find our player in your system. Installation interrupted.

  I thought that the Toshiba service center was supposed to report updates.
  Nobody knows what could happen here?

  Hello

  Are all the three machines pre-installed with the original version of operating system that has been delivered with the machine?

• I can't access all the settings BIOS with Satellite Pro M10

  Hello, I have a little problem with my satellite pro m10.
  When I press the button 'on', I see the toshiba logo. (normal)
  I want to get into the bios, I push the button "esc". Now, I see the message "check system. Then press [F1]. So, I push the F1 button.
  Now I can see "password ='"
  I push the button directly enter, and I have access to the bios. But my problem is that I can only change the date/time, password and the hard drive password.
  I can't access to other environments, such as boot priority, show, another.

  In the beginning, I think it's the fault of password, but I try to change it and I have no results.

  Please help me.
  Kind regards

  Hello

  What happens when you remove the BIOS password?
  Have you tested it? If this is not the case, check it.

• Satellite Pro C850 Wi - Fi lost after updating BIOS

  Today I received the notification of an update of the bios,

  I completed the update of the bios, but when the laptop restarts I had lost the Wi - Fi connectivity and now cannot connect via Ethernet.

  I looked online for answers, but the links I presented m with doesn't seem to work.

  I think I need to restore the bios to the previous version but can t find what to do.

  I have a Satellite Pro C850 - 14 c

  Will you please help if you can because it's ridiculous for Toshiba released a update that actually loses some of the functions to portable computers, especially the main function of a laptop that is portability.

  Thanks in advance

  What do you mean with lost?
  You can enable and disable the wireless network card?

• Updating BIOS for Satellite Pro S300

  Hello

  An update of the BIOS for Satellite Pro S300 series, even if there is no change log so there not sure it will set.

  Down here at Toshiba

  Concerning

  Phil

  Hello!

  Thanks for this info :)

  I have never seen anyone from Toshiba but maybe they only read here.
  I don't know, sorry.

  Good bye

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite Pro C850 - 1 H 8 - upgrade the BIOS CPU support

  Hi there are people.

  I'm wandering if there is a possibility of upgrade of the i5 3230 m which is currently in my Satellite Pro C850 - 1 H 8.

  Looking at the options available in the decision-making FCPGA988 and chipset Intel HM70 there seems to be a variety of the i7 available for use.

  The laptop supports processors with a TDP plu max than 35w?
  The bios supports all the CPU upgrade options?

  Cheers, Nick

  In this forum, you will find various discussions on the theme of CPU upgrade.
  I found this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=75073

  Paolo and Macius posted some information about the situation of CPU upgrade.
  As you can read in another thread, the CPU upgrade isn't supported. Updates can be made at your own risk, and no one can say if CPU supported by the chipset would be supported by the BIOS.
  Test it if you want, but it's at your own risk.

• Satellite Pro C850 - 1 M - update to Win 8.1 fails - error 0xC1900101 - 0 x 30018

  Hi all

  bought a new satellite Pro C850-1MX (PSCBZE 00M009GR) in December 2013. System works virtually unchanged to the State of delivery. Yet installed OpenOffice and Firefox, AdobeReader in most actual versions. And a updated driver for AMD GPUS to the latest version. No other changes made.

  Now I tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  Searched internet solutions: Toshiba ISC
  -updated all the components Toshiba via TOSHIBA Service Station--> fact
  -(Lien: [http://www.toshiba.de/innovation/generic/windows8_1-upgrade-stepbystep/]): uninstall some components: esp. LAN/WLAN-driver.

  Hmmm... If I do I can't access to Windows App-Store to re-run the upgrade because I have no connection to the network. Stupid...

  -Why I'm updating a nearly unchanged system due to some driver-inflicted where I has not changed anything of the delivery status of can´t?

  Please indicate any tip/solution. Thank you!
  Mark

  > Now tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  This error message appears because of some incompatible drivers and tools that are already pre-installed on Windows 8.

  This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014
  Look in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

  Check that drivers must be uninstalled in Appendix a.
  [How update of Windows 8 for Windows 8.1 | http://support.toshiba.com/sscontent?contentId=4003162]

  + What is important to remove the internet connection. +
  + Only use to download 8.1 and then disconnect (also the Lan cable) +.
  + After Win start 8.1 for the first time do not connect to the internet. +

  + On another pc download first for 8.1 audio, realtek wlan and bluetooth drivers and driver display. +
  + Install and reboot after that when system is stable, you can connect to the internet and download the updates of windows. +

  PS: this thread should be closed to avoid the misunderstandings and because the other thread already exists

• Update graphics on Satellite Pro C850-1EQ

  If I buy the Satellite Pro C850-1EQ with Intel HD Graphics 4000 - how easy/possible change is for a dedicated at a later date if graphics card I want better graphics performance?

  Thank you

  At first, I must say that it is not logical for me. If you want to have the laptop with good graphics performance buy new notebook with a powerful GPU inside.

  General GPU Exchange/upgrade is not supported and more info about what you read on http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
  Check it out.

• Satellite Pro C850-15 q - failed to connect to projector

  Hello world

  I'm unable to connect a Toshiba Satellite Pro C850-15 q Part No.: PSKC9E-01JOOHEN to a projector, laptop computer does not wish to duplicate the screen for the projector.

  The laptop worked without any problem with a spotlight for months, but its only today that it is unable to connect to a projector via a VGA cable.

  So far, I have tried to use the laptop on different different projectors, but will not work on any.
  I have used different VGA cables, uninstalled the driver display and then reinstalled the latest driver, updated chipset and bios but nothing seems to work.

  Physically, the VGA port seems fine, I tried to project using FN + F4 and the windows key + P, the two options do not work. I have also a right-click on the desktop, properties, all the eyes of correct parameters, also sought to graphics options right click again this sounds all very well.

  The laptop is running windows 7 32 bit.

  Suggestions as to what to try next?

  Thank you
  Darren.

  Hello

  What exactly happens when you press Fn + F4 (or only F4)?
  Other function keys work correctly?

  The laptop seems to also support the exit HDMI port.
  Are you able to connect the laptop to an external monitor and the output video using the F4 function key?

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.

• Activation questions Win 8.1 on Satellite Pro C850-1EQ after upgrade

  Hello everyone!

  I face a problem after the upgrade of my TOSHIBA SATELLITE PRO C850-1EQ preinstalled version of windows 8 to 8.1.

  After installation windows ask the product key to activate windows 8.1, but I don't have this activation key.

  I called Microsoft (Greece), but could not help me and told me to call Toshiba (Greece).
  The man of Toshiba technical support told me to remind Microsoft!

  In addition, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before starting the process. Step # 7 says "don't forget your Windows password. You may need to enter after update. »

  Now, I'm back to Win 8.

  Is there a way to learn my activation key before installation of w8.1?
  I tried to find that the use of various tools, but nobody found the key.
  In addition, after 8.1 install, a message says:

  + Error code: 0xC004C003 +.
  + The activation server determined the specified product key has been blocked.

  I trust Toshiba and I want to use the latest version of w8.1.
  I'd be grateful if someone Toshiba technician could help me with this problem.

  John (from Greece)

  Hello

  > I'd be grateful if someone technician Toshiba could help me with this problem.
  It's community of users

  > Is it possible to learn my activation key before installation of w8.1?

  No, the preinstalled Windows 8 Toshiba is already activated and during the upgrade to 8.1 Win will not ask you to enter the serial key...

  Windows 8 is activated?

  Try this: create DVDs of Toshiba Recovery (or flash USB memory stick). Use the recovery media to recover the computer laptop back to factory settings. Update of the Windows 8 at the last State and then do the upgrade to 8.1 Win

• Windows 8 to 8.1 upgrade is not possible on Satellite Pro C850-1MX

  Hello Forum users,.

  Sorry for my bad English. I'll try my best ;-)

  I'm trying to upgrade Windows 8.0 8.1 on a Satellite Pro C850-1MX.

  Before that I removed:
  -Realtek Audio Driver
  -Realtek WLAN Driver
  -Bluetooth filter Driverpackage
  -Toshiba Health Monitor

  I also checked the notebook with the update of the Windows Advisor 8 / attend.

  Whenever I try the update is installed, the computer restarts and says while the previous version is restored because the update failed (0xC1900101 & 0 x 30018).

  I tried to restore the laptop to factory (using the recovery partition), deleted the drivers, tried again. Same failure.

  Where is the problem?
  Someone at - it an idea?
  I Don t know what to do then.

  Thank you!!

  Thiemo

  Hello

  Upgrade the win 8 to 8.1 win, to follow some step by step instructions:
  This can be found here: [how update of Windows 8 for Windows 8.1 | http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/]

  Note: after installing Windows 8.1 drivers Toshiba and tools needs to be updated in the correct order.
  The Win 8.1 driver installation instruction can be found on the page of the Toshiba UE driver you laptop model section.

• Satellite Pro C850-1FN stucks in the form of preparation of auto repair

  Hello

  I have a Satellite Pro C850 1FN and for some reason it stuck in a display of automatic preparation for startup repair. He will be sitting with the text on the screen, and after 8 minutes bluescreen shows then talk about a problem and then re boot PC.

  The cycle then continues.

  Any ideas greatly appreciated.

  Hello

  It looks like the repair automatic isn t possible.
  Have you tried another HARD drive recovery option?

  The HARD drive recovery process would begin the new system, but also the driver installation and would set the laptop back to factory settings.

  I think that if the system repair isn't possible, your next step should be the HARD drive recovery.
  In case the recovery of HARD drive would not work too, then you should use the recovery disc.