Update satellite 1625CDT

Similar Questions

• Satellite 1625CDT: black screen

  OK, I have a toshiba satellite 1625CDT, which is mainly used for writing. I turned it on this morning and the screen was completely black. He did the normal beep sound this start-up and was the sound of windows. Yet, I don't see anything. It also works with the external monitor.

  After playing with the resolution and brightness controls (thinking that might have the problem), there was nothing. Also, it is not at a point where I can barely see it. Even after shining a flashlight on the subject, it is completely black (thinking it may have been a bad inverter, but usually when the inverter goes bad, you can barely see anything)

  Anyone know what the problem is for this?

  Hello

  As you know on this path, it's really not easy to say what can be the problem and in this case, we can only speculate on this. From your description, I assume that the display is faulty and must be replaced.

  If you can t even see the home screen Toshiba I really believe that the display is dead.

• Updating BIOS for Satellite 1625CDT with XP Pro

  OK, I bought a new 256 MB of ram, when tried install it requested update of the bios. I find the update of the correct bios for her. When I try to update the bios, it is said that it can be run in 98 and 2000, I have xp pro. I also tried to start exploitation f12, it did nothing but initialize and beep at me a lot.

  How can I update the bios without having to install a new os (especially when i cannot reinstall pro because of no installation disc or recovery)

  Help, please

  Hello

  I checked the page of the Toshiba driver and there is a single place BIOS:
  This is version 1.11 of the 18/11/02.
  Have you verified that the BIOS Toshiba upgrade document?
  Please check. You will find this under the FAQ section on the support page.
  You will find the proper procedure the update of the BIOS.
  As far as I know, is a procedure to upgrade the BIOS 6.

  But I don't know if the upgrade of the BIOS allows you to use a memory of 256 MB.
  I found some information that this device can handle only modules memory 32 MB, 64 MB, 128 MB and max 160 MB memory.
  In this case you cannot use the module memory 256 MB

• Update Satellite Pro 420 CDT to Windows 98

  I have an old 420CDT Satellite Pro I want to test my wireless router. It was delivered pre-loaded with Windows 95, but I need to upgrade to Windows 98 minimum.

  When I run the installer of Windows 98 (upgrade mode) he told me that I should update the Toshiba utility before you continue. However, I can't locate a Toshiba Utility for Windows 98. Someone can help me with this and will it put something else before proceeding?

  Sorry, but this unit is not supported with W98 and you will not be able to find a correct driver or tool of Toshiba. Furthermore, I think you expect too much of this old unit which has just 100 MHz processor speed just a bit of RAM. I'm not sure that it can work properly.

  Have you ever tried to connect wireless installation Toshiba tools?

• After Bios Update satellite A10 had totally frozen and the display is blocked

  Hello

  Today, I tried to update my Bios of satellite A10 to 5.20.
  I downloaded the unziped file and executed, as recommended in the instructions.
  After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
  How can I solve this problem?
  Thank you very much in advance.

  Wait a moment you sure you used the right BIOS?
  As you say, your laptop is that a Satellite A10 is good?

  I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

  Sorry to say but it seems that you used the wrong BIOS!
  You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

  I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

• What type of RAM can I update satellite A60-108

  Hello

  Should what kind of RAM I update my Toshiba A60-108, PSA60E-03H0357Y?

  I found very interesting site of memory:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=11565&ft=m&St=3

  Satellite A60-106 listed there, but I think it uses the same modules as the a60-108
  According to this page, you can use PC2700 200 pin memory (333 Mhz) DDR SODIMM modules.

  As suggested, you can use a slot for an upgrade.
  The laptop supports the 1536 MB max (about 1.5 GB) memory
  In this case, you can use max 1 GB module.

• Updated satellite L40 - cannot install the VAP 1.2.40

  I have a Satellite L40 running Windows 7 32 bit.

  Just got an alert on Tempro (yet) asking me to install a new version of the * value added package * (PPV)

  Version 1.2.40 apparently published on 21/09/2010.

  Unzipped the download and again error _ * 0x8146045B * _ when I try to install.

  Help! Someone at - he managed to install the package VAP with WIN 7?

  Hello

  Have you had problems with the previous version?
  Isn't it? So why you want to update? Just because Tempro says there's a new update?

  In any case try to manually download the VAP.
  means that you should visit Toshiba Europe page.
  Save the PPV on the HARD drive and unzip it.
  Uninstall the VAP old everything first, clean the registry with CCleaner.
  Then try again to install VAP

• Updates satellite C850 stuck?

  I bought the satellite C850 Saturday and when I stopped him last night he had a few updates to
  He was murdered on 16 update of 39 since 10:30 last night

  is this normal or is - it does not update properly?

