Update the firmware to Mac to support AirPrint for an all-in-one HP Officejet 6500 E709a.

Similar Questions

• All-in-one HP Officejet 6500 has: paper size or the type of error message problem

  I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
  I get a paper mismatch (type and paper size is incorrect) error message.
  The printer is not connected to the internet, but it is connected by a USB cable to the computer.
  I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
  This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
  Thanks for your help.

  17/03/2015 #2

  I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

  Thanks for your help,

  LK

• Update the firmware on Mac. Help, please.

  I've searched for quite awhile and has trouve.22 for mac update .zip file. However, I can't find the last file from .zip to update firmware for mac. You could someone please give me a link for that?

  Even tried it on Windows, but the update will fail. I have read many post saying "forget the updater, do it manually." How to do when I can't find the update file?

  Please help me guys.

  //

  Another question, some Mp3 files appear on the "rocket" but do not play. The "rocket" ignores the files about 50 who play very well on the computer. Why is this?

  The Zip file is not specific to the platform. The way I unzipped stuff on my old Mac OS (granted, I was using the old OS 9, so it may be different for you) was using StuffIt Expander. If you do it this way, you should be fine.

• Failed to update the firmware SFE2000p

  Hi all

  I tried to update the firmware of a linksys switch sfe2000p but missed her at one point and now it keeps restarting tries to install the new firmware.

  Is there a way to solve this, I read out there that this switch has the ability to return to the previous firmware when something is wrong, but in this case he never install the previous version.

  Thank you

  Osmodiar

  Large. Basically, there are two ways to update the firmware. Use the Web based configuration of the SGE2000P or via the serial port xmodem page

  Configuration. If in case there are instances that you aren't able to access Web configuration page of the switch, you can upgrade the

  firmware using the serial port and access the configuration of xmodem, and that's what you were doing.

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• Update the firmware without success

  Help!

  I updated the Firmware of my CLJ2840 all in one and the device is now insensitive:

  Device: HP CLJ 2840

  Installation: network printer

  OS: Win 7

  Drivers: Installation of the Standard Win 7 drivers

  I downloaded the file 2800_Series_FW_Update - 20120307.exe on the HP support site.

  I followed the instructions to the letter.

  I waited for the installation of the firmware to complete in its entirety

  I have noticed the messages shown on the device LED panel that followed the procedure.

  I noticed the face smiling at the end of the installation on the computer

  Result:

  Feature cycles as follows:

  1 turn on

  Toner of cycle 2 drums as usual

  3 LED panel shows marks in the upper part

  4 LED flashes once and 3 LED bars begin to scroll from right to left...

  5 witness bright and alert light stay lit

  6 this continues for about a minute... then the cycles of line 3... over and over again

  The device is no longer visible on the network

  HOWEVER

  Even invisible on the network, I managed to run the program from firmware to success... a second time.

  Help, please!

  Our office is stuck without this printer.

  Thank you

  Hey Rota, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• I have Win XP Pro aiinstalle and work for a while, I updated the firmware CD, now, it's asking to reactivate windows.

  I've updated the firmware CD now it asks for a product key, I used this laptop for severla months, I get the message that the key has been used too many times and you need a new key.  I bought the laptop from a company farm selling off its old stock.

  Try what it sounded just like it has been reinstalled several times.
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.

  I hope this helps.

• Disk image to update the firmware in linux?

  I recently bought the a Ultra II SSD 240 GB and I wanted to make sure I'm using the latest firmware. To my surprise, there is no way to update the firmware in Linux.

  My current firmware version is X31200RL (the description of disk indicates this)

  It is the most recent?

  Are there links to the upgrade image that I missed? Even if you can confirm that I am on the latest firmware at the moment, I would like to be able to improve in the future if a new appears.

  A simple link to download the iso file would be sufficient, given that most Linux users are users anyway.

  Thank you

  you have the last FW for the Ultra II SSD. If a FW is released sandisk ISO messages which can be burned on a CD to update on Mac and Linux on this forum and the sandisk knowledge base.

