Update proposed on several occasions.

Similar Questions

• Same update proposed on several occasions.

  I get I need to update each time I have scan for the update. Which after I installed those to date a bunch of times in the past six months is something I can do to fix this?

  http://support.Microsoft.com/kb/910339/en-us

  Windows Update or Microsoft Update repeatedly offers the same update

  You can also check your update history to see if there are any error messages. Then, you can search for all the mistakes you can find by going to the following Microsoft Web site:

  http://support.Microsoft.com

           

  Use the following steps to check your update history.

  For Windows 7, Windows Vista and Windows XP

  1. Start Windows Update. To do this, click Start, type Update in the search box, and then in the list of results, click Windows Update.
  2. In the navigation pane, click view update history.
  3. Click status to sort by State and then find the updates that have a status of 'Impossible '.
  4. Click right an update which has "Failed" status and then select show details. The window that opens displays the error code for this update.

• An update is under windows is installed on several occasions

  Original title: update kb261845

  It keeps the installation on Windows XP with sp3

  kb261845 updates

   

  Hello

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

   

  An update is installed on several occasions.

   

  The problem may occur if the updated components are corrupt or due to malicious content.

   

  What is the full update number?

   

  I suggest you follow the steps mentioned below:

   

  Method 1: Reset the update components

   

  See the site:

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

   

  Method 2:

   

  Step 1: Check if the update is installed

   

  a. go to the menu and start at the bottom left.

  b. Select Control Panel from the menu.

  c. find the icon Add / Remove programs and double-click it to open it.

  d. a list of installed programs. To see Windows updates put a check mark in the Show updatescheck box.

  e. now, you will see also all the updates that are on your computer.

   

  Step 2:

  a. If the update is not installed, then check the steps in the site:     

   

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

   

  Note: To put the computer back to start normally after solving problems by clean restart, use the procedure in steps to configure Windows to use a Normal startup state in the same page.

   

  b. If the update has been installed, then scan the computer for malicious content:     

  Analyze the computer to remove all possible malicious content.

   

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

   

   

   

   

   

• Flash player installs on several occasions without permission

  I have several times uninstall the Plugin Adobe Flash Player 12 and ActiveX Adobe Flash Player 12. These two settle on several occasions without permission. In Options > Options > advanced > updates, I have the option "check for updates but let me choose whether to install" checked, and it has been like that for weeks. I work from home and I'm on the net all sources of new aggregation day and without flash I don't get bombarded with ads flash constants and sudden noises, loud. However, these two will settle at least twice a day, forcing me to uninstall them manually every time.

  Cannot install plugins in Firefox. Plugins are software, like Firefox itself. They can only be installed by running the Setup program (.exe file).

  Flash Player is required to browse some sites, so it is safer to disable rather than uninstall it. To do so,

  1. Press Ctrl + Shift + A to open the Add-ons Manager.
  2. Click on Plugins on the left.
  3. On the right, the Shockwave Flash value "never enable" to turn it off completely. You can also set it to "Ask to activate" to be invited to start when you browse a site that has Flash content.
  • Management and uninstall plug-ins | Support for Mozilla

  If you insist to get rid of the Flash Player, there is an uninstall program that you can download to get rid of all installed versions. See the following page.

  • Uninstall Flash Player for Windows | Adobe support

• I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me

  I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me to solve the problem.

  as I know he never was a 5.5 ps, but something more old ps cs2 (version 9) is not likely to work on any modern operating system.

  You can use your old computer with them or try and install using compatibility mode or consider an updated version of the ps ($ 10 / month for lr and ps is the plan more economic that includes ps), plans, pricing and membership creative cloud | Adobe Creative Cloud

• My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.

  My system (Vista 32-bit SP2) tried to install update KB980248 for several weeks, but I keep getting error code 80073712.  I tried to follow the directions on the site by running the system preparation tool update... did not work.  Then I tried to go back to a restore point and try the update again.  Yet once, didn't. I went back several restore points, but it has always failed.  I don't have an installation DVD, because it came with Vista preloaded.

  Help?

  PaulS22401,
  Walk through the steps described in this article: http://support.microsoft.com/kb/957310

  Let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update of Windows Vista Ultimate. SP1 update is offered several times.

  SP1 update is offered several times. Specified installation as successful but is not installed. Set the program claims to repair components updated but does not.

  No error message was displayed.

  I have now manually installed SP1 & SP2 and the case seems to be resolved.

  Thank you very much.

• I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months. But since August the year last, I am facing problem and my device hung on several occasions.

  Dear Sir, almost a year I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months, I go to 8.1 and it worked very well. But since August the year last, I am facing problem and my device hung on several occasions. I restored the device, I tried to restored on the plant but no help. Is it possible if I replace win 8 for windows 7 because I feel very uncomfortable.