  Hello

  You can stop the unit and can repeat the update again after the new reboot.
  This should not be a big problem and serious

• SD-C2612 IDE #1 error after wrong firmware update - Satellite Pro A10

  Hello
  I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  I tried flashing with the right firmware (1315) but get the message to the Primary Master and Slave as "Not ATAPI Device" and "drive not connected".

  NB: at the start, even with the deleted DVD ROM, I always get the #1 error IDE.

  Update the bios to the latest version would help or is there all the options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?

  Thanks in advance for any advice you can give.

  Best regards
  Angus

  > I have a Toshiba Satellite Pro A10, which was flashed with wrong firmware (I don't know which because I don't).

  Lol :D I have don t wonder you get the IDE #1 error message.
  As you say yourself, you have flashed the drive with the wrong firmware. This has damaged the master/slave/c-salt settings of readers and so the BIOS doesn't recognize the CD/DVD drive. But I wonder why someone flashing the drive with a bad firmware?  :| We still know that a wrong firmware can damage the CD/DVD drive... and above all it is not necessary to update the firmware.

  > Update the bios to the latest version would help
  The BISO update will not help you because you have already good BIOS and it s NOT a problem of BIOS, but the evil and not compatible firmware is stored.

  > or are there options open for me to solve this problem other than to have recourse to the connection of pin 47 & 45? Would it even solves?
  I'm don't know if this helps, but I know that it is not desirable because it may damage the material of CD/DVD players

  I recommend you contact the ASP in your country guys might revive the CD/DVD drive. Let's hope

• BIOS update - Satellite Pro A60

  Am I blind or confused? I tried to find a update of the bios for a Satellite of A60 Pro on the site http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp
  but the A60 is not listed as one of the portable series (100 120, 200 210 300 but not 60!). My laptop is still ongoing with the original bios and looking at the various articles on the net, there is an update of the bios there somewhere... but where

  Clues?

  OK, I was confused... I had to look in the section archive. Instead of delete, thought I might leave this as helping others!

  Paul

• Problem update satellite M840 Windows 10 Bluttooth

  I can't switch to windows 10 as Toshiba have done the Bluetooth driver that is compatible with windows 10. so please solve this problem that prevents the upgrade and support the Bluetooth driver.

  Model: Satellite M-840
  Part #: PSK9UV-01S00DAR

  * Copy of the attached error.
  Thank you

  Your laptop model is supported for Win10?
  Have you checked the list of all models of laptops?

  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Updated satellite A20-S103 - CPU and RAM

  I have toshiba satellite a20-s103 and I want to spend the cpu and ram.

  I need more to upgrade the processor that the RAM, the socket is socket p, please if you find any compatible cpu or ram from e - bay or if you find elsewhere, new cpu, or second hand in a good situation, please report it!

  and please tell me if intel core 2 duo or quad is compatible
  If you find the intel core 2 quad or compatible with that laptop duo, please report!

  Thank you very much!!!

  Guess what buddy.
  Forget the CPU upgrade!

  It is a very old notebook support old chipset.
  I'm quite sure that the chipset would not support Intel Core CPU m.

  In addition, the memory can be improved up to 1 GB of RAM (2 x 512 MB)
  More is not possible.

  In my opinion, if you need more performance, buy a laptop (maybe good work 2nd unit) supporting the newer parts.

• Problem update satellite P10 554 to XP Pro

  Hello

  got the P10 554, with Windows XP Home Edition. Since I have my own copy of XP Pro and need additional components, which are NOT part of the home ed., I tried to update.

  Works fine until the point where it says "Starting Windows". The progress bar runs out, the screen goes black and not more disk access hard and CD.

  Everyone runs into that as well, or is there a solution for this problem?

  Thanks in advance,
  Jürgen

  Hi, tried to run Windows in Mode safe?

  Good bye

• Update satellite M60-132 with more RAM

  Hello

  In order to run Windows Vista on my M60 - 132 I am advised to spend at least 1 GB or 2 GB of RAM, but I don't know exactly what kind of RAM to buy. Could someone advise me please on this issue?

  Thanks in advance!
  Kind regards
  Thomas

  Satellite M60 Series supports the simple DDR2 533 MHz PC2-4200 barrettes.
  Each laptop or merchant to sell these modules.

  As far as I know Toshiba recommend using own modules due to compatibility issues.
  I found this number on the options and accessories site:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Update satellite P855 and Win8.1 - ERROR mfewfpk.sys

  Hello
  I had my Satellite P855 - 10G upgrade Windows 8.1 for Windows Store. Currently, it cannot open a session, pops up an error "SYSTEM_SERVICE_EXCEPTION (mfewfpk.sys).
  Can someone help me please? = S

  Just a question at the beginning: you have upgraded your operating system following the advice on http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/?