Update satellite 1005-S157
How can I improve it?
Hello
Your question is very short.
I can't find much information on this laptop. I only know that it has been delivered with the 1.06 Intel Celeron CPU 256 MB of ram and 15 GB drive HARD IDE.
Usually, you can improve memory or / and HARD drive on laptop computers. It is not possible to upgrade the processor or graphics card.
I guess the Toshiba service partner should know more about compatible parts.
If you want to buy some parts supported, you should contact this people.
Tags: Toshiba
Similar Questions
-
Satellite 1005: Push the power button, will turn off the AC power.
Laptop: Toshiba Satellite 1005
Problem: When I press the power button and let go, the laptop immediately loses all power.
I use the power cord plugged into the laptop, the power supply light is green, but when I press the power button and let go, as soon as the power light goes black(turns off), nothing happens.
Howerver, if I PRESS the power button without letting go, power LED lights, but the laptop won't boot at all, no Startup logo, no sound no matter what.
It's the second time this has happened, the first time, I let stand overnight and the next day she booted up fine.
Currently, the laptop is cold, it did not work, but always the same thing as described above.
There are no changes made to the laptop.
Any ideas?
It seems that the contact, the power button is faulty. Better to elevate the laptop to a Toshiba service station for a check.
I n ' t´t think that it is a software failure.
Good bye
-
Update Satellite Pro 420 CDT to Windows 98
I have an old 420CDT Satellite Pro I want to test my wireless router. It was delivered pre-loaded with Windows 95, but I need to upgrade to Windows 98 minimum.
When I run the installer of Windows 98 (upgrade mode) he told me that I should update the Toshiba utility before you continue. However, I can't locate a Toshiba Utility for Windows 98. Someone can help me with this and will it put something else before proceeding?
Sorry, but this unit is not supported with W98 and you will not be able to find a correct driver or tool of Toshiba. Furthermore, I think you expect too much of this old unit which has just 100 MHz processor speed just a bit of RAM. I'm not sure that it can work properly.
Have you ever tried to connect wireless installation Toshiba tools?
-
After Bios Update satellite A10 had totally frozen and the display is blocked
Hello
Today, I tried to update my Bios of satellite A10 to 5.20.
I downloaded the unziped file and executed, as recommended in the instructions.
After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
How can I solve this problem?
Thank you very much in advance.Wait a moment you sure you used the right BIOS?
As you say, your laptop is that a Satellite A10 is good?I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!
Sorry to say but it seems that you used the wrong BIOS!
You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician
-
What type of RAM can I update satellite A60-108
Hello
Should what kind of RAM I update my Toshiba A60-108, PSA60E-03H0357Y?
I found very interesting site of memory:
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11565&ft=m&St=3Satellite A60-106 listed there, but I think it uses the same modules as the a60-108
According to this page, you can use PC2700 200 pin memory (333 Mhz) DDR SODIMM modules.As suggested, you can use a slot for an upgrade.
The laptop supports the 1536 MB max (about 1.5 GB) memory
In this case, you can use max 1 GB module. -
Updated satellite L40 - cannot install the VAP 1.2.40
I have a Satellite L40 running Windows 7 32 bit.
Just got an alert on Tempro (yet) asking me to install a new version of the * value added package * (PPV)
Version 1.2.40 apparently published on 21/09/2010.
Unzipped the download and again error _ * 0x8146045B * _ when I try to install.
Help! Someone at - he managed to install the package VAP with WIN 7?
Hello
Have you had problems with the previous version?
Isn't it? So why you want to update? Just because Tempro says there's a new update?In any case try to manually download the VAP.
means that you should visit Toshiba Europe page.
Save the PPV on the HARD drive and unzip it.
Uninstall the VAP old everything first, clean the registry with CCleaner.
Then try again to install VAP -
Updates satellite C850 stuck?
I bought the satellite C850 Saturday and when I stopped him last night he had a few updates to
He was murdered on 16 update of 39 since 10:30 last nightis this normal or is - it does not update properly?
Hello
You can stop the unit and can repeat the update again after the new reboot.
This should not be a big problem and serious -
SD-C2612 IDE #1 error after wrong firmware update - Satellite Pro A10
Hello
I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).I tried flashing with the right firmware (1315) but get the message to the Primary Master and Slave as "Not ATAPI Device" and "drive not connected".
NB: at the start, even with the deleted DVD ROM, I always get the #1 error IDE.
Update the bios to the latest version would help or is there all the options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?
Thanks in advance for any advice you can give.
Best regards
Angus> I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).
Lol :D I have don t wonder you get the IDE #1 error message.
As you say yourself, you have flashed the drive with the wrong firmware. This has damaged the master/slave/c-salt settings of readers and so the BIOS doesn't recognize the CD/DVD drive. But I wonder why someone flashing the drive with a bad firmware? :| We still know that a wrong firmware can damage the CD/DVD drive... and above all it is not necessary to update the firmware.> Update the bios to the latest version would help
The BISO update will not help you because you have already good BIOS and it s NOT a problem of BIOS, but the evil and not compatible firmware is stored.> or are there options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?