• Update the firmware from E4200v2 to 2.0.37.131047

  I hope that I don't have a big mistake buying Cisco... I just bought 3 routers E4200v2. As I am preparing to install, I try to update the firmware of 2.0.26-> 2.0.37.  I downloaded the zip file from the site of Cisco technical support and when unzipped the file is named FW_E4200_2.0.37.131047.SSA. When I try to do a manual update of the Admin page, I immediately get an image file is incorrect error.

  I downloaded the file three times in total on 2 separate networks and have tried three different browsers to try the update, with the same error. Support chat sessions proved worthless, they seem very scripted and the last of them has always tried to sell me a support contract...

  I want to stay with the classic firmware, even if there is no current bugs. Someone at - it a 'good' copy firmware 131047? It seems to me that one on the Cisco site is broken.

  You can rename the file FW_E4200_2.0.37.131047.SSA in FW_E4200_2.0.37.131047.IMG or update the automatic firmware on the router page (this 2.0.37.131047 firmware will allow you to update manually to 2.1.38.138880).

• LaserJet MFP M127fn Pro: Unable to update the firmware on M127fn

  Hi and thanks for the support.

  I can't update the firmware.

  I downloaded firmware update and it launched.

  It does not find the printer.

  I'm sure that the rated requirements.

  I can print.

  It is turned on and connected via USB.

  He does not sleep.

  There seems to not be any error/malfunction.

  I tried as an administrator.

  I have some unrecognized devices in Device Manager. Perhaps, which could be related? Something with the USB drivers, maybe?

  Hi mightyiam ,

  Thanks for letting me know. Since you are able to print with the older USB cable, it should not be a problem. Now if you had intermittent printing problems, then it could very well be caused by the cable. If you have a spare a kicking around, you could try, just to exclude.

  As the firmware will not update, I suggest to call our technical support at the 800-474-6836 and inquire about a replacement printer. If you don't care to worry about the update of the firmware, you can decide what you want to do. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you.

• update the firmware on 1815dn

  Dell technical support had me download 3 files to get win7 manual and correct drivers yesterday. One of them has proved to be a updated firmware for the printer.

  after update, the printer screen showed (initialization of the system) and wouldn't do anything. technical support is not smart enough to know how to perform the update of the firmware, I thought about it this morning on my own. printer off and press and hold the x button (cancel) all by turning on the device. the printer then entered in download mode, installed the update of the firmware and now works again.

  bigddv,

  Thanks for the update. I remember that some laser printers, you need to update the firmware in steps, where this information is needed.

  You shouldn't go to firmater 01 to 04 firmware, without having to first install the 02 and 03.

  Rick

• Update the Firmware on SG200-18

  I need to update the firmware on the SG200-18 to the latest version. Which of these links, and subsequently, what file I need to download for that (I just need English)?

  http://software.Cisco.com/download/type.html?mdfid=283783779&flowid=24309

  Thank you!

  Hello

  You are in the right place, you want to select the SMART switch firmware.  The MIB are SNMP, so you don't need to enter those unless you have to.  Once you click on the scroll to the bottom of the list and select:

  SX200 Firmware Version 1.3.7.18 
  sx200_boot - 13506.rfb

  and

  SX200 Firmware Version 1.3.7.18 
  sx200_fw_1.3.7.18.Ros

  You will need to update the firmware as well as the startup code.  I suggest doing both and then just restart once.  Note that the startup code requires TFTP to transfer, I usually use TFTPD32 for this.

  We also have a little longer then usual for the switch to reboot when first upgrade you the firmware, because it made some changes to the file system internal to the switch. If you are comforted in you can watch the progress.  Once you start to feel it takes too much time, wait a few minutes and it should come up (I waited for a good number of these improvements in the laboratory).

  Hope that helps,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Update the Firmware SG500 - 52p

  I downloaded the new firmware for the SG500.   In my view, there are two files included in the download, a startup file (rfb), and the image of the regular firmware (ros).   I looked and that you haven't seen something on the files of rfb.   I know this is a start of the file, but do not know if I should update the boot file first, then the firmware image or vice versa.   In addition, in my update on the SG500 screen, the boot file option is grayed out.  Maybe if I update the firmware first, then the boot file will be ungreyed?