  Thanks & best regards,

  Hassan jamal Shah

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Update stmt take several hours to get updated about half million records in a Table

  Hello

  Target WC_PROCUREMENT_FS table contains about 1.3 million records and under post ETL to update stmt take several hours to update the table. I think that 3rd stmt with XX_PROCUREMENT_BI package with the function 'GET_EXCHANGE_RATE' is time consuming. Please suggest if there is a way to improve performance.

  UPDATE WC_PROCUREMENT_FS OP

  The VALUE of OP. RELEASE_AMT_FN_CCY = (SELECT SUM (OP1. PO_AMOUNT_FN_CCY) OF WC_PROCUREMENT_FS OP1

  WHERE OP1. SUBJECT_CODE IN ("PO")

  AND OP1. TYPE NO ('CONTRACT', 'COVER')

  AND OP1. TRANSACTION_LINE! = "NA".

  AND OP1. PO_REFERENCE_NO = OP. TRANSACTION_NO)

  Op. RELEASE_AMT_GBL_CCY = (SELECT SUM (OP1. PO_AMOUNT_GBL_CCY) OF WC_PROCUREMENT_FS OP1

  WHERE OP1. SUBJECT_CODE IN ("PO")

  AND OP1. TYPE NO ('CONTRACT', 'COVER')

  AND OP1. TRANSACTION_LINE! = "NA".

  AND OP1. PO_REFERENCE_NO = OP. TRANSACTION_NO)

  Op. RELEASE_AMT_TRN_CCY = (SELECT SUM (ROUND (DECODE (OP. TRN_CCY, OP1. TRN_CCY, OP1. PO_AMOUNT_TRN_CCY, OP1. PO_AMOUNT_FN_CCY * nvl

  (XX_PROCUREMENT_BI. GET_EXCHANGE_RATE (OP1. FN_CCY, OP. ((TRN_CCY, 'Corporate', OP.GL_DATE), 1)), 2))

  OF WC_PROCUREMENT_FS OP1

  WHERE OP1. SUBJECT_CODE IN ("PO")

  AND OP1. TYPE NO ('CONTRACT', 'COVER')

  AND OP1. TRANSACTION_LINE! = "NA".

  AND OP1. PO_REFERENCE_NO = OP. TRANSACTION_NO)

  WHERE OP. SUBJECT_CODE IN ("PO")

  AND OP. TYPE ('CONTRACT', 'COVER')

  AND OP. TRANSACTION_LINE = "NA";

  
  Thank you for your help.

  Thank you

  Jay.

  Hi Jay,.

  Try this.

  MERGE IN wc_procurement_fs op

  USING (SELECT op1.po_reference_no, SUM (op1.po_amount_fn_ccy) c1,

  SUM (op1.po_amount_gbl_ccy) c2,

  SUM

  (ROUND

  (DECODE

  (op.trn_ccy,

  OP1.trn_ccy, op1.po_amount_trn_ccy,

  OP1.po_amount_fn_ccy

  * NVL

  (xx_procurement_bi.get_exchange_rate

  (op1.fn_ccy,

  op.trn_ccy,

  "Corporate."

  op.gl_date

  ),

  1

  )

  ),

  2

  )

  ) c3

  OF wc_procurement_fs op1

  WHERE op1.subject_code IN ("PO")

  AND op1. TYPE NO ('CONTRACT', 'COVER')

  AND op1.transaction_line! = "NA".

  GROUP BY op1.po_reference_no) CBC

  WE (op1.po_reference_no = op.transaction_no)

  WHEN MATCHED THEN

  UPDATE

  SET op.release_amt_fn_ccy = src.c1, op.release_amt_gbl_ccy = src.c2,

  op.release_amt_trn_ccy = src.c3

  ;

• I have a MacPro. Recently, my computer was wiped out. I lost all my software. I bought CS2 years ago. I've updated by buying CS5 a few years later. My CS software is automatically updated by Adobe several months ago. Now, when I need to reinstall/downloa

  I have a MacPro. Recently, my computer was wiped out. I lost all my software. I bought CS2 years ago. I've updated by buying CS5 a few years later. My CS software is automatically updated by Adobe several months ago. Now, when I need to reinstall my software I can not do. I need to reinstall CS2 before I reinstall my CS5 update. However, my computer accepts no more CS2 software. How can I return my software?

  I need to reinstall CS2 before I reinstall my CS5 update.

  It is not necessary. You need only to re - install the latest version you have (full version or upgrade - all versions include the complete program code, it is the serial number that distinguishes plenty of upgrade)-even on a machine that has never had any installed Adobe software.

  The installation program will ask you to enter the serial number from a previous version to verify that you qualify to use the upgrade.

  Which is the last version that you own? CS5 or CS6? You have all your serial numbers?