I'm don't know if this helps, but I know that it is not desirable because it may damage the material of CD/DVD playersI recommend you contact the ASP in your country guys might revive the CD/DVD drive. Let's hope
-
BIOS update - Satellite Pro A60
Am I blind or confused? I tried to find a update of the bios for a Satellite of A60 Pro on the site http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp
but the A60 is not listed as one of the portable series (100 120, 200 210 300 but not 60!). My laptop is still ongoing with the original bios and looking at the various articles on the net, there is an update of the bios there somewhere... but whereClues?
OK, I was confused... I had to look in the section archive. Instead of delete, thought I might leave this as helping others!
Paul
-
Problem update satellite M840 Windows 10 Bluttooth
I can't switch to windows 10 as Toshiba have done the Bluetooth driver that is compatible with windows 10. so please solve this problem that prevents the upgrade and support the Bluetooth driver.
Model: Satellite M-840
Part #: PSK9UV-01S00DAR* Copy of the attached error.
Thank youYour laptop model is supported for Win10?
Have you checked the list of all models of laptops? -
Updated satellite A20-S103 - CPU and RAM
I have toshiba satellite a20-s103 and I want to spend the cpu and ram.
I need more to upgrade the processor that the RAM, the socket is socket p, please if you find any compatible cpu or ram from e - bay or if you find elsewhere, new cpu, or second hand in a good situation, please report it!
and please tell me if intel core 2 duo or quad is compatible
If you find the intel core 2 quad or compatible with that laptop duo, please report!Thank you very much!!!
Guess what buddy.
Forget the CPU upgrade!It is a very old notebook support old chipset.
I'm quite sure that the chipset would not support Intel Core CPU m.In addition, the memory can be improved up to 1 GB of RAM (2 x 512 MB)
More is not possible.In my opinion, if you need more performance, buy a laptop (maybe good work 2nd unit) supporting the newer parts.
-
Problem update satellite P10 554 to XP Pro
Hello
got the P10 554, with Windows XP Home Edition. Since I have my own copy of XP Pro and need additional components, which are NOT part of the home ed., I tried to update.
Works fine until the point where it says "Starting Windows". The progress bar runs out, the screen goes black and not more disk access hard and CD.
Everyone runs into that as well, or is there a solution for this problem?
Thanks in advance,
JürgenHi, tried to run Windows in Mode safe?
Good bye
-
Update satellite M60-132 with more RAM
Hello
In order to run Windows Vista on my M60 - 132 I am advised to spend at least 1 GB or 2 GB of RAM, but I don't know exactly what kind of RAM to buy. Could someone advise me please on this issue?
Thanks in advance!
Kind regards
ThomasSatellite M60 Series supports the simple DDR2 533 MHz PC2-4200 barrettes.
Each laptop or merchant to sell these modules.As far as I know Toshiba recommend using own modules due to compatibility issues.
I found this number on the options and accessories site:
DDR2 400/533 256 MB (PA3389U - 1 M 25)
512 MB DDR2-400/533 (PA3412U - 1 M 51)
1 GB OF DDR2 400/533 (PA3411U-1M1G) -
Satellite 105-S157: USB 2.0 via a PCMCIA card does not work
I installed the pcmcia card with BIOS update V2.1 and work under WIN XP sp2.
It seems to work normally in Device Manager, but when I plugged in the USB, it may not recognise.
If I can access usb PCMCIA ports.This laptop does support USB 2.0?
How can I make it work?Please help?
Thank you
Hello
It is a brand new model Toshiba and I guess that it supports high speed USB 2.0.
Sometimes, the operating system can not recognize external USB devices due to the limitation of power. The fact is that the USB port gives the 500mA. It is a standard value.
If the USB device use a higher power, the OS cannot recognize and activated the device.
In this case the external power supply is necessary. Another possibility is to use the USB hub with an external power supply. -
Update satellite P855 and Win8.1 - ERROR mfewfpk.sys
Hello
I had my Satellite P855 - 10G upgrade Windows 8.1 for Windows Store. Currently, it cannot open a session, pops up an error "SYSTEM_SERVICE_EXCEPTION (mfewfpk.sys).
Can someone help me please? = SJust a question at the beginning: you have upgraded your operating system following the advice on http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/?
Maybe you are looking for
-
When I boot back into OS X El Capitan, I can see screen burn-in remains of my Windows 10 homescreen. My screen on Windows 10 resolution is located at 2560 x 1440 (recommended). Graphics card Specifications: iMac specs: iMac (27-inch, late 2012) Intel
-
Hello How are you? I am new to the community. I am facing a problem with my laptop Lenovo G 500. The memory is as follows: When it is plugged in, the battery light is on (white color). But when I press the power on button/recover button, the power le
-
locked mi computadora esta no me already entrar Internet if alguien me can help
mi computadora esta locked I don't dice that are a firewall as puedo hacer problema if no entrar medeja has internet y nada
-
Pavilion dv4-2140us: my flag has no sound
ithasnosoundatall.tried by pressing the "speaker" icon but no chance to ortapping
-
Online symbol does not show in the bottom bar of my computer. How can I show him?
The symbol that tells you your online status ceased to appear when I connect. It is located in the lower right corner next to the time.