  Hi J, the boot image should not be the matching. Pre-production releases usually required special startup code upload procedures but post-production release switches (switch you purchased) start-up codes must load with the images of the firmware.

  You should be able to load 1.3.0.59 software without problem.

  If for any reason, the startup on the switch code is messed up, the switch would probably get RMA as field boot-recovery has still not supported.

  I can tell you of my experiences of preproduction, the start-up codes is not something you want to face.

  -Tom
  Please mark replied messages useful

• Update the Firmware Officejet 7310?

  Like my Officejet 7310 and recently took a used for children.

  The network shows Configuration Page printing "Firmware revision: RL7001xNx" on the unit used while my original unit shows "Firmware revision: RL9002xNx '"»

  Is there a way to update the Firmware of the unit used for the RL9002xNx version?

  I'm not finding a way to update the Firmware via the Sites from HP Support...

  Any suggestions?

  Thank you!

  My PC is always Windows XP SP3 but I added three laptop computers for the children and women who have Windows 7 and I had all the HP7310 installation problems or the center of HP solutions on their machines.  Make sure you get the Windows 7 "32 or 64 bit" depending on your system).

  My initial concern about requiring the update of the Firmware has actually been resolved, I think.

  Printer was running very slow and hesitant, I thought could have been due to Firmware.

  Found on another blog the suggestion to clean the sensor 'media' (red laser on the side of the cartridge carriage).  It worked and I'm very happy with the results!

• Update the firmware on PowerEdge R815 for H700 - how?

  I want to update the firmware H700 integrated into my new 12.0.1 R815 - 0091 to 12.3.0 - 0032.

  My first thought was to start from Systems Build and Update Utility with a copy of the am630_suu_a00.iso that I had downloaded, concatenated, and copied onto a portable hard drive connected to a USB port.

  It worked well for the ports of Broadcom, but when he reached the R815 BIOS and firmware H700, he'd say he was going to update and then say that it would restart (confusingly telling me to 'remove all media startup' but I'm pretty sure that the DVD SBUU was supposed to stay, since the instructions say to keep start-up it until all updates are done). However, the machine simply restarted. It did not save pending updates to a partition so he could update at the start, and he did not ask me to insert a USB key for storage (implied by the text that flashes quickly by on the screen after you click Apply). I found myself on-screen SBUU once again, and firmware updates were not managed.

  Finally, I gave up this approach. I thought maybe I could run the updates directly on the SUU volume but I had installed Windows Server 2008 R2 x 64 and SUU files run apparently only for x 86.

  So I installed the x 86 version of Windows Server 2008 and now I can click on suulauncher.exe and run it as an administrator. SUU 6.3.0.267 launches and usefully shows me the updates of the firmware, I need, and I can choose them. But when I click on the button to update and I confirm that these updates will happen, absolutely nothing happens. You can see a screenshot here where I'm about to click on: http://imgur.com/R8jzm to reading online, I think that a progress bar is supposed to be coming up next. I looked at the C:\Dell\suu\support.log file and it says the following:

  FINE: com.dell.suu.cm.BundleProcessor.processUpdateButtonEvent (SystemBundlePath) is G:\.\repository\PER815-WIN-R258158. XML

  WARNING: com.dell.suu.cm.CustomBundleXMLGenerator.generateBundleXML)

  An error occurred during the transformation of this when creating the custom XML part

  I thought that maybe I had a SUU image corrupted, so I re-extract ISO but got the same error.

  Then I thought, why not just run the stand-alone package update RAID_FRMW_WIN_R269685.exe (using run as administrator). It's very encouraging, but then he says "This update Package is not compatible with the configuration of your system." Why is it not compatible? I have a built-in H700.

  I am clearly out of my League here. Others really spend several days trying to update the firmware? I'm leaving on the parts where I create a bootable USB key with BACK and try to run the DOS version of the update of the firmware MegaFl.exe, only to discover that the FW872I.rom file is not found, and the parts where I break down crying.

  Any advice would be greatly appreciated. Before go me crazy.

  was there a particular reason that you have run RAID_FRMW_WIN_R269685.exe? You must run RAID_FRMW_WIN_R269684.exe instead.