  You can download the latest version of download and Installation Help | Download and Installation Help

  Install and enter your serial number.

• I use Acrobat DC and I'm unable to open a PDF file on a Web site. Whenever I click the link it says that my drive is not updated. I've updated the player several times now and it always used open. Other documents open on this Web site.

  I use Acrobat DC and I'm unable to open a PDF file on a Web site. Whenever I click the link it says that my drive is not updated. I've updated the player several times now and it always used open. Other documents open on this Web site. http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf

  Hi kimberlys49504344,

  It is an XFA file that is not detected by the PDF viewers in the web browser.

  Please right click on this link http://www.cic.gc.ca/english/pdf/kits/forms/IMM1344E.pdf & select ' Save As... ', now, to save the PDF file to your desktop & open with Adobe Reader.

  I'm sure that it will work as it worked on my end.

  Kind regards

  Nicos

• How can I allow users of CS update metadata on several items? (gR 10, 3 of the Complutense University of MADRID)

  In the 10gR 3 AAU portal user interface:
  
  It is convenient to allow us users to update fields of metadata on a group of items in a single action. We want to allow users to select any number of files of results of a search of CS.
  
  After selecting the items, we want users to be able to define new values for some fields (for example the security group and the Document Type) without touching the values of other fields of metadata (such as author).
  
  This seems to be a pretty basic feature, but we can't seem to find in the user interface of CS. What is the best way to do this in the user interface of CS?
  
  Thank you!

  Hello

  There is a custom component, component MassMetaData, which can be used for this specific feature. I've seen some users use it to update metadata on several items in one fell swoop.
  Maybe some of the consultants can be contacted to get their hands on this component.

  Thank you
  Srinath

• Updates security offered at several occasions. - KB2604092 & KB2636927

  Original title: Windows security updates (* adds the title KB)

  In my history of update, it shows two updates have been installed successfully several times. They are:

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092), and
  Update of security for Microsoft Silverlight (KB2636927)
   
  But whenever I start my computer, the yellow shield appears and indicates that these updates are still required. When I turn off my computer, it installs them again.
   
  I don't know if in fact they were not installed but just to show that they have been installed in the history, or if they were really installed and for some reason any somewhere in the system, it is not this.
   
  Would appreciate any help I could get.
  Hello
   
  I suggest you to refer to the following Microsoft article and check if it helps.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update:
  http://support.Microsoft.com/kb/910339
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
   http://support.Microsoft.com/kb/322756
   
   

• On several occasions, Winows update updates but fails.

  Hello, my problem is that my drivers might be damaged I was fresh and reinstall several times and Windows Update indicates several times after I stop and start for the next session. However, I have read your responses to the problems and he was no help maybe it was but I do not think I have SP2 or SP3 installed on the computer and try to installed SP2 or SP3 computer so don't have it. I learn the computer and I loved but I did what is ask and he didn't mature.

  Hi Alex,

  Please answer these questions to better understand the issue.

  (1) Windows update are you trying to install?

  (2) are what Service Pack (SP2 & SP3) you referring?

  (3) what is the exact error you get when you try to install Windows Update?

  (4) you have any third-party security program installed on Windows 8?

  On Windows 8, you can upgrade to Windows 8.1, it not Service Pack 1, 2 or 3 as the previous version of Windows. Windows Update may not install because of the connection to the internet, or because of some third-party programs. Follow these methods and check if that helps.

  Method 1: Follow the steps in the troubleshooting section of Microsoft. You might be able to fix some problems automatically by running the Windows Update Troubleshooter:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-8/troubleshoot-problems-installing-updates

  Method 2: I suggest you to reset the Windows Update components and check

  http://support.Microsoft.com/kb/971058/en-us

  Important Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Method 3: refer to this article and follow the steps only for Windows 8:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  
  

  http://support.Microsoft.com/kb/949358/en-us

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Whenever I sync my calendar on Lightning, I get a message "accept changes and update in any case" on several occasions, even though the event is deleted from the server

  This repetition of message every time I sync, therefore can freeze the Thunderbird application after 3-4 syncs

  Right-click recycle the message to the next synchronization
  Left button instantly recycle the message

  Event deleted on the server, lightning and by Organizer

  Disable Google provider problem ceases, but which makes unnecessary lightning

  TBird reinstalled, updated all modules

  Tried to download the image, but no luck...

  I deleted the event to my calendar and was the Organizer to do the same thing.

  What Organizer?

  I have the latest updates from each of the three

  Once again, what are your versions of Thunderbird, Lightning and the provider add-on?

  and charging each of them...

  I mean you don't have to reinstall Thunderbird, then it was a waste of time.

  You can try to remove the calendar in lightning, restart Thunderbird, and then recreate the calendar.
  Given that the calendar is a calendar of network no data will be lost.

  That said, it is always recommended to have a recent backup of profